How to Get Your Inkjet Printer Working with Windows 8 Consumer Preview

The drivers for your HP Inkjet Printer are already included in the new Windows 8 Consumer Preview!
You do not need to download drivers to use the product. Keep reading to learn how to install the print driver included in Windows 8 Consumer Preview with your HP printer.
Getting started in Windows 8 Consumer Preview
HP designed a quick and easy tool that helps you find the best driver for your printer in Windows 8 Consumer Preview: the HP Printer Install Wizard.
Download Printer Install Wizard for Windows 8 Consumer Preview
NOTE:The HP Printer Install Wizard is not available for all printer. This tool is available only for Windows 8 Consumer Preview. The HP Printer Install Wizard works with products connected with a USB cable or with a wired (Ethernet) or wireless network connection. If you would like to connect your product wirelessly, but it is not yet on a wireless network, you need to temporarily connect the product with a USB cable to run the wizard.
Step one: Download the HP Printer Install Wizard
1.   Click the following link to download the Printer Install Wizard:
HP Diagnostic Utilites
2.   When the tool finishes installing, click Finish. The wizard opens automatically.
Step two: Run the HP Printer Install Wizard
1.   Press the Power button to turn on the printer, if it is not already on.
2.   Connect the USB cable to the HP printer and to the computer, if it is not already connected.
3.   Make sure that your computer has an internet connection. The wizard must access the internet to work correctly.
4.   Click Next to begin the utility. The wizard displays a list of detected printers.
5.   If the wizard detects more than one printer, select your HP printer from the list.
6.   The wizard automatically displays the best available driver for your HP printer.
If a full feature driver is available, the wizard detects it. Click Next to download and install the software. For full functionality, HP recommends installing the full feature driver if it is available.
If an included print driver is available, the wizard explains that the driver is already installed. It will also supply a link to more information about using an included driver.
JonW
I work for HP

This is GREAT! My printer has print drivers available.
If I have helped you solve your issue please mark it as solved .....
(I am an HP employee)

Similar Messages

How To: Get Your Creative Zen Working With Vis

I am an owner of the now outdated Zen 20gb HD0005. Upgraded to Vista Business recently and have not been able to get the player working, the installation cd wouldnt work and neither would the updates at uk.creative.com There is a way! Go to http://us.creative.com/support/downl...ame=Windows+XP (from the US Creative download archi'ves), download the driver to your desktop or where ever. The driver is originally for XP, however, once it is downloaded right click the setup file and select properties. In the new window go to the Compatibility tab and select: Compatible with Windows XP Service Pack 2And, at the bottom, check that the box next to 'Run As An Administrator' is also ticked. Click Apply and then OK and run the setup. It should now (at 67% through the installation) update drivers (this may seem to hang, please be patient!) and then will ask you to reconnect your player. Unplug it, click ok, then plug it in at the end of installation, go to my computer and you should hopefully see that your Zen is under 'Other Devices' I hope this is help to some of you with the same problems as I had!

it seems that it now detects the player but wont run in organiser, only in Explorer. Only thing i can think of is burning songs to disc and then adding them to comp again, unless anyone else has any suggestions?

Compaq Presario R3000 how to get the sound to work with Windows 7 RC

1) Download SP29586.exe: ftp://ftp.hp.com/pub/softpaq/sp29501-30000/sp29586.exe
2) Run it, Create a directory c:\ swsetup
3) Once all the Files are extracted DO NOT INSTALL
4) Now Goto the Start Menu Click on Devices and Printers, the Click on the Name you have called your machine this will be marked will a yellow triangle as the sound driver windows 7 has install already is a realtek ac 97 which is not working,
5) Once your Machinename you will see a general tab and and hardware tab select the hardware tab.
6) Look for the Realtek ac 97 under the Device functions, select that and click properties,
7) Now tab to the Driver, now click update driver,
8) Select the option let me pick from a list of devices drivers, now click have disk
9) Click on Browse select the following location Swsetup\SP29586\SMAXWDM\W2K_XP and click on smwdmCH6.inf
10)Now the Soundmax Driver should come up select ok and next. Now your Sound will work
This question was solved.
View Solution.

I am basicaly having the same problem with my labtop. I tried the following above and yet I still have not been able to get my sound to work. I have had some problems with my power and sound cards before but after I reinstalled windows my graphics card and sound card have not been working to their full potential. I thaught that it was a 64 bit graphics card, but now I am not so sure. I had to jostle the power cord in the back till I mannaged to find a perfect spot to keep the computer running. Before the reinstallation I had to put pressure on the left side of the computer to get the sound to work.. but even then it still came in and out.. "The sound that is." I can see the same driver in the codex menue and it is yellow but, what you stated above did not work.
It says (Cannot continue the hardware update) The wizard cannot find a better match for your hardware than the software that you curently have installed. and then tells me to keep the current software. My sound Icon does not show up when I go to the settings.... I can't play diablo 2 on this no idea why... But my screen is choppy when I scroll through internet sites and it did not do that before. I have a 400mbs connection .... here is my computer information. :Compaq Presario R3000 Intel pent4 2.80ghz 2.80ghz 1.12GB ram and im running on windows xp2 professional.

I would like to buy a HP printer that works with Windows 8 preview.

Understand that HP will not release drivers for existing printers until August at earliest and that is OK....I have 3 HP Laserjet 1020s that have been great and will buy a new HP printer if it will work now with Windows 8 preview. Any suggestions or any fixes/patches for 1020 that work. Also interested in any non-HP printers that work with Windows 8 preview? Prefer HP but will buy first printer that works from any mfg. as I would like to give Windows 8 a real try. Believe HP is missing boat by not putting a patch out for some of their printers as soon as possible as I am not the only HP user looking to buy any printer that works with Windows 8.

JohnW just posted this...should take care of your issue
http://h30434.www3.hp.com/t5/Windows-8-Consumer-Preview/How-to-Get-Your-Inkjet-Printer-Working-with-...

Update to kichat: FAQ 2 - How to get my router to work with iChat?

kichat: FAQ 2 - How to get my router to work with iChat? December 2008 version 3
(Note to Hosts. to be removed on acceptance. Please use this to replace http://discussions.apple.com/thread.jspa?threadID=121775 )
Getting your router started with iChat.
Appropriate for using iChatAV 2 upwards. Edits have been made for iChat 4
Glossary for this FAQ
Routers: Any configurable device that sits between your computer and the internet link you have. This includes Modems that Route as well as "routers"
Routers seem to fall into two categories
Those that work straight from the box. See Apple Article HT1787
NOTE :This Article has not been updated in content since Jan 04 Only being changed to an Article from the Previous Doc listing
Even then some list that they need tweaks.
and those that do not.
This post will deal with what you may need to look at.
First off make sure your device is acting as a DHCP server. (if you are already on the internet you may not have to bother with this.)
Check in the Tiger System Preferences > Network Preference Pane, in the "Built in Ethernet" option from the "Show" drop down list.
In Leopard the Networks are listed on the left with icons. The Airport Option will need you to access the Advance Button for the Next bit.
Make sure the TCP/IP tab is the 'front' one. You should be able to see Configure IPv4 and it most likely reads Using DCHP. Make a note of your IP address. It will start 10.xxx.xxx.xxx or 192.168.xxx.xxx (the 'x' s will stand for any number between 1 and 255). The range 172.16.xxx.xxx is also a possible value at this point. Rarely used, but it is part of the RFC for Address Allocation for Private Internets.
Your router is most likely to be configurable from your browser. You will need to find the IP address to type into the browser from any Readme or PDF files that came on the install disk or visit the makers website and download a manual.
The Port Forward.com site lists many devices and clicking on one will take you to a list of Applications. This iChat will open an page that will start by telling you the defaults to access the device
Opening or Allowing ports. Several Methods not all devices have all of them.
DMZ (Demilitarised Zone)
This is a less secure setting that basically opens all ports and points the incoming data to your computer. (not helpful if you have more than one computer on your LAN). It can be considered as an extreme form of Port Forwarding
Port Forwarding (also Virtual Server or Pin Holes)
These settings are usually found in an Advanced setting.
You may need to set an incoming IP address (Usually 0.0.0.0 to any outside server), a port that data will arrive on, the Inside computer's IP address (your computer) and the port it will deal with the data on and the protocol it will use.
See this pic for an example of the description above.
In this example shows that on some Port AND Protocols need to be listed.
iChat uses TCP and UDP so some devices will need the ports listed one by one and some settings done twice, once for each protocol. The example above has a "Both" setting
See Apple Article HT1507 Previously Doc 93208 for more information. This is the Tiger iChat 3 list. The same ports are needed for Leopard except for these changes
My Note 2:
On the first link Note 1 under tables in that link would be better if it read:
" 1. All iChat AV traffic is UDP -
except for ports 5190 and 5298, which need to be open for both TCP as well;
and 5220, 5222, which need to be open for TCP only. "
Note 2
GoggleTalk needs port 5223 on TCP. Also note the Server name for iChat 3 set ups
UPnP Universal Plug n Play.
This is a simple Plug and Play type of setting. iChat can find it's own way through a router if the device has this capability.
By Not doing Port Forwarding, Triggering or DMZ and enabling UPnP the application is allowed to control the modem and the ports that are open.
They close after the application has finished with them on a timed basis.
On some devices the number of "hops" (how far away the UPnP can be "seen") can be reduced from a default of 4)
Trigger Ports
Some devices offer a security measure that works by a first or trigger port receiving a data packet and then opening further ports when accepted.
The first port for incoming Video or Audio invites is port 5678.
Pre iChat 4
When you click on the invite window the process moves in to port 5060 (so these will need to be opened by the trigger port) for negotiating the final group of ports from the group of 20 (16384-16403 These will need to open when the trigger says so as well). Therefore port 5678 triggers ports 5678, 5060, 16384-16403. All on UDP. Port 5190 neeeds to trigger port 5190 for both TCP and UDP.
See this variation where only the ports listed above are completed.
The other single ports need to be set one by one in addition. (5220,5222, 5223 5297, 5298, 5353)Replace
iChat 4
The port used in IChat 4 is port 16402 instead of port 5060. The group of 20 ports is reduced to 10 (16393-16402). This is because all the In and Out Audio and Video data is on one port. Other that than the settings are the same.
At this time there is no Info on the ports the Screen Sharing in iChat 4 uses.
Wireless
Here you will have to read around but this Apple Article TA25949 Previously Doc 58514 might be a good starting place.
Essentially whether you are wireless or Ethernet to your routing device makes very little difference to the way you do things.
Your computer will get two IPs from a DHCP server if you are connected by both methods. (iChat does not like this)
Multiple devices
Make sure only one is acting as a DHCP server. Make sure wireless devices are bridged properly.
Further Help
I have found that this site (ADSLGuide) to be helpful.
It is British based but I have linked you to the Apple Related Discussions Forum.
Eliminating Problems on my Personal web pages.
The ports and their function within iChat. (my personal Web pages again)
This is not a step by step approach. You will have to read around the information about your device.
Collected FAQs and Expansions: Index Page Based on FAQs here by EZ Jim and myself
Also http://www.portforward.com/routers.htm for instructions with Pics on Port Forwarding and access info as mentioned earlier.
Click on your device.
Select iChat on the next page.
Follow the info on the next.
This site is godd for finding out the Default IP to use in a web browser and the default User ID and Passwords needed to do so.
Gives you a chance to look at at pics to give clues to where some of these other things are.
With thanks to Macmuse for comment on the Original (Aug 23rd 2004)
and to EZ Jim for his work on iSights on my web pages.
I may receive some form of compensation, financial or otherwise, from my recommendation or link.
9:51 PM Saturday; December 6, 2008

kichat: FAQ 2 - How to get my router to work with iChat? December 2008 version 3
(Note to Hosts. to be removed on acceptance. Please use this to replace http://discussions.apple.com/thread.jspa?threadID=121775 )
Getting your router started with iChat.
Appropriate for using iChatAV 2 upwards. Edits have been made for iChat 4
Glossary for this FAQ
Routers: Any configurable device that sits between your computer and the internet link you have. This includes Modems that Route as well as "routers"
Routers seem to fall into two categories
Those that work straight from the box. See Apple Article HT1787
NOTE :This Article has not been updated in content since Jan 04 Only being changed to an Article from the Previous Doc listing
Even then some list that they need tweaks.
and those that do not.
This post will deal with what you may need to look at.
First off make sure your device is acting as a DHCP server. (if you are already on the internet you may not have to bother with this.)
Check in the Tiger System Preferences > Network Preference Pane, in the "Built in Ethernet" option from the "Show" drop down list.
In Leopard the Networks are listed on the left with icons. The Airport Option will need you to access the Advance Button for the Next bit.
Make sure the TCP/IP tab is the 'front' one. You should be able to see Configure IPv4 and it most likely reads Using DCHP. Make a note of your IP address. It will start 10.xxx.xxx.xxx or 192.168.xxx.xxx (the 'x' s will stand for any number between 1 and 255). The range 172.16.xxx.xxx is also a possible value at this point. Rarely used, but it is part of the RFC for Address Allocation for Private Internets.
Your router is most likely to be configurable from your browser. You will need to find the IP address to type into the browser from any Readme or PDF files that came on the install disk or visit the makers website and download a manual.
The Port Forward.com site lists many devices and clicking on one will take you to a list of Applications. This iChat will open an page that will start by telling you the defaults to access the device
Opening or Allowing ports. Several Methods not all devices have all of them.
DMZ (Demilitarised Zone)
This is a less secure setting that basically opens all ports and points the incoming data to your computer. (not helpful if you have more than one computer on your LAN). It can be considered as an extreme form of Port Forwarding
Port Forwarding (also Virtual Server or Pin Holes)
These settings are usually found in an Advanced setting.
You may need to set an incoming IP address (Usually 0.0.0.0 to any outside server), a port that data will arrive on, the Inside computer's IP address (your computer) and the port it will deal with the data on and the protocol it will use.
See this pic for an example of the description above.
In this example shows that on some Port AND Protocols need to be listed.
iChat uses TCP and UDP so some devices will need the ports listed one by one and some settings done twice, once for each protocol. The example above has a "Both" setting
See Apple Article HT1507 Previously Doc 93208 for more information. This is the Tiger iChat 3 list. The same ports are needed for Leopard except for these changes
My Note 2:
On the first link Note 1 under tables in that link would be better if it read:
" 1. All iChat AV traffic is UDP -
except for ports 5190 and 5298, which need to be open for both TCP as well;
and 5220, 5222, which need to be open for TCP only. "
Note 2
GoggleTalk needs port 5223 on TCP. Also note the Server name for iChat 3 set ups
UPnP Universal Plug n Play.
This is a simple Plug and Play type of setting. iChat can find it's own way through a router if the device has this capability.
By Not doing Port Forwarding, Triggering or DMZ and enabling UPnP the application is allowed to control the modem and the ports that are open.
They close after the application has finished with them on a timed basis.
On some devices the number of "hops" (how far away the UPnP can be "seen") can be reduced from a default of 4)
Trigger Ports
Some devices offer a security measure that works by a first or trigger port receiving a data packet and then opening further ports when accepted.
The first port for incoming Video or Audio invites is port 5678.
Pre iChat 4
When you click on the invite window the process moves in to port 5060 (so these will need to be opened by the trigger port) for negotiating the final group of ports from the group of 20 (16384-16403 These will need to open when the trigger says so as well). Therefore port 5678 triggers ports 5678, 5060, 16384-16403. All on UDP. Port 5190 neeeds to trigger port 5190 for both TCP and UDP.
See this variation where only the ports listed above are completed.
The other single ports need to be set one by one in addition. (5220,5222, 5223 5297, 5298, 5353)Replace
iChat 4
The port used in IChat 4 is port 16402 instead of port 5060. The group of 20 ports is reduced to 10 (16393-16402). This is because all the In and Out Audio and Video data is on one port. Other that than the settings are the same.
At this time there is no Info on the ports the Screen Sharing in iChat 4 uses.
Wireless
Here you will have to read around but this Apple Article TA25949 Previously Doc 58514 might be a good starting place.
Essentially whether you are wireless or Ethernet to your routing device makes very little difference to the way you do things.
Your computer will get two IPs from a DHCP server if you are connected by both methods. (iChat does not like this)
Multiple devices
Make sure only one is acting as a DHCP server. Make sure wireless devices are bridged properly.
Further Help
I have found that this site (ADSLGuide) to be helpful.
It is British based but I have linked you to the Apple Related Discussions Forum.
Eliminating Problems on my Personal web pages.
The ports and their function within iChat. (my personal Web pages again)
This is not a step by step approach. You will have to read around the information about your device.
Collected FAQs and Expansions: Index Page Based on FAQs here by EZ Jim and myself
Also http://www.portforward.com/routers.htm for instructions with Pics on Port Forwarding and access info as mentioned earlier.
Click on your device.
Select iChat on the next page.
Follow the info on the next.
This site is godd for finding out the Default IP to use in a web browser and the default User ID and Passwords needed to do so.
Gives you a chance to look at at pics to give clues to where some of these other things are.
With thanks to Macmuse for comment on the Original (Aug 23rd 2004)
and to EZ Jim for his work on iSights on my web pages.
I may receive some form of compensation, financial or otherwise, from my recommendation or link.
9:51 PM Saturday; December 6, 2008

How to get my Addon to work with the license key?

Hi,
Can someone tell me how to get the Addon to work with the license key?
I've follow the steps as stated in this thread:
[Re: SBO 2005 A - How do I get a Connection string from SAP B1.|Re: SBO 2005 A - How do I get a Connection string from SAP B1.]
1) i've registered a BASIS key and get a 'BASISXXXXXX" string
2) then i paste my BASIS key in "Solution" of Add-On Indentifier Generator and generate the Add-On Indentifier Code
3) then i paste the string to my source code
which is the "XXX" of the sample code in that thread.
static string AddonIdentifierString="XXX";
int lRetCode=0;
int errCode=0;
string errMsg= string.Empty;
string connectionStr ="";
link = new SAPbouiCOM.SboGuiApiClass();
connectionStr =Environment.GetCommandLineArgs().GetValue(1).ToString();
link.AddonIdentifier=AddonIdentifierString;
link.Connect(connectionStr);
oApp = link.GetApplication(-1);
vCompany = new SAPbobsCOM.CompanyClass();
string cookie = vCompany.GetContextCookie();
string conStr = oApp.Company.GetConnectionContext(cookie);
vCompany.SetSboLoginContext(conStr);
lRetCode = vCompany.Connect();
4) then i add my add-on using manager role at Add-on admin
5) then i can see my add-on there. it not suppose to be there since i've not installed any of my add-on license for my own add-on.
what steps did i miss? Can someone please advise? Thanks
ps : i'm coding in VB

Hi,
i think you have to change the license file attributing the number of licensing for your addon, then download it from https://websmp202.sap-ag.de/smb and then install it on SAP License manager, then I think you should give the license for your addon for individual users (example manager)
I hope it helps.
Best regards

How to get online apps to work with the Verizon DSL modem firewall set at "Medium" level, not "Low?"

How to get online apps to work with the Verizon DSL modem firewall set at “Medium” level? Xbox 360 Live, FTP, and the Windows sntp Time checker native to Windows XP WON’T WORK unless the Verizon firewall is first reset down to “Low.” Then all works well, but I then risk low firewall protection. Setup: · Westell 6100 DSL modem (Software Version: VER:4.04.03.00 Transceiver Revision: 7.2.3.0 Model Name: C90-610015-06), · D-Link DIR-655 wireless router (Hardware Version: A3, Firmware Version: 1.21), For Xbox 360 Live the “canned” port forwarding rule for provided in Verizon’s drop-down list for the Westell 6100 modem forwards ports 88 and 3074 for both TCP and UDP. This does not meet Microsoft’s forwarding recommendations for Xbox 360 Live stated at http://support.microsoft.com/kb/908874. Instead, for the Verizon modem (Westell) I made a new port forwarding rule to comply with those Microsoft instructions. It forwards ports 53, 80 and 3074 for TCP and ports 53, 88 and 3074 for UDP. These same ports are also forwarded in the D-Link router configuration. For FTP, port 21 is also forwarded for TCP and UDP in both modem and router. But they don’t work until I first cripple the Verizon firewall down to “Low.” How to get them to work with the Verizon firewall up to Medium?

While I do not know the answer to your question, BUT since you have this modem and another router - you could just follow.
http://www.dslreports.com/faq/13600
^^
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

How can I get photoshop CS2 to work with Windows 8.1?

how can I get photoshop CS2 to work with Windows 8.1?

Have a look at
http://forums.adobe.com/message/4976720
Cheers
John

How to get this script to work with different browser

Do you guys know how to get this script to work with mozilla firefox?
do shell script "open -a safari 'https://login.binck.nl/klanten/Login.aspx?ReturnUrl=%2fklanten%2fdefault.aspx'"
tell application "Safari"
activate
          tell document 1
                    repeat until ((do JavaScript "location.host") is "login.binck.nl")
                              delay 1
                    end repeat
do JavaScript"document.getElementById('ctl00_Content_Gebruikersnaam').value='sim';document.ge tElementById('ctl00_Content_Wachtwoord').value='password';window.open(document. g etElementById('ctl00_Content_LoginButton').href, '_self', 'true');"
          end tell
end tell
Thank you so much in advance:)

That isn't possible. Firefox's AppleScript dictionary doesn't contain anything which can be used to manage JavaScripts.
(63741)

Can't get Palm Zire to work with windows 7

Can't get palm zire to work with windows
Post relates to: Palm Pilot

Please review the "stickied" threads near the top of this board, about syncing with Windows 7 and Vista. It's all there.
After you've been through and tried everything there is to try, and still have problems, please post back with specific info about exactly what you've tried, what version of Windows 7 you have (32-bit or 64-bit), etc.
smkranz
I am a volunteer, and not an HP employee.
Palm OS ∙ webOS ∙ Android

Can the wireless printer work with window 7?

can the wireless printer work with window 7?

Will this wireless printer connect to the AirPort Express Base Station (AX) via a wireless or USB connection?

How to get exact match when working with Oracle Text?

Hi,
I'm running Oracle9i Database R2.
I would like to know how do I get exact match when working with Oracle Text.
DROP TABLE T_TEST_1;
CREATE TABLE T_TEST_1 (text VARCHAR2(30));
INSERT INTO T_TEST_1 VALUES('Management');
INSERT INTO T_TEST_1 VALUES('Busines Management Practice');
INSERT INTO T_TEST_1 VALUES('Human Resource Management');
COMMIT;
DROP INDEX T_TEST_1;
CREATE INDEX T_TEST_1_IDX ON T_TEST_1(text) INDEXTYPE IS CTXSYS.CONTEXT;
SELECT * FROM T_TEST_1 WHERE CONTAINS(text, 'Management')>0;
The above query will return 3 rows. How do I make Oracle Text to return me only the first row - which is exact match because sometimes my users need to look for exact match term.
Please advise.
Regards,
Jap.

But I would like to utilize the Oracle Text index. Don't know your db version, but if you slightly redefine your index you can achieve this (at least on my 11g instance) :
SQL> create table t_test_1 (text varchar2(30))
2 /
Table created.
SQL> insert into t_test_1 values ('Management')
2 /
1 row created.
SQL> insert into t_test_1 values ('Busines Management Practice')
2 /
1 row created.
SQL> insert into t_test_1 values ('Human Resource Management')
2 /
1 row created.
SQL>
SQL> create index t_test_1_idx on t_test_1(text) indextype is ctxsys.context filter by text
2 /
Index created.
SQL> set autotrace on explain
SQL>
SQL> select text, score (1)
2    from t_test_1
3   where contains (text, 'Management and sdata(text="Management")', 1) > 0
4 /
TEXT                             SCORE(1)
Management                              3
Execution Plan
Plan hash value: 4163886076
| Id | Operation                   | Name         | Rows | Bytes | Cost (%CPU)| Time     |
|   0 | SELECT STATEMENT            |              |     1 |    29 |     4   (0)| 00:00:01 |
|   1 | TABLE ACCESS BY INDEX ROWID| T_TEST_1     |     1 |    29 |     4   (0)| 00:00:01 |
|* 2 |   DOMAIN INDEX              | T_TEST_1_IDX |       |       |     4   (0)| 00:00:01 |
Predicate Information (identified by operation id):
   2 - access("CTXSYS"."CONTAINS"("TEXT",'Management and
              sdata(text="Management")',1)>0)
Note
   - dynamic sampling used for this statementJust read that you indeed mentioned your db version in your first post.
Not sure though if above method is already available in 9i ...
Message was edited by:
michaels

Does hp 3056A printer work with windows 8

does an hp 3056A all-in-one printer work with a windows 8 computer

Hi,
Yes, you can use driver from the following link:
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4132&lc=en&cc=us&dlc=en&sw_lang=&product=5298...
My suggestion: download the second utility and run it, it will find and install driver for your computer.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

How to get Zen Touch to work on Windows Vista without PFS (worked!)

CHow to get Zen Touch to work on Windows Vista without PFS (worked!)? ***THIS WORKED***
For all of you that want to get their music out of the Zen touch, and are stuck with Vista and .0.03 firmware (non vista recognisable), and don't want to erase everything by installing the latest firmware, here is what worked for me:
)Uninstall every piece of Touch software you got and reboot.
2) Download the latest drivers from Creative: JB3MV2...exe, together with the latest Nomad explorer, and the latest Notmad explorer from Red Chair (a trial is enough, version 9.0.3 currently).
3) Right click the driver, properties, go to compatibility mode, and select Windows XP SP2. Make sure your Zen is unplugged (worked for me that way). Right click the driver installer again and Run as Administrator. It hanged around 72% for me, no biggy, open your task manager and shut the installer off.
4)Before rebooting, install Notmad explorer.(I installed only the Zen touch part of it. I tried to run it right away but got a 'cannot find explorer.exe error - again, no biggy).
5) Reboot, plug in your Zen. Again for me, Notmad didn't work. This is what worked: Without messing up anything, install Nomad Explorer by Creative on top of it all, and reboot again.
6) After reboot, with your Zen still plugged in, right click the little Notmad icon on the right part of the taskbar and select 'Connect Jukebox Zen'. And voila, check your explorer, it should hopefully recognise the Zen Touch like windows xp would.
If you still run into trouble, just install stuff from the beggining, making sure Compatibility: WinXP SP2 and Run as Admin are used everywhere, and keep rebooting till it hopefully works.
Best of luck. edit: Using Winamp to transfer files worked as well.

Hi D2xS-Shooter,
I am afraid Creative Cloud desktop app is not compatible with Windows Vista. If you run into problems there are very limited resources from Adobe to assist.
Creative Cloud is a collection of apps with various different tech specs
http://www.adobe.com/uk/products/creativecloud/tech-specs.html
Thanks!
Eshant

Getting existing wireless solution working with Windows 7 client

A bit new to this so need some help
I have been asked to do some innovation around an existing operational wireless solution.
Setup is;
1. Wireless client - running Juniper Odyssey client. This authenticates user on logon to Windows using username / SecurID token / pin. Configuration via WAP / TKIP
2. Cisco Aironet Wireless Access Point
3. Cisco 4402 Wireless LAN controller
4. Cisco ACS v4.1 - configured as RADIUS server with connection to external RSA Authentication Manager 6.1
As part of a transformation programme I have been asked to investigate whether this existing wireless infrsatructure will work with Windows 7 as the client operating system. Also to look whether the wireless functions in Windows 7 will allow the Odyssey client to be removed.
I am unsure what client if any I need to install on the Windows 7 client in order to try and get this working. Do I need the VPN client from Cisco, the RSA EAP client or will Win 7 allow me to do this.
Any help appreciated.

I am still struggling with this concept of suplicants
I have tried to set this up with the wireless capabilities in Windows 7 to no avail. I see that Windows 7 only supports certin EAP types - how can I find out what my EAP type is on the ACS server?

How to Get Your Inkjet Printer Working with Windows 8 Consumer Preview

Similar Messages

Maybe you are looking for