How to get working new WLAN card on my Satellite P105-S6024?

Welcome
My laptop is:
Toshiba Satellite (17 inches)
P105-S6024
I had a processor
Processor
Intel Core Duo Processor T2050
(2M Cache, 1.60 GHz, 533 MHz FSB
The following bios from another laptop that has intel T7400 processor
Intel Core 2 Duo Processor T7400 (4M Cache, 2.16 GHz, 667 MHz FSB)
I use the following bios with another laptop
supports Intel T7400
bios-20090304153829.ZIP
http://support1.toshiba-tro.de/tedd-files2/0/bios-20090304153829.ZIP
Currently I have a wifi card
actual
Intel Model: WM3945ABG MOW1
P / N PA3489U-1mpc
IC: 248H-DPA3489W
FCC ID: CJ6UPA3489WL
Toshiba P / N: G86C0001U910
Toshiba S / N: WC362560621
I bought a new wireless card
Advanced Intel Centrino-N 6200
Half Size PCI Express Mini Card
Model: 622ANHMW
D P / N: 02GGYM REV A00
CN-02GGYM-70223-03K-02SQ-A00
I put on and turned on the laptop.
Unfortunately, only the fan and the screen went black
Nothing on the screen is not displayed
Windmill walk
and DVDRW Drive
I switch off wifi
This card is less than half orginalna intel 3945 wifi
But it came, it includes two cables.
Does anyone here on the forum to advise me how to change the bios?
To wifi card intel 6200 go?
Why not remove the white list?
Why isolate the pins wifi card?
Maybe adding a new card to the BIOS?
Please help
and thank you in advance
Ps.
My laptop is P105-S6024 has a different bios from another model laptop, because I have changed the CPU from Intel in 2050 for just such a T7400.Bios +intel T7400 +intel wireless 6200 would have to be modified for a new card intel 6200th
Message was edited by: krzysiekrk

You do not need three anten to N
I also have a Sony VAIO laptop and there is a wifi card intel 5100 N (for 300Megabit / s) and plugged the two antennas.
3 if the card has the antenna and the laptop
is needed to 450Megabit / s
which is probably wifi intel 5300 and intel 6300 wifi
For this you need a router 450megabit
This card Advanced Intel Centrino-N 6200
which would use the Toshiba P105-S6024 also has 2 entrances to the antenna. The laptop has two antennas.
The problem lies in the bios toshiba laptop.
Bios adopt certain cards (so-called white list),
I must have deleted the bios white list, or to teach a new wifi card intel 6200
How do I do?
I'm almost 101% sure that the card must match
You have to modify the bios

Similar Messages

  • HT201328 How to unlock iphone before you get a new sim card?

    I read the article on unlocking the iphone 4, and got permission from the carrier to unlock it.  But the instruction assume you already have a 2nd / diferent sim card.  How do you unlock the iphone before you get a new sim card?  I.e, as in unlocking it before going overseas where you will purchase a country specific sim card? 
    Thanks,
    Bobj.

    I restored my AT&T locked iPhone without a different sim, & got the congratulations screen. So, do this:
    1. Sync your phone to create a current backup.
    2. When finished, hit the "Restore" button.
    3. When done, you should get the "Congratulations" screen.
    4. If you do, restore your phone from the backup you made when you started.
    5. Sync your content back to your phone.
    That's it. You're done.

  • I need to get a new wifi card for my mac air. do i have to buy this from a apple store? i live fare away from an apple store.

    I spilled some red wine on my keyboard and i cannot connect to the internet any more. it says on the internet icon: Wi-fi: no harware installes. so i guess i need to get a new wifi card for my mac air. do i have to buy this from a apple store? i live fare away from an apple store. Also, I do have a macbook with software system:
    System Version:          Mac OS X 10.6.8 (10K549). can I take out the wifi card from that mack and use that one for my mac air?

    Welcome to Apple Support Communities
    Consider yourself lucky that your MacBook is still working. Now, turn it off. Wine may have damaged other parts of your computer.
    Then, take the MacBook to an Apple Store or reseller. It will be a very expensive repair, as it's not covered by warranty and the logic board has to be replaced. In some cases, it may be better to get a new MacBook.
    If you can't take it to an Apple Store, contact with Apple > http://support.apple.com/kb/HE57

  • How can i off my dictionary message?and how to get a new apple id?

    how to off my dictionary in message???how can i off my dictionary message?and how to get a new apple id?

    Your post indicates a very old iOS version.  I don't know if it would work there, but in the current iOS (6.0.1), you can turn off auto-correction at Settings > General > Keyboard > Auto-Correction (off).
    You can manage your Apple ID at: http://www.apple.com/support/appleid/

  • Should I get a new video card?

    Hello,
    I currently have a Power Mac G5 with dual 1.8 GHz processors and the GeForce 5200 video card.
    I have Final Cut Studio 2 and I cannot use Color.
    Not being able to use Color is not a deciding factor at this point for getting a new video card, but I just purchased a new Canon XH-A1.
    So from now on I will be editing in high definition. My main question is: Will getting a better video card effect render times, or is that strictly how fast your processor is?
    If I should get a new video card and am not looking to spend a whole lot of money, what kind of video card would be reccomended? Also, is there such thing as third party companies making video card for Mac computers like, for example, EVGA does for windows computers?
    Any help would be appreciated thanks!

    Hi:
    Will getting a better video card effect render times, or is that strictly how fast your processor is?
    More memory will NOT give you better render times. You'll get better performance on using FxPlug (GPU accelerated) effects in FCP.
    Motion is almost "unusable" with your standard GeForce 5200.
    About GPU upgrade options read this thread:
    http://discussions.apple.com/message.jspa?messageID=5573844#5573844
    Hope that helps !
      Alberto

  • How to get my new in-car entertainment system to recognise my old 20g iPod by usb connection

    how to get my new in-car entertainment system to recognise my old 20g ipod by usb

    Hi albri51!
    I have an article for you that can help you with that question. The article is about troubleshooting car stereo connections, and can be found right here:
    iOS: Troubleshooting car stereo connections
    http://support.apple.com/kb/TS3581
    Hope this helps. Thanks for using the Apple Support Communities!
    Cheers,
    Braden

  • I need a code for verifiing my emailadress. How do get a new one ?

    Photoshop Elements 12
    Share
    Try to send email directly from Photoshop elements
    The program ask for a code to verifiing my emailadress
    I need a code for verifiing my emailadress. How do get a new one ?

    Check your email.  The screen capture says that they sent one to the email address listed.

  • How to get work JavaFX WebViewBrowser sample in debian linux wheezy?

    How to get work JavaFX WebViewBrowser sample in debian linux wheezy
    You may also check latest version of this problem here... 
    The Starting point I have
    Debian wheezy
    java version "1.7.0_40"
    Java(TM) SE Runtime Environment (build 1.7.0_40-b43)
    Java HotSpot(TM) Client VM (build 24.0-b56, mixed mode)
    GTK version: 2.24
    NetBeans 7.3.1
    Certified configuration acording to JavaFX Supported Configurations
    is
    Ubuntu 10.4 +
      gtk2 2.18+
    GTK is OK. do I require ubuntu?
    first try: by  downloading Java SE Downloads - javafx sample
    Let's try it
    zolta@zolta:~/dolgaim/IT/NetBeansProjects/javafx/javafx-samples-2.2.40$ java -jar SwingInterop.jar
    # A fatal error has been detected by the Java Runtime Environment:
    #  SIGILL (0x4) at pc=0x9b6b4c22, pid=21172, tid=2658700144
    # JRE version: Java(TM) SE Runtime Environment (7.0_40-b43) (build 1.7.0_40-b43)
    # Java VM: Java HotSpot(TM) Client VM (24.0-b56 mixed mode linux-x86 )
    # Problematic frame:
    # C  0x9b6b4c22
    # Core dump written. Default location: /home/zolta/dolgaim/IT/NetBeansProjects/javafx/javafx-samples-2.2.40/core or core.21172
    # An error report file with more information is saved as:
    # /tmp/hs_err_pid21172.log
    # If you would like to submit a bug report, please visit:
    #   http://bugreport.sun.com/bugreport/crash.jsp
    # The crash happened outside the Java Virtual Machine in native code.
    # See problematic frame for where to report the bug.
    Terminated
    Let's see what core dump says
    to be continued...

    Gusar wrote:
    We need *a lot* more info than that. Could be something very simple, like the interface being up before starting wifi-menu (netctl doesn't like the interface being up, it'll only start correctly if the interface is down).
    Or it could be something more. In which case, you'll need to start wpa_supplicant manually with debugging enabled:
    wpa_supplicant -i wlp18s0b1 -c <(wpa_passphrase MYSSID passphrase) -d
    Once this says you're connected, open another terminal and start dhcpcd. Or, if wpa_supplicant doesn't manage to connect, post the *entire* output.
    Edit: Ok, you posted more info as I was writing my post. Will look through that, maybe it contains something useful. If not, follow the instructions above.
    Edit2: Nope, nothing about wireless in there, except that the driver loaded.
    It worked!!
    I was looking into the logs and found an authentication failure...my password is very long so I made some mistakes while typing it.
    So this is the solution all the way:
    SOLUTION:
    - No need to install or load any external drivers (all I used was already in the base installation)
    - DISABLE THE HIDDEN NETWORK OPTION IN THE ROUTER (thanks for the heads-up @Gusar)
    - run "# wifi-menu"
         or
           "# wpa_supplicant -i [interface] -c <(wpa_passphrase MYSSID passphrase) -d"
    - run "# dhcpcd [interface]"
    - Good to go!!
    I'm sorry for the trouble guys, and like I imagined, it was really easy and now I see my newbiness hahaha ;D
    Thanks.

  • How to get the new dependency SCA's related to  7.4 version with out upgrading NWDI server

    Hi
    We are in process of upgrading the custom webdynpro and portal components to SAP Portal  7.4.
    I saw in some discussions that, we don't need to upgrade NWDI , we need to install new JDK version(1.6) to map that jdk to the new track for migrating the custom component to new track.
    But i have questions related to NWDI track dependency files.
    When i create new track to support 7.4 components need to be available in the respective track.
    we have central SLD and we create all the product and custom software components in that SLD(7.01) itself , To create the custom software component in SLD , i add  required dependency files. once the software component is ready, when i create the track  in nwdi system i will be able to fetch the custom software component in nwdi system by click on cms update.
    But now i  need following new new dependency software component versions   in SLD  related to  7.4 for creating new software component to those dependency's to support the new track in NWDI.
    EP_BUILDT
    SAP-JEE
    SAP_BUILDT
    SAP_JTECHS
    But my SLD server version is : 7.01 version.
    so do i need to upgrade the SLD server to  7.4 get the latest dependent SCA's  or just need import new SLD content in SLD server to add new custom software component to create?
    kindly advice how to get the new software components  in SLD without upgrading the NWDI  & SLD system to  7.4
    Thanks

    Jun,
    Thanks for the reply.
    But i am not able to find the  following two SCA's related to 7.4 version. I am able to find the rest of the SCA's. I able to see only 7.02 version related to following dependency files.
    SAP-JEE
    SAP_JTECHS
    SAP-EU (CA EU)  ( having only 7.01, 7.02, 7.10, 7.11 and 7.20) related to Guided procedures.
    Did they changed any naming conventions related to these software components? if so what are new software compnents names to use
    Please clarify.
    Thanks
    Vijay

  • I sent my Iphone 5c in for repair and when they sent it back my sim card wasn't in it is there any way i can have them send it back or do I need to get a new sim card for it?

    I sent my Iphone 5c in for repair and when they sent it back my sim card wasn't in it is there any way i can have them send it back or do I need to get a new sim card for it?

    You'll have to get a new one from your carrier. I believe the shipping instructions for mail in service explicitly tell you to take it out as you will most likely not receive the same phone back. Apple doesn't repair most phones, they replace them.

  • My mac recently got stolen, after getting a new one i had to reinstall logic studio, but after moving house i have lost the serial number, does anyone know how to get a new one?

    my mac recently got stolen, after getting a new one i had to reinstall logic studio, but after moving house i have lost the serial number, does anyone know how to get a new one?

    Here:
    http://support.apple.com/kb/HT1861

  • HT4623 How do I update new credit card on iPad

    How do I update new credit card on iPad 2 , other instructions do not apply to iPad 2!

    Change Payment Information
    Settings>iTunes and App Stores>Apple ID>View Apple ID>Sign-in>Payment Information

  • Hello i lost the email necessary to verify my i cloud account.i don t know how to get a new one...any ideas?

    hello
    i lost the email message sent to me for vrifiying my i cloud account and i don t know how to get a new one...
    any ideas???

    Welcome to the Apple Community.
    Put in a request for another verification e-mail to be sent to you.
    Start here, change your country if necessary and go to manage your account.
    Also check your Mail rules and filtering, the verification mail may be going to a junk folder or even being deleted altogether. You may also wish to contact your mail provider to see if their spam filters are removing the email before it gets to you.

  • I'm trying to make a holiday card, but can't figure out how to get photos into the card.

    I'm trying to make a holiday card, but can't figure out how to get photos into the card.

    Selectto( s) and create the card - if you want to add more photos ot it drag then to the card project in the source pane on the left
    LN

  • HT1918 How to setup a new credit card on iTunes

    How to put a new credit card on my iTunes

    You can log into your account on your computer's iTunes via the Store > View My Apple Id menu option, and on the screen that you are taken to there should be a link for payment information. You might also be able to do it on your iPhone by tapping on your id in Settings > Store and viewing your account

Maybe you are looking for

  • IPhoto Library very slow to open

    Hi all, I am having a very difficult time with iPhoto5 and the size and therefore performance of my library. I have years worth of photo's (>10,000) and iPhoto takes forever to open and do simple tasks. Please help me with a two part question. 1) Is

  • How to delete requests from OIM 11g R1?

    Hello, We have some requests that were created in production environment while the SOA environment were not configured correctly, so some are with failed state, some were tests that were completed successfully. So now the client will soon be audited,

  • Transaction Processor Error in View Pending Transactions

    Dear All, I am getting the Error: "Transaction Processor Error" in View Pending Transactions. How can I identify due to what reason, this error had occured because of this I am not able to close the inventory period for these transaction months.. and

  • Usage Tracking Setting error

    Hi Experts, I'm trying to set Usage Tracking in BIEE11.1.1.6, I met with some problem and need your help. I built the S_NQ_ACCT table in a seperated DB other than the one where repository metadata was. I imported the table into my repository and conf

  • PO UPLOAD - CATT

    Hi, Can any one give the best method for upload the PO data's? as well, pls explain abt CATT and is it good for upload a mass records ? pls give me step by step guide with screen shots. Rgds Kumar