How to go from 14.0.7015.1000 to 14.0.7102.5004?

Related to
http://social.technet.microsoft.com/Forums/sharepoint/en-US/2ce0770e-dbb8-47db-b6b1-6a58729732bf/hotfix-kb2817527-the-expected-version-of-the-product-was-not-found-on-the-system?forum=sharepointadminprevious
I've since installed SP2 (oserversp2010-kb2687453-fullfile-x64-en-us.exe) on the server. I've again tried to install ubersrv2010-kb2817527-fullfile-x64-glb.exe, but still getting "The expected version of the product was not found on the system."
Any further suggestions/instruction?
Thanks,
Scott

As far as i know, it can't be done. See Todd Klindt's post here:
http://www.toddklindt.com/blog/Regressions/June2013CU.aspx

Similar Messages

HOW TO DISCONNECT FROM THE INTERNET WHEN TRAVELING INTERNATIONAL

HELLO EVERY ONE.I RECENTLY TRAVELED TO CANADA,WHEN I RETURNED BACK HOME I RECIEVED AN $1800 CELL PHONE BILL,$1000 OF THE BILL WAS INTERNET USAGE,I ADD AN INTERNATIONAL FEATURE BEFORE I LEFT BUT IT WAS LIMITED (HOW DO YOU CHECK HOW MUCH USAGE YOU HAVE USED WHILE BROWSING).SO I ASKED AT&T/A GUY IN THE APPLE STORE,BUT NO ONE REALLY KNOW HOW TO DISCONNECT FROM THE INTERNET AFTER USING IT,WHEN TRAVELING INTERNATIONAL.(MY TREO HAD AN OPTION THAT ASKED DO YOU WANT TO DISCONNECT FROM THE INTERNET)(THE IPHONE DON'T)

If you have upgraded to version 1.1.1 or later there is a switch to disable cellular data while roaming. By default it is set to disable data. Settings/General/Network Data Roaming.
You can monitor cellular data usage in Settings/Usage. Reset it just before traveling.

How to migrate from exchange 2007 to 2013 step by step tutorials please

Hi
I am running Windows Server 2008 standard, with exchange 2007 SP2 on it.
We have 800 mailbox in total
Our domain controllers are
Win2012 R2 and I would like to upgrade to Exchange 2013 on Windows server 2012 R2.
I am running a VM, on VMware environment, so my Windows 2012 R2 is a VM.
Is there a website or document that explains in detail, step by step how to upgrade from 2007 to 2013.
I currently only have 1 exchange server 2007, with all the roles on the one server. I would like to keep that same as
well with exchange 2013.
Thanks

Exchange server deployment assistant is always a good service provider to achieve this task as it simply ask few questions about your current environment and proceed further accordingly.
You can refer to this blog explained by technet team that will assist you further to gather more information in depth : http://blogs.technet.com/b/meamcs/archive/2013/07/25/part-1-step-by-step-exchange-2007-to-2013-migration.aspx
Moreover, to avoid the interruptions and proceed a hassle-free migration from exchange 2007 to 2013, this application (http://www.exchangemigrationtool.com/) could also be a good approach to accomplish
migration task in more secure way.

Does anyone know how to upgrade from 4.1 to 4.3 ios?

After being tricked by the fast talking smoothy helper at Apple store in London to buy a micky mouse ipodtouch (fourth generation) two years ago I am stuck at ios 4.1 and find that all the useful applications need 4.3 or more. So I went to the trouble of letting the macbook stay open all night to load yet another micky mouse version of itunes so that I can upload the more recent version of ios and now (since I don't want to continually have a lot of rubbish on the ipod I disabled the automatic sync "feature") I can only go round in circles whereby the only real possibility left is to turn on the autosync feature. I have had messages like "your ipod will be completely erased if you proceed" and "do you wish to fiddle another few days with this nasty system, then click on continue" and so on.
Does anyone know how to upgrade from 4.1 to 4.3 ios?
That would be great (maybe) because otherwise I will toss this children's waste product on the floor and set up my HD camera to show how easy it is to smash the brightly lit screen into pieces and relieve myself of trash which Apple sell to unsuspecting gullible humans who believe that they are not being tricked by such a nice company who produce shiny colourful gadgets which only work for a month or two before becoming 100% obsolete.
Great to hear from those who have wasted many months of their lives and discovered how to trick the system into doing a simple update operation!
I am insulted by the tricks that fool many and that apple pretend are "necessary".
Germany 2014 01 11 16 19 27

Illaass, your help is amazing - miles better than anyone working in this part of the world who is paid - and you do this for free - because, like me, you LOVE to help people!
BUT, as I said above -
1. There is nothing "mobile" under Application Support. For whatever reason.
2. Devious - that Apple has set up iPod to not show in Finder - a red herring and sign that corruption is visible.
I will try iFunBox next and it sounds like they provide this for the more serious users but use a trivial name to excuse further strangeness.
After
There are purchased items on the iPod that have not been transferred to your iTunes library. You should transfer these items to your iTunes library before updating the iPod. Are you sure you want to continue?
I get
Updating to iOS 6.1.5 will backup and restore the apps, media, contacts, notes, and settings on your iPod touch.
Please do not interrupt the update, which may take an hour or longer to complete.
Cancel          Update
And then I wait for hours to arrive at the above mentioned
Backing up iPod   \\\\\\\\\\\\\\\\\\\\\\\\\ Stop
and then as above
An error occurred while backing up this iPod (0xE8000084). Would you like to continue to update this iPod?
Continuing will result in the loss of all contents on this iPod.
Cancel                Continue
and so we are back to where we always land - the user is left in the Apple designed sabotage situation which annoyed me so much initially.
"Most users will give up at this point, loose all the data or buy yet another disposable from Apple. Less than 3% will work their way to this site and 90% of the 3% will leave the iPod to gather dust in the hope that someone will help later. In all, Apple gains, since people blame themselves for "mistakes" which Apple programmed to throw out users who do not take the 100% Apple path. But Illaass and myself still play the game of "trying to fix" something which Apple don't allow." was the comment which I was going to write but decided against it, adding no value to the conversation other than explaining one reality which we all hoped could be wrong but which I thought to have a very high chance of being closer to the truth.
Apologies for my doubts towards the integrity of the creators.
2014 01 13 12 11 58 17
Recheck: Under Application Support "mobilesync" folder has appeared (MobileMeSyncClient has also appeared [while again trying to update iPod] with zero size) - Good news, a Backup file is there, but it is only 3GB while my iPod has 32GB and is close to full (800MB free space).
Latest at
2014 01 13 12 09 22
The iPod could not be restored. An unknown error occurred (9).
More Infomation    OK
So it looks like I may have lost all the important pictures documenting various items all around Europe for the last two years - luckily I moved a year ago from the iPod toy camera to a Panasonic real camera with SD card which can be read on any computer. Hence important items lost may only be older than one year rather than the most recent items.
Glad I have changed to Panasonic since they don't try to screw you when you don't use their system.
I will now check the "more information" rather than just click on "OK" since I am of the 3% who "don't accept cr*p".
For full information I quote that the iPod now shows a screen with a USB ikon, an upward arrow and an iTunes ikon (all micky mouse language which reduces transparant, clear and technical discussion and thus covers the trail of "where things went wrong").
The iPod is still attached to the computer but the above MMTALK may mean that the iPod should be attached via USB to the mac. I record much of this activity on Video to be able to later prove EXACTLY what occurred, rather than having to rely on screenshots and opinions. We are after all dealing with important items which may later be required to be shown in court, as evidence against fraudsters.
The "More Information" link leads to
Resolve iOS update and restore errors in iTunes
which I have already seen before.
I clicked on OK and a help screen (unnamed as ever because no one like myself demanded that the help screens be named for later discussion) arrived:
You can help Apple improve its products a
while copying this into this message the computer began to start up Final Cut Pro and this was cancelled, then iTunes came up with a message:
iTunes has detected an iPod in recovery mode. You must restore this iPod before it can be used with iTunes.
ok
And I presume the earlier message about helping Apple is gone because I keep getting interrupted by this message called
iTunes has detected an iPod in recovery mode. You must restore this iPod before it can be used with iTunes.
ok
it has appeared now at least six times interferring with anything else I do. Each time I try to write, this message appears and blocks, but only when I write. I tried to do a carriage return and the message appeared taking the carriage return as acceptance of the OK in the
iTunes has detected an iPod in recovery mode. You must restore this iPod before it can be used with iTunes.
ok
Message. But since I have not removed the USB and keep returning to this message I am able to write for a few seconds (now 30 seconds or more) and the message remains on the screen but not blocking this conversation. It appears to be random but in fact as you can later see from the video, it is not reappearing each periodic number of seconds but as I reach a new comment.
I will try to close iTunes so that this can be stopped (I clicked on OK and it appeared another few times, each time I clicked on ok and now it has left me in peace to write here although iTunes is still not yet closed).
Difficult to log down all the strange behaviour but I think you can get the gist of what is going on.
2014 01 12 12 49 27
Should I remove the iPod and stop iTunes? I have a nasty feeling turning to indifference since I have video footage which will verify all the above in a court of law if later required. The truth must always win over any devious attempts at forcing people to do things they don't want to ;-)
2014 01 13 13 03 48

1) How to Boot from SAN for T4-1 Server with Solaris 11.1 OS on the disk? 2) How to SMI Label/Format a disk while OS Installation in Solaris 11.1?

FYI....boot from SAN is required for physical server (T4-1) (not OVM).
1) How to Boot from SAN for T4-1 Server with Solaris 11.1 OS on the disk?
The SAN disks allocated are visible in ok prompt. below is the output.
(0) ok show—disks
a) /pci@400/pci@2/pci@0/pci@f/pci@0/usb@0, 2/hub@2/hub@3/storage@2/disk
b) /pci@400/pci@2/pci@0/pci€a/SUNW, ezalxs@0, l/fp@0, 0/disk
e) /pci@400/pci@2/pci@0/pci@a/SUNW, ealxs@0/fp@0, 0/disk
d) /pci@400/pci@2/pci@0/pci@8/SUNW, emlxs@0, l/fp@0, 0/disk
e) /pci@400/pci@2/pci@0/pci@8/SUNW,enlxs@0/fp@0,0/disk
f) /pci@400/pci@2/pci@0/pci@4/scsi@0/disk
g) /pci@400/pci@1/pci@0/pci@4/scsi@0/disk
h) /iscsi—hba/disk
q) NO SELECTION
valid choice: a. . .h, q to quit c
/pci@400/pci@2/pci@0/pci@a/SUNW, ealxs@0/fp@0, 0/disk has been selected.
Type “Y ( Control—Y ) to insert it in the command line.
e.g. ok nvalias mydev “Y
for creating devalias mydev for /pci@400/pci@2/pci@0/pci@a/SUNW,emlxs@0/fp@0,0/disk
(0) ok set—sfs—boot
set—sfs—boot ?
We tried selecting a disk and applying sfs-boot at ok prompt.
Can you please help me providing detailed pre-requesites/steps/procedure to implement this and to start boot from SAN.
2) How to SMI Label/Format a disk while OS Installation in Solaris 11.1?
As we know that ZFS is the default filesystem in Solaris 11.
We have seen in the Oracle documentation that for rpool below are recommended:
- A disk that is intended for a ZFS root pool must be created with an SMI label, not an EFI label.
- Create root pools with slices by using the s* identifier.
- ZFS applies an EFI label when you create a storage pool with whole disks.
- In general, you should create a disk slice with the bulk of disk space in slice 0.
I have seen the solution that using format -e, we change the labelling but all the data will be lost, whats the way to apply a SMI Label/Format on a rpool disks while OS Installation itself.
Please provide me the steps to SMI Label a disk while installaing Solaris 11.1 OS.

Oracle recommends below things on rpool: (thats reason wanted to apply SMI Label)
I have seen in the Oracle documentation that for rpool below are recommended:
- A disk that is intended for a ZFS root pool must be created with an SMI label, not an EFI label.
- Create root pools with slices by using the s* identifier.
- ZFS applies an EFI label when you create a storage pool with whole disks.
- In general, you should create a disk slice with the bulk of disk space in slice 0.

How to out from infinite while loop in sub VI

Dear Sir,
how to out from infinite while loop in sub VI from main VI
attached photo for solution but I can't understand it and i can't find the function in photo
please help
Attachments:
stop_subVI_frm_main.JPG ‏36 KB

Asking how to get out of an infinite loop is like asking how to find the end of a circle. I'm not trying to be sarcastic but by definition, if there is a way out of the loop, then it is not infinite. I think what you are asking is how to avoid creating an infinite loop. Is there something about the suggestions you have been given that you do not like? My favorite suggestion is the notifier but maybe you just need an example. Turn on context help and read about the notifier functions in the code below.
This is your top level VI
And this is your subVI
If this seems too complex then a global variable will work too. But what seems simpler can cause much more complex bugs. You can code fast and spend lots of time debugging or you can code slow and spend less time debugging. Personally I perfer writing productive code than looking for bugs any time.
=====================
LabVIEW 2012

How to convert from Grayscale to single color channel

I hope that someone here might be able to help. I am writing an application which loads in color channels separately, to be merged by the application The images are multi-page TIFF files. The trouble that I am running into is that the application loads the images into grayscale, so when I merge the channels, they are merged as grayscale, not as the correct colors.
I use the following on each color channel to load them in:
public static BufferedImage[] loadTiff(File multiPageFile, int colour) {
    BufferedImage[] img = null;
    ArrayList<BufferedImage> tmp = new ArrayList<BufferedImage>();
    try {
        SeekableStream stream = new FileSeekableStream(multiPageFile);
        String[] names = ImageCodec.getDecoderNames(stream);
        ImageDecoder dec = ImageCodec.createImageDecoder(names[0], stream, null);
        int numPages = dec.getNumPages();
        for (int i=0; i<numPages; i++) {
         try {
                RenderedImage im = dec.decodeAsRenderedImage(i);
                BufferedImage bi = PlanarImage.wrapRenderedImage(im).getAsBufferedImage();
          //In case not all pages are valid images, we use ArrayList as it is dynamic
          tmp.add(bi);
            }catch (RuntimeException re) {
          //Once the exception is caught, we can decode the layer here for whatever means.
    }catch (FileNotFoundException fnfe) {
        System.err.println("File not found.");
        fnfe.printStackTrace();
    }catch (Exception e) {
        System.err.println("General Exception caught");
        e.printStackTrace();
    //Convert to an array to be returned.
    img = new BufferedImage[tmp.size()];
    for (int i=0; i<img.length; i++) {
        img[i] = tmp.get(i);
    return img;
}So a BufferedImage array is returned (one element in the array for each page in the multi-page file). Before I return the BufferedImage array, though, it would be good to convert it to the correct color. I know which channel is currently being loaded. Does anyone have any tips on how to shift from a grayscale intensity to a single color intensity? I have tried a number of things regarding byte shifting, but I am really none the wiser.
I have tried, for example, reading the int color value:
int color = bi.getRGB(w,h);The trouble is that this number is not in the region 0..255, so I don't know how I can use it. If I shift the number:
color = color>>16I get a number smaller than 255 (although it seems to be negative), but I don't know whether I can use this value for a single color channel, i.e. if the current color is red, saying:
Color redC = new Color(color, 0, 0);
bi.setRGB(w,h,redC); //Slow and inefficient. There must be a better way.When I try doing that, I end up with nothing drawn or visible.
Does anyone have any ideas? Thanks in advance.
Edited by: doughnuts64 on Jun 12, 2008 6:27 AM

Thanks for the response. It has been helpful in getting my problem sorted. I was not creating a new BufferedImage - I was just using the one that had been loaded in, and as such had not realised that the type was not TYPE_INT_RGB. As soon as I instantiated a new BufferedImage of the same dimensions and colour TYPE_INT_RGB as you suggested, it worked! So thanks for that.
Whilst that does work, it does slow the application incredibly as it has so much data to cycle through. Ideally, I would be able to load the image in directly as the colour channel in question, rather than loading in as grayscale. This way, the application would only require the amount of time needed to load in the images, not to process them on a pixel-by-pixel basis (typical images are made up of over 16,000,000 pixels for each colour channel, and we typically load two files in at once - both for separate colour channels, so over 32,000,000 pixels to process).
As I am loading in multi-page tiff files, I am having to use the JAI (Java Advanced Imaging) toolkit. I use the following code to load in my multi-page tiff into a BufferedImage array, where each element of the array represents one of the 'pages' in the multi-page tiff file:
SeekableStream stream = new FileSeekableStream(multiPageFile);
String[] names = ImageCodec.getDecoderNames(stream);
ImageDecoder dec = ImageCodec.createImageDecoder(names[0], stream, null);
int numPages = dec.getNumPages();
BufferedImage[] finalImage = new BufferedImage[numPages];
for (int i=0; i<numPages; i++) {
     RenderedImage im = dec.decodeAsRenderedImage(i);
     finalImage[i] = PlanarImage.wrapRenderedImage(im).getAsBufferedImage();
     //...colour changing code currently here - loops through finalImage array, and on every pixel of every layer
...To be able to automatically convert the colour channel without having to loop on every pixel (and thus save an incredible amount of loading time) would be helpful.
Thanks.

I see people from different ages at my work and every month I need to count how many people from each age I've seen that month. How can I do to give the entries to numbers in a single cell and make numbers count them for me?

I see people from different ages at my work and every month I need to count how many people from each age I've seen that month. How can I do to give the entries to numbers in a single cell and make numbers count them for me? The final result would be a spreadsheet telling there were 8 people from 20 to 39 years old, 14 peolple from 40 to 59 and so on...

jpqcampos wrote:
This appears to be an 'input form' using 'Radio Buttons' to select the category. Neither of these features are supported in Numbers '09.
You can input the data on one table and summarize it on a second table, but the input table will continue to hold data for each event.
And by using the Reorganize button, you can hide all but two rows of that table to approximate the appearance and performance of an input form.
Here are the two tables, Data on the left and Summary on the right. Notes below.
The grey-filled columns in both tables are 'working' columns, and may be hidden (as shown in the image below).
Data table:
D1 contains the word "TRUE" (in capital letters). (This row is always shown.)
D2 is empty, or may contain any value except "TRUE" (This row is always hidden under the Reorganize rule.)The rest of Row 2 of this table requires the data shown: a number outside the range to be counted (999), and two checkboxes, both checked.
D3 (and filled down the rest of column D): =AND(OR(B2,C2),NOT(OR(B3,C3)))
The formula returns TRUE only for the first unused row in the table (ie. the first row for which neither checkbox has been checked)
Summary table:
Column A contains labels for the age ranges to be counted.
Column B contains the same information in the form necessary for the formulas in columns C and D. They need a numeric value, and that value must be the largest acceptable value in the range to be counted.
C2 (and filled right to column D, then both filled down to row 5):
=COUNTIFS(Data :: $A,"<="&$B,Data :: B,TRUE)-SUM(C$1:C1)
Two changes from the previous example:
COUNTIFS is used to separate the Native and Foreign counts as well as the age range to be counted.
The amount subtracted from each result is the SUM of the earlier results, and includes the text value in the first cell of the column (which is interpreted by SUM as a zero).
See note below regarding my earlier formula.
When the greyed columns are hidden and the checkbox in the Reorganize pane is checked, the two tables will appear as shown below:
Close the reorganize pane, and the 'data entry form' is ready to use.
To use, enter the age first, then check one of the boxes.
As soon as one box is checked, the row will be hidden, and the next (unused) row will be shown.
Regards,
Barry
Note regarding formula in my earlier post:
The earlier formula will give erroneous results as it subtracts only the count directly above it from its count of persons in the age range 0-n.
In E2 of that table, replace "-E1" with "-SUM(E1:E$1)
Fill down to E8.
Ignore the instructions (in that post) following "Fill down to E8."
B

How to print from iPhone 3GS with OS 4.2.1?

Hello,
I have searched and read through the discussion forums, but I'm not sure I understand how to print from my iPhone.
In reading the manual for the iPhone 3GS, specifically on page 44, it says the following:
AirPrint uses your Wi-Fi network to send print jobs wirelessly to your printer. iPhone must be connected to the same wireless network as the AirPrint printer.
My HP printer (Officejet Pro L7555) is plugged into my Airport Express so that I can do wireless printing. (I am also using an Airport Extreme for the WiFi network in my house).
When I have, for example, an email on my iPhone that I am reading, if I tap the "reply" button, I do see the "Print" option appear. When I tap on "Print", it brings up a screen where it says, "Select Printer". I then tap on that, and it will then say, "Looking for Printers".
The final outcome is "No Printers Found".
Since I am following the instructions on wireless printing as found on page 44 of the iPhone 3GS handbook (with OS 4.2.1 software), I'm not sure what it is that I'm doing wrong. I can print wirelessly with my iMac and my MacBook Pro to my HP printer just fine. Everything in my home is on the same network (my iPhone, iMac, iTouch, and MacBook Pro) that the printer is on.
I'm sure I'm missing a big chunk of the puzzle somewhere that the manual is missing. Can someone please let me know what additional steps I must take in order to print from my iPhone 3GS while I am at home on my own network?
Thank you very much.

From one Andy to another Andy (LOL):
Okay, thank you for the information. I even searched the Store web page before asking my question, and somehow missed this.
Well, I'm not about to go and buy ANOTHER Apple toy just to print from my iPhone. For now, I think I can stick to the old-fashioned way and just forward it to myself so that I can print it from the iMac. I just got Apple TV a few days ago, so I'll have to wait a little bit for the next toy.
Thank you very much for the prompt answer.
Andy Smith
Pleasanton, CA

How to print from the ipad 2?

Can anyone tell me how I can print from the Ipad 2?

How to print from iPad 2
1. Buy a AirPrint enabled printer; see list below
http://support.apple.com/kb/ht4356
2. Run the CD provided and setup as network printer; this will setup your printer to the same network as your iPad
http://i1224.photobucket.com/albums/ee374/Diavonex/1a30ee42.jpg
3. Start printing from your iPad without wire
http://i1224.photobucket.com/albums/ee374/Diavonex/93ec77e5.jpg

Anyone know how to print from Win2K or WinXP to shared printer on iMac?

Help! Anyone know how to print from Win2K or WinXP to shared printer on iMac? I have a new IMac hosting a Canon iP4300, a pc running W2K & a pc running WXPsp2. All computers recognize each other and the iP4300 on the network and can share files. All Mac "Windows Sharing" & "Printer Sharing" preferences sre set correctly. Apple says the printer must be configured on the Windows computers as an SMB/CIFS network printer using a Postscript driver. I can find lots of pages on the net telling me I what needs to be done, but nothing stating how to do it. All the info I've found is either overly simplistic and or relates to the 10th dang of enterprise server administration. Would VERy much appreciate any help at all.
Victor

Please search the discussions before posting. This question has been asked many times before and you could save yourself time.
http://www.ifelix.co.uk/tech/3012.html

How to print from iPad mini to a Cacon imagePrint MF4880dw

Just bought this Canon all-in-one, and after installing it, found that was not compatible with air print. There seem to be several possible solutions to print to it from my iPad mini. What do the experts feel is the best way to print documents?

How to Print from Your iPad: Summary of Printer and Printing Options
http://ipadacademy.com/2012/03/how-to-print-from-your-ipad-summary-of-printer-an d-printing-options
How to Print from Your iPad
http://www.dummies.com/how-to/content/how-to-print-from-your-ipad.html
How do you print directly from the iPad
http://www.everymac.com/systems/apple/ipad/ipad-faq/how-to-print-documents-direc tly-from-ipad.html
Print from iPad / iPhone without AirPrint
http://ipadhelp.com/ipad-help/print-from-ipad-iphone-without-airprint/
How to Enable AirPrint on a Mac and Use Any Printer
http://ipadhelp.com/ipad-help/how-to-use-airprint-with-any-printer/
iPad Power: How to Print
http://www.macworld.com/article/1160312/ipad_printing.html
Check out these print apps for the iPad.
Print Utility for iPad ($3.99) http://itunes.apple.com/us/app/print-utility-for-ipad/id422858586?mt=8
Print Agent Pro for iPad ($5.99) http://itunes.apple.com/us/app/print-agent-pro-for-ipad/id421782942?mt=8 Print Agent Pro can print to many non-AirPrint and non-wireless printers on your network, even if they are only connected to a Mac or PC via USB.
FingerPrint turns any printer into an AirPrint printer
http://reviews.cnet.com/8301-19512_7-57368414-233/fingerprint-turns-any-printer- into-an-airprint-printer/
Print (Print to ALL Printers) ($1.99)
https://itunes.apple.com/us/app/print-print-to-all-printers/id299423224?mt=8
 Cheers, Tom

How to go from a View Controller to a View Controller

Hey everyone, I have asked this question over on Stack Overflow, and really had no luck with it.
     I am wondering how to go from one (1) View Controller that has buttons and another View Controller that has a UIWebViewer in? I know how to do the simple part to get the two to link up. But, the buttons are going to have different URL's hooked up to them, and I want to be able to reuse the Web Viewer. I am using the Swift Programming language to be able to do this.
below is my current code that is has my buttons sitting on top of my web viewer,
import UIKit
import WebKit
class ViewController: UIViewController {
    @IBOutlet var wbView: UIWebView!
    var strUrl = ""
        @IBAction func buttonAction(sender: UIButton) {
            switch (sender.tag){
            case 1:
                strUrl = "https://www.google.co.in/"
            case 2:
                strUrl = "https://in.yahoo.com/"
            case 3:
                strUrl = "https://www.facebook.com/"
            case 4:
                strUrl = "https://bing.com/"
            default:
                break;
            reloadWebViewWithUrl(strUrl);
        func reloadWebViewWithUrl(strUrl: NSString){
            var url = NSURL(string: strUrl);
            var request = NSURLRequest(URL: url!);
            wbView.loadRequest(request);
        override func viewDidLoad() {
            super.viewDidLoad()
            // Do any additional setup after loading the view, typically from a nib.
        override func didReceiveMemoryWarning() {
            super.didReceiveMemoryWarning()
            // Dispose of any resources that can be recreated.
How should I go about changing this two allow my buttons to be in their own ViewController and still be able to to the secondary View Controller with the WebViewer?
Thank You all in advanced with the help on this!

This is the FirstViewController Code
import UIKit
class FirstViewController: UIViewController {
    @IBAction func webAction(sender: UIButton) {
        let index = sender.tag
        chosenURLString = addresses[index]
        performSegueWithIdentifier("WebViewSegue", sender: self)
    override func prepareForSegue(segue: UIStoryboardSegue, sender: AnyObject?) {
        if let controller = segue.destinationViewController as?
            SecondViewController {
            controller.urlString = chosenURLString
            chosenURLString = nil
    private let addresses = ["", "https://www.google.com", "https://www.facebook.com", "https://spca.org", "https://www.facebook.com/wagzpack?fref=photo"]
    private var chosenURLString: String?
This is the SecondViewController Code
import UIKit
class SecondViewController: UIViewController {
    @IBOutlet var webSite: UIWebView!
    var urlString: String?
    override func viewDidLoad() {
        super.viewDidLoad()
        if let urlString = urlString {
            if let url = NSURL(string: urlString) {
                let request = NSURLRequest(URL: url)
                webSite.loadRequest(request)
                println("loading \(urlString)")
            else {
                println("badly formed URL string.")
        else {
            println("missing URL string.")

How to navigate from a view to an IView in portal

Hi all,
Onclick of an application in my portal my appliaction gets opened.But the problem here is onclick of cancel in my applcation i want to navigate to my IView in portal.
For navigation between view2 to view1 i used wdThis.wdFirePlugtoView1();
by creating a navigation link.
How to navigate from view1 to Portal IView
Regards
Padma N

Hi padma,
Go to Iview Property in portal Content managment and take the PCD location.
It may look something like this
ROLES:portal_content/ZABC/ZPROJECTS/com.abc.ZPortfolio/com.abc.ZPortfolio/com.abc.ZRoles/com.abc.ZPortfolioReconle/com.chep.ZReconciliation/com.chep.ZReconEnquiry_IView
Create a string variable with the PCD location
String pcdLocation = <pcd location>
And call using the iview using the following code
WDPortalNavigation.navigateAbsolute(pcdLocation, WDPortalNavigationMode.SHOW_INPLACE, WDPortalNavigationHistoryMode.NO_DUPLICATIONS,"&reference="+reference);
Here &reference is the application parameter, if the application with which the iView is created has parameter and is not mandatory.
Hope this helps.

Since you can no longer backup to disk, how to restore from external drive without losing all ratings and playlists

since you can no longer backup to disk, how to restore from external drive without losing all ratings and playlists?

My own opinion is that you should install the later appropriate version of Silverkeeper. That said, I would in fact recommend if you can wait a few days for an answer, that you email the La Cie Silverkeeper backup team via the email link on the site at http://www.lacie.com/silverkeeper/
They are careful to say they are not officially providing a backup service, but when I emailed them with a query regarding usage about a year ago after downloading Silverkeeper for myself, I got a reply within a couple of days that cleared up my question.

How to go from 14.0.7015.1000 to 14.0.7102.5004?

Similar Messages

Maybe you are looking for