How to go about installing VM?

Okay, it's look like we're going to get vSphere license for two processors. What are the steps to get my virtual servers installed on an HP DL380 G7 server? Any link to step by step instruction or video tutorial is appreciated.
Thank you.

Okay, I found this VMware vSphere 5 - Installing ESXi 5 and it's exactly what I'm looking for -- step by step instruction from the start to finish. However, I have question regarding the host name. Does it always have to end up in .com, .edu, or dot something that actually exist on the Internet? Another word, can I name my host as "myHost" and that's it? Okay, so if I do not have iLo (as in this case of this tutorial), can I simply burn the ISO image as a CD media and install it on the server instead?

Similar Messages

How to do Clean Install?

I have a couple Mac Minis (A1176) that I want to sell. I have the disk for 10.5 Leopard and want to do a clean install and erase all the data currently on the machines.
I was able to install the OSX but not while erasing the personal data.
I looked up how to do it and found this tutorial but it didn't work. I have a usb keyboard plugged in and working, but when I hold down "option" on restart, nothing happens differently. It just goes to the login screen like usual. I also tried the "C" key on restart; nothing different happened.
I have tried this multiple times on both computers, I'm not sure how to go about installing a clean OSX. Does anyone know?

Hi, a bit confused... You did install OS from the DVD, or you could not???
Is this a Retail 10.5 Install Disc, or a grey machine specific/Intel only Install Disk?
What is the 2z691-****-A number on the Disc?
Without a proper Install Disc, might try this, but new owners should have an Install Disc included...
Open System Preferences>Accounts, unlock the lock, click on the little plus icon, make a new admin account, log out & into the new account.
In the same pref pane highlight your old account, click the little minus icon, then use Disk Utility to Secure Erase Free Space.

HT1349 How do I go about installing software from a disc onto my ipad2? I have no external drive, but do have a PC with iTunes on it. Someone suggested I could load it into iTunes and then sync with the iPad, but this suggestion doesn't seem to work.

How do I go about installing software from a disc (a language programme) onto my ipad2? Someone told me if I downloaded it to iTunes on my PC I could then sync it to the iPad but hav not been able to do that.

Even if there was a convenient way, the software will not run on the pad. Ios is a unique language, and only programs written for ios will run on the pad. All of the programs are in the app store. You might look there and see if the company that makes your sfotware also has an ios version, which would be in the store.

Question about installing a SSD drive and how to clone

Greetings,
I have a 2007 white macbook w/ 80GB HD. I have been thinking about installing a 60 GB SSD drive from OWC as the price has come down tremendously and honestly just to see how it improves boot time, launch, applications etc. I don't keep much stuff on this macbook as it is purely a "browsing" computer but I was wondering how to best clone the hard drive to the new one?
From what I understand, I use an application like Carbon copy cloner and backup "all data". Then, I turn the macbook over and follow the instructions for installing the new drive. Then, I guess I boot up and format the new drive with Snow Leopard.
When do I actually tell the recently formatted computer to transfer the data from the backup clone? Do I do this during the opening migration screen? I know how to import data from another computer using Firewire and a cable, however, does the new SSD formatted computer understand how to boot from the carbon copy cloner backup without installing this software on the new drive?
Cheers.

Julie:
I am no expert on SSDs. Here is how I would do it with a regular HDD. Note: You will need an external 2.5" enclosure.
Clone Old HDD to new HDD using SuperDuper
• Install new HDD in enclosure
• Connect to the computer and boot from internal HDD.
• Launch Disk Utility and format new HDD in enclosure (post for step by step directions, if needed)
• Download and launch SuperDuper
• In the Copy field select your internal HDD
• To is your newly formatted HDD in enclosure
• Using *backup all files*
• Click Options button
• Check *Repair Disk Permissions on Source*
• During copy Erase Destination HDD then copy from Source
• On successful completion Quit SuperDuper
• Shut down computer and with external still connected
• Option boot from external HDD to check clone.
• If everything checks out, remove new HDD from enclosure and install in computer.
• Install old HDD in enclosure (if desired)
cornelius

I have upgraded my OX from mountain lion to mavericks . the installer is asking for previous product key. How to know about previous key as the trial version is installed and I have paid for upgrade cost?

I have upgraded my OX from mountain lion to mavericks . the installer is asking for previous product key. How to know about previous key as the trial version is installed and I have paid for upgrade cost? I dont have the previous product key.

virenkhare wrote:
I have upgraded my OX from mountain lion to mavericks . the installer is asking for previous product key. How to know about previous key as the trial version is installed and I have paid for upgrade cost? I dont have the previous product key.
There are no keys, there is no trial version of OSX (ML or Mavericks) and Mavericks is free
What have you downloaded, and where did you get it

I am having trouble installing photoshop Lightroom. I have the S/N #... I need it to be confirmed and activated so i can receive an email to activate the system to my computer. I am not sure how to go about doing so.

I am having trouble installing photoshop Lightroom. The program is installed and has some sections blocked off. I have the S/N #... I need it to be confirmed and activated so i can receive an email to activate the system to my computer. I am not sure how to go about doing so.

If you have a serial number, you simply need to enter it into the proper fields.
Since you don't say what version of Lightroom, and what sections are "blocked off", let me guess that you have Lightroom CC, and you need to enter the serial number to turn it into Lightroom 6. Here are the instructions: Adobe Photoshop Lightroom Help | Serialize Lightroom CC trial to activate as Lightroom 6
And if that's not the right assumption, then please give us the details.

I purchased and downloaded CS6 for my MacBook Pro laptop. I now want to add CS6 to an iMac, how do I go about installing it on this new computer?

I purchased and downloaded CS6 for my MacBook Pro laptop from Adobe. I now want to add CS6 to an iMac, how do I go about installing it on this new computer?

Alibutlerdesigns you will use the same process to install on your second computer. You can copy the installation files using a USB drive if you do not wish to download the installation files again.

Lion keep crashing as it's about to install. How do I not install Lion

Lion keep crashing as it's about to install. How do I not install Lion. I want to keep my previous OS

The serial number is on the download page.

How to properly clean install: erase, partition hard drive, and install tiger then SL

Hello,
     I am a noob at this, so if responders would be kind enough to be detailed / specific with any instructions it would be most helpful! I own a dinosaur apparently (even though I don't think so): the white (not unibody) Intel macbook2,1 (late 2006) 1.83 GHz with currently 1GB of RAM, but I have 2x2GB RAM sitting next to me ready for install. However, first I would like to do a clean uninstall of my computer (running OS X 10.6.8 SL). I also would like to properly partition my hard drive while I'm at it.
     About 6 months ago I had serious crashing issues, along with kernel panics, hangs, applications randomly appearing & disappearing, system settings and options doing the same, fans running high (probably due to the low RAM available), and basically overall screwiness. So, after trying pretty much every option I could find on this community...and many others... (e.g. clean cache, clean old logs, already did a clean uninstall and install of SL, and much much more) I have reached my wits end. I would say that to date I've wasted a good solid 2 months with this.
     The clean install worked for MAYBE a month or so, but then it started acting up again with the fans (even without high pages in/out, CPU or memory usage) and excessive heat, along with the apps freezing and quitting (mind you it would be only two things open such as 1 word document and then firefox-- with flash disabeled). SOOOOOO long story short, I have purchased new RAM and I would like to try this once again, but to ensure I don't screw it up this time I would like some directions as to how to do the uninstall, partition, then reinstall. (currently to date I ensured all updates are completed---even though they are no longer released for SL, and I just did a full backup).
     Also, I need to first install Tiger (my original OS) as when I went to do a hardware test the other day this was not an option (and upon further research it is due to me not using Tiger as a first install and then using my mac box set for SL). I didn't use my original OS first because....one issue encountered when I had tried to install Tiger was that my Disc 2 (the applications one) took around 1.5 hrs to complete, but when I reached the last step of glory where I expected it to say COMPLETE it instead said that there was some sort of issue with the disc..........of course).
     Any help would be greatly appreciated.

1: If near a Apple Store or Authorized Repair, take it to then for a free evaluation, it might have other hardware problems now that it would be a waste of effort even continuing.
2: The RAM needs to be
Maximum Memory
3.0 GB (Actual) 2.0 GB (Apple)
Memory Slots
2 - 200-pin PC2-5300 (667MHz) DDR2 SO-DIMM
Basically what this means is you can put in a 2GB module and a 1GB module for 3GB total.
I wouldn't proceed with installing RAM just yet, not until you get a stable OS X version on the machine, you might have a hard drive needing to be replaced as well which you can do while inserting new RAM.
3: This User Tip can assist in installing 10.6 Snow Leopard, partition format etc.
How to erase and install Snow Leopard 10.6
Software Update fully immediately after setup.
There is no need to install Tiger, he 10.6 disk contains the full 10.6 version, you can either install the iLife from Tiger disks or use Pacifist from Charlesoft to extract them and place on your new install, then Software update to get them current.
4: If not successful then the drive also likely needs to be replaced, if so choose a 7,200 RPM SATA I w/1.5Gb/s connection.
Install/upgrade RAM or storage drive in Mac's
Repeat #3
If your getting beeping noises or "you need to restart" issues, it's likely one or more of the RAM modules is bad. Have it exchanged or swapped.
I advise good quality RAM the first time, if you buy cheap stuff it's just going back.
Don't go any further than 10.6.8 with that old machine, the performance will be terrible.

Has anyone been able to contact Adobe to learn why their Flash Player does not work on Mac OS 10.6.8, no matter how many updates you install? This seems like a big error by Adobe.

I have thee Mac computers with Mac OS 10.6.8, one of which is a Mac Pro. No matter how many updates I install from Adobe, their Flash Player does not work on any of these 3 computers. I don't know how to contact Adobe Systems about this problem, but I think it is their responsibility to make sure that their so-called "universal" software works proplerly on a relatively recent operating system like OS 10.6.8 that is still in widespread use. When you install the updates, nothing happens -- not even an error message. What is the point of a universal player that is not universal? It works fine on my MacBook Pro with OS 9 Mavericks, but it does not work at all -- indeed, has never worked -- on my 3 Macs with OS 10.6.8. Has anyone contacted Adobe Systems to find out why the Flash Player does not work with OS 10.6.8 and what they plan to do about it?

Where are you getting Flash from?
Get the appropriate dmg installer here and then run it.
http://www.adobe.com/products/flashplayer/distribution3.html
If it still won't install, do these two things: First uninstall any Flash by going into the second level Hard Drive Library>Internet Plug-ins, and trash the Flash Player.plugin and flashplayer.xpt. Then boot into Safe Boot, Shift at the startup chime (give it much longer than a usual boot) and run the installer while booted in Safe Boot.

How do I re-install software that came pre-installed on my mac?

How do I re-install software that came pre-installed on my mac?
I bought my first mac in 2003, in 2004 I bought MS Office: Mac. In 2006 I got another mac, this one (I'm pretty sure but not 100% certain) came with MS Office pre-installed. I'm still using that computer I got in 2006 (writing this message on it right now) and have been having problems with Word and have had no luck with trying to fix it. I recently came across my original installation disk for the version of MS Office I got in 2004. So, when I became frustrated trying to fix Word I just grabbed this old installer and reinstalled office, assuming in that moment that it was the same version I had been using. I got it all installed and working and went to load up my most recent document that I've ben working on and it won't load because it's a docx file. I don't know where else I would have gotten a new version of word, I'm not one for unnecessary updates and updating a word processor is about as unnecessary as it gets. I MUST have had a newer version of word pre-installed on my computer, because any time I've ever tried to open word files from this computer on my older mac the files wouldn't work, so any time I need to do that I either make a PDF or email myself the text.
Anyway, I'm assuming that apple has all my registration info on file and can confirm that I bought the software, can they provide my an installer? My other concern is that this computer was a christmas gift and was purchased by my dad, though I don't know whose name is on any kind of registration that may exist. The problem here is that he died, so I'm concerned that apple won't support my product because the original "owner" is deceased, even though I don't think he ever so much as laid a finger on this computer or even looked at it more than twice after he gave it to me.
What is my best course of action here?

I would have to presume the 2006 Mac was used, and came with Office 2008 on it from the seller. Apple has never offered Office as a bundled purchase, and it is not pre-installed with any Mac.
Since you have the disk for Office 2004, the activation key should be on a sticker on the CD/DVD sleeve. As I recall, anyway. I no longer have my 2004 copy to check. If you have the key, it doesn't matter who it originally belonged to. You can still enter it and activate the software.
Once you have that installed, you can install the XML converter for Office 2004. That will allow you to open from all newer Windows and Mac versions of Office. The only things that won't necessarily convert are features that don't exist in Office 2004, and so can't be translated correctly, or at all.
Microsoft is saying Office 2016 for Mac and Windows should be available for the official release sometime either late summer, or early fall. So hold off purchasing a new version if you can. MS offers to reduced upgrade price for Office. You'd pay full price for Office 2011, and then again for Office 2016.
And just to note. Office 2008 and Office 2011 work fine in Snow Leopard.

How do I re-install a new firefox 7 (or even revert to 6) and keep my settings & add-ons?

Sigh, wish I'd never upgraded. FF7 has been a hassle because of the constant crashes and unexpected slowdowns on numerous web sites (I have a decent computer, intel i5, 8gb ram, but I also have 1-2 dozen tabs open most of the time).
I'm thinking maybe a fresh start on firefox (I've been on this "profile" for several years now) may help. But I don't want to lose all the add-ons I've put in (including some of the ones I've disabled, but would like to keep anyway, since they may be useful in the future).
I can recover my bookmarks and firefox settings through Firefox sync, I assume. I have my passwords saved locally using roboform, and I don't care about my history, etc.
So, how do I re-install a new copy of firefox 7 (or maybe even revert back to 6) and get my add-ons back (a better way than making a list and installing each individually) and possibly keep some of the settings of these add-ons (I know some of them will let me export their settings)? Thanks.

Firefox 8 comes out Nov 8, look for it on the 9th unless you like to try all day to see if Help>About shows an update. Actually if your anxious try mozilla.com on the 8th.

How to create and install a toolbar to a browser using java

Hi all,
Can any one guide me about how to create and install toolbar to a browser using java ??
please any one help me about this,i am not getting any idea about this..
Thanks and Regards
Sandesh S

I doubt you can. Those browser toolbars are done by implementing to an API provided by the browser. That API, I don't believe, is provided via Java. But of course, that would be entirely up to the browser, not Java.

Firefox 5 has lost all my chrome tab's and capabilities which came with 4? how do I un install 5 and get back to my version 4?

firefox 5 has lost all my chrome tab's and capabilities which came with FF4? how do I un install 5 and get back to my version 4 & retain all my bookmarks at least I's also like to retrieve my Chrome capabilities as well?

Firefox 4 requires at least OS X 10.5 and an Intel Mac. There is a third party version of Firefox 4 that runs on OS X 10.4/10.5 and PPC Macs, for details see http://www.floodgap.com/software/tenfourfox
If you prefer, you can get the latest version of Firefox 3.6 from http://www.mozilla.com/en-US/firefox/all-older.html
Mozilla are working to prevent Mac users with non-compatible systems from getting the notification about Firefox 4, and also not displaying the "Download Firefox 4" button on http://www.mozilla.com

Where can I get help with partitioning my hard drive? I have a "non-genuine" version of windows that I need to replace but I have not a clue how to go about doing that.

I love my mac, but I unfortunately have to also run windows because of engineering software. I bought windows 7 at my campus computre store and one year later my computer is telling me that my software is "non-genuine." I need to fix this asap, but my computer store refuses to do anything because a year has passed. Microsoft wont help because I have a Mac.
My question is, where can I go to find someone who can help me uninstall the "non-genuine" windows 7 and replace it with a functional one?
Im allowed a free download of windows 7 because I'm still a student, but I have no clue how to go about uninstalling and reinstalling windows.
Thanks a bunch.

Hello,
This kind of question is best asked in the Windows Forums, however I've had some succession with a similar issue myself.
Non-Genuine Windows means that it can't authenticate your copy of Windows.
It's not a problem, all your need is a genuine product key code. Provided you don't have different version of Windows 7 installed to the one you are buying (for example windows 7 Home Premium and Windows 7 business) Then you can use the new key code.
Click on the Start Button and type: CMD (into the 'Search programs and files' field in the Start Menu)
The Start Menu will show 'CMD.exe',
Right-click the CMD.exe file and select Run As Administrator.
In the CMD window, type: slmgr.vbs -ipk <type your product key here>
To activate windows after changing the key, type: slmgr.vbs -ato
It should now accept the new key code and you will need to be connected to the Internet to authenticate.
If by chance the windows 7 types are different (One is Home premium say and the other is Business) then you will need to uninstall that copy of Windows 7 and install the new one. If your using BootCamp then you will need to go into BootCamp under system preferences and remove that copy of Windows (delete it)
Then create a new setup with your new Windows 7 disk.
For me I had the same type of windows, changing the product code worked. Saved me the bother of having to reinstall Windows again and it was all genuine.
Best of luck

How to go about installing VM?

Similar Messages

Maybe you are looking for