How to give a device a 2,4ghz wireless

I bought a withing smart baby monitor, and seem not to be operating in a 5 ghz wireless connection

You cannot change bands on devices like baby monitor. Check the manual for change of channels.. but it may not be possible.

Similar Messages

How to give Device-dependent command in Labview

I am using a Keithley Programmable Current Source (Model 224). When I try to read It gives a string(containing current, V-limit, dwell time).
NDCI +n.nnnnE+n, V+n.nn00E+n, W+n.nnnnE+n
According to the manual a device-dependent command like D0X will display Source, D1X will display Voltage limit and D2X will dispaly Dwell Time. I would like know how give these device-dependent commands.
Why cann't i get the proper result using the attached vi.
Attachments:
GPIB.vi ‏22 KB

I am including the SUB VI's here. The basic problem is to get the display of Source current reading only, with D0X command instade of all three parameters (Source current , V-limit, dwell time).
Mode 0 or Mode 2 is not giving any desired result.
Yes, in the sub Vi's GPIB address is constant. I have the driver for 2182 but it is not a problem, at least now.
Attachments:
ReadCurrent.vi ‏17 KB
Voltage_limit.vi ‏17 KB

How to give permission to Menu Item in PeopleSoft HR 7.5

Hello All,
I am new to PS 7.5. I like to find how to give permission to MenuItem in PS 7.5. I am able to go there via
PeopleTools -> Security Administrator -> MenuItems -> double click on the Administer Workforce -> I will see my menuitem there. I highlited my menuitem. still I coulcnt see that menuitem online. Please let me know how to give menuitem access in PeopleSoft 7.5.
Thanks.

I would check to see if there is software that can be downloaded to the PC from the manufacturer. I am assuming your device is a "plug and play" device. The manufacturer might still have the device drivers for install on their website.
Installing the drivers manually should alleviate the problem
Otherwise, you can make the changes in Group Policy to solve the problem
See this link: http://technet.microsoft.com/en-us/library/cc725772.aspx

How Do I Manage Device Prioritization on FIOS-BP20P Router?

I am trying to give my devices top bandwidth priority. I’ve read how to do this in several posts, but my router does not appear to support Qos setting. I just fond out about this capabilty and it seems there's no way to utilize it. The directions in the manual aren’t very detailed and don’t appear to match my router. I’m using FIOS Quantum Gateway Model FIOS-BP20P. I use my internet for work. If I can’t keep top priority in bandwidth I’ll have to kick everybody (two other people) off of my Wi-Fi. I’m not looking forward to the dirty looks.
The following is a link to a screen capture of the advanced admin page:
https://docs.google.com/file/d/0By14b0D-Zkq1QVNidnhEc0QwVWs/edit

see: http://support.apple.com/kb/ht4847

Compiling Media gives a Device ERROR at 99% in PE 11

I have a 3 hr on my time line and am trying to burn a Blue Ray. It is compiling and at 99% it gives a Device ERROR. The original video was shot on a Canon DSLR camera. My burner is a LG and is external USB 3.0. My OS is Win7 64 Bit and have nVidia card and Intel i7 procesor with 32 GB ram in an ASUS motherboard. I have all the latest drivers for my hardware. The BlueRay disk is 25 GB - Memorex brand. I tried to switch to RiData and same issue. Can you please Help. Thanks in advance.

Below is a copy of a message I sent to Adobe
I am using windows 7 64 bit professional. Lenovo T530 with 8 processors. 115 GB free on Hard drive
My pre11 program will not burn an avchd project to a folder. I have been working with this for 6 days now and I can’t get it to work. I have a project that has 38 m2ts clips from my camera which is about 15 minutes. The clips total about 2.6 GB
I can put all 38 clips into my project and if I don’t do anything to them I can burn the project to avdhd to a 4.7GB folder with no problem. The resulting stream files amount to about 2 GB
I can then add a fade in to the first clip and a fade out to the last clip and then a default cross dissolve transition between each clip in the timeline. Then I can successfully burn that to a 4.7 GB folder.
Then I can make three cuts (one simply deleting one clip and another 2 cutting out parts of two clips). Then I can successfully burn that project.
Then I make about 10 more cuts. When I try to burn this if first goes through the “encoding media” stage and then the “compiling media” stage and then as soon as it starts burning, I get the message “device error and the computer locks up.
I need to know how to fix this.
I checked the timeline and there are no gaps and there is no menu.
Cliff

How do you remove devices from the device list when setting up 2-step verification for your apple id?

When setting up 2-step verification for my Apple ID, I get a list of devices to verify. My list has my old iPhone 4 and my old iPad, which I don't have either of anymore. Is there a way to remove these devices from the list? Plus, both iPads that are listed don't give any indication of which one is my current iPad and which is my old iPad, so I'm not sure which one to verify. What should I do there.

For reference, I figured out how to identify which iPad was which so I could verify my iPad. I went into the settings on my new iPad and changed the device name, started a iCloud backup (not sure if this was necessary but I wanted to make sure the device name change persited to the cloud) and then was able to see the new name on the device screen for 2-step verification. Hopefully this helps someone if they have a similar problem. I still am not sure how to remove old devices from the list.

How to get the device token in windows phone 8 sliverlight application?

Hi,
I am developing a windows phone 8 silverlight application . For my application I want to add push notification service , for this service I have to call one web service in my app . This api requires device token , device id ..etc , I am able to get the all
the things except devicetoken .
How to get the device token of a device ?
any help?
Thanks...
Suresh.M

Most probably device token is the push channel url which is returned by MPNS when a request is made to it.
Step 3 here: Push notifications for Windows Phone 8
http://developer.nokia.com/community/wiki/Using_Crypto%2B%2B_library_with_Windows_Phone_8

How to give Authorization?

I have created a 'Z' application which consists of create, change and display User interface.Whenever the user selects craete all fields go editable, change will have some fields editable and display all uneditable.I used only one view and i handled all three modes using invisible and enable property.
Now i want to allow only certain users to access create and change but display for all users.How to give this kind of autorization in webdynpro????
Please explain me about authorization in webdynpro taking my scenario?

Hello,
I hope you are aware of authority checks in ABAP in general. In your scenario, what you can do is: create one context attribute IS_AUTHORIZED of type WDY_BOOLEAN.
And in WDDOINIT of the component controller or view controller,
do the authorization check using AUTHORITY-CHECK stmt and if the check fails i.e. sy-subrc is not equals to 0, then
set the attribute IS_AUTHORIZED to false. Otherwise set it to true.
And you have to bind the enabled property of the buttons to this context attribute IS_AUTHORIZED.
Please refer to the following code sample:
    DATA lo_nd_selection_type TYPE REF TO if_wd_context_node.
    DATA lo_el_selection_type TYPE REF TO if_wd_context_element.
    lo_nd_selection_type = wd_context->get_child_node( name = wd_this->wdctx_flex_config ).
    lo_el_selection_type = lo_nd_selection_type->get_element( ).
AUTHORITY-CHECK OBJECT <objectName>
ID <name1> FIELD <f1>
ID <name2> FIELD <f2>.
IF sy-subrc <> 0.
* Prohibhit the user from modifying config
    lo_el_selection_type->set_attribute(
      name = `IS_AUTHORIZED`
      value = abap_false ).
ELSE.
    lo_el_selection_type->set_attribute(
      name = `IS_AUTHORIZED`
      value = abap_true ).
ENDIF.
Hope this helps!
Regards,
Srilatha

How to give backgound color

H All :
I am using collection in my application for textbox
HTMLDB_ITEM.TEXT(2,null,30,500,''style="background-color: RED"'')
i am using this which give me the red in color background effect
i am using
HTMLDB_ITEM.DISPLAY_AND_SAVE(2,null,30,500)
how to give a background or a fore ground color this item
please suggest
Thanks
Sudhir

It's actually quite easy.
What you have to do is write a custom tree cell renderer which extends DefaultTreeCellRenderer. In that class, your getTreeCellRenderer() method should do something like the following:
public Component getTreeCellRendererComponent(
    JTree tree, Object value, boolean selected,
    boolean expanded, boolean leaf, int row, boolean hasFocus )
        Component treeCellRenderer =
              super.getTreeCellRendererComponent(tree, value, selected, expanded, leaf, row, hasFocus);
        if (selected) {
            setForeground(Color.WHITE);
            setBackground(BACKGROUND_SELECTION_COLOR);
        } else {
            treeCellRenderer.setForeground(Color.RED);
        return treeCellRenderer;
Then you'll need to make sure that you call myTree.setCellRenderer(new CustomTreeCellRenderer());
cheers,
Greg

How to give the no of lines per a page in alv report

hi
could u plz inform me
how to give the no of lines per page in alv report
in ordinary report we can give line-count na
how can we give in alvs.
thanx
kals.

Hi Kalyan,
There is another Forum(Abap Development) where u can post abap related stuffs and u can also get quick answers there..
Cheers...
Santosh

How to give no of lines per page in alv report

hi
could anybody tell me
how to give no of lines per page in alv report
i need bottom of page too
if possible plz send the code too
it ll be very helpful to me
thanx
kals.

Hi,
This is possible, using some of the events in the ALV.
You could use AFTER_LINE_OUTPUT event and call you form after say, a certain line count is reached on the list output.
MOVE 'AFTER_LINE_OUTPUT' TO gw_event-name.
MOVE 'AFTER_LINE_OUTPUT' TO gw_event-form.
APPEND gw_event TO gt_events.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
       EXPORTING
            it_events                = gt_events[]
and define the form for each event as follows - this would be a dynamic call by the ALV.
*&      Form after_line_output
*       Form for the After Line Output Event in the internal table
*      --> rs_lineinfo
FORM after_line_output USING rs_lineinfo TYPE slis_lineinfo.
IF sy-linno eq v_linno.          "Defaulted value for line count
    perform write_footer.
    NEW-PAGE.
ENDIF.
ENDFORM.                    " after_line_output
For lines per page:
rs_lineinfo-tabindex would give you the index of the current line in the list, which you could use to read the t_outtab table, and reduce the line count of items displayed on the earlier page.
There are a few other events too, like BEFORE_LINE_OUTPUT and END_OF_LIST which you can use as required and print the data.
Regards,
Anil.

HT204053 i need to know how to separate different devices on the same itunes account

I need to kow how to seperate different devices on the same itunes account

Each of you should have their own iCloud account which could be set up in "Settings > iCloud" (and if you asking me also for iMessage and FaceTime), but you could still use the same Apple ID for iTunes and App Store purchases which could be set up in "Settings > iTunes & App Stores" so that you only have to purchase each app or other media once.

How do i disassociate devices from my itunes account? I have an old iphone 4, PC, and soon to be old iphone 5.

How do i disassociate devices from my itunes account? I have an old iphone 4, PC, and soon to be old iphone 5.

Hey sgallagher5200,
Thanks for the question. The following resource outlines how to remove an associated device from your account:
iTunes Store: Associating a device or computer to your Apple ID
http://support.apple.com/kb/HT4627
Removing an associated device or computer from an Apple ID
To remove a device or computer from your Apple ID:
Open iTunes.
Sign in to your Apple ID by choosing Store > Sign In from the iTunes menu.
Choose Store > View My Account from the iTunes menu.
From the Account Information screen, click Manage Devices.
Click the Remove button next to the device name you would like to unassociate.
Note: Removing a device from your Apple ID does not override the 90-day timer. You must wait 90 days from the day the device was first associated with your Apple ID before it can be associated with another Apple ID.
Thanks,
Matt M.

How can I delete devices from icloud account?

How can I delete devices from icloud account?

Welcome to the Apple community.
Simply turn off "find my phone" and delete the iCloud account from your device.

How to sync two devices with single Apple ID?

I would like to use the same Apple ID for both devices. During syncing in computer ITunes, is it possible to avoid the applications in both devices share to each others?

What syncs to any given device from a single iTunes library depend on how you have that device's profile set up in iTunes. When you connect the device to iTunes and select it under Devices, you will see a screen to the right. That screen has several tabs, including a tab for Apps. You select which apps you want on a particular device there.
Be sure you do not have "Automatice Downloads" set up under Settings>iTunes & App Stores for the devices in question.
Cheers,
GB

How to give a device a 2,4ghz wireless

Similar Messages

Maybe you are looking for