How to go back in safari with OS X Maverick

In OS X MAverick the back arrow in top left corner no longer appear on the page and the swipe with two fingers on the mouse no longer work

From your View menu > Show Tooolbar?
Swipe should be check marked in system Preferences > Mouse > More Gestures > Swipe between pages?

Similar Messages

  • How do I back up iPhone with iTunes?

    How do I back up iPhone with iTunes? I have the original (1st generation) iPhone.

    it should automatically back up the phone once you connect it to your computer

  • How do you magnify  small writing with os x maverick? I have a imac

    How do you magnify  small writing with os x maverick? I have a imac.  Perviously i would push control and the mouse .

    Control scroll should still work in Mavericks, it does for me.
    In addition, Safari can also be Zoomed in to varying degrees by using either View Zoom In or the Command +- keys.

  • How can i use text expander with the new Mavericks,

    how can i use text expander with the new Mavericks,

    I regret upgrading to mavericks for the same reason
    ftamez wrote:
    how can i use text expander with the new Mavericks,
    Now I have been searching - and you have to buy an app and it will cost you $34.99 (what a rip off)

  • How to revert back to 10.6.8 from mavericks

    How to revert back to 10.6.8 from mavericks, a lot of programs i need to use are unsupported by the new update.  what can i do to revert my imac back to the previous OSX

    Why not simply udate your apps, it will be much easier in the long run if you do. However if you want to revert back to 10.6.8, then simply use your SL discs to reformat your HD, then update to 10.6.8 and then use Migration Assistant to migrate your apps and other data from your TM or bootable backup clone to your HD.
    Going forward it's much wiser to do you due diligence before updating. You have old apps that are probably PPC based, Apple supported those until Lion was released 2  years ago. The longer you wait to update those apps the more painful upgrading will be in the future.

  • How to go back in Finder with touch gesture?

    In Snow Leopard, I could to go back in Finder with two finger swipe. (equal with Safari's backword gesture)
    Now, Safari support go back by one finger swipe, but Finder does not. How can enable this?

    I think there might be a bug or two in how Finder responds to gestures.
    1) Finder does not use "Natural" gestures - the above solution does enable the Forward/Backward gestures in Finder, but they work exactly opposite from Safari.  Swiping left should got forward and swiping right should go backward.
    2) Finder requires 3-finger swipes for forward/backward, but Safari uses 2-finger swipes. This is annoying because I have to train myself to use different gestures for the same functionality. And it is also a true limitation bug because I cannot have both the "3-finger drag" and the "2- or 3-finger forward/backward for Finder" gestures enabled at the same time.

  • How to get back my safari bookmarks?

    First off all i like to say that i am really happy with my Macbook Pro! Apple did (again) a great development!
    I have decided to replace my 80gb stock drive with a 160gb drive from Samsung. My new Samsung drive is beautifully! All the space i need, fast and silent.
    Now the real problem: I can get all the data from my old HD by using a external sata-usb converter. But how can i get my safari bookmarks back? I can't find them any where on the HD.
    There should be a solution, or not? Where can i find them?
    Please help me, really need my bookmarks back!
    Already thanks for your answers!

    You'll find your bookmarks file here…
    ~/Library/Safari/Bookmarks.plist
    … so if you copy this from your old drive to your new drive you're all set. Be sure to quit Safari first.

  • How do i back up iphone with Itunes 11

    How do i back up Iphone using Itunes 11 now that it is changed significantly?
    Cannot find the usual drop down window for backup or restore etc.

    Hello, olemike.  
    Thank you for visiting Apple Support Communities. 
    I would recommend going through the steps in the troubleshooting article below.
    iOS: If you can't back up or restore from a backup in iTunes
    http://support.apple.com/kb/ts2529
    Cheers,
    Jason H.

  • How do I to update Safari with iPad 1

    Safari crashes regularly on my iPad. My iPad is running the "best" OS available for it iOS 5.1.1... I would like to upgrade Safari to see if the problem goes away. However, I can't figure out how to upgrade to the version of Safari that is compatible with iOS 5.1.1. Any ideas?

    The original iPad cannot be updated beyond iOS 5.1.1 which includes Safari so try a reset.
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
    If that doesn't help, tap Settings > General > Reset > Reset All Settings
    No data is lost due to a reset.

  • Satellite U400 - How to get back formatted partition with HDD Recovery

    Hello,
    I have bought a new Satellite U400 notebook with Vista Home preinstaled on it.
    I went throught initial configuration and after it has been done I realised that HDD partitions do not suits my needs.
    So I resised the "Vista" partition (acctually I have shrinked it) and made the "Data" partition bigger.
    I did not do anything with hidden partition.
    Unfortunately when I did this procedure I formated the "Data" partition.
    Now when I want to make backup DVD with TOSHIBA Recovery Disc Creator I got the error message saying that it is not possible because I have formated the "Data" partition.
    Are there any suggestion how to solve this error?
    The system goes fine, the only thing is that I am not able to backup and restore OS.
    Thanks Vecerka

    Another possibility besides getting yourself a new copy of recovery DVD is, that you could use 3rd party programs to make an image or backup of your actual system.
    I think Norton Ghost or Acronis TrueImage are good programs, but I only used last named one, so can't tell if Norton tool is equal to Acronis.
    And if you do not want to order recovery disc online, you always can visit your local ASP for doing this job for you. ;)

  • How can I back up project with just the used part of the clips?

    Hello all... I have a FCPX project that I would like to back up.
    Duplicate project is copying all of the event and all of the original clips...
    In my case the original clips are 1-2 hour interviews... I use about 2-3 minutes of about 30 of them...
    Back up is ridiculous...
    I'm looking for more of a media manager type of back up where it just backs up the clips from the timeline and gives me maybe  a bit of a handle on each clip...
    Make sense?
    I hope so... cause I've spent about 3 days trying to get this project on an external drive...
    Not very successful so far...
    SOS
    Thanks!

    I'm fairly sure Apple assumes most people want to keep their original footage... "forever." Media management in FCPX has received quite a lot of praise from professionals.
    Everything comes down to prep and organization.
    Projects are just pointers into media clips and render files.  If you want to trim down your projects, go to the File menu and select Delete Project Render Files...
    Deleting Event clips will kill a project no matter what. Archiving a project without the associated Event media is pointless. Best advice is to always keep your original media. That way you can reconstruct an Event later for the clips your project requires. As far as I know, there is no way to  delete (to the trash) Event clip ranges.
    If you know that you won't be using 90% of your footage and want to delete the extraneous original footage, I would recommend using Quicktime 7 Pro and selecting the ranges you think you'll need beforehand. This is easily accomplished by opening your original clips, setting an In and Out point (just like in FCPX) -- select Copy, then File > New and Paste. Save as a Self-Contained clip and import it into FCPX. QT7Pro does not alter the original footage (as much as possible, I imagine it has to occasionally build an intitial i-frame if your original is something like H.264, but other than that, you can't tell the difference.)
    To preserve a project entirely, you will  need to back up the associated Event clips as well. Those are the clips you need to worry about trimming. You should use Copy files to Final Cut Events folder on Import. You should be able to delete any transcoded media (High Quality and/or Proxy) before archiving (don't take my word as an absolute on that -- Tom probably knows for sure.) For simplicity, you should create an Event for JUST the clips you will be using for the project to backed up. That way, at the end, you can group the Event folder and the Project together for archiving (and with the smallest footprint).
    You could also simply Export your (trimmed) project as H.264 (FCPX uses the highest quality settings) without titles, effects, generators or transitions to retain the portions of clips you want to save/archive and delete all the original media — and forego everything stated above. You will still have an exceptional quality source for any subsequent projects using the same material and it would be compact enough. I wouldn't archive with ProRes (except maybe Proxy... it's about the same bitrate as the H.264 generated, except I think the H.264 would still be a better choice.) Using ProRes kind of defeats the purpose of archiving.

  • After system restore i reinstalled firefox, how to get back bookmarks etc with old firefox data?

    After system restore the only thing i have is old firefox data on desktop if all bookmarks, passwords are recovered it will be great help.
    P.S
    i reinstall firefox from drive other than c ,that was in downloaded form.
    Thanks

    The "Old Firefox Data" folder on the desktop has been created as the consequence of resetting Firefox.
    Doing a Session Restore may have reverted the profiles.ini file to a previous version that hasn't registered the new profile folder that a reset had created, so you may need to check for this.
    * C:\Documents and Settings\<user>\Application Data\Mozilla\Firefox\Profiles\<profile>\
    The "Application Data" folder in XP/Win2K and the "AppData" folder in Windows Vista and Windows 7 and later versions are hidden folders.
    *http://kb.mozillazine.org/Show_hidden_files_and_folders
    If you have a profile folder that is more recent than the "Old Firefox Data" on the desktop then you can use edit the profiles.ini file and change the path of the currently default profile to the name of the profile folder as you find in Document and Settings.
    *http://kb.mozillazine.org/Recovering_a_missing_profile
    *http://kb.mozillazine.org/Profile_folder_-_Firefox
    It is always best to be cautious with using System Restore as this can cause some file to be replaced with older copies, i.e. your Firefox installation and profile folder can get inconsistent and you may have to reinstall Firefox as well.

  • How to revert back to iMovie 9 after reinstalling Mavericks?

    Good Day All,
    I recently had to reinstall my OS (OSX Mavericks) for my MacBook Pro 13-inch Mid 2012 Model. Prior to this, I had iMovie 10 (yuck), AS WELL AS the old iMovie, which had remained behind in my applications folder (iMovie 9).
    Before I reinstalled the OS, I made sure to copy the iMovie 9.0.9 application to my hard drive, and once a clean OS was installed, I made sure to drag iMovie 9.0.9 back to my applications folder and run it, however I am met with an error:
    iMovie 9.0.9 has failed to start (not the exact words I cannot remember, as now whenever I launch it the icon pops up in my dock and than a split second later disappears)
    Is there anyway I can get iMovie 9.0.9 back after a clean OS install?
    I already downloaded this: http://support.apple.com/kb/DL1574 (the iMovie 9.0.9 update), however it fails to work, as the only iMovie I have on my machine is the horrible iMovie 10, and it required an older iMovie to update too.
    Any help at all will be very appreciated.
    Thanks
    _celis_

    try this code
    TYPES: BEGIN OF ty,
      sal TYPE i,
      END OF ty.
    data: a TYPE i,
          2a TYPE i,
          itab TYPE STANDARD TABLE OF ty WITH HEADER LINE,
          itab2 TYPE STANDARD TABLE OF ty WITH HEADER LINE.
    itab-sal = 10.
    APPEND itab.
    itab-sal = 10.
    APPEND itab.
    itab-sal = 11.
    APPEND itab.
    itab-sal = 9.
    APPEND itab.
    itab-sal = 15.
    APPEND itab.
    itab-sal = 9.
    APPEND itab.
    loop at itab.
      LOOP AT itab2 WHERE sal eq itab-sal.
      ENDLOOP.
      IF sy-subrc eq 0.
      else.
      APPEND itab to itab2. 
      ENDIF.
    ENDLOOP.
    LOOP AT itab2.
      WRITE:/ itab2-sal.
    ENDLOOP.

  • I need to get back in touch with UK based technica...

    Background - a few weeks ago I received help on the forum in connection with my modem re-booting, usually in the early morning. I got in touch with Bt Customer support who helped by getting the noise level back down but I still suffered from re-booting, consequent increases in snr and lower speeds. I switched from the HH3 to a Billion bipac 7700n router. This was a vast improvement. No more re-booting but occasional re-syncs instead - at least the snr and DSL speed stayed roughly at the same level. I did however want to eliminate the 4-5 re-syncs per day - a nuisance if you are trying to use the PC or streaming music when the connection drops. Customer support advised me to test the router in the BT test socket. Alas, when I looked inside my BT master socket I found that I hadn't got a test socket. Bt Customer support splendidly arranged for a BT engineer to come the next day to fit a test socket. This was just before Xmas. 
    With Xmas over, guests having gone and continuing to suffer from re-syncing, I connected the router directly to the new BT test socket. In the space of 9 hours there were 4 re-syncs.
    I e-mailed Bt customer support an extract from the router's systems log to seek their help. Within minutes I had a call from an operator in BT India who put me through to their technical desk. Unfortunately the technical desk did not have my e-mail and did not seem very interested in the background to my issue. After an hour in the phone I spoke to a supervisor who explained that he could not take my problem further until I had tried a new HH3. 
    Well the HH3 turned up today. On connection my snr went up to 10db and the DSL speed down from 6656 kbps to 4344 kbps. Needless to say I have disconnected the HH3.
    I should add that the BT engineer who fitted the new master socket said that in his view I needed a Broadband boost engineer and that he would put this in his report. 
    Advice on how to get back in contact with Uk based support would be welcome.  I had been making good progress!
    Solved!
    Go to Solution.

    Hi I suggest you contact the forum mods they should be able to get your problem sorted for you this is a link to them
    http://bt.custhelp.com/app/contact_email/c/4951
    they normally reply by email or phone directly to you within 72 hours
    They are a UK based BT specialist team who have a good record at getting problems solved
    If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

  • How to Run a SCSI Scanner with Firewire In OS X?

    Does anyone know how to run a SCSI scanner with Firewire in Mavericks?
    I have unsuccessfully tried the RATOC FR1SX SCSI-to-Firewire converter. The Ratoc is recognized as a Firewire device in the System Profiler (see pic below). However, the VueScan scanning software does not recognize the scanner.  I know the scanner works because I have been using it in an old HP PC. As such I  installled Windows 7 64 bit via Boot Camp to see if I could use the scanner, but had no luck.
    I have an iMac 21.5-inch, Mid 2010.
    ANY HELP?

    The Mac scanner driver is not seeing it as a native SCSI device assuming VueScan supports the model of scanner you have. (You did not list the scanner model.)
    Other than getting a modern non-SCSI scanner, a possible option would be to get a Thunderbolt PCI expansion chassis and a 'real' SCSI interface card. There is no guarantee this will work though as SCSI has been discontinued in the Mac world for years and years. If you then want to look at a SCSI card for use with the expansion chassis then look at the following.
    Hmm, just looked the AttoTech SCSI cards have been discontinued as well, as I said SCSI is ancient history in the Mac world.

Maybe you are looking for