How to get y axis value(in a numeric control) by providing x-axis value using wave graph

Hi,
I'm new here, Sorry if i have selected wrong Location.
I want to get Y-axis value (in a numeric Control) by providing X-axis Value using Wave graph.
i want to do calculations with the obtained value.
i have attached File and Snapshot.

Well, you are using the Dynamic Data Type, which I almost never use, but if you convert the data to a WaveForm (using From DDT on the Signal Manipulation Palette, which is a choice when you right-click on the DDT Wire), you should be able to do this. Do you know about how Waveforms are stored? They are a Cluster, with t0 being a TimeStamp for the start of the Waveform, dt being the time step, and Y being the samples. So if you want a point at 0.5 seconds and dt is 0.001, you would pull out the point at Index 499 (offset 0) from the Y array.
Bob Schor

Similar Messages

How to get STPOV structure values using BOM number and Plant number

hello All,
could you please help me out
'How to get STPOV structure values using BOM number and Plant number'
is there any function module where can i give input as bom and plant number .
waiting for your response.
regards
srinivas

I did a quick where-used lookup in SE11 on the structure STPOV in function module interfaces and came up with the following:
Function Module                             Short Description
CK_F_TOTALCOST_COMPUTE
CS_ALT_SELECT_COUPLED_PRODUCT
CS_WHERE_USED_CLA                Bills of material; class use
CS_WHERE_USED_CLA_ANY        Bills of material; direct class use or via other class
CS_WHERE_USED_CLA_VIA_CLA        Bills of material; class use via classes
CS_WHERE_USED_COP
CS_WHERE_USED_DOC                Bills of material; document use
CS_WHERE_USED_DOC_ANY:Bills of material; direct and (indirectly) document use via
CS_WHERE_USED_DOC_VIA_CLA        Bills of material; document use via classes
CS_WHERE_USED_KNO                Bills of material; use object dependency
CS_WHERE_USED_MAT                Bills of material; where-used list
CS_WHERE_USED_MAT_ANY:Bills of material; where-used list as article or class item
CS_WHERE_USED_MAT_VIA_CLA        Bills of material; where-used list via classes
EXIT_SAPMC29M_001                BOM; Article Where-Used List
It appears that this structure is primarily used for where-used look-ups for components within the BOM. I don't know if any of these are what you're in need of.
Hope this helps,
Mark Schwendinger

How to get Metadata column values using powershell(CSOM)

Hi,
I am trying to get list column values using Powershell (CSOM), but I am getting for Metata data columns.
I am getting internal value as System.Collections.Generic.Dictionary`2[System.String,System.Object]
Can anybody let me know how to get the values for metadata columns?
Any help would be greatly appreciate.
Thank you.
AA.

Hi
Go through the links. It'll help.
SharePoint 2013 Code Tips – Setting a Managed Metadata Field with the Client Object Model(CSOM and JSOM)
Indul Hassan
Microsoft Community Contributor
http://www.indulhassan.com
You Snooze.. You Lose !!

How to get all the values from the dropdown menu

How to get all the values from the dropdown menu
I need to be able to extract all values from the dropdown menu; I know how to get all those values as a string, but I need to be able to access each item; (the value in a dropdown menu will change dynamically)
How do I get number of item is selection dropdown?
How do I extract a ?name? for each value, one by one?
How do I change a selection by referring to particular index of the item in a dropdown menu?
Here is the Path to dropdown menu that I'm trying to access (form contains number of similar dropdowns)
RSWApp.om.GetElementByPath "window(index=0).form(id=""aspnetForm"" | action=""advancedsearch.aspx"" | index=0).formelement[SELECT](name=""ctl00$MainContent$hardwareBrand"" | id=""ctl00_MainContent_hardwareBrand"" | index=16)", element
Message was edited by: testtest

The findElement method allows various attributes to be used to search. Take the following two examples for the element below:
<Select Name=ProdType ID=testProd>
</Select>
I can find the element based on its name or any other attribute, I just need to specify what I am looking for. To find it by name I would do the following:
Set x = RSWApp.om.FindElement("ProdType","SELECT","Name")
If I want to search by id I could do the following:
Set x = RSWApp.om.FindElement("testProd","SELECT","ID")
Usually you will use whatever is available. Since the select element has no name or ID on the Empirix home page, I used the onChange attribute. You can use any attribute as long as you specify which one you are using (last argument in these examples)
You can use the FindElement to grab links, text boxes, etc.
The next example grabs from a link on a page
Home
Set x = RSWApp.om.FindElement("Home","A","innerText")
I hope this helps clear it up.

How to get the selected values from a selectmanylistbox?

Hi ADF Experts,
<af:selectManyListbox label="Label 1" id="sml1" partialTriggers="cb2"
                        value="#{viewScope.TestBean.lovValue}"
                  autoSubmit="true"      valuePassThru="true">
    <f:selectItems value="#{viewScope.TestBean.actualList}" id="si1"
                   binding="#{viewScope.TestBean.selectedItems}"/>
</af:selectManyListbox>
<af:commandButton text="get selected values" id="cb3"
                    actionListener="#{viewScope.TestBean.getSelectedValues}"
                    partialSubmit="true"/>
private List<String> lovValue;
private List<SelectItem> actualList;
//getters and setters
public void getSelectedValues(ActionEvent actionEvent) {
    // Add event code here...
    for (String selectedItem : lovValue) {
        System.out.println("Selected item: " +selectedItem.); // this is giving 1 and 3 like this. how to get the checked values as I'm getting only the indexes. In this scenario I am populating the list programmatically.Just I wanted to know how can we get the selected values(not indexes). Please suggest.
Thanks-
Abhijit

Hi Timo,
As I am sharing the page fragment and the Java class. So its my usecase I have mentioned below
I am sharing the jsff page fragment and java class. So that it wud be of help to others.
jsff page fragment
<?xml version='1.0' encoding='UTF-8'?>
<jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.1"
          xmlns:af="http://xmlns.oracle.com/adf/faces/rich"
          xmlns:f="http://java.sun.com/jsf/core">
        <af:panelGroupLayout id="pgl1">
          <af:commandButton text="Search" id="cb1"
                            actionListener="#{viewScope.TestBean.searchSupplier}"/>
</af:panelGroupLayout>
    <af:popup id="p1" binding="#{viewScope.TestBean.searchSupplierPopup}">
          <af:dialog id="d2"
                     type="none">
           <af:table value="#{bindings.Contacts.collectionModel}" var="row"
                  rows="#{bindings.Contacts.rangeSize}"
                  emptyText="#{bindings.Contacts.viewable ? 'No data to display.' : 'Access Denied.'}"
                  fetchSize="#{bindings.Contacts.rangeSize}"
                  rowBandingInterval="0"
                  binding="#{viewScope.TestBean.tsupportIssues}"
                  filterModel="#{bindings.ContactsQuery.queryDescriptor}"
                  queryListener="#{bindings.ContactsQuery.processQuery}"
                  filterVisible="true" varStatus="vs"
                  selectionListener="#{bindings.Contacts.collectionModel.makeCurrent}"
                  rowSelection="multiple" id="t1">
          <af:column sortProperty="name" filterable="true" sortable="true"
                     headerText="#{bindings.Contacts.hints.name.label}" id="c2">
            <af:outputText value="#{row.name}" id="ot1"/>
          </af:column>
          <af:column sortProperty="email" filterable="true" sortable="true"
                     headerText="#{bindings.Contacts.hints.email.label}"
                     id="c1">
            <af:outputText value="#{row.email}" id="ot2"/>
          </af:column>
        </af:table>
      <af:commandButton text="OK" id="cb5" partialSubmit="true"       actionListener="#{viewScope.TestBean.testMethod}"/>
      <af:commandButton text="Cancel" id="cb6"
                        actionListener="#{viewScope.TestBean.cancelPopupSearch}"/>
    </af:dialog>
        </af:popup>
<af:selectManyListbox label="Label 1" id="sml1" partialTriggers="cb5"
                        value="#{viewScope.TestBean.lovValue}"
                  autoSubmit="true"      valuePassThru="true"
                        binding="#{viewScope.TestBean.prp1}">
    <f:selectItems value="#{viewScope.TestBean.actualList}" id="si1"
                   binding="#{viewScope.TestBean.selectedItems}"/>
</af:selectManyListbox>
<af:commandButton text="get selected values" id="cb3"
                    actionListener="#{viewScope.TestBean.getSelectedValues}"
                    partialSubmit="true"/>
<af:commandButton text="remove selected" id="cb4"
         partialSubmit="true"           actionListener="#{viewScope.TestBean.removeSelectedValues}"/>
</jsp:root>
TestBean.java
package com.demo.view;
import java.util.ArrayList;
import java.util.Iterator;
import java.util.List;
import javax.faces.component.UISelectItems;
import javax.faces.event.ActionEvent;
import javax.faces.model.SelectItem;
import oracle.adf.model.BindingContext;
import oracle.adf.model.binding.DCBindingContainer;
import oracle.adf.model.binding.DCIteratorBinding;
import oracle.adf.view.rich.component.rich.RichPopup;
import oracle.adf.view.rich.component.rich.data.RichTable;
import oracle.adf.view.rich.component.rich.input.RichSelectManyListbox;
import oracle.adf.view.rich.context.AdfFacesContext;
import oracle.adf.view.rich.event.DialogEvent;
import oracle.jbo.Key;
import oracle.jbo.Row;
import oracle.jbo.RowSetIterator;
import org.apache.myfaces.trinidad.model.RowKeySet;
public class TestBean {
private RichTable tsupportIssues;
private List<SelectItem> lovValue;
private List<SelectItem> actualList;
private RichSelectManyListbox prp1;
private List valuesChoosed = new ArrayList();
private UISelectItems selectedItems;
private RichPopup searchSupplierPopup;
    public TestBean() {
    super();
public void setTsupportIssues(RichTable tsupportIssues) {
    this.tsupportIssues = tsupportIssues;
public RichTable getTsupportIssues() {
    return tsupportIssues;
public void testMethod(ActionEvent actionEvent) {
    // Add event code here...
    // For learning purposes - show Select Many Button clicked
     System.out.println("Select Many Button has been Clicked");
    // // RowKeySet Object can hold the selected rows from a user as follows
    RowKeySet rksSelectedRows =         this.getTsupportIssues().getSelectedRowKeys();
    // Iterator object provides the ability to use hasNext(), next() and remove() against the selected rows
    Iterator itrSelectedRows = rksSelectedRows.iterator();
    // Get the data control that is bound to the table - e.g.
    // OpenSupportItemsIterator
    DCBindingContainer bindings =         (DCBindingContainer)BindingContext.getCurrent().getCurrentBindingsEntry();
    DCIteratorBinding dcIteratorBindings =         bindings.findIteratorBinding("findAllContactsIterator");
    // Information from binding that is specific to the rows
    RowSetIterator rsiSelectedRows =         dcIteratorBindings.getRowSetIterator();
    // Loop through selected rows
    int i=1;
    while (itrSelectedRows.hasNext()) {
      // Get key for selected row
      Key key = (Key)((List)itrSelectedRows.next()).get(0);
      // Use the key to get the data from the above binding that is related to the row
      Row myRow = rsiSelectedRows.getRow(key);
      // Display attribute of row in console output - would generally be bound to a UI component like a Label and or used to call another proces
      System.out.println(myRow.getAttribute("name"));
      valuesChoosed.add(myRow.getAttribute("name"));
//        actualList = new ArrayList<SelectItem>();
//        String j = Integer.toString(i);
//        actualList.add(new SelectItem(j, (String)myRow.getAttribute("name")));
//      i++;
       searchSupplierPopup.hide();
      AdfFacesContext.getCurrentInstance().addPartialTarget(prp1);
public void setLovValue(List<SelectItem> lovValue) {
    this.lovValue = lovValue;
public List<SelectItem> getLovValue() {
    return lovValue;
public void setActualList(List<SelectItem> actualList) {
    this.actualList = actualList;
public List<SelectItem> getActualList() {
    actualList = new ArrayList<SelectItem>();
    if(valuesChoosed.size()!=0){
    for(int i=0;i<valuesChoosed.size();i++){
      actualList.add(new SelectItem(valuesChoosed.get(i), (String)valuesChoosed.get(i)));
    else{
      actualList.add(new SelectItem("1","Select One"));
    return actualList;
public void setPrp1(RichSelectManyListbox prp1) {
    this.prp1 = prp1;
public RichSelectManyListbox getPrp1() {
    return prp1;
public void setValuesChoosed(List valuesChoosed) {
    this.valuesChoosed = valuesChoosed;
public List getValuesChoosed() {
    return valuesChoosed;
public void getValues(ActionEvent actionEvent) {
    // Add event code here...
    for(int i=0;i<valuesChoosed.size();i++){
      System.out.println(valuesChoosed.get(i));
public void getSelectedValues(ActionEvent actionEvent) {
    // Add event code here...
     for(int i=0;i<this.getLovValue().size();i++){
         System.out.println("Selected Value:"+this.getLovValue().get(i));
public void removeSelectedValues(ActionEvent actionEvent) {
    // Add event code here...
public void setSelectedItems(UISelectItems selectedItems) {
    this.selectedItems = selectedItems;
public UISelectItems getSelectedItems() {
    return selectedItems;
    public void setSearchSupplierPopup(RichPopup searchSupplierPopup) {
        this.searchSupplierPopup = searchSupplierPopup;
    public RichPopup getSearchSupplierPopup() {
        return searchSupplierPopup;
    public void cancelPopupSearch(ActionEvent actionEvent) {
        // Add event code here...
        searchSupplierPopup.hide();
    public void searchSupplier(ActionEvent actionEvent) {
        // Add event code here...
        RichPopup.PopupHints hints = new RichPopup.PopupHints();
        searchSupplierPopup.show(hints);
package com.demo.view;
import java.util.ArrayList;
import java.util.Iterator;
import java.util.List;
import javax.faces.component.UISelectItems;
import javax.faces.event.ActionEvent;
import javax.faces.model.SelectItem;
import oracle.adf.model.BindingContext;
import oracle.adf.model.binding.DCBindingContainer;
import oracle.adf.model.binding.DCIteratorBinding;
import oracle.adf.view.rich.component.rich.RichPopup;
import oracle.adf.view.rich.component.rich.data.RichTable;
import oracle.adf.view.rich.component.rich.input.RichSelectManyListbox;
import oracle.adf.view.rich.context.AdfFacesContext;
import oracle.adf.view.rich.event.DialogEvent;
import oracle.jbo.Key;
import oracle.jbo.Row;
import oracle.jbo.RowSetIterator;
import org.apache.myfaces.trinidad.model.RowKeySet;
public class TestBean {
private RichTable tsupportIssues;
private List<SelectItem> lovValue;
private List<SelectItem> actualList;
private RichSelectManyListbox prp1;
private List valuesChoosed = new ArrayList();
private UISelectItems selectedItems;
private RichPopup searchSupplierPopup;
    public TestBean() {
    super();
public void setTsupportIssues(RichTable tsupportIssues) {
    this.tsupportIssues = tsupportIssues;
public RichTable getTsupportIssues() {
    return tsupportIssues;
public void testMethod(ActionEvent actionEvent) {
    // Add event code here...
    // For learning purposes - show Select Many Button clicked
     System.out.println("Select Many Button has been Clicked");
    // // RowKeySet Object can hold the selected rows from a user as follows
    RowKeySet rksSelectedRows =         this.getTsupportIssues().getSelectedRowKeys();
    // Iterator object provides the ability to use hasNext(), next() and remove() against the selected rows
    Iterator itrSelectedRows = rksSelectedRows.iterator();
    // Get the data control that is bound to the table - e.g.
    // OpenSupportItemsIterator
    DCBindingContainer bindings =         (DCBindingContainer)BindingContext.getCurrent().getCurrentBindingsEntry();
    DCIteratorBinding dcIteratorBindings =         bindings.findIteratorBinding("findAllContactsIterator");
    // Information from binding that is specific to the rows
    RowSetIterator rsiSelectedRows =         dcIteratorBindings.getRowSetIterator();
    // Loop through selected rows
    int i=1;
    while (itrSelectedRows.hasNext()) {
      // Get key for selected row
      Key key = (Key)((List)itrSelectedRows.next()).get(0);
      // Use the key to get the data from the above binding that is related to the row
      Row myRow = rsiSelectedRows.getRow(key);
      // Display attribute of row in console output - would generally be bound to a UI component like a Label and or used to call another proces
      System.out.println(myRow.getAttribute("name"));
      valuesChoosed.add(myRow.getAttribute("name"));
//        actualList = new ArrayList<SelectItem>();
//        String j = Integer.toString(i);
//        actualList.add(new SelectItem(j, (String)myRow.getAttribute("name")));
//      i++;
       searchSupplierPopup.hide();
      AdfFacesContext.getCurrentInstance().addPartialTarget(prp1);
public void setLovValue(List<SelectItem> lovValue) {
    this.lovValue = lovValue;
public List<SelectItem> getLovValue() {
    return lovValue;
public void setActualList(List<SelectItem> actualList) {
    this.actualList = actualList;
public List<SelectItem> getActualList() {
    actualList = new ArrayList<SelectItem>();
    if(valuesChoosed.size()!=0){
    for(int i=0;i<valuesChoosed.size();i++){
      actualList.add(new SelectItem(valuesChoosed.get(i), (String)valuesChoosed.get(i)));
    else{
      actualList.add(new SelectItem("1","Select One"));
    return actualList;
public void setPrp1(RichSelectManyListbox prp1) {
    this.prp1 = prp1;
public RichSelectManyListbox getPrp1() {
    return prp1;
public void setValuesChoosed(List valuesChoosed) {
    this.valuesChoosed = valuesChoosed;
public List getValuesChoosed() {
    return valuesChoosed;
public void getValues(ActionEvent actionEvent) {
    // Add event code here...
    for(int i=0;i<valuesChoosed.size();i++){
      System.out.println(valuesChoosed.get(i));
public void getSelectedValues(ActionEvent actionEvent) {
    // Add event code here...
     for(int i=0;i<this.getLovValue().size();i++){
         System.out.println("Selected Value:"+this.getLovValue().get(i));
public void removeSelectedValues(ActionEvent actionEvent) {
    // Add event code here...
    for(int i=0;i<this.getLovValue().size();i++){
        System.out.println("Selected Value:"+this.getLovValue().get(i));
        System.out.println(this.getLovValue().remove(i));
      AdfFacesContext.getCurrentInstance().addPartialTarget(prp1);
public void setSelectedItems(UISelectItems selectedItems) {
    this.selectedItems = selectedItems;
public UISelectItems getSelectedItems() {
    return selectedItems;
    public void setSearchSupplierPopup(RichPopup searchSupplierPopup) {
        this.searchSupplierPopup = searchSupplierPopup;
    public RichPopup getSearchSupplierPopup() {
        return searchSupplierPopup;
    public void cancelPopupSearch(ActionEvent actionEvent) {
        // Add event code here...
        searchSupplierPopup.hide();
    public void searchSupplier(ActionEvent actionEvent) {
        // Add event code here...
        RichPopup.PopupHints hints = new RichPopup.PopupHints();
        searchSupplierPopup.show(hints);
Thanks,
A. Abhijit

How to get the return values from a web page

Hi all :
how to get the return values from a web page ? I mean how pass values betwen webflow and web page ?
thank you very much
Edited by: jingying Sony on Apr 15, 2010 6:15 AM
Edited by: jingying Sony on Apr 15, 2010 6:18 AM

Hi,
What kind of web page do you have? Do you have possibility to for example make RFCs? Then you could trigger events (with parameters that could "return" the values) and the workflow could react to those events. For example your task can have terminating events.
Regards,
Karri

How to get all the values in one column of a JTable

How to get all the values in one column of a JTable as a Collection of String.
I don;t want to write a for loop to say getValueAt(row, 1) eg for 2nd column.

I don;t want to write a for loop to say getValueAt(row, 1) eg for 2nd column. You could always write a custom TableModel that stores the data in the format you want it. It would probably be about 50 lines of code. Or you could write a loop in 3 lines of code. I'll let you decide which approach you want to take.

How to get all the values of a variable with F4 with checkboxes to select

Dear Experts,
After Executing a query by giving let 3 values(Out of 10 Values) to a variable.
To give 2 more input values to the same variable(i.e.,total I wanted to give 5 inputs this time ),after refreshing the query,for that variable if I click F4, I am seeing the historical values(i.e.,3) and remaining 7 values also But with out any Check Boxes besides them to select the 2 inputs.
In the same F4 Screen, If I click all values(an Icon at The bottom),then also Im seeing but no check Box.
I hve tried by deleting the Delete Personalization also,but no use.
Please tell me How to get all the values with F4 with check boxes to select ,whatever I want??
Thanks in advance

Take a look at the InfoObject and go to the Business Explorer tab. If the 'Query Def. Filter Value Selection' is set to 'Only Values in InfoProvider', you're only going to get the values in F4 that exist in the InfoProvider, not everything in the Master Data. This would need to be changed to the value of 'Values in Master Data Table' if you want it to show everything possible when F4 is chosen.
Likewise, you're going to need to look at the query and go to the Advanced tab for the InfoObject. Make sure that the radio button for 'Values in Master Data Table' is selected. If not, then you should change that selection.

How to get a kerning value in JavaScript

How to get a kerning value(distance between two characters) using javascript?

@Raykor11:
It would be best to move that question to scripting forum for InDesign.
But one solution could be:
1. Read out the property kerningValue from the insertion point between the two characters:
//if two characters are selected:
var _kerningValue = app.selection[0].insertionPoints[1].kerningValue;
2. Measure the exact distance between the characters, so you can decide if you want to increase or decrease the distance
//Two characters are selected:
var _twoCharacters = app.selection[0];
var _charLeft = _twoCharacters.characters[0];
var _charRight = _twoCharacters.characters[1];
var _temp1 = _charLeft.createOutlines(false) //false = does NOT delete original
var _bounds1 = _temp1[0].visibleBounds;
var _temp2 = _charRight.createOutlines(false) //false = does NOT delete original
var _bounds2 = _temp2[0].visibleBounds;
var _distance = _bounds2[1]-_bounds1[3];
_temp1[0].remove();
_temp2[0].remove();
alert("Distance between: "+_distance);
Be aware that there are a lot of other factors that will apply to character distance if you change the kerning value (like tracking, kerning method, composer, desiredGlyphScaling, desiredLetterSpacing, horizontalScale … just to mention a few), especially if the paragraph justification is set to JUSTIFIED or FULLY_JUSTIFIED.
Uwe

How to get the selected value in SelectOneMenu in backing bean

Hello all,
I need your help. I want to have 2 select menus with the second menu's items list are populated based on the selection in the first menu. I don't know how to get the selected value in the backing bean so that I can based on that select menu to populate the second menu's item list. Basically I need to access to the UI Component of the first select Menu and retrieve its selected value.
Could you help me out?
Thank you very much in advance,
Lngo

Hi Lingo,
There r two ways of getting the values into the list. First one is hardcoding the values and the second one is use the list and get the values into the list by firing a query in the database.
Inorder to display the values in the second menu based on the first onces selection we need to add an attribute to the first selectonemenu known as valueChangeListener and we need to sumit the page.
Here is the sample code
<h:selectOneMenu id="catalogue"
                              binding="#{urbean.catalogue}" onchange="submit()"
                              valueChangeListener="#{urbean.categoryValueChange}"
                              <f:selectItem itemLabel="Select Catalogue" itemValue="" />
                              <f:selectItems value="#{urbean.catalogueList}" />
</h:selectOneMenu>
<h:selectOneMenu id="category"
                              binding="#{urbean.category}">     <f:selectItem itemLabel="Select Category" itemValue="" />
                              <f:selectItems value="#{urbean.categoryList}" />
                              <                         </h:selectOneMenu>
now in method called by valuechangelistener we need to write the similar code
public void categoryValueChange(ValueChangeEvent event) {
String rfnum = (String) event.getNewValue();
List categoryList = new ArrayList();
List tempList = new TablenameDAO().getActiveCatByCatalogueID(rfnum);
          for (int i = 0; i < tempList.size(); i++) {
               Tablename tablename = (Tablename ) tempList.get(i);
               String value = "" + tablename .getrfnum();
String label = tablename .getname();
     if (label == null) {
               label = "";
               SelectItem item = new SelectItem(value, label);
               categoryList.add(item);
          bean.setCategoryList(categoryList);
///getActiveCatByCatalogueID (rfnum) should bring the records which r based on the rfnum
if u follow this process i am damsure that u will get the values in to the secondlist based upon the first list
Thanks & Regards
Manidhar

How to get the attribute value of an XML file??

How to get the attribute value of an XML file??
For example, how to get name and age attributes?
<student name="Joe" age="20" />

What are you using to read the XML file??
On the assumption of JDOM - www.jdom.org. Something along the lines of:SAXBuilder builder = new SAXBuilder(true);
Document doc = builder.build(filename);
Element root = doc.getRootElement();
List children = root.getChildren();
Element thisElement = (Element)children.get(n);
String name = thisElement.getAttributeValue("name")
try
int age = Integer.parseInt(thisElement.getAttributeValue("age"));
catch (Exception ex)
throw new InvalidElementException("Expected an int.....");
}Ben

How to get DocSet property values in a SharePoint library into a CSV file using Powershell

Hi,
How to get DocSet property values in a SharePoint library into a CSV file using Powershell?
Any help would be greatly appreciated.
Thank you.
AA.

Hi AOK,
Would you please post your current script and the issue for more effcient support.
In addition, to manage document set in sharepoint please refer to this script to start:
### Load SharePoint SnapIn
2.if ((Get-PSSnapin "Microsoft.SharePoint.PowerShell" -ErrorAction SilentlyContinue) -eq $null)
3.{
4. Add-PSSnapin Microsoft.SharePoint.PowerShell
5.}
6.### Load SharePoint Object Model
7.[System.Reflection.Assembly]::LoadWithPartialName(“Microsoft.SharePoint”)
8.
9.### Get web and list
10.$web = Get-SPWeb http://myweb
11.$list = $web.Lists["List with Document Sets"]
12.
13.### Get Document Set Content Type from list
14.$cType = $list.ContentTypes["Document Set Content Type Name"]
15.
16.### Create Document Set Properties Hashtable
17.[Hashtable]$docsetProperties = @{"DocumentSetDescription"="A Document Set"}
18.$docsetProperties = @{"CustomColumn1"="Value 1"}
19.$docsetProperties = @{"CustomColum2"="Value2"}
20. ### Add all your Columns for your Document Set
21.
22.### Create new Document Set
23.$newDocumentSet = [Microsoft.Office.DocumentManagement.DocumentSets.DocumentSet]::Create($list.RootFolder,"Document Set Title",$cType.Id,$docsetProperties)
24.$web.Dispose()
http://www.letssharepoint.com/2011/06/document-sets-und-powershell.html
If there is anything else regarding this issue, please feel free to post back.
Best Regards,
Anna Wang
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

How to get the selectOneRadio value in javascript

Hi,
I want the selectOneRadio value in javascript. Can anyone give us a solution how to get the selectOneRadio value to javascript from jspx page.
Thanks,
Eswari

Hi,
I assume you are talking about JDeveloper 10.1.3 in where there is no JavaScript API ADF Faces.Here you will have to use document.getElementById() to access the radio button component (which is a list component). You can look at the generated HTML for how the component and its ID look like.
However, what is the usecase that you cannot handle in native JSF ?
Frank

How to get the node value of payload

Hi
The null is returned when I use the following code to get the User_ID element in the payload, but there are values in the User_ID element of the payload
Task task_test = wfSvcClient.getTaskQueryService().getTaskDetailsById(wfCtx, taskId);
System.out.println("the payload value is " + task_test.getPayloadAsElement().getElementsByTagName("User_ID").item(0).getNodeValue());
How to get the node value of payload ? any suggestion?
Thanks
Jayson

Hi Jayson,
Try:
System.out.println("the payload value is " + task_test.getPayloadAsElement().getElementsByTagName("User_ID").item(0).getFirstChild().getNodeValue());
So add the getFirstChild() call in between.
If this works, maybe consider using JAXB to marshall the payload details to POJO's. This will make reading the payload details much easier.
Regards, Ronald

How to get Invoice status value in oracle payable

Hi guys,
I am new in oracle apps plz tell me how to get invoice status value of prepayment invoice type in payable.
Navigation ->Payables->Oracle Payables ->Invoices->Inquiry->Invoices ->go to Invoice status block and open to Status LOV
plz provide me sql query to find those status lov values and accounted values for any supplier & invoice num.
it's urgent plz .......................
Thanks guys.......

The invoice approval status does not come from any table / lookup.
Instead, Oracle builds it by calling the ap_invoices_pkg.get_approval_status function.
You can also call it by passing invoice_id, payment_status_flag and invoice_type_lookup_code.
All these 4 columns are present on the ap_invoices_all record.
Hope this helps
Sandeep Gandhi
Independent Consultant

How to get y axis value(in a numeric control) by providing x-axis value using wave graph

Similar Messages

Maybe you are looking for