How to global replace multiple objects using csm

Hi All
I’m new to this forum.
We use csm 4.6 to manage about 400 cisco firewalls. After a large migration project there are a lot of objects with different names but with the same content. I know you can do a find and replace on a single object on a single firewall policy.
But is it also possible to replace multiple object for 1 on multiple firewall policy
Example.
We have 40 groups named net-1, net-2 , net-3, …. net-40 the content of the groups are the same but their used in different firewall policies. I would like to replace them all in one go on all the firewall which has one of those groups to the new group net-all.
I’m also looking in a way to delete all non used object in the csm database (hosts, groups, network, services) Is this possible?
Kind Regards
Eduard

Jacob,
I decided to take one more stab at the logo before uploading it, and I finally figured it out.
I selected one white shape and one colored shape. In the pathfinder panel, I clicked on the second pathfinder icon -- TRIM. That "cut out" the part of the colored shape that I needed cut out, and it grouped the two items (white and colored shapes).
I ungrouped the items, then selected the white shape again and the other colored shape. Did this for each shape I needed cut out and now Bob's my uncle.
Not sure why this didn't work for me before -- I was either selecting the wrong pathfinder icon, or failing to ungroup the shapes after trimming them (before re-selecting the same white shape).
I've written down the procedure so I can remember how to do it next time!
Thanks,
Marlene

Similar Messages

  • How can I remove an object using Photoshop Elements 7?

    How can I remove an object using Photoshop Elements 7?

    You could probably use the 8 point garbage matte in this situation. I personally think the 8-point garbage matte is a bit cumbersome, but it should get the job done.
    1. Use the Razor Blade tool to place a cut before and after the shot with the bottle.
    2. Select the bottle clip.
    3. Press and hold Shift + Option, then drag the bottle clip up one track. This should create a duplicate clip directly above your original clip. (I'll refer to this duplicated clip as bottle2.)
    4. Locate the 8-point Garbage Matte filter and apply it to bottle2.
    5. Locate the Gaussian Blur filter and apply it to bottle2.
    6. Control click bottle1, and uncheck the "Clip Enable" setting from the shortcut menu. This will disable that clip.
    7. Double click bottle2 to load it into the Viewer. Then select the Filter tab.
    8. For the Garbage Matte filter, you'll notice 8 rows of numbers, these are the current locations for the control points, which you should be able to see in the Canvas. Start with point #1, and click the "+" button in the filters area, then in the Canvas click and drag to move the point. When you release the mouse button, you'll need to reclick the "+" button in the filters tab. Repeat these steps until you've isolated the bottle.
    9. Feather the edge of the matte.
    10. Adjust the Blur amount.
    11. Reenable bottle1. Playback the clip and make any necessary adjustments.
    Depending on your experience with Motion, you might also want to try sending bottle1 to Motion, then use Motion to control the layering.

  • How to find a annotation object using plugin API?

    How to find a annotation object using plugin API?

    You would use PDPage methods to find out how many on a page, and to
    get them in turn.
    Aandi Inston

  • How do I create multiple objects during runtime?

    I don't know how to create multiple objects during runtime, here's my problem:
    I get a String as input. Then I create an object called newobject. I put the object in a hashtable with the above string as key.
    Then comes the problem, in order to create a new object, I have to rerun the same class, which uses the same name (newobject) to create a 2nd object. Now my hashtable doesn't reference to my 1st object anymore...
    Is there anyway I can fill up the hashtable with different objects, and make each key point to each object it was supposed to?
    For those who want to see a bit of the program:
    public class PlayBalloon{
    public Hashtable ht = new Hashtable();
    for(){
    Balloon pB = newBalloon;
    newBalloon=new Balloon(pB);
    ht.put("Some input from user", newBalloon);
    for(){
    ht.get(s).draw;<= s=string, draw=own meth. in Balloon
    }

    I think i can see the problem that you are having. You have, in effect, duplicate keys in your hashtable - ie, two strings used as keys with the same name.
    The way that a hashtable works is as follows...
    When you ask for a value that is mapped to a key it will go through the table and return the first occurence it finds of the key you asked for. It does this by using the equals() method of whatever object the key is (in your case it is a String).
    If you cant use different Strings for your keys in your hashtable then i would consider writing an ObjectNameKey class which contains the String value that you are trying to put in the hashtable and an occurrence number/index or something to make it unique. Remember to override the equals method in your ObjectNameKey object or else the hash lookup will not work. For example
    class ObjectNameKey {
        private String name;
        private int occurence;
        public ObjectNameKey(String name, int occ) {
            this.name = name;
            this.occurence = occ;
        public String getName() {
            return name;
        public String getOccur() {
            return occurence;
        public boolean equals(Object o) {
            if (!(o instanceof ObjectNameKey)) {
                return false;
            ObjectNameKey onk = (ObjectNameKey)o;
            if (onk.getName().equals(name) && onk.getOccur() == occurence) return true;
            return false;

  • How to image trace multiple objects at once on Illustrator CC?

    Hello,
    This may sound like a stupid question, but I am having troubles trying to image trace multiple objects all in one go.
    I'm currently working on Illustrator CC and I remember this process being a lot easier to do on Illustrator CS5.
    I have a typical job where I create client specific barcodes on a separate program, and then bringing them into Illustrator to vectorize.
    When I used to do it in CS5, all I had to do was release clipping masks, select all 50 or so barcodes, then Image Trace - and voila, al of my barcodes were vectorized at once - easy.
    I now have to vectorize about 120+ barcodes and Illustrator CC is only letting me select & image trace one barcode at a time. There has to be a better way, and I'm hoping someone here can help.
    (I would open up CS5 and do it from there, but my work computer was recently replaced with a newer iMac and was only provided with Illustrator CC)
    Thanks!

    Not sure what your barcode-specific challenges and methods may be, but my general aversion to the image trace feature compels me to suggest that you just create the barcodes in vectors in the first place. I do that using Terry Burton's free online barcode generator.

  • How can I scan multiple items using my HP photosmart 2610 and them be able to be in one attachment​?

    I have an HP photosmart 2610 4 in1. How can I scan multiple items and put them in the same attachment using e-mail? Using my laptop.

    Hi @needyrhelp,
    Welcome to the HP Forums!
    I see that you are wondering how to scan multiple items using your HP photosmart 2610 and for them to be able to be in one attachment in your e-mail. I am happy to look into this for you!
    Please see the how to scan guide for the Operating System you are using. Here is the list of how to scan guides, Scan. Select your Operating System from the list, then select How to scan with HP software, then How to scan a multi-page original text document into a single file. You will need to scan each page one at a time, and add it to the same document. The how to scan guide will show you how. After done scanning to the file, then see the link for How to attach a scan to an email.
    If you do not know the Operating System you are using, please visit this website. Whatsmyos.
    Hope this information is helpful, and thank you for posting!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • How can I save multiple links using the "save link as" function?

    I'm trying to save about 300 pdf files. The link to each one is listed ona website. To save each one I'm right clicking on the link, selecting "save link as" and repeat.
    How can I select multiple links and save them?

    Actually you can save multiple page pdf's in elements.
    Try something like this:
    (This is easier if you have the project bin open)
    1. Select the first page
    2. Right click on that page in the project bin and choose Add Blank Page or as many pages as you need.
    3. Use the move tool and drag your pages down into the blank pages in the project bin
    4 Then File>Save As>Acrobat.PDF

  • How can I return multiple values using Oracle 9i Web Services ?

    Hi, Is it possible to return multiple parameters using WebServices in general ? And if yes, how do we do it using Oracle 9i WebServices ?
    At my client usually I call
    return_value = SoapClient.MehtodName(param1, param2, param3)
    If i need more than one return_value...how do we handle that ?
    Thanks,
    -Krishna

    Anyone has any ideas about this ?
    And also if i want a collection in one of the input parameters...how to do that ?
    Does Oracle WS have any such support ? Or we have devise our own way like sending it by separators or something like that ?
    Thanks,
    Krishna

  • How to instantiate a java object (using JNI)?(n'more)

    hey bschauwe, thanks for your last post, you were guessing but your 4th guess was right on the money of how id like to do it.
    "4. An alternative way to return data to java from C is to instantiate a java object (using JNI), then use JNI to call that object's setters, then return the object at the end of the C routine."
    I know now how to get the object's setters, I am just unsure how to instantiate a java object from the native C code using JNI. Also you said to returnt he object at the end of the c routine, that is just a good ol' return statement right? no other functions to release memory or anything are needed? So basically it would be something like:
    JNIEXPORT jobject retObj JNICALL Java_AbfaRegion_getJSourceData
      (JNIEnv *env, jobject thisObj)
            //instantiate the java object on retObj????
            //call setters with values from the c structures...
            //return retObj??? no other memory releasing needed?
    }Thanks again for all your help,
    Shane

    K sounds straight forward enough, the index in my book had nothing on <init> and I wasnt aware of the NewObject call. So my final (well for demonstration purposes) code should look something like:
    JNIEXPORT jobject retObj JNICALL Java_AbfaRegion_getJSourceData
      (JNIEnv *env, jobject thisObj)
         jclass clazz;
         jclass clazzTemp;
         jmethodID mid;
         jint val;
         jobject tempObj;
            //first instanciate the object
         clazz = (*env)->GetObjectClass(env, retObj);
         mid  = (*env)->GetMethodID(env, clazz, "<init>", "()V");     
            //Get Object
         tempObj = (*env)->NewObject(env, clazz, mid);
            //get Class reference to instantiated class
         clazzTemp = (*env)->GetObjectClass(env, tempObj);
            //Start calling setters to set the object up.
         mid = (*env)->GetMethodID(env, clazzTemp, "SetHeight", "(I)V");
         (*env)->CallVoidMethod(env,tempObj, mid, struct->myHeight);
            //set more members ...
            //return the object back to java with its members filled out.
            //before returning do I need to call (*env)->DeleteLocalRef(tempObj); ??
            return tempObj;
    }So is this how i do it for a function that is nativly defined as:
    public native JSources getJSourceData();?
    if this is right, then im cooking, and cannot thank you enough!
    -Shane

  • How can I send multiple attachments using SO_DYNP_OBJECT_SEND?

    Hi,
    I hope someone can offer advice on my problem.
    My requirement is to allow users to select one or more documents from an ALV grid.  I am then required to send these documents to multiple users via email using function module SO_DYNP_OBJECT_SEND.
    I can successfully send one document as an attachment.  However, I can't seem to figure out how to send multiple documents as attachments using SO_DYNP_OBJECT_SEND.  Is this done in the packing list?
    Is there some way to tell the program where the 1st attachment ends and the 2nd attachment starts?
    My attachment content is in i_att_cont.
      CALL FUNCTION 'SO_DYNP_OBJECT_SEND'
        EXPORTING
          object_hd_change = l_title
          object_type      = 'RAW'
          raw_editor       = abap_true
          starting_at_x    = '5'
          starting_at_y    = '1'
          ending_at_x      = '120'
          ending_at_y      = '20'
          edit_title       = 'X'
          external_commit  = abap_true
        TABLES
          objcont          = i_objcont
          rec_tab          = i_rec_tab
          packing_list     = i_packing_list
          att_cont         = i_att_cont
          exclude_fcode    = i_exclude_fcode
        EXCEPTIONS
          object_not_sent  = 1
          owner_not_exist  = 2
          parameter_error  = 3
          OTHERS           = 4.
    If you require more information, please let me know.  I will be happy to provide it.
    Thanks.

    I finally found the solution.
    The trick is to ensure you put the correct values in the body_start, body_num and objlen fields of the packing list.
    Each additional attachment should start (body_start) at the end of the last attachment + 1.
    The value for body_num is equal to the number of lines in the attachment being added.
    And the objlen field is calculated by multiplying the number of lines in the attachent * 255.
    Static data
       gs_packing_list-file_ext = lv_ext.
       gs_packing_list-transf_bin = 'X'.
       gs_packing_list-objla = sy-langu.
       gs_packing_list-objtp = 'EXT'.
       gs_packing_list-objdes = lv_filename.
       gs_packing_list-objnam = 'Attachment'.
       gs_packing_list-head_start = 1.
       gs_packing_list-head_num = 1.
    Body Start
       CLEAR lv_count.
       DESCRIBE TABLE gt_temp_att_cont LINES lv_count.
       gs_packing_list-body_start = lv_count + 1.
    Body Num + Object Length
       CLEAR lv_count.
       DESCRIBE TABLE gt_att_cont LINES lv_count.
       gs_packing_list-body_num = lv_count.
       gs_packing_list-objlen = lv_count * 255.
       APPEND gs_packing_list TO gt_packing_list.
    Hopefully this helps some desperate soul in the future.

  • How do you select multiple words using a Magic Trackpad?

    I know how to select multiple words with my mouse, but cannot figure out how to do it using my new Magic Trackpad. Here's the deal:
    Let's say you want to select "cannot figure out how to" in the sentence above. With my mouse, I'd place the cursor somewhere over the word "cannot," double-left-click and keep holding the button down. Then, dragging to the right, it would select each word in its entirety as I moved along the sentence. I do this all the time since it is a very quick way to select text.
    Okay, so how do you do this with the Magic Trackpad?
    I try a similar behavior, but it doesn't work. If I double-tap on "cannot," for example, one of two things happens. Either only the word "cannot" is highlighted and dragging does nothing to highlight more text. Or, if I'm quicker with the drag (aka swipe) right, it will select one character at a time starting from the cursor position when I double-tapped and not entire words, as I want.
    I'm stumped. Anyone?

    Jeffrey,
    The only good way seems to be by using the physical click on the Trackpad. Double physical click then drag. Much the way it's done on the mouse.
    Regards
    Captfred

  • List with multiple objects using Comparator

    Hi,
    I have a comparator to sort the fields of 2 objects. I have a resultlist which contains the CustomerAddressVO which contains the properties of both
    Customer and Address entities List resultList<CustomerAddressVO>.
    This CustomerAddressVO.java in turn have
    private long id
    private Customer customer;
    private Address address;
    Where Customer.java
    will have properties of customer
    Where Address.java
    will have properties of address
    Now i need to use the comparator for customer.getName() asc and address.id() desc, as i have mentioned the resultList doesn't directly contain this object as it contains CustomerAddressVO which in turn have those two object Customer and Address. Hence unless you iterate the list and retrieve the respective objects (customer, address) you cannot do the sorting through comparator. In such case how we can go about it. If you iterate the list also how we can pass the respective object to the compare() ? And more importantly we need to sort the columns of 2 different entites? Please clarify how we can go about it?
    Thanks.

    You can still do the sorting through a Comparator
    The compare method should take
    public int compare(CustomerAddressVO o1, CustomerAddressVO o2) { //..so you can then do
    01.getCustomer().getName();
    //and
    o1.getAddress().getId() together with relevant null checks

  • How to know the DB objects using the particular tablespace

    Hi All
    I have tablespace which is used by different database objects.
    I want to know which objects are using that tablespace.
    How can I know this??
    Thanks

    I have tablespace which is used by different database objects.
    I want to know which objects are using that tablespace.
    How can I know this??
    select owner,segment_name,segment_type,tablespace_name from dba_segments where tablespace_name='&TBS';

  • How can I replace multiple clips in my timeline w/ an edited version of their original source file

    I have a single audio .wav file that I've already cut up and assembled in in my timeline. If I want to do a noise reduction for the full .wav file in Adobe Audition, is there a way to perform the noise reduction only once, on the original .wav file, and then ensure that the new "audio extracted" file replaces all of the related subclips in clips in my timeline? I'm trying to avoid performing the same noise reduction on multiple subclips, when they originally all came from the same file anyway. I also want to avoid the clutter of adding a bunch more "audio extracted" files to my media.
    In the future, I'll probably need to change my workflow so that I perform the noise reduction first! But in the meantime, is there a clean/ simple way to retroactively do the edit, and replace the edited .wav file with it's respective subclips?
    Thanks!
    Alex

    SAFEHARBOR11 wrote:
    ...turn off other audio tracks, export a .wav (takes seconds)
    and do the Audition work on that and drop into timeline,
    simple and clean.
    This assumes that the .wav file in question
    is only used by itself on its own audio track.
    If there are other audio elements mixed on the track(s) along with
    the .wav file the OP wants to treat with noise reduction, this method
    will require "un-editing" the track(s) before you isolate for export.

  • How to create a multiple UOM using DIAPI

    Hi all,
    I need a sample code for multiple Unit Of Measurement (UOM) using DIAPI .Help me....

    Hi there
    Normally you cannot use a Button or a Click Box inside a Slidelet. So I'm doubtful you will be able to accomplish this. At least using a Slidelet. Perhaps you could re-think it and create the illusion of a popup window by layering in a Highlight Box or Image object to serve as the background, then presenting the Image and Caption using Advanced or Multiple actions.
    Cheers... Rick
    Helpful and Handy Links
    Captivate Wish Form/Bug Reporting Form
    Adobe Certified Captivate Training
    SorcerStone Blog
    Captivate eBooks

Maybe you are looking for