How to give discount only to 1st 50 customers

please allotment marks if you feel this question help full

One needs to create sales deals as master data[VB22] in the system,
For this you first have to define the agreement types you want to use. Types of sales deals are defined exactly as rebate agreement types in Customizing for Sales and Distribution.
Regards,
Gauravjit.
Reward points if the solution is helpful

Similar Messages

How to set discount for first few customers???

If a company plans to offer a new scheme in which first 100 customers will get 20 % discount and after that normal rates from 101st customer onwards. How to do the settings for the same.

Hi,
No automatic solution
For this you can mange with PROCESSING status of condition record at initial stage it is released status once discount consumed by 100 customer then set status as block in condition record(before 101 customer can order)
VK11/VK12
Menu EXTRA >> key enter processing status
Some time release status or processing status column not appear in condition record the reason is the table used in access sequence no flagged for WITH RELEASE STATUS when creating table,so create new table tickmark to with release status and assign same in access sequence of your discount condition
Kapil

Restrict discount only for 10 orders

Hi
i want to restrict discount for only 10 customer for that i did some seeting in v/06 condition type and activated the condition update but when am creating condition record and in additional data there is option called Max no of orders when am entering 10 its throwing error enter a valid value. so kindly help me.
thanx

Hi there,
If the requirement is to give discount only to 10 specific customers, then check the key combination of the condition record.
If the condition type has a key combination of sold-to / ship-to partners, then maintain the condition type only for those customers to whom you want to give the discount.
If your requirement is to give discount to any first 10 customers, then logic is different. In that case you can define the condition type as manual. Since it is only for 1st 10 customers, then the order entry person will manually give the discount only to first 10 customers.
If you dont want manual intervention, then you can do this. Check for what sales area / order type you want to give this discount. Then in the requirement routine of that condition type write a customized code. In the code put a logic such that the system takes a count of VBAK entries in that salea area for that order type. If the count of VBAK <= 10, only then the condition type will apply.
Hope thsi works.
Regards,
Sivanand

Give Discount/Surcharges to PR00

Hi Experts,
Please can you explain how to give discount to PR00 base value?
For example, currently the pricing logic is PR00 value * quantity = gross value. Any discount or surcharges will be based on this gross value.
How to change it to give discount/surcharges directly to PR00?
Thank you very much.
Regards, Elaine

Thank you...
But I did not make my requirement clearly.
Current logic is -
PR00 = 3.175
Quantity = 1200
Discount = 6%
So the total = 3.17512000.94 = 3581.4
Is there any method that we can change it to this way
PR00 = 3.175
Discount = 6%
So the unit price now is 2.985
total = 2.985*1200 = 3582
Thank you!

How to give browse and monitor only options of an ICM script to a certain group?

I am looking for an option in the Feature Control Set, how to give "Browse and Monitor" only options for a certain group in our contact centre. If someone give me some clue, it would be appreciatable.

Hello Praveen,
This work at some point. But it's not resolving what I intend to do. When I give "Read Only" previledge, to the certain group, it won't be able to do other tasks what they do day to day. I am looking specifically to give read only previledge in the scripting level. Not at the configuration level.
Thanks.

I am trying to purchase Creative Suite CS6 Design Standard. I own a Max OSX. I live in Germany. When I try to order for Germany, it gives me only an option for Windows, not Mac. How can I order?

I am trying to purchase Creative Suite CS6 Design Standard. I own a Max OSX. I live in Germany. When I try to order for Germany, it gives me only an option for Windows, not Mac. How can I order?

In Germany no telephone number nor web chat is available. Searching on the Adobe site tells me that this forum is the only avialable means to ask consumer questions. I am giving up and ordering from elsewhere.

How can give only select privilge to user

hi all
how can give only select privilge to user
"connect" have many sytem privilge such as
alter session,
create cluster,
create database link,
create sequence,
create session,
create synonyms
create table,
create view,
"resource" have many sytem privilge such as
create cluster,
create indextype,
create operator,
create procedure,
create sequence,
create table,
create trigger,
create type
i want give only select privige to user

afzal wrote:
hi all
how can give only select privilge to user
"connect" have many sytem privilge such as
alter session,
create cluster,
create database link,
create sequence,
create session,
create synonyms
create table,
create view,
"resource" have many sytem privilge such as
create cluster,
create indextype,
create operator,
create procedure,
create sequence,
create table,
create trigger,
create type
i want give only select privige to userFirst of all, SELECT privilege is OBJECT type of privilege. It is not a SYSTEM privilege.
Some of the examples for granting this priv I have mentioned below:
Examples
Suppose you own emp table. Now you want to grant select privilege on this table to other user “SAMI”.
grant select on emp to sami;Suppose you want to grant select privilege on emp to all other users of the database. Then
grant select on emp to public;

Im only starting and cant work out how to give a black and white photo blue eyes

im a beginer and cant figer out how to give a black and white portrat photo blue eyes

- If the original is B&W first change the picture's mode to color. In my PSE version with is done by Image > Mode > RGB Color.
- Add a blank layer and set it's Blend Mode to Overlay or Color.
- Activate the Brush tool, choose a dark blue color, and paint the eyes. If the result is too dark lower the layer's Opacity. Use the Eraser to remove excess color around the eyes.

How to handle discounts to be given to main company?

I am delivering goods and invoice to comany X,Y and Z which are subsidiaries of Company -A. But I want to give a consolidated discount only to comapny A (for the sales made to X,Y,Z). How do I handle this in SD module?

The standard SAP process says that you can give the same status to other Customers through Customer Hrchy, what you are giving to the Top Customer in the Customer Hrchy, but just what others are mentioning that, discount can be constrained to the parent company through this (I am not knowing the full functionality that how this will be done) if you go by my view there can be a alternate to this for what you want to do, you can link the sold to party of other customers in the partner function view of Main Customer Master & from there you can set the discount for the Main Company. i think that will be much easier to do then going for customer Hrchy.
Reward Points if it helps
Regards,
N

How to give Authorization?

I have created a 'Z' application which consists of create, change and display User interface.Whenever the user selects craete all fields go editable, change will have some fields editable and display all uneditable.I used only one view and i handled all three modes using invisible and enable property.
Now i want to allow only certain users to access create and change but display for all users.How to give this kind of autorization in webdynpro????
Please explain me about authorization in webdynpro taking my scenario?

Hello,
I hope you are aware of authority checks in ABAP in general. In your scenario, what you can do is: create one context attribute IS_AUTHORIZED of type WDY_BOOLEAN.
And in WDDOINIT of the component controller or view controller,
do the authorization check using AUTHORITY-CHECK stmt and if the check fails i.e. sy-subrc is not equals to 0, then
set the attribute IS_AUTHORIZED to false. Otherwise set it to true.
And you have to bind the enabled property of the buttons to this context attribute IS_AUTHORIZED.
Please refer to the following code sample:
    DATA lo_nd_selection_type TYPE REF TO if_wd_context_node.
    DATA lo_el_selection_type TYPE REF TO if_wd_context_element.
    lo_nd_selection_type = wd_context->get_child_node( name = wd_this->wdctx_flex_config ).
    lo_el_selection_type = lo_nd_selection_type->get_element( ).
AUTHORITY-CHECK OBJECT <objectName>
ID <name1> FIELD <f1>
ID <name2> FIELD <f2>.
IF sy-subrc <> 0.
* Prohibhit the user from modifying config
    lo_el_selection_type->set_attribute(
      name = `IS_AUTHORIZED`
      value = abap_false ).
ELSE.
    lo_el_selection_type->set_attribute(
      name = `IS_AUTHORIZED`
      value = abap_true ).
ENDIF.
Hope this helps!
Regards,
Srilatha

I changed my apple id user name on my iphone, but when i want to sign to icloud on my ipod it gives me only the old id user name

i changed my apple id user name for icloud on my iphone, but when i want to sign in to icloud on my ipod it gives me only the old id user name, and of course its deleted and when i put the old password for my old id it doesnt accept it, so please help me in how my ipod get the info that i changed my apple id, and also when i try to sign off icloud it again gives me back the old apple id and ask me for a password to turn off my find my iphone, im really confused and i tried everything.....
My ipad was changed normally and easily but my ipod is stuck and of course is not listed on my devices on icloud....please help me!!!!!!!!!!!!!

Hello oshalaby,
To get it to your new Apple ID, you would need to change it back to your old on so you can turn off Find My Device and turn it off. Once that is done, change it back to what you are currently using now. Take a look at the article below for more information.
If you're asked for the password to your previous Apple ID when signing out of iCloud
http://support.apple.com/en-us/TS5223
Change your Apple ID temporarily
If signing out and back in to iMessage or FaceTime didn't help, try these steps:
Change your Apple ID to the Apple ID you used previously. You shouldn't need to verify the email address.
Tap Settings > iCloud. Complete these steps only if the Find My [Device] setting is turned on:
Scroll down and tap Sign Out, then tap Sign Out to confirm. If you're using iOS 7 or earlier, tap Delete Account, then tap Delete to confirm.
Tap Keep on My [Device] or Delete from My [Device]. In either case, your data remains in iCloud and will be updated on your device when you sign in to iCloud again.
Enter the password for your previous Apple ID.
Change your Apple ID to the new email address that you want to use. You'll need to verify the email address.
Return to Settings > iCloud and sign in with your new Apple ID.
Regards,
-Norm G.

How to give constant space in sap scripts.

Dear experts,
In my requirement I am printing invoice line item details. In my program,I am printing 8 columns. How to give the constant space in my output.
My issue.: here am fetching Internal Excise Document Number (DOCNO) item number (zeile) plant (werks) quantity (menge) storage location (lgort) and so on.
when i am fetching the values from the table, the values are different from each and every rows. so nothing would be aligned properly into the column. For example, if the doc no is having 10 char,from item no all the values of the column is getting moved to right side. in my second row doc no is having only 2 chars. in this case every column value is moving left side. its looking like realigned and not good.
How do i give constant space for each and every column. so if the values are more or less it could not be moved to any side.
please hellp me to solve this issue.
<MOVED BY MODERATOR TO THE CORRECT FORUM>
Thanks in advance.
Regards,
Sandy.
Edited by: Alvaro Tejada Galindo on Sep 28, 2011 3:40 PM

Hi,
check out ur tab positioning in paragraph format...any misalignment is their or not.
second thing you can do is checkout your printer i.e zebra printer or .matrix etc. your using sometimes misalignment happens
in printer..or print some sample values for verifying the root cause .
regards,
KRISHNA

How to assign select only privilage to a user application wise..?

1-i have a function checking for a user_id and password it works fine.
2-i have a procedure checking for the user privilage
Both 1 and 2 stored in a package library,both called from 'ok' button on the main form as follows:
DECLARE
     V_USER_ID users_codes.USE_ID%TYPE;
     V_PASSWORD users_codes.use_pass%TYPE;
     V_EXIST BOOLEAN;
     v_insets USERS_PRIVILAGES.I%TYPE;
     v_deletes USERS_PRIVILAGES.D%TYPE;
     v_retrieves USERS_PRIVILAGES.R%TYPE;
     v_saves USERS_PRIVILAGES.S%TYPE;
     AL_ID NUMBER;
BEGIN
          V_USER_ID :=:TI_USRCOD;
          V_PASSWORD :=:TI_USRPSW;
     :GLOBAL.USR_CODE :=V_USER_ID;
     :GLOBAL.PASSWORD :=V_PASSWORD;
     V_EXIST :=SECURITY_NEW.LOGON_AUTH ( V_USER_ID ,
     V_PASSWORD );
     IF V_EXIST = TRUE THEN
               SET_ALERT_PROPERTY('NOTE',ALERT_MESSAGE_TEXT,'V_EXIST = 1 ');
               AL_ID := SHOW_ALERT('NOTE');
ELSE
               SET_ALERT_PROPERTY('NOTE',ALERT_MESSAGE_TEXT,'V_EXIST = 0 ');
               AL_ID := SHOW_ALERT('NOTE');
END IF;
     IF V_EXIST =TRUE THEN
                    SECURITY_NEW.Menu_Status ( V_USER_ID ,
          v_insets ,
          v_deletes ,
          v_retrieves,
          v_saves );
               MESSAGE(' Priv Exist' ||V_USER_ID||', '|| v_insets||' , '|| v_deletes||' , ' ||v_retrieves||' , ' ||v_saves);
     :GLOBAL.insets :=v_insets;
     :GLOBAL.retrieves :=v_deletes;
     :GLOBAL.deletes :=v_retrieves;
     :GLOBAL.saves := v_saves;
     END IF;
     CALL_FORM('F_Frame_MDC');
END;
==========================================================
Above code returns my parameters just fine.
My doubt now is:
1-how can i give alll privilages to user1.
2-how can i give Select only privilage to user2.
==========================================================
For clarification i used the following code in a when-new-record-instance
--when_new_block_instance
--result protected to be updated
DECLARE
BEGIN
-- MESSAGE(' Priv' ||:GLOBAL.insets ||', '|| :GLOBAL.retrieves||' , '|| :GLOBAL.deletes||' , ' ||:GLOBAL.saves );
--     MESSAGE(' Priv' ||:GLOBAL.insets ||', '|| :GLOBAL.retrieves||' , '|| :GLOBAL.deletes||' , ' ||:GLOBAL.saves );                    IF :GLOBAL.insets =0 THEN
IF :GLOBAL.insets =0 THEN
                              Set_Block_Property('MISSION_CODE1',INSERT_ALLOWED,PROPERTY_FALSE);
                              Set_Block_Property('MISSION_CODE1',UPDATE_ALLOWED,PROPERTY_FALSE);
                              Set_Block_Property('MISSION_CODE1',DELETE_ALLOWED,PROPERTY_FALSE);
                              MESSAGE('ÚÝæÇð ÇáãÓÊÎÏã ÑÞã'|| ' ' || :GLOBAL.USR_CODE || 'ÛíÑ ãÓãæÍ ÈÇáÅÏÎÇá Ãæ ÇáÊÚÏíá ');
          RAISE Form_Trigger_Failure;
                    ELSIF :GLOBAL.insets =1 THEN
                              Set_Block_Property('MISSION_CODE1',INSERT_ALLOWED,PROPERTY_TRUE);
                              Set_Block_Property('MISSION_CODE1',UPDATE_ALLOWED,PROPERTY_TRUE);
                              Set_Block_Property('MISSION_CODE1',DELETE_ALLOWED,PROPERTY_TRUE);
                    END IF;
                    IF :GLOBAL.retrieves =0 THEN
                         Set_Block_Property('MISSION_CODE1',QUERY_ALLOWED,PROPERTY_FALSE);
                              Set_Block_Property('MISSION_CODE1',DELETE_ALLOWED,PROPERTY_FALSE);
                              Set_Block_Property('MISSION_CODE1',UPDATE_ALLOWED,PROPERTY_FALSE);
                              Set_Block_Property('MISSION_CODE1',INSERT_ALLOWED,PROPERTY_FALSE);
                              MESSAGE('ÚÝæÇð ÇáãÓÊÎÏã ÑÞã'|| ' ' || :GLOBAL.USR_CODE || 'ÛíÑ ãÓãæÍ áå ÈÇáÅÓÊÚáÇã ');
          RAISE Form_Trigger_Failure;
                    ELSIF :GLOBAL.retrieves =1 THEN
                         Set_Block_Property('MISSION_CODE1',QUERY_ALLOWED,PROPERTY_TRUE);
                         Set_Block_Property('MISSION_CODE1',DELETE_ALLOWED,PROPERTY_FALSE);
                              Set_Block_Property('MISSION_CODE1',UPDATE_ALLOWED,PROPERTY_FALSE);
                              Set_Block_Property('MISSION_CODE1',INSERT_ALLOWED,PROPERTY_FALSE);
                    END IF;
                    IF :GLOBAL.deletes =0 THEN
                    Set_Block_Property('MISSION_CODE1',DELETE_ALLOWED,PROPERTY_FALSE);
                              Set_Block_Property('MISSION_CODE1',UPDATE_ALLOWED,PROPERTY_FALSE);
                              Set_Block_Property('MISSION_CODE1',INSERT_ALLOWED,PROPERTY_FALSE);
                              MESSAGE('ÚÝæÇð ÇáãÓÊÎÏã ÑÞã'|| ' ' || :GLOBAL.USR_CODE || 'ÛíÑ ãÓãæÍ áå ÈÇáÅáÛÇÁ ');
          RAISE Form_Trigger_Failure;
                    ELSIF :GLOBAL.deletes =1 THEN
                    Set_Block_Property('MISSION_CODE1',DELETE_ALLOWED,PROPERTY_TRUE);
                              Set_Block_Property('MISSION_CODE1',UPDATE_ALLOWED,PROPERTY_TRUE);
                              Set_Block_Property('MISSION_CODE1',INSERT_ALLOWED,PROPERTY_TRUE);
                    END IF;
                    IF :GLOBAL.saves =0 THEN
                         Set_Block_Property('MISSION_CODE1',DELETE_ALLOWED,PROPERTY_FALSE);
                              Set_Block_Property('MISSION_CODE1',UPDATE_ALLOWED,PROPERTY_FALSE);
                              Set_Block_Property('MISSION_CODE1',INSERT_ALLOWED,PROPERTY_FALSE);
                                        RAISE Form_Trigger_Failure;
                    ELSIF :GLOBAL.saves =1 THEN
                              Set_Block_Property('MISSION_CODE1',DELETE_ALLOWED,PROPERTY_TRUE);
                              Set_Block_Property('MISSION_CODE1',UPDATE_ALLOWED,PROPERTY_TRUE);
                              Set_Block_Property('MISSION_CODE1',INSERT_ALLOWED,PROPERTY_TRUE);
                    END IF;
          END;
========================================================
I even tried to take the concerned parts in key commit and key-delrec
but it was only disabled 4 both users and then when press exit button it saves alll changes...
========================================================
It's urgent,immediate help will be much appreciated
Thanks in advance,
Regards,
Abdetu..
==========================================================

Hello Christain,
i am so sorry but there was problems in the internet connections so i wasn't able to reply to u immediately..
Well,ur guidelines to Globals as they r always charaters was a new info to me that make me change:
-the query,the return values when checked or unchecked it now returns n or y in the privilage forms which affects the behaviour of the select statment in my priivilage procedure instead of returning 0 or 1 it is now returning n or y.
-most importantly,either it was n or 0 i called themas characters from any form in the (WNFI Trigger) if :GLOBAL.INSERTS ='Y'
THEN SET_ITEM_PROPERTY.....etc.
-->what do you mean with "NULL values"? plz clarify...
i am displaying messages with the returned values from the called parameters assigned to the Globals in my loginForm,so if there is a privilage checked it returns with y if not it was previously returned with null.
--i aslo changed the where condition in my privilage procedure instead of :
BEGIN
                         SELECT I
                         INTO v_inserts
                         FROM USERS_PRIVILAGES
                         WHERE USER_ID = P_USER_ID
                         AND ( I = 'Y'
                                                  p_i :=v_inserts;
to the following :
===========
BEGIN
                         SELECT I
                         INTO v_inserts
                         FROM USERS_PRIVILAGES
                         WHERE USER_ID = P_USER_ID
                         AND ( I = 'Y'
                              or I = 'N');
                    p_i :=v_inserts;
============================================================
Then i yahoooooo it returns with both n and y values then a college at work made the following function:
===============
FUNCTION Change_Block_Property( Block_Name In Varchar2 , Process Varchar2 , Val_Flag     Varchar2)
RETURN BOOLEAN
IS
     Block_ID BLOCK;
BEGIN
     --WRONG_ALERT('WRONG_PASS','íÌÈ ÊÕÍíÍ ÅÏÎÇá ÇáÈíÇäÇÊ');
          Block_ID := Find_Block( Block_Name);
          IF Process = 'Insert' And Val_Flag = 'N'Then
                    Set_Block_Property(Block_ID , INSERT_ALLOWED , PROPERTY_FALSE);
                    Set_Block_Property(Block_ID , UPDATE_ALLOWED , PROPERTY_FALSE);
                    Set_Block_Property(Block_ID , DELETE_ALLOWED , PROPERTY_FALSE);
          End IF;
          IF Process = 'Query' And Val_Flag = 'N'Then
                    Set_Block_Property(Block_ID , QUERY_ALLOWED , PROPERTY_FALSE);
                    Set_Block_Property(Block_ID , DELETE_ALLOWED , PROPERTY_FALSE);
                    Set_Block_Property(Block_ID , UPDATE_ALLOWED , PROPERTY_FALSE);
                    Set_Block_Property(Block_ID , INSERT_ALLOWED , PROPERTY_FALSE);
          End IF;
          IF Process = 'Delete' And Val_Flag = 'N'Then
                    Set_Block_Property(Block_ID , DELETE_ALLOWED , PROPERTY_FALSE);
                    Set_Block_Property(Block_ID , UPDATE_ALLOWED , PROPERTY_FALSE);
                    Set_Block_Property(Block_ID , INSERT_ALLOWED , PROPERTY_FALSE);
          End IF;
     Return True;
End;
=========================================================
and called this Function from (wnfi Trigger) as:
==================================
Declare
     V_EXIST Boolean;
BEGIN
     IF :GLOBAL.Insets = 'N' THEN
               V_EXIST := ATT_SECURITY.Change_Block_Property ( 'EMP_MISSIONS' , 'Insert' , 'N' );
     End IF;
     IF :GLOBAL.Retrieves = 'N' THEN
               V_EXIST := ATT_SECURITY.Change_Block_Property ( 'EMP_MISSIONS' , 'Query' , 'N' );
     End IF;
     IF :GLOBAL.Deletes ='N' THEN
               V_EXIST := ATT_SECURITY.Change_Block_Property ( 'EMP_MISSIONS' , 'Delete' , 'N' );
     End IF;
End;
=======================================================
To Handel the only case that return with no privilage assigned to a user
and it finallyyyy on the dead moments of losing hope the darkness of don't know how turns to light and i works fine..
==========================================================
thank u Christian u r a friend indeed,i reappologize for not beeing on line with u..
Thank u very much for the loyal help u offered to me and the useful tips to refine and optimize my code...
Kissess and Hugs Christian
====================
Best regards,
Abdetu.
=========================================================

How to give other material as a free good

Hi all,
Here i am getting doubt how to give free good for one material to another material. for ex:- if customer buy product A he will get product B as a free good how do we configure in to sap. i tried in exclusive method in the sales order it is executing and when coming to delivery and billing free good line item is not getting in deliveries and billing how to do this. plz tell the required steps to do this.
Thanks & Regards,
kishore

Hi,
This can be done in two ways.
1)Create a BOM with the product A as the header material.Make sure that the sub items are for free of cost.Pricing will be done only for this header.
2)Mainatin the different item category for both material A and material B.
Goto VOV7 T.Code.
Select material B's item category.
Details.
Maintain the pricing as "B".
Save.
Regards,
Krishna.

How to give out a status message indicating the number of fields selected

Hi experts,
I hope some one might have done what I'm trying to do. Could some one please show me how to give out a status message saying for example how many fields have been give out(or selected) in the t_ouput in an alv grid? Is there a FM that could do this? I mean like giving the FM the t_output and it will show a status message with the number of fields selected?
Thank you for your input.
Nadin
Message was edited by:
nadin ram

Hi Ram,
Write this code,
Message 'Select Only Ten Fields' type 'I'.
It displays The Message in Message Box.
Or if you want the Error Message means,
Message 'Select Only Ten Fields' type 'E'.
Thanks,
reward If Helpful.

How to give discount only to 1st 50 customers

Similar Messages

Maybe you are looking for