How to give name to a label.

hellow everyone.
I created label and i do not know how to give a name like we are giving name to text in prompt node.
looking for help.

Hi,
I'm not clear what you mean by label. Are you talking about Text control. If so, you can give name similar way how you give for other controls
Regards
MP

Similar Messages

How to give individual horizontal axis label to two stacked bar of cartesian chart

I have a cartesian chart showing no. of xyz and no.of abc for a particular period of time. i.e. two bars corresponding to xyz & abc for Jan, and then again two bars corresponding to xyz & abc for Feb, and so on. I have used label function to give label to horizontal axis such that labels look like "xyz abc (nextLine) Jan" ,"xyz abc (nextLine) Feb".
But the issue is that the label is not centre alligned to the respective bars, i.e. xyz is not coming under xyz bar and abc is not coming under abc bar. the whole label's alignment is somewhere in between the two bars on x-axis. And i want to have label centre alligned to their respective bars, i.e 'xyz' should be centre alligned to 'xyz' bar, and 'abc' label should be centre alligned to 'abc' bar, along with the time period value. I have tried giving space in between "xyz" and "abc" but the problem occurs when data varies.They again don't seems centre aligned. I want x-axis label for each bar along with the categoryaxis's category field.
So,is there any way to achieve such functionality??

Could you post a screenshot of your current output and maybe a mockup of the desired output?

Hi guru's i want to dovelope or modify bapi how we can give name for bapi

hi guru's i want to dovelope or modify bapi how we can give name for bapi plz help me...

Hi,
If u want to assign the form to Standard sales order, The, this form in the NACE.
and the, Run from va02/03.
Reward Points,
Vamsi.

How to give own field name in alvgrid

how to give own field name in alvgrid
CLEAR LS_FIELDCAT.
LS_FIELDCAT-TABNAME       = G_TABNAME.
LS_FIELDCAT-FIELDNAME     = 'KBETR'.
LS_FIELDCAT-REF_FIELDNAME = 'KBETR'.
LS_FIELDCAT-REF_TABNAME   = 'KONV'.
APPEND LS_FIELDCAT TO RT_FIELDCAT.
here i want to give field name in output like this
Non-Deductible Tax.
thanks in advanced.

Hi Laxman,
Getting your required description is very simple.
Just fill these 3 parameters in your field catalog.
CLEAR LS_FIELDCAT.
LS_FIELDCAT-TABNAME = G_TABNAME.
LS_FIELDCAT-FIELDNAME = 'KBETR'.
LS_FIELDCAT-REF_FIELDNAME = 'KBETR'.
LS_FIELDCAT-REF_TABNAME = 'KONV'.
LS_FIELDCAT-SELTEXT_L = 'NON-DEDUCTIBLE TAX''. "LONG
LS_FIELDCAT-SELTEXT_M = 'NON-DEDUCTIBLE TAX''. "MEDIUM
LS_FIELDCAT-SELTEXT_S = 'NON-DEDUCTIBLE TAX''. "Short
APPEND LS_FIELDCAT TO RT_FIELDCAT.
The Comments besides the desctription tells what kind of format for display is ..
Regards,
Raghav

IPhoto - how to give a name to an event?

iphoto - how to give a new name to an event?

You can edit the name in the Info Pane, by clicking on the title under the Event in Events View, by clicking on the Event Title when viewing within an Event and in Photos view, you can edit the Event Titles there too.

"There was an error opening this document. The filename, directory name, or volume label syntax is i

"There was an error opening this document. The filename, directory name, or volume label syntax is incorrect."
I tried different versions, no avail.
I think it has to do with the password somehow, but I do not know. I can copy the files from the web folder to my desktop and they open fine (after entering the password AGAIN), but I can not open them directly form the web folder - it does not ask for the password again, just pops up the error.
Adobe's support really upset me (insert explicative here) by keeping me on the phone for 20 min, collecting all sorts of information about me (not the problem) with some lady who barely spoke English, just to tell me to go to the website. No surprise they need to charge for tech support, customer service is doing everything but "service". I hate companies that do this. I am thinking of using another PDF reader, I have heard good things about them. Check
http://en.wikipedia.org/wiki/List_of_PDF_software
Has anyone ever been able to find a fix? I can not find anything on this site.

Howdy, Moritz!
Thanks for the suggestion, but this is not an issue of filename and language conflicts, at least in my environment. I highly doubt that's the root cause of this issue.
The PDF files in my tests have all had very simple names, such as 123.pdf and test.pdf, as well as more complicated names with spaces in them. Nothing about the files contains anything outside of the English language, including the content and filenames.
From everything I've been able to determine, this is a WebDAV-related security issue that affects programs like Acrobat Reader. I know for a fact that MS's KB892211 WebDAV patch doesn't create the issue, however MS's update to that 892211 patch DOES create the issue. As I've outlined earlier in this thread, my extensive testing has proven this more than once.
At this point, I haven't been able to accurately uninstall the update to 892211 after the update has been installed. And, as far as I can tell, the update to 892211 comes down from MS as a Office and/or Windows Update component. So, everyone has it, the uninstaller doesn't work, and there's no documentation detailing what registry entries are being changed when the update to 892211 is installed.
My ultimate goal is to bring a test machine to the point just before the update to 892211 goes on, fire up the Registry, Process, and File monitors on my test box, and install the 892211 update. This should give me an accurate picture of what I need to restore in order to rid the machine of the update to 892211.
Until Microsoft officially fixes the issue, I am not totally sure how this will be resolved. I've ceased my work on the issue for now since copying the PDF file from the WebDAV share to the user's desktop gets the user what they wanted in the first place - the ability to open the PDF file!
Maybe, once some other projects slow down a bit, I might get back to creating a solution, but it's going to be a "hack" no matter which way you slice it. I'd much rather MS spend their time creating the solution. If I have to do it, my fee to MS will be quite HIGH! :*)
George B.

How to get names of all hard disks?

Hi,
How to get names of all hard disks.
For example:
There are 3 disks in my computer: A, C,D (OS:　Windows).
and then I want to know how many disks (3) and their names( A, C, D) are there?
Please give me some code sapmles. Thanks.
(---sorry, my English is not very well----)

Look at a few of these
http://onesearch.sun.com/search/developers/index.jsp?qt=%22hard+disk%22+label&qp=forum%3A31&qp_name=Java+Programming&col=devforums

Give names to discs of a same album

Hi !
I wanted to know if it was possible to give names to different discs of a same album.
For example, in Fire Emblem: Awakening Soundtrack, each disc (5 total) represents an emblem (Disc 1: Sable, 2: Gules, 3: Azure, 4: Vert & 5: Argent) or in the Nobuo Uematsu Limited Selection 2012 album, there are two discs named "Main Quest" and "Vinyl Treasure Side Quest".
And I like the idea each disc has a name, it's like chapters of a book, it's part of the album.
Is it possible to unite them under the same name (e.g. "Fire Emblem: Awakening Original Soundtrack" and "Limited Selection 2012") and label the discs with the names that are their own (Disc 1: Sable, Disc 2: Gules, ...) ? And if not, can it be an idea added in future version of iTunes ?
Thanks in advance !
Charles

N3M1C0 wrote:
If I get it, this way allows me to create 5 albums and put them all together at the same place in my Albums sorting but keep them separated.
Yes, this is correct. For example see this screen shot of how I have King Crimson's 13 disc 40th anniversary release of Larks' Tongues in Aspic tagged:
N3M1C0 wrote:
But I want to have the 5 albums under one cover. When I click this cover, I want it to reveal the 5 albums but with their names written next/instead of the disc number.
At this time this is not possible. If you give each album a unique name it will show up in the library as a unique album, as in my example above. However, there are a variety of ways to configure the ID3 tags, so I suggest you experiment until you find something you like.

How to give Authorization?

I have created a 'Z' application which consists of create, change and display User interface.Whenever the user selects craete all fields go editable, change will have some fields editable and display all uneditable.I used only one view and i handled all three modes using invisible and enable property.
Now i want to allow only certain users to access create and change but display for all users.How to give this kind of autorization in webdynpro????
Please explain me about authorization in webdynpro taking my scenario?

Hello,
I hope you are aware of authority checks in ABAP in general. In your scenario, what you can do is: create one context attribute IS_AUTHORIZED of type WDY_BOOLEAN.
And in WDDOINIT of the component controller or view controller,
do the authorization check using AUTHORITY-CHECK stmt and if the check fails i.e. sy-subrc is not equals to 0, then
set the attribute IS_AUTHORIZED to false. Otherwise set it to true.
And you have to bind the enabled property of the buttons to this context attribute IS_AUTHORIZED.
Please refer to the following code sample:
 DATA lo_nd_selection_type TYPE REF TO if_wd_context_node.
 DATA lo_el_selection_type TYPE REF TO if_wd_context_element.
 lo_nd_selection_type = wd_context->get_child_node( name = wd_this->wdctx_flex_config ).
 lo_el_selection_type = lo_nd_selection_type->get_element( ).
AUTHORITY-CHECK OBJECT <objectName>
ID <name1> FIELD <f1>
ID <name2> FIELD <f2>.
IF sy-subrc <> 0.
* Prohibhit the user from modifying config
 lo_el_selection_type->set_attribute(
 name = `IS_AUTHORIZED`
 value = abap_false ).
ELSE.
 lo_el_selection_type->set_attribute(
 name = `IS_AUTHORIZED`
 value = abap_true ).
ENDIF.
Hope this helps!
Regards,
Srilatha

How to give no of lines per page in alv report

hi
could anybody tell me
how to give no of lines per page in alv report
i need bottom of page too
if possible plz send the code too
it ll be very helpful to me
thanx
kals.

Hi,
This is possible, using some of the events in the ALV.
You could use AFTER_LINE_OUTPUT event and call you form after say, a certain line count is reached on the list output.
MOVE 'AFTER_LINE_OUTPUT' TO gw_event-name.
MOVE 'AFTER_LINE_OUTPUT' TO gw_event-form.
APPEND gw_event TO gt_events.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
       EXPORTING
            it_events                = gt_events[]
and define the form for each event as follows - this would be a dynamic call by the ALV.
*&      Form after_line_output
*       Form for the After Line Output Event in the internal table
*      --> rs_lineinfo
FORM after_line_output USING rs_lineinfo TYPE slis_lineinfo.
IF sy-linno eq v_linno.          "Defaulted value for line count
    perform write_footer.
    NEW-PAGE.
ENDIF.
ENDFORM.                    " after_line_output
For lines per page:
rs_lineinfo-tabindex would give you the index of the current line in the list, which you could use to read the t_outtab table, and reduce the line count of items displayed on the earlier page.
There are a few other events too, like BEFORE_LINE_OUTPUT and END_OF_LIST which you can use as required and print the data.
Regards,
Anil.

How can i change the column label text in a alv table display

how can i change the column label text in a alv table display??
A similar kinda of question was posted previuosly where the requirement was the label text was needed and following below code was given as solution :
* declare column, settings, header object
DATA: lr_column TYPE REF TO cl_salv_wd_column.
DATA: lr_column_settings TYPE REF TO if_salv_wd_column_settings.
DATA: lr_column_header type ref to CL_SALV_WD_COLUMN_HEADER.
get column by specifying column name.
lr_column = lr_column_settings->get_column( 'COLUMN_NAME1' ).
set Header Text as null
lr_column_header = lr_column->get_header( ).
lr_column_header->set_text( ' ' ).
My specific requirement is i have an input field on the screen and i want reflect that value as the column label for one of the column in the alv table. I have used he above code with slight modification in the MODIFYVIEW method of the view since it is a process after input. The component gets activated without any errors but while run time i get an error stating
"The following error text was processed in the system CDV : Access via 'NULL' object reference not possible."
i have checked in debugging and the error occured at the statement :
lr_column = lr_column_settings->get_column( 'CURRENT_YEAR' ).Please can you provide me an alternative for my requirement or correct me if i have done it wrong.
Thanks,
Suri

I found it myself how to do it. The error says that it is not able to find the reference object i.e it is asking us to refer to the table. The following piece of code will solve this problem. Have to implement this in WDDOMODIFYVIEW method of the view. This thing works comrades enjoy...
DATA : lr_cmp_usage TYPE REF TO if_wd_component_usage,
 lr_if_controller TYPE REF TO iwci_salv_wd_table,
 lr_cmdl TYPE REF TO cl_salv_wd_config_table,
 lr_col TYPE REF TO cl_salv_wd_column.
DATA : node_year TYPE REF TO if_wd_context_node,
 elem_year TYPE REF TO if_wd_context_element,
 stru_year TYPE if_alv_layout=>element_importing,
 item_year LIKE stru_year-i_current_year,
 lf_string TYPE char(x),
DATA: lr_column TYPE REF TO cl_salv_wd_column.
DATA: lr_column_header TYPE REF TO cl_salv_wd_column_header.
DATA: lr_column_settings TYPE REF TO if_salv_wd_column_settings.
Get the entered value from the input field of the screen
node_year = wd_context->get_child_node( name = 'IMPORTING_NODE' ).
elem_year = node_year->get_element( ).
elem_year->get_attribute(
 EXPORTING
 name = 'IMPORT_NODE-PARAMETER'
 IMPORTING
 value = L_IMPORT_PARAM ).
WRITE L_IMPORT_PARAM TO lf_string.
Get the reference of the table
lr_cmp_usage = wd_this->wd_cpuse_alv( ).
IF lr_cmp_usage->has_active_component( ) IS INITIAL.
 lr_cmp_usage->create_component( ).
ENDIF.
lr_if_controller = wd_this->wd_cpifc_alv( ).
lr_column_settings = lr_if_controller->get_model( ).
get column by specifying column name.
IF lr_column_settings IS BOUND.
 lr_column = lr_column_settings->get_column( 'COLUMN_NAME').
set Header Text as null
 lr_column_header = lr_column->get_header( ).
 lr_column_header->set_text( lf_string ).
endif.

How to give ** bydefault in password in module pool screen .

Hi experts
how to give ******* by default in password in module pool screen .
Thanks

Hi ,
    Double click on the field u will get a pop up window
    i.e. attribute window for that field.
    in that window you have a tab called Program at the bottom.
   in program tab you have many checkboxes.
check the check box with name *Entry.
and activate.
what ever you enter now will be in password formate
Regards
Ajay

How to give error message for the screen element text field when wrong i/p

How to give error message for the screen element text field when wrong i/p
when wrong input given
eg.
I have a text box with SBOOK-CARRID
so when user give wrong entry in text box i.e LG
then I should give some error stating that the the input is invalid or not available ,
now it showing the error of standard messages,
i want manual message to be displayed when error comes.
Thank you,
Regards,
Jagrut Bharatkumar Shukla

Hi all,
Thank you for your valuable reply,
but the thing is that its a screen field,
i.e text box not a selection screen
i created in screen layout
with name sbook-carrid
now i want to get error message display if wrong i/p is given
thank you.
Regards,
Jagrut bharatkumar Shukla,

How do I name documents in Pages for iPad?

How do I name documents in Pages for iPad?
When I create a new documents in Pages it is saved simply as Blank. I need to be able to edit this and give my new document a name such as "Pricing Proposal", etc.
Is this possible in Pages for iPad, and if so how do I go about it?

Ah yes: that works. I swear I tried that when searching for how to do this, but I must not have held my finger down long enough.
Thank you so much for your help

Error: filename, directory name or volume label syntax is incorrect

Using Acrobat Pro 8.1.3. and Flash CS3 ... Have a link on Flash site to a PDF file for people to print/download sheet ... When link is clicked, Acrobat opens and display the error message : "there was an error opening this document. The filename, directory name or volume label syntax is incorrect" ...
Needless to say, all of these things are FINE with NO error whatsoever.
I know it's not Flash, the link itself works. Computer crashed 2 weeks ago, had to reinstall everything, including Acrobat Pro, and redownload updates ... All was working fine B4 crash (including link from flash and opening of linked files with Acrobat), not anymore since reinstall ... Wondering if some update/patch is messing it up ... Help anybody? Thanks a lot!

How do your users generate the link? Windows makes it surprisingly difficult to reference a file. I usually resort to 3rd party tools that allow me to copy a file name or path.
Much to my surprise, I find that if I use '''Insert|Link''' and ''browse'' to the required file, it generates a fully qualified URI and it works correctly when sent and received in Thunderbird. That's TB31.5.0 on Windows 7 Pro. So the transmitted URI will have this format:
<code>
file:///F:/projects/xyz/xyz%20Project%20Spend%20Production%205%20off.xls
</code>
It won't work if you just drop in a plain old DOS type filename.
Yes, it's a chore to browse to the required file when you have it in plain sight in front of you in your file manager. I'm using FreeCommander XE which is able to generate properly formed pathnames and copy them to the system clipboard, and these can be pasted as-is into message body, or pasted into the address box in the Insert|Link dialogue.

How to give name to a label.

Similar Messages

Maybe you are looking for