How to go back to iPod version 1.1

I recently upgraded to version 1.2 of the iPod software. Apparently, there is a bug in this version.
I have a problem with audiobooks. When I start playing them, the playback starts immediately but the interface on the iPod hangs for several seconds. I can't change the volume, pause or do anything for at least 15 seconds. Version 1.1 did not have this problem.
I tried restoring my iPod, but this does not replace version 1.2 of the software.
Is there a way to fix this? Is there a way to go back to 1.1?

If you have iPod1,12.2.1_5H11Restore.ipsw than I presume that you have the iPod Touch 1 Generation.
To downgrade iPod touch from firmware 3.0 to 2.2.1 you have to place your ipod in DFU mode
To enter DFU mode turn your iPod off make sure that it is connected to your Mac or Pc and iTunes is on.
After you turn off completely your iPod press and hold for 10 seconds the home and sleep/wake button, after 10 seconds release the sleep/wake button while holding the home button pressed for another 10 sec.
On your Mac or Pc on iTunes you will see this message if you entered successfully in DFU mode: “iTunes has detected an iPod in recovery mode. You must restore this iPod before it can be used whit iTunes.” once in DFU mode your iPod screen should be black. Press ok then Shift Restore (Pc) or Alt Restore (Mac) browse for the file: iPod1,12.2.1_5H11Restore.ipsw if you have the iPod Touch 1 Generation if you have the iPod Touch 2 Generation you will need the iPod 12.2.1_5H11aRestore.ipsw
If you have problems entering DFU mode check this video: http://www.youtube.com/watch?v=Rb_ss0bljHY

Similar Messages

Downloaded Yosemite but installation not finishing. Now Mac is frozen. Any idea how to roll back to earlier version?

Downloaded Yosemite but installation not finishing. Now Mac is frozen. Any idea how to roll back to earlier version?

i have the same issue, really not happy, if i get an answer i will share with you.mark

How can I update my ipod version from 1.3 to 2.0 or higher

How do I update my Ipod version from 1.3 to 2.0 or higher?

Except for iPod touch (which runs iOS), each iPod model has different software. The version number doesn't really matter between different iPod models. The latest version of software for each iPod model is installed by iTunes.
Connect your iPod. In iTunes, select the iPod in the sidebar, under DEVICES. Over to the right, go to the Summary tab. You should see a button there that says Check for Update. Click it. If there is an update available for your iPod model, it will be installed. If not, you already have the latest version of software for your iPod model.

How do go back to a version that supports Real Player?

How do go back to a version that supports Real Player?

According to the instructions given on the Norton Community forum under "Other Norton Products/Comcast-Customers - Norton Toolbar Problem in Firefox 10", I have done everything necessary. And I do have a Norton toolbar (Safe Web and Identity Safe) when I open Firefox 10. As was mentioned in the previous posts here, you need to run manual LiveUpdate then reboot until you have version 5.2.0.13. Then reboot and run manual LiveUpdate again and reboot once more. One thing that I noticed is that Norton never told me that it had updated the patch for Firefox 10, so I didn't know. I guess if you have the toolbar when you run Firefox 10, then you have done it all.

HT4946 How to go back to previous version of iPad

I got a notice this week to up,date this changed my iPad to something that I really don't like how do I go back to precious version?

Hi
Thanks for your reply , the darn thing is that when I type it auto fills in the wrong language and I am set up for French and fills in anything but French when I type

How to get back to a version of iTunes that works?

I made the mistake of installing iTunes 10 - now my iPod is no longer recognized. How can I get an older version of iTunes to work? Each time I uninstall iTunes 10 and install an older version it won't start up. I get the error message that it was installed by a newer version so it can't be opened. I don't get it. Is there a way to completely wipe iTunes 10 off my computer besides going through the program manager to uninstall it? Had anyone heard if Apple is working on a fix for this buggy version of iTunes?

montana,
First of all, make sure Windows is showing file extensions and not hiding them from you.
C:\Documents and Settings\username\My Documents\My Music\iTunes\Previous iTunes Libraries\iTunes Library 2010-09-03.itl
That is my version 9 library that I updated on Sept 3rd. Yours can have a different date, but you get the idea.
Copy & paste it one folder up, into this folder
C:\Documents and Settings\username\My Documents\My Music\iTunes
Delete the version 10 itunes file, since you are not going to be using it.
C:\Documents and Settings\username\My Documents\My Music\iTunes\iTunes Library.itl
Right-click and rename the copy of the itunes v9 file so the date part is gone
C:\Documents and Settings\username\My Documents\My Music\iTunes\iTunes Library 2010-09-03.itl

How to revert back to pervious version?

Hi,
Is there any way to revert back to pervious version?
e.g. doc has 1,2,3,4,5 versions (and family is added to folder).
I would like to start back from version 3, is it possible? More or like i am looking for unix file restore like utility ...
Thanks,
-Niraj

Goto
PFTC->Workflow Builder->Goto->Workflow Builder->Choose version->Activate it.
You have to start a new Workflow instance for the change.
Thanks
Arghadip

How to go back to prior version

(Yes, I've searched the forums. If this question has been answered, I can't seem to find it.)
The latest to v11 of iTunes has seriously FUBARed my podcasts. I can no longer listen to them in my car. I'd like to roll back to a prior version unless and until Apple finally fixes this bug. I'm using Windows 7 and don't have any iOS devices synced to this computer (I use an iPod Classic). The threads I've found are either for Macs or iOS devices.
Thanks,
--Charlene

As stated, I already did a search.
Using the search you posted:
14 are for Mac (I'm Windows, stated in OP)
1 is asking how downgrading will affect an iPhone (I don't have any iOS devices, stated in OP)
1 is asking how to downgrade iOS (ditto)
The 4 that are Windows-related are all asking how to downgrade from v11 to v10.7; lots of folks hated v11 when it came out, but I'm fine with it. I'm trying to get rid of the most recent incremental update that ****** my podcast playlist.
--Charlene
<Edited by Host>

How to copy back my ipod music and playlists to a PC?

My computer got a virus and I had to reformat the hardrive, how do I put back all my music from my "ipod color display" back to my music folder in my pc with all the songs, song ratings and playlists?
Thank you for the help.

For iTunes version 7 or later, then you can transfer purchased iTunes store music from the iPod to an authorized computer by using the "file/transfer purchases from iPod" menu. Note that the maximum of 5 authorized computers applies here.
Find out how to do that here.
How to copy iTunes purchases from an iPod or iPhone to a computer.
For all other non purchased content (your own CDs etc), check out the instructions/suggestions here.
Music from iPod to computer (using option 2). This a manual method using "hidden folders" and although it works, it is a little more involved than other methods.
Much easier ways are to use one of the many 3rd party programs that copy music from the iPod to the computer.
One of the most recommended is Yamipod. This is a free program that transfers music from iPod back to the computer. However, it does not transfer playcounts/ratings etc.
Other free programs are Pod Player, SharePod and Floola.
If you want to recover just the structure of playlists from the iPod (and not the actual song files themselves), there's iRepo for Windows. which I understand has this feature along with all the standard features for these programs.
iPodRip also has the feature enabling you to reconstruct playlists.
There is also CopyTrans. This does preserve ratings/playcounts etc if those are important to you but this program is not free. It also supports video transfer.

Upgraded to v4.5, how to go back to old version?

Hi,
I upgraded my Blackberry Curve 8320 - T-Mobile to v4.5 and I want to remove it and go back to the old version that the phone came with. How?
Thankyou.

Use JL_cmder to wipe your device OS. Click this link for details.
Then install the OS in your PC that you want to have in your device.
tanzim
If your query is resolved then please click on “Accept as Solution”
Click on the LIKE on the bottom right if the post deserves credit

How to get back my old version of Adobe Acrobat

How do I get my old Adobe Acrobat back. It worked great for what little I use it. I was updated to Acrobat XI Pro 11.0.04 and do not need that complex of software for just Creating a PDF file and being able to print a copy when I need it. Now if I try to print anything out of Word I am told my trial is over and if I want anything printed from word I have to buy the new acrobat. Why did is get rid of my old version which I got in school?

It should not have gotten rid of the old version. First try uninstalling the new version and see if the old version comes out of hiding.
If you need to reinstall the older version, you might be able to find it at the site linked below, but you will need to have the serial number for it to activate it to full use.
http://prodesigntools.com/tag/ddl

Apple you wrecked Final Cut X- How to go back to previous version?

Dear Apple Final Cut Developers,
This latest version of Final Cut X 10.1.1 is a disaster. It is riddled with bugs, it crashes, and is slow. It is not ready for production.
Let me start by saying that I loved this product and we have cut over 25 half hour weekly television shows with it. After coming back from the holidays I was horrified to find out that my systems had automatically upgraded and that you had completely revamped the file system to libraries. Not a good move in a production enviroment. But worst is that this upgrade is riddled with bugs. I am constantly having to wait on the system before I can start scrubbing, the audio gets out of sync, and every time I have to go back to a previous show for a clip on another drive I have to wait 5 minutes for the system to load tons of media that I don't need. This kind of buggy product just doesn't work in a production enviroment!!!
Please tell me how I can go back and load the previous version to use until you can get this fixed??
Note that I am editing on a maxed out iMac with 32GB of RAM and the 3.2GHX Core i5 with the latest operating system. This system used to be very fast and editing was a pleasure till you wrecked it.

Sorry to hear this. What have you tried in the way of troubleshooting? Have you tried running from a new user account ?
This really isn't the best place to reach out to Apple. It's a user-to-user forum. A very long shot, but you could contact an Apple retail store and possibly they'll be able to help…but that assumes you didn't update your project and events if you need to work on any of those shows.
For some time, contributors here and other FCP forums have reminded people to follow Apple's best updating practices and archive the pre-update version of the app as well as their projects and events. Absent those archives, there is also the possibility of doing a restore from Time Machine (or some other BU utility), if used.
Best of luck.
Russ

How to get back stolen Ipod Touch?

JUST lost my Ipod touch. well I was at the park..we had "practice" today(dancing) & well I brought my brothers. brother was touching it & left it on top of my bag. there were these 2 girls one was bout my age(12) & one was like probably 9? later brother walked home but I stayed awhile then when I was bout to go home I notice it was gone..had a fear they(the girls) took it but also thought my brother took it. so went walking & brother came & I asked if he had it & he said no. went back & asked instructor & others. I trust they wouldn't take it..so one of an older guy friend looked for it but couldn't find it. Instructor said that if he found it he would keep it til I come again. SO I am pretty sure they took it. I have my tracking device on.

KansasCityGirls is wrong. Apple will not nothing
paa v
- If you previously turned on FIndMyiPod on the iPod in Settings>iCloud and wifi is on and connected go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone. If the iPod has been restored it will never show up.
- You can also wipe/erase the iPod and have the iPod play a sound via iCloud.
- If not shown, then you will have to use the old fashioned way, like if you lost a wallet or purse.
- Change the passwords for all accounts used on the iPod and report to police
- There is no way to prevent someone from restoring the iPod (it erases it) using it.
- Apple will do nothing without a court order
Reporting a lost or stolen Apple product
- iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number

How to revert back to previous version of Internet Explorer (Windows 7)

Hi,
I recently ran updates on my computer and IE 7 was taken up to IE 9. I had CCTV plugins that dont work with IE 9 (I find out too late) so now I want to revert to IE 7 or IE 8. No download that I can find for either IE 7 or IE 8 will run on Windows 7. Both
throw up a library error. Can anyone suggest a solution please. My Windows 7 Ultimate had IE 7 intalled from the box - so it will obviously run. I can remove IE 9 for the Control Panel - but that is about it. I don't belive that the only option would be to
completely reinstall Windows to slove the issue - and would it even activate a second time?

IE9 IS the problem. We have three DVR camera systems which cannot be accessed through IE9. The DVR manufacturer admits the problem!
So explain exactly what it is about IE9 that makes it unable to access the DVR camera systems?
Provide detail of exactly why IE9 is the problem.
Looks like you are really a newbie about using browsers who is just learning how to use IE.Its weird that you are expecting Batteryjer will be knowing the exact root cause problem. FYI I've the same issue but in different context.
I'm using Pega PRPC which was working fine with Internet Explorer 7 and 8. But with the latest update of Internet Explorer 11 (which happened automatically without my knowledge), I'm not able to use this pega software properly as many menu items doesn't
show up.When I play around with F12 Developer Tools (located in Tools) and change the Interent Explorer version from 11 to 8, 7, most of the menu options of Pega appears correctly in browser screen. If you really want to know the exact cause , go back
to your computer and try to play and learn..
I can say that IE is becoming more carp and crap with every update and there is PROBLEM WITH INTERNET EXPLORER with every update.Still I want to rollback my IE from 11 to 8 without using Developer Tool.

How do I back up ipod nano 1st generation iTunes 11

Hi,
I have my bro-in-laws old ipod nano 1st gerneation. I need to back it up to my itunes 11. It doesnt seem to let me do it. I'm sure my old itunes used to just backup a device as I plugged it in.
Thanks,

Recovering your iTunes library from your iPod or iOS device
https://discussions.apple.com/docs/DOC-3991

How to go back to iPod version 1.1

Similar Messages

Maybe you are looking for