How to go ahead in SD

Hi,
I am working in ABAP since 2 years and i have worked on all types of programs in
ABAP like user-exits,ALE,IDOC,EDI,BAPI.I have prepared programs in SD module only so far.Now i want to become a SD techno functional.
According my friends suggession i have got WILLIAMS text book on SD and i have gone through this book and i have learned most of the basic configurations.
Previously i have domain experience also.Now how can i proceed to become a
techno functional in SD and what type of material i can use.
Thanks,
shyla

Hi Shyla,
Thats looks really good. Best material I always found was the sap library, then trying out various cofig chages reading F1 help. This is at the base level. You can follow it up with varied issues and requirements focussed in this forum where you can get insight into a variety of situations. Siemens material is also good. It adds valuable points.
But really to have specific config knowledge pl go through the library, spro and F1 help. Internet is another source to find any unanswered things or if you need more info on the same.
Hope it gives you some idea which can help.
All the best.
Thanks & Regards
Sadhu Kishore

Similar Messages

  • How to go ahead with this report

    Dear Pals...
            Greetings....Kindly help me with this report....The purpose of my report is to display the account payable based on the payment terms inside the purchase orders before invoice verification and the account receivable based on sales order.....
    How to go ahead with this report ....The output should be on monthly wise.....
    may i know is there any standard report from SAP for this or may i know the mandatory fields and tables for this....
    Thanks for your time

    Go back to the user if you are unfamialr with the fields you need in your report.   Have this user show you the fields on a screen.   Use the F1 Key to get the technical information.  Once you have this information, begin coding.

  • Archive and Install - how to move ahead after Leopard is in...

    After a long and frustrating day installing Leopard on my MacBook Pro (five months old), I finally have it up and running but don't know how I should recover settings and documents from my archived files. As per Apple's advice, I did the archive and install without preserving settings.
    Actually, documents are fairly straightforward, but what about Entourage data (emails, addresses, etc.) and Firefox settings, etc. Do I need to drag the old Applications, Librart, System, and User fils (from Previous Systems folder) into the new Finder under Leopard?
    Also, will applications like Photoshop, Lightroom, etc. need to be reinstalled?
    Please advise.
    Thanks very much.
    Regards,
    Tom

    I have a similar problem with Leopard's archive and install. No only did I have difficulty locating photos, music, etc. but I found that I didn't have "permission" to move them from the archive. I then with through the permission process giving myself access to everything on my Macintosh partition. (I have an iMac with both Mac Tiger and Windows XP on separate partitions). Only now I can't even get the Mac part of my computer to open at all! To be continued - - -.

  • How to move ahead using RFBIBLOO for FB01 BDC

    Can anyone guide me how to fill in the three structures namely BGR00, BBKPF and BBSEG with my data in order to use RFBIBLOO standard program for data upload for FB01.
    Thanx in advance,
    Alok.

    Hello,
    Check this thread,
    Re: Input File in RFBIBL00.
    and
    Check out the program, <b>RFBIBLT0</b>
    Regards,
    Naimesh

  • How to move ahead with the flex/php application structure

    Hi,
    Its been a week since I strated learning Flex. I am a regular php web develeper.  Since starting the flex learning I have got one thing there is no concept of "pages" in flex like in a regular php web site..there is "States".
    Now I have  this project requireing a login and then as per login user role different screens.
    Lets say three loging roles 1) teacher 2)Student 3) Admin
    Screens for each role will be diffrent as each have diffrent dashboard feature. I am confused with the structure i have decided is correct or not. Please review or suggest how to accomplish this.
    The main.mxml will have login form.
    it will have three states teacher, student, admin. and then these three will have sub states for particular roles features.
    While going to one book I read a  mxml file has atleast 1 state so can the structure be like this. (Is this possible or not)
    main.mxml will have login form
    three mxmxl files for teacher student admin and each will have statets for their respective features.
    Please reply. I am trying to find out by reading the documentation properly. But your guidance will speed things up and help me  understand things quickly.
    Regards
    Siddharth

    ultimately you want to be aiming to use a MVC structure
    but this is a good tutorial to get started.
    The later videos work through a login/logged in states example
    http://www.adobe.com/devnet/flex/videotraining.html

  • I purchased Groove2 music player,but it says " your library is empty" and suggests nothing how to proceed ahead. Only skin of the app is showing and thats all. I see my bucks going to drain. Can anybody help?

    Can anybody help me how to operate Groove2 music player?

    thanks, but the device displays on the top right of the latest version of itunes, and i doesn't allow a right click. You can open it and access the info inside but theres no option to "transfer items" anywhere :-s

  • How to Hide Timezone in Month View in Calendar App?

    I live in two timezones and go back and forth often so I use the timezone support in Calendar app for Mavericks and on my iOS devices and it's quite useful. However, one thing about it really stinks, imho.
    I cannot find a way to hide the timezone information associated with individual events in the month view of the Calendar desktop application. This redundant and superfluous information results in the truncation of the event information, which *is* important to me.
    For example, instead of an event in month view being displayed as "check amex payment", as it was before I enabled timezone support, it now says "check a... 3AM GMT+7". Since every event has this appended timezone information displayed next to it the month view of my calendar has become much less useful than it was previously. I don't really need to know how many hours ahead of GMT an event is, I pretty much just want to know what the event is and on what day, in the month view. Now I cannot tell what any event is unless I open it in in week or day view. Very frustrating.
    If anyone knows of a way to hide that information in the month view it would be greatly appreciated to post it here.
    thanks Apple Community!

    No one else has this problem or knows of a solution? *weeps quietly*

  • How to get opening balance of a g/l account using query ?

    Dear all,
    I'm developing consolidated g/l accounts debit,credit totals month wise with opening & closing balances thru query based report,
    i'have got expected results except opening balance g/l account,
    How to get opening balance of a g/l account based on date as conditonal parameter ?
    Any one throw light on this ?
    Jeyakanthan

    Hi ,
    Please kindly help me on this.I don't know how to calculate opening bal and closing bal over a period of time by Quarter, and how to generate the reprot using crystal reports and please suggest me on this how to go ahead with this report.
    Here you can go through the reprot requirement , and also an attachment of my Report template.
    we have "Category of Investment" , "Income On Investment" ,"Gross yield" and "Net yield" are  report fields.
    1)"Category Of Investment " is Hardcoded.
    2)In this we have to get  "Investment" column from VTBFHAPO(BZBETR Field) table Database based on
    Flow type(SFHAZBA) in VTBFHAPO table ='0100' for bonds category.
    3)"Income on Investment" also we will get from DB using the following formula.
      Income On Investment= "Interest IncomeAmortizationCapitalgain"
    4)With the Date field(Making Date dimension based on date(DCRDAT) field in VTBFAHPO table.
    By Current Quarter,Year to Date,Last year)
    5)Opening bal---Investment
    Purchase--Flowtype=0100
    Meturity/Sales--Flowtype=0200
    Closing balance=Opening bal+(Investment or Purchase)-(Meturity or Sales)
                                      '0100'                 '0200'
    Here '0100' and '0200' are Flow types based on this i need to get value from the same Field.
    we need to Calculate "Gross yield" .
    The bellow are formulas  to evaluate "Gross yield "
    Ist Qtr  .Gross yield=Investment income/(((April opening balanceApril closing balance)/2)((May opening balanceMay Closing Balance)/2)((June opening balance+June closing balance)/2))/3)
    Ist qtr. Year to date   Gross yield=Investment income/(((April opening balanceApril closing balance)/2)((May opening balanceMay Closing Balance)/2)((June opening balance+June closing balance)/2))/3)
    Investment income=interest incomeamortisationcapital gain
    Iind Qtr.Gross yield=Investment income/(((July opening balanceJuly closing balance)/2)((Aug opening balanceAug Closing Balance)/2)((Sept. opening balance+Sept. closing balance)/2))/3)
    Iind Qtr. Year todateGross yield=Investment income/(((April opening balanceApril closing balance)/2)((May opening balanceMay Closing Balance)/2)((June opening balanceJune closing balance)/2))((July opening balanceJuly closing balance)/2)((Aug opening balanceAug Closing Balance)/2)((Sept. opening balance+Sept. closing balance)/2))/6
    This data should display over a period of time. based on "Current Quarter","YearToDate" and "Last year"
    The quarter starts from April,i,e FY,  I Like this i need to generate the report.
    Thanks in advance.

  • How to store the data coming from network analyser into a text or excel file

    Hii everyone
    I'm using Agilent 8719ET network analyser and wish to store the data coming from netowrk analyser into a text file/ excel file.
    Presently I'm able to get the data on Labview graph using GPIB . Can anyone suggest how to go ahead after collect data sub vi. How can the data be stored into a file apart from showing on the graph?
    Attached is the vi for kind consideration...
    Looking for help
    Regards
    Rohit
    Attachments:
    Agilent 87XX Series Exceed Max Meas.vi ‏43 KB

    First let me say that your code really looks pretty good. The data handling could be made more efficient by calculating the number of datapoints that are going to be in the completed dataset and preallocating the entire array -- but depending upon your answer to my questions, the logic in the lower shift register may be going away - so we won't worry about that right now.
    The thing I need to know before addressing the data storage question is: Each time you call "Collect and Display Data.vi", how many element are in the array? Are you reading single data points, or a group of data? (BTW: if the answer to that question is obvious based on the way the other VIs are setup, I don't have the drivers so I can't tell what the setup values are.) Second, how fast does the loop iterate? Are we talking msec per loop?, seconds? fortnights?
    The issues here are two-fold: how much data? and how fast is it coming? The answer to these will tell you how to save the data.
    Mike...
    Certified Professional Instructor
    Certified LabVIEW Architect
    LabVIEW Champion
    "... after all, He's not a tame lion..."
    Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

  • How to schedule a background job using the Event concept..?

    Hi Folks,
    I have a requirement that, I need a schedule a background job.
    Once after the previous job successful only, new job should get triggered. How to go ahead with this..?
    For Eg, I am scheduling a job called ZTEST periodically for 1 minute. If the job is not get completing with in 1 minute, I dont want to start my new job. Only after the success of my old job, I want my new job to run.
    Waiting for ur replies.
    Regards,
    Savi.

    Hi,
    You can use events that have already been defined, or you can create new events for scheduling background jobs.
    If you wish to use new events, do the following to implement the event scheduling:
    Define and transport the event as a user event with transaction SM62.
    You must define only event IDs; event arguments are not defined in the R/3 System. Instead, you specify event arguments when you schedule a job to wait for an event and when you trigger the event.
    If you define a new event, you must also transport it to your production systems. The event transaction does not have a connection to the transport system. Instead, you must create a transport request for the event yourself.
    Do this to transport an event:
    Create a transport request.
    Start the editor in the transport request and enter the following:
    R3TR TABU <table name> where table name is BTCSEV for a system event ID, BTCUEV for a user event ID.
    Press F2 with the cursor on the table name to call up the screen for specifying the table entries to transport. In this screen, enter the event ID’s that you have created.
    Save and release the transport request. Ensure that it is imported into your production system(s).
    To trigger an event, add:
    – the function module BP_EVENT_RAISE to your ABAP program, or
    – the program SAPEVT to your external script, batch file, or program.
    When your programs execute these keywords, an event will be triggered in the R/3 background processing system. The event-based scheduler is started immediately. It in turn starts all jobs that were waiting upon the event, subject to normal background processing restrictions, such as the requirement that the job has been released to start.
    Schedule the jobs that are to run when your events are triggered.
    You can schedule jobs for one-time start or to be started whenever an event is triggered.
    Regards,
    Raj.

  • How can I enter special characters in a text title?

    Hello to all!
    Have been trying to get in a special character [the tick mark] onto a text title on my current project. Had gone to the special character option under EDIT menu, and added the desired special character to the 'favourite' list, but after that I do not know how to move ahead. Would like help.
    Thanks to all.
    Dr. Somanna

    Thank you for your reply.
    However I am afraid that neither double click nor drag/drop is adding the character to the text.
    Is there any other method to get special characters into FCPX?

  • How to create a Blanket Release in iProc from a approved requistion

    Hi Gurus,
    How to create a blanket Release in iProcurement from a approved requisition. I have followed the below steps.
    1. Created a BPA from Front end.
    2. Run Loader Data program.
    3. Above program reflected the BPA in iProc.
    4. Created requisition from BPA.
    5. Requisition has been approved.
    After this i am stuck. How to proceed ahead. I want to create a Blanket Release from approved PR and then receive in iProcurement.
    please help me on this. We are using 11.5.10.2
    Regards,
    john

    911765 wrote:
    Hi Mahendra,
    Thank you so much for your reply.
    So you mean to say that it all depends upon the Sourcing Rule and ASL based upon that system would automatically create a Blanket Release or If its Automatic Release/Review then we have to manually create release through autocreate.
    The reason why i am asking this query is now when i tested it, system is automatically creating release and starngely there is no Sourcing Rule and ASL has been defined.
    But we are looking for a Manual Release through autocreate window.
    It would be great if you could please suggest.
    Regards,
    JohnJohn,
    When you say system is automatically creating release..as far as i know...it should be referencing a PO..correct...in the releases window..
    can you pull that up..and see if you can get any clue..bcz that PO would BPA...
    Also I am not that much into Iproc...I don't know...whether Iproc has some other setups
    HTH
    Mahendra

  • How to Use COM Component in a Java Bean

    Dear Sir,
    How can I use a COM Component in a Java-Bean . I am having a COM Component for reading Weighment Reading on a Serial Port and want to use this Component in a Java-Bean . I would also like to call the methods of this COM Component inside my Java-Bean . COM Component is a dll file .
    Please guide me how to go ahead . If possible kindly provide some sample code for the same .
    With Thanks and Regards
    B V Mittal

    You need a Java to COM bridge like Jacob. Try searching this forum for more information, I've answered this question several times before.
    Dom.

  • How to reverse B/E  in case of dishonour of Bill.

    Dear All,
    I have created a bill of exchange for my customer, which results in following entries:
    B/E (Asset)            Dr. (Spl G/L 'Q')                                                 5000
    To Customer                                                                                5000
    On discounting it results in
    Bank                    Dr.                                                                    5000
    Bank Liability for B/E                                                                     5000
    Now my customer refuses to pay amount on due date.  Please explain how to go ahead with posting for such dishonour.
    Rgds
    Saurabh

    When I do F-20 it results in following entry as if bill has been paid:
    Bank Liab towards (B/E)                Dr                                                       5000
    To                    B/E (Asset)                                                                                5000
    Here I am not able to show Liability towards bank as well as customer (without special g/l) as current asset.
    Please help...
    Thanks...........

  • Help: How to call a plsql Package on click of a button in ADF

    Hi Guru's
    Please provide your suggestions, how to go ahead in ADF to call a plsql package when a button i clicked.
    I do have a knowledge of oracle callable statment to call the plsql package but not having any idea how to relate button click event in ADF.
    Thanks,
    SPC

    Create a service method in your Application Module to [url http://download.oracle.com/docs/cd/E14571_01/web.1111/b31974/bcadvgen.htm#sm0297]call the stored package, expose that service method on the client interface, and then drag the service method from the data control palette on to your page as a button.
    John

Maybe you are looking for