How to give free to a product

hi,
How can we give free to a product where and how it has to be done . i.e consider cycle i like to give a umberlla free then if a customer order 10 cycle then i have to give them 10 umberlla while delivery . how can do it help me ......

Hi Sheeba,
Please go through this link it will help you about Free goods process in SAP SD
http://help.sap.com/saphelp_47x200/helpdata/en/dd/55fa34545a11d1a7020000e829fd11/frameset.htm
I hope it will help you,
Regards,
Murali.

Similar Messages

How to give other material as a free good

Hi all,
Here i am getting doubt how to give free good for one material to another material. for ex:- if customer buy product A he will get product B as a free good how do we configure in to sap. i tried in exclusive method in the sales order it is executing and when coming to delivery and billing free good line item is not getting in deliveries and billing how to do this. plz tell the required steps to do this.
Thanks & Regards,
kishore

Hi,
This can be done in two ways.
1)Create a BOM with the product A as the header material.Make sure that the sub items are for free of cost.Pricing will be done only for this header.
2)Mainatin the different item category for both material A and material B.
Goto VOV7 T.Code.
Select material B's item category.
Details.
Maintain the pricing as "B".
Save.
Regards,
Krishna.

HOW CAN APPLY FREE GOOD 4 PRICING PROCEDURE?

TELL ME SIR HOW CAN APPY FREE GOOD 4 PRICING PROCEDURE?

Hi Pradeep
1.Run trans. VBN2 to first create master record for free goods as follows:
Enter following information in selection screen:
- Free goods type: NA00
- Sales org, distribution channel, customer # and execute.
Now in next screen create the record as follows:
- First select the exclusive button and verify that you are in exclusive view.
(that is if you want exclusive)
- Material#, Min qty - Say 34 cartons. (check in what units you want to manage)
From: 34 cartons
unit of measure:
Free goods: 12 Pcs
Unit of measure: Pcs
Calcualtion type: 1 or try the other options
Deliver control: Blank or any of the other options suitable to you.
Now save and exit.
Now run VA01 for 34 cartons and press enter. The system will automatically propose the free goods
item at no additional charge. Try higher order qtys and see if the free goods qty are scaling up.
If not adjust the calculation parameters in the master record screen
It should be transaction VBN1. Sorry for the error.
VBN2 is to change the record. VBN1 creates it.
If you want to give free goods to some of the customers than
1. create a customer group say 99 for FREE GOODS
In Free Goods Menu:
2. add a feild catalog for CUSTOMER GROUP
3. create a condition table (free goods) say 555 only for customer group
4. create a sequence say FREE with condition table 555
5. create a condition type say FREE with
6. maintain pricing procedure say ZFREE with condition type FREE
Now assign:
7. Active Free goods Determination or Assign with your sales organisation this procedure ZFREE
8. Create free goods determination with transaction code /nvbn1 for FREE with Key Csuomer Group
99 for exclusive
Give customer Group say 99 and from 34 to 34 free 12
Thanks
G. Lakshmipathi

How to debug a report in production server

hello all,
how to debug a report in production ...
do i need to BREAK statement of that particular user.....
thanks in advance....

Vinay,
Process of Debugging in Production will be same as in Development or Quality.
But,it is not advisable to debug in Production because it may lead to inconsistency in data that's get saved to Database.So,based on the acitvity that you intend to debug you have to take some precautionary steps.Usually Debugging access will not be given in Production,even if they give debugging access you will not be having authorisation to change the values in runtime while debugging.You will not be able to put hardcoded BREAK-POINT because the Production client is meant only for display and not modifiable.
If you can provide more details of what you intend to Debug,you will be getting more info here.
K.Kiran

About 60gb of my 120gb on my MacBook Air is taken up by "other" What could it be and how can I free up some of this space?

About 60gb of my 120gb on my MacBook Air is taken up by "other" What could it be and how can I free up some of this space?

OmniDiskSweeper is a good program to see what's taking up space: http://www.omnigroup.com/products/omnidisksweeper/

How to install the new JSF product over existing?

I would like to download the trial product of jsf & struts, but I currently own the struts product.
How do I install the trial product and not mess up my current strut projects?
thx

Hi,
Download & install the NitroX for Struts-JSF product in a separate folder other than your struts installation.
And then launch NitroX (Start > M7 NitroX > NitroX 2.1), this will give you a separate Struts-JSF trial license valid for 15 days.
Thanks
M7 Support

How to download free SAP GUI front end for ECC6

Hi,
How to download free SAP GUI -Front end for ECC 6
SD

Ask your Basis people and they can give it to u, Its take almost 1 GB of Space or even u can try in the internert for SAP GUI version for free download. SAP GUI for Windows 7.20 patchlevel is now available.
You may download it from the SAP Service Marketplace here.
Best Regards,

How do I Determine the latest product-specific patches for EBS 10.1.1 updgr

I am in the process upgrading EBS 11i to 12.1.1 and currently at step 3:12 of page 3-6 (Apply latest product patches (required)) of doc Part No. E16342-03.
How do I determine the latest product-specific patches - EBS in particular?
Can someone give me the link for the "download the American English patches."
Thanks and God blesss.
Mathias

Hi,
1) Is there a script that I can execute to find out exactly which are the installed products on our system so as to select the right products from the 'Product or Product Family'?How to Establish if a Product is Installed in e-Business Suite 11i [ID 420648.1]
2) I have installed 12.1.1 and I believe I have to upgrade to 12.1.3 but with the dozens of documentations around the upgrade it is just so difficult to pinpoint exactly which way to move forward with. For example I have lead to
Oracle E-Business Suite Release 12.1.3 Readme [ID 1080973.1] and I am wondering if I should follow the guidlines in this document?You will need to follow all the documents listed in
Database Preparation Guidelines for an E-Business Suite Release 12.1.1 Upgrade [ID 761570.1]
Interoperability Notes EBS R12 with Database 11gR2 [ID 1058763.1]
Database Initialization Parameters for Oracle Applications Release 12 [ID 396009.1]
Upgrading OracleAS 10g Forms and Reports in Oracle E-Business Suite Release 12 [ID 437878.1]
Oracle E-Business Suite Release 12.1.3 Readme [ID 1080973.1]
R12.1: Oracle Financials Pre-Upgrade Patch - Supplemental List for EBS CUP [ID 1127593.1]
EBS: R12.1 Oracle Financials Recommended Patches [ID 954704.1]
Thanks

HT1925 How do I cancel the ravel product n unistall since I no longer needs their service.Kindly assist.

Would like to know on how to cancel n unistall Ravel product from Adobe since its totally unfit for purpose.

After a quick hunt for the item in question (which you couldn't even be bothered to spell correctly!) I see it is based around a service/subscription model. Fine if you like that sort of thing, but generally not for me. There are two price plans $5.99 a month or $59.99 for a year (12 months for the price of 10). Yes, I'm aware that these are generally set up as auto-renewing subscriptions, like almost any other service contract (e.g. car insurance) so no real surprises there. I'm also fully aware that all sales on the iTunes Store are final. These are usually digital products, you can't "undownload" something, but if you don't get the product or service as described you can still ask for a replacement or refund, it's just not quite as simple as walking up to a returns counter.
The link I gave you above shows how you can turn off the auto-renewal. I'm sure at $5.99 a month if you'd decided that you didn't want the service any longer you'd just let the current month run out without complaining. Logic suggests therefore that you've paid for 12 months, are 1 or 2 months in and are now no longer happy with your bargain. I also notice that the product comes with an initial 30 day free trial, so you should have known exactly what you were getting before you committed any money.
Moan about "unfit for purpose", "cartels" and "hard earned cash" if you think it will make you feel better, but frankly you don't get that much sympathy from me. Take it to iTunes Store support. You can't call them. Use the report a problem links in your account history to establish a dialog via email.
tt2

How can i purchase apple latest product at apple store (at my own country)?

how can i purchase apple latest product at apple store (at my own country)? Because i saw apple product lunch and able to purchase at other country but the country i stay still unable to purchase. I have try to purchase it at country which nearby but it look unsucessful to delivery. please give me some advice for me to support it.

He seems desperate.
Diavonex wrote:
And pay 7% GST
You're lucky, we pay 10% GST here.

How do I perform a "Suite Product Activation" so that Acrobat will start working on my new Retina MacBook Pro?

How do I perform a "Suite Product Activation" so that Acrobat will start working on my new Retina MacBook Pro?
Like others, I have recently upgraded my MacBook Pro to the next generation and migrated all my information from old to new. Everything works seamlessly EXCEPT Acrobat. Photoshop, Indesign, Bridge and Lightroom all seem functional. Acrobat hangs with an error message "Suite Product Activation Needed. Acrobat was installed as part of a suite. To enable Acrobat, please start another element of the suite (such as Photoshop)." Needless to say, starting another element of the suite has NO impact on Acrobat.
This has to be a common problem. Now that Apple has made it really easy to migrate information from old to new machines, it has to come up all the time. What surprises me greatly is that I can't find any coherent answer in these forums.
So how do I get Acrobat running again?

Hi Anubha,
I do not understand what you said below.
I am running Adobe Acrobat Pro Version 9.5.5. I do not remember whether it came with Photoshop or InDesign.
When I open Photoshop, it opens without my having to follow any instructions to activate the software. As a matter of fact, I cannot find my Photoshop serial number anywhere in the Photoshop program itself. I do know it from my profile at Adobe.com. Are you suggesting I deactivate Photoshop on the new computer and then reactivate it using my serial number? Will it reactivate?
When you say
"/Library/Application Support/Adobe" at the root level of the startup disk (not the Library folder inside a user's Home folder)
what do you mean? I do not have a startup disk. I have the original installation disk but that version of Photoshop has been updated a few times.
After staring at your instructions for a while, I realized that you might be talking about the Library/Application Support folders resident on my Macintosh HD, although why you called it a startup disk is unclear to me. IAC, I went into those folders and duly moved the three folders into a new folder I called “Acrob1” and restarted Adobe Acrobat 9 and got the following error message: “AMT Subsystem Failure The licensing subsystem has failed catastrophically. You must reinstall of call customer support.” with a small (6).
By undoing my actions I am back to the staus quo ante.
Now what?
Regards, Robert

How to give Authorization?

I have created a 'Z' application which consists of create, change and display User interface.Whenever the user selects craete all fields go editable, change will have some fields editable and display all uneditable.I used only one view and i handled all three modes using invisible and enable property.
Now i want to allow only certain users to access create and change but display for all users.How to give this kind of autorization in webdynpro????
Please explain me about authorization in webdynpro taking my scenario?

Hello,
I hope you are aware of authority checks in ABAP in general. In your scenario, what you can do is: create one context attribute IS_AUTHORIZED of type WDY_BOOLEAN.
And in WDDOINIT of the component controller or view controller,
do the authorization check using AUTHORITY-CHECK stmt and if the check fails i.e. sy-subrc is not equals to 0, then
set the attribute IS_AUTHORIZED to false. Otherwise set it to true.
And you have to bind the enabled property of the buttons to this context attribute IS_AUTHORIZED.
Please refer to the following code sample:
    DATA lo_nd_selection_type TYPE REF TO if_wd_context_node.
    DATA lo_el_selection_type TYPE REF TO if_wd_context_element.
    lo_nd_selection_type = wd_context->get_child_node( name = wd_this->wdctx_flex_config ).
    lo_el_selection_type = lo_nd_selection_type->get_element( ).
AUTHORITY-CHECK OBJECT <objectName>
ID <name1> FIELD <f1>
ID <name2> FIELD <f2>.
IF sy-subrc <> 0.
* Prohibhit the user from modifying config
    lo_el_selection_type->set_attribute(
      name = `IS_AUTHORIZED`
      value = abap_false ).
ELSE.
    lo_el_selection_type->set_attribute(
      name = `IS_AUTHORIZED`
      value = abap_true ).
ENDIF.
Hope this helps!
Regards,
Srilatha

How to give backgound color

H All :
I am using collection in my application for textbox
HTMLDB_ITEM.TEXT(2,null,30,500,''style="background-color: RED"'')
i am using this which give me the red in color background effect
i am using
HTMLDB_ITEM.DISPLAY_AND_SAVE(2,null,30,500)
how to give a background or a fore ground color this item
please suggest
Thanks
Sudhir

It's actually quite easy.
What you have to do is write a custom tree cell renderer which extends DefaultTreeCellRenderer. In that class, your getTreeCellRenderer() method should do something like the following:
public Component getTreeCellRendererComponent(
    JTree tree, Object value, boolean selected,
    boolean expanded, boolean leaf, int row, boolean hasFocus )
        Component treeCellRenderer =
              super.getTreeCellRendererComponent(tree, value, selected, expanded, leaf, row, hasFocus);
        if (selected) {
            setForeground(Color.WHITE);
            setBackground(BACKGROUND_SELECTION_COLOR);
        } else {
            treeCellRenderer.setForeground(Color.RED);
        return treeCellRenderer;
Then you'll need to make sure that you call myTree.setCellRenderer(new CustomTreeCellRenderer());
cheers,
Greg

How to give the no of lines per a page in alv report

hi
could u plz inform me
how to give the no of lines per page in alv report
in ordinary report we can give line-count na
how can we give in alvs.
thanx
kals.

Hi Kalyan,
There is another Forum(Abap Development) where u can post abap related stuffs and u can also get quick answers there..
Cheers...
Santosh

How to give no of lines per page in alv report

hi
could anybody tell me
how to give no of lines per page in alv report
i need bottom of page too
if possible plz send the code too
it ll be very helpful to me
thanx
kals.

Hi,
This is possible, using some of the events in the ALV.
You could use AFTER_LINE_OUTPUT event and call you form after say, a certain line count is reached on the list output.
MOVE 'AFTER_LINE_OUTPUT' TO gw_event-name.
MOVE 'AFTER_LINE_OUTPUT' TO gw_event-form.
APPEND gw_event TO gt_events.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
       EXPORTING
            it_events                = gt_events[]
and define the form for each event as follows - this would be a dynamic call by the ALV.
*&      Form after_line_output
*       Form for the After Line Output Event in the internal table
*      --> rs_lineinfo
FORM after_line_output USING rs_lineinfo TYPE slis_lineinfo.
IF sy-linno eq v_linno.          "Defaulted value for line count
    perform write_footer.
    NEW-PAGE.
ENDIF.
ENDFORM.                    " after_line_output
For lines per page:
rs_lineinfo-tabindex would give you the index of the current line in the list, which you could use to read the t_outtab table, and reduce the line count of items displayed on the earlier page.
There are a few other events too, like BEFORE_LINE_OUTPUT and END_OF_LIST which you can use as required and print the data.
Regards,
Anil.

How to give free to a product

Similar Messages

Maybe you are looking for