How to go back and change an edited angle to another angle in Multi-cam.

I almost completed my project but I noticed one of the camera angles I edited had someone walk right infront of the cam, so I would like to switch cam angles but dont know how to go about doing that without messing things up..
I am still very much a fcpx noob.
Thanks
D

Control click on the clip you want to change; Choose Active Video Angle and select from the drop down.
Russ

Similar Messages

Hi there, I updated to ML about 3 weeks ago I can not get in to my apps to download it again as when it was installing the first time I decided to skip the part where it said do i want to do the iTunes and iCloud thing. any sugentions how to go back and

Hi there, I updated to ML about 3 weeks ago I can not get in to my pps to download it again as when it was installing the first time I decided to skip the part where it said do i want to do the iTunes and iCloud thing. any suggentions how to go back and change that part or do I have to download it again.
Thanks
GeeRic

To set up iCloud, open System Preferences > iCloud, and follow its steps to use iCloud

HT4914 How do i replace and change my back up music in itunes match?

How do i replace and change my back up music in itunes match?

What mail program are you using?
If it’s Apple mail then goto Mail preferences and click on the signature tab.

How to revert back the changes that have made to Infoset

Dear Experts,
Can any one help me with solution for the below issue?
I have activated(checked) some navigational attributes to the infocube "XYZ".This "XYZ" infocube is used in Infoset and as well as in multiprovider.Instead of activating navigational attributes in the infoset ,mistakenly i have removed the infocube and reassigned(reconnected with previous settings) in the infoset.Now i realized that the technical reference names in infoset(For ex:"ABC_F12,ABC_F13") got changed and giving the problem in Multiprovider.And there are n number of queries build based on the multiprovider.
While iam trying to activate the inactived Multiprovider iam getting an error message saying "inactive infoobjects ...(.ABC_F12,ABC_F13 are not available)....
Can any body help me how to revert back the changes for the Infoset that i have made or anyother process to sort out this issue.
Earlier solutions will be appreciated.
Thanks & Regards,
Prathish.

Hi,
If the changes have been saved, then there is no automatic way of reverting the changes. To get the Infoset in the reqd state, you will have to move an unchanged copy into the dev sys. The easiest way would be to transport a copy from the Prod sys. But first you have to check whether the transport path exists. With the help of Basis team, you can do this.
wish u luck.
Regards,
Rahul

How to revert back the changes of a task in a change request ?

Hello experts,
Our ABAP team made a script and they have locked a change request for it. Whatever changes made in that script are directly written in that change request through different tasks. Yesterday they opened the script and found that some of the data in that script is missing. The task entry shows that the data is still there which was missing, but I am not able to find out how to revert back those changes which are there in the task, so that the missing data can be brought back again in the script? Can someone please tell me how to solve this problem ?
Regards,
Sanket

Hi,
If modification assistant was on while making the deletion, then the comment should exist for data which was deleted.
Else use the version history to display and recover the lost version.
For eg SE38 -> Give report name -> Display. Utilities -> Versions -> Version Management
Should show all the TRs which changed the object and can compare/restore versions too.
Regards,
Srikishan

Control-k key binding broken. How can I check and change my key bindings?

I use the Terminal app a lot. Unfortunately I am not able to use the control-k shortcut to cut lines in the terminal anymore. How can I check (and change) the Terminal key bindings?
Thank you!

Basing on your input, you should get the following values:
1) session keys
SK_ENC: 6DCE2A99BACB5207A7A96A92F114D66C
SK_MAC: 0D446132B168F75CD6F0A780693A4DD3
SK_DEK: 19F7B0F94837F32874B29B5EFB7809F6
2) host cryptogram
1B781553209748EA
3) Retail MAC
01761103B810F00E
Summing up, the External Authenticate command should have the following value: 84 82 01 00 10 1B781553209748EA 01761103B810F00E.
Try to compare it with your results.
Regards

I've bought an app called WhatsApp but I was not told that app doesn't work for ipod. So I would like to know how to turn back and get my money back.

I've bought an app called WhatsApp but I was not told that app doesn't work for ipod. So I would like to know how to turn back and get my money back.

Did you fail to look at the requirements before purchasing?
All sales are final. You can try contacting itunes support and asking for an exception

How can I check and change the size of photo or doc in iPhone or any other app

How can I check and change the size of photo or doc in iPhone or any other app

You would need software form a third party to have this option. The free software that comes with the 8600 doesn't have an option for that. Vuescan is the only software I could find that says it works with your pritner and has a descreen option. You have to purchase it, but it will give you more advanced options than the software that came with the printer.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

How can I copy and paste my edited Photo in photoshop elements 12?

How can I copy and paste my edited photo from photoshop elements 12 into a word document?

In full Editor:
Go to Select menu>all
Go to Edit menu>copy to put it on the clipboard
Go to your destination document>Paste
Hope that this works for you as well.

HT1657 I rented a movie and accidentally hit the menu button and now I can figure out how to go back and watch it . When I try to press rent again it says you have already downloaded this movie go to settings and check for downloads but I can find it.

I rented a movie and accidentally hit the menu button and now I can figure out how to go back and watch it . When I try to press rent again it says you have already downloaded this movie go to settings and check for downloads but I can find it download in settings.

I had the same issue with my apple tv 3rd generation. I rented Sinister and selected the "rent and watch now" option. Half way through the movie I accidentally pressed the menu button. When I looked for the rented movie on my apple tv I could not find it. Not even above the movie pannel where "purchased" and "top movies" comes up on the main menu. the apple tv suggests to go to settings>downloads but I don't have that option. I did go to settings> itunes store> check rentals but that didnt work either. It took too long to even check. Thank you because this SOLUTION worked great.
SOLUTION: How to reset apple tv 3 3rd generation to view rented movies:on the apple tv remote: press and hold "menu" to go to the main menu. Select SETTINGS> GENERAL >RESET >RESET ALL SETTINGS. After the apple tv resets, input all your information again and your rented movies should be visible when you cruise above the "movies" section. THANK YOU!!
Apple needs to solve this issue because honestly it took me 3 hours and a half to watch a movie that only lasted 2 BECAUSE I wast trying to solve the issue, reseting and all. blahh.

I have two yahoo mail accounts. I went to bed and both were accessible on my iphone. I woke up and one was not able to receive any mail. I have deleted the account and added it back and changed the password. Still does not work. Any help?

I have two yahoo mail accounts. I went to bed and both were accessible on my iphone. I woke up and one was not able to receive any mail. I have deleted the account and added it back and changed the password. Still does not work. Any help?

Download the yahoo email app, if you already deleted and reinstalled the email account and still have issue.
This is a known issue with Yahoo email account.

How can we create and change RSS XML?

1. What tools can we use to create RSS XML pages?
2. The pages should use data of the other XML pages generated by the XML-forms (e.g. News XML pages)?
3. How can we setup and change RSS XML templates (e.g. add new tags, change properties and values)?

Hi
Is there any way to create Rss for personal blogs and add it into our portal. That means we can add it newly by clicking button.
Thank You
Regards
Krishnamurthy

How can I drag and drop a Tidal job into another group?

How can I drag and drop a Tidal job into another group? In Tidal Help, it says-
In the Jobs pane, press and hold the Ctrl key and at the same time right-click and either individually select individual jobs within a job group or drag your mouse cursor over a block of jobs that you wish to select. You can only move multiple jobs between job groups if the jobs being moved are on the same level.
Keeping the right mouse button depressed, drag the cursor to the job group that you wish to move the jobs to and release the mouse button.
When moving jobs from one job group to another, you must decide if the moved jobs keep their original job group attributes or assume the calendar and agent characteristics of its new job group.
A confirmation dialog, offers three inheritance options for the jobs moved to the "new" job group parent. Select one of the following options:
However, when I attempt to follow those instructions, it doesn't work at all and there is no indication that it's even trying (i.e., I don't see the selected job following my cursor at all and all I get is the normal menu when you right click anywhere on the screen.)
Is there another way to do this or is there a master setting that needs to be changed so that ability is enabled?
Thanks.

Go into edit mode for the job group group and just manually edit the section for Parent job/Group.
Cheers

How to modify Find and Change indicator?

I use Find and Change in Applewors 6. At present, this operation finds what is specified but the indicator is colored green and is open, and hard to locate on a page when looking for a single letter. I changed it from its original pale orange to what it is now but now I would like to change it back to something easier to find. But I forgot how I did it and did not make a note. Would appreciate info on how to change this indicator. Thanks

Neil--
Thanks for info. I found it under System preferences>Personal>Appearance. You get a lot of choices in color and intensity. I was hoping to change the Find and Change indicator to solid but maybe this is not possible.

How do I go back a page on the Ipad mini? I do not see any arrows anywhere. Also when I go to my yahoo email account and open an email I can not find how to go back and log out. This is our first Ipad and it is very different frm android. Thanks

We just purchased our first Ipad. It is a mini with retina display 16 GB. How do I go back a page? I see no arrows to page back. Also when I log into a yahoo email account and open an email I see now way to log out? Thank you for any help

In Safari, (the web browser), there are specific arrows to go back and forward through website pages.
In other Apps, it will depend on how the App is built.
As to Yahoo Mai it depends on where you are viewing the email. If you are using the Mail App, then you don't log out. The Mail accounts in the Mail App are always there.
If you are using the Yahoo App, You can Tap on the folder at the top, then on your account/name, and then on Sign Out.

How to go back and change an edited angle to another angle in Multi-cam.

Similar Messages

Maybe you are looking for