How to go further with my 9950BE on my K9A2 platinum MB?

Hi, i have upped the multiplier to 15 and running 3.0Ghz at stock voltage stable in OCCT.
Also, rams have been clocked at 1066Mhz stable in memtest86.
these are the only settings i have done.
What else can i do to squeeze more juice out of my rig? would anyone teach me please!?
below is a screenshot of my ram settings

Though i dont have the same processor as you, i can say that the performance reacts very good to tRAS ,tRC modifications as well as tightening tRRD, tWR , tWTR, tRTP .
Keep in mind also that tRC=tRP+tRAS and tRAS=tCL+tRCD+tRP .
Edit:Using Everest ,CPU-Z and SIsoftware you can identify this timings values and their maximum, for each supported frequency so you can test them.
In my rig i could get the same gain (obtained from those timings tweaks ) by overclocking the HTT and thus the memory clocks with less stability problems. So take into consideration to only clock a little the HTT and readjust the CPU Multiplier to keep it in specs overall.

Similar Messages

Sata Ports how to use # 5 and 6 port for storage K9A2 Platinum

This could be a real stupid question , I know port 5 and 6 are controlled by the promise controller. but when I plug something in to these ports nothing happens. Do you need to load the drivers, I really do not want to use raid would just like to plug in hard drives for storage only.
Would appreciate the help

What he said,
enable extra raid controller in Bios,
do not set up raid when you boot, just let it go through it's thing or hit "space bar" and it will skip through the raid setup stuff..
grab your promise drivers from here :
http://global.msi.com.tw/index.php?func=downloaddetail&type=driver&maincat_no=1&prod_no=1332
now that you are there update other drivers as well.
I love that promise controller --> eSata on the back , nice hot swap hard drive port. I use it to do Norton ghost backups. Much faster than through USB-HD. When back ups are done, just unplug it.

How to Compare date with Current system date in XSLT mapping.

Hello Experts
In a XSLT mapping program, I hava a filed, ZZOB which is giving some date.
which I need to compare with the current date.
Condition-
ZZOB is greater than current date or ZZOBLIG = NULL
Then go further statements.
how can i campare with the current date?
Please help.
Thanks
Balaprasad

This example may help:
<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
version="1.0">
<xsl:param name="currentDate"/>
    <xsl:variable name="firstDate" select="concat(substring($currentDate, 1,4),substring($currentDate, 6,2),substring($currentDate, 9,2))"/>
    <xsl:template match="/">
        <xsl:apply-templates select="//item"/>
    </xsl:template>
    <xsl:template match="item">
        <xsl:variable name="secondDate" select="concat(substring(submissionDeadline, 1,4),substring(submissionDeadline, 6,2),substring(submissionDeadline, 9,2))"/>
        <xsl:choose>
        <xsl:when test="$firstDate > $secondDate">
            <xsl:call-template name="late"/>
            </xsl:when>
            <xsl:when test="$firstDate < $secondDate">
                <xsl:call-template name="ontime"/>
            </xsl:when>
            <xsl:when test="$firstDate = $secondDate">
                <xsl:call-template name="same"/>
            </xsl:when>
            <xsl:otherwise>Monkeys<br /></xsl:otherwise>
        </xsl:choose>
    </xsl:template>
    <xsl:template name="ontime">
        This is on time
    </xsl:template>
    <xsl:template name="late">
        This is late
    </xsl:template>
    <xsl:template name="same">
        This is on time
    </xsl:template>
</xsl:stylesheet>

How to proceed further once the explain plan and trace files are generated?

Hi Friends,
I need to improve the performance of on of the views that i am working on.
As suggested in the thread - http://forums.oracle.com/forums/thread.jspa?threadID=863295&tstart=0 , i gave generated the explain plan and the trace file.
From the explain plan, we can see the expensive operations for the query.
Can any one please tell, how to proceed further from here on i.e. how to make this expensive operations less expensive?
For ex: FULL TABLE SCAN might be an expensive operation when the table has indexes.In such cases, how can we avoid such operations to make query faster?
Regards,
Sreekanth Munagala.

Hi Veena,
An earlier post by you regarding P45 is as below
Starter report P45(3) / P46 efiling for UK
from my understanding though i have not worked on GB Payroll you have said that you deleted IT 65 details of leaver,however there must be clusters generated in system from where the earlier data needs to be deleted and may be that is why you are facing the issue.
In Indian payroll when we execute text file for efiling of tax after challan mapping all the data compiles and sits in PCL cluster and therefore we are unable to generate form 16 with proper output,here we delete the clusters and rerun again the mappings and then check form 16.
Hope this might help you,Experts have suggested you earlier also,they may correct me for this.
Salil

How do I start with a circular blank space to be filled with text/pic?

How do I start with a circular blank space to be filled with text/pic? All info I can find relates to rectangular shapes.Max

Many thanks
Max Emmons
Date: Sat, 8 Jun 2013 09:30:22 -0700
From: [email protected]
To: [email protected]
Subject: How do I start with a circular blank space to be filled with text/pic?
    Re: How do I start with a circular blank space to be filled with text/pic?
    created by hatstead in Photoshop Elements - View the full discussion
Max,
Open your picture fileAccess the cookie cutter tool in the toolbox. On the tool's option bar, click on the fly-out for the crop shapes. Select the circular shape (it's all black). Hold down the shift key on the keyboard and drag out the circle to embrace what you wish to retain. You can drag the circle to adjust further, then crop.
To add text, get the type tool and type the text. This will be on a separate layer. Note that there are areas of transparency (checkerboard pattern) outside the circlular area.
Use the Paintbucket tool to fill these areas. The tool uses the foreground color.
Another option would be to place a layer below the circle layer and fill it with a pattern or whatever you want.
Feel free to repost if this is not clear.
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5390309#5390309
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5390309#5390309
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5390309#5390309. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Photoshop Elements by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Need an example how to use SCAN_Start with a callback function

I would appreciate if someone helps me with a working example of how to use SCAN_Start with a callback function. I need just a basic functionality: to specify a channel list (with gains probably), to start a data acquisition task and to receive data buffers utilizing a callback function. t this time whatever I was trying to do caused computer hangups, though it is supposed to be one of the most regular tasks to perform.
Thank you in advance,
Mike

Hello Mike,
Thank you for contacting National Instruments.
Attached is an example project which uses a callback function to begin analog acquisition (AI) by calling SCAN_Start. This project acquires from the first 2 channels on your DAQ device. Make sure to modify the device number in the code to match the number of your card.
Let me know if you have any further questions...
Sincerely,
Sean C.
Applcications Engineer
National Instruments
Attachments:
Acquire_multichannel_61xx.zip ‏11 KB

How to use TreeByKeyTableColumn (with sample code)

Hi Guys,
              Can anyone tell me How to bind data with TreeByKeyTableColumn ? (with sample code). Is it possible to add checkbox with TreeByKeyTableColumn? Kindly aware me further in this regards....
Thanks,
Ravin

Hi
Answering to following question
How to bind data with TreeByKeyTableColumn
Create the Context
Click on the Context tab of the view. Create a node name it as "AIR_LINES". Set the Cardinality as 0...N. Make it a Singleton Node. Give a method name in supply function column by name "GENERATE_TREE".
Then we will create attributes required for the tree column. We require 5 attributes
   1. Attribute which contains the current level of the node. Create an attribute called "NODE_LEVEL" of type STRING.
   2. Attribute which contains the parent level of the node. Create an attribute called "PARENT_LEVEL" of type STRING.
   3. Attribute which contains the contents of the node. Create an attribute called "NODE_CONTENT" of type STRING.
   4. Attribute which contains X or Space depending upon the node is expanded or not. Create an attribute called "EXPANDED" of type WDY_BOOLEAN.
   5. Attribute which contains X or Space depending upon the type of the node, whether the node is a branch or a leaf. Create an attribute called "IS_LEAF" of type WDY_BOOLEAN.
Click on the layout tab of the view. Add UI element of type Table, give the name as 'Tree Table'. Bind the DATASOURCE property of the table to the AIR_LINES node of the view context.
Give heading to the table as "Booking Details".
Right click on table node crated and chose Insert Master Column.
Name it as "TREE_NODE" and chose TreeByKeyTableColumn from the dropdown
Bind the 4 properties with context attributes we have already created.
Expanded -> Expanded.
Is_leaf     -> Is_leaf.
Parent_key -> Parent_level
Row_key   -> Node_level
Give heading to the tree node in the text field.
Insert a cell editor in the tree column and chose the type as Text view.
Bind the text property of the text view to the NODE_CONTENT attribute of the context.
Similarly create a table column to display the second column i.e. Node type.
Right click -> Insert table column -> Give the heading in the text property of the header (Node Type).
Right click -> Insert Cell Editor -> Bind the text property to NODE_TYPE attribute of the context.
Click on the Methods tab of the view. You will find the method of type supply function which we created during the creation of node. Double click and write the following code.
METHOD generate_tree .
Ideally this code must go to a method of a class which will return four internal tables
start of Model code
TYPES : BEGIN OF ty_scarr,        " Air line Table
         carrid TYPE s_carr_id,
        END OF ty_scarr.
TYPES : BEGIN OF ty_spfli,        " Flight Connection Table
         carrid TYPE s_carr_id,
         connid TYPE s_conn_id,
        END OF ty_spfli.
TYPES : BEGIN OF ty_sflight,      " Flight Table
         carrid TYPE s_carr_id,
         connid TYPE s_conn_id,
         fldate TYPE s_date,
        END OF ty_sflight.
TYPES : BEGIN OF ty_sbook,        " Flight Booking Table
         carrid TYPE s_carr_id,
         connid TYPE s_conn_id,
         fldate TYPE s_date,
         bookid TYPE s_book_id,
        END OF ty_sbook.
DATA : lt_scarr TYPE TABLE OF ty_scarr.
DATA : lt_spfli TYPE TABLE OF ty_spfli.
DATA : lt_sflight TYPE TABLE OF ty_sflight.
DATA : lt_sbook TYPE TABLE OF ty_sbook.
DATA : ls_scarr TYPE ty_scarr.
DATA : ls_spfli TYPE ty_spfli.
DATA : ls_sflight TYPE ty_sflight.
DATA : ls_sbook TYPE ty_sbook.
SELECT carrid
FROM scarr
INTO TABLE lt_scarr
UP TO 2 ROWS.
IF lt_scarr[] IS NOT INITIAL.
SELECT carrid connid
    FROM spfli
    INTO TABLE lt_spfli
    FOR ALL ENTRIES IN lt_scarr
    WHERE carrid EQ lt_scarr-carrid.
    IF lt_spfli[] IS NOT INITIAL.
      SELECT carrid connid fldate
        FROM sflight
        INTO TABLE lt_sflight
        FOR ALL ENTRIES IN lt_spfli
        WHERE carrid EQ lt_spfli-carrid
        AND connid EQ lt_spfli-connid.
For an additional level of branching
       IF lt_spfli[] IS NOT INITIAL.
           SELECT carrid connid fldate bookid
             FROM sbook
             INTO TABLE lt_sbook
             FOR ALL ENTRIES IN lt_sflight
             WHERE carrid EQ lt_sflight-carrid
             AND connid EQ lt_sflight-connid
             AND fldate EQ lt_sflight-fldate.
       ENDIF.
    ENDIF.
ENDIF.
End of Model code
Start of code for generation the tree
data declaration
DATA lt_table TYPE wd_this->elements_air_lines.
DATA ls_table LIKE LINE OF lt_table.
DATA lvl1_index TYPE string.
DATA lvl2_index TYPE string.
DATA lvl3_index TYPE string.
DATA lvl4_index TYPE string.
Level 1
LOOP AT lt_scarr INTO ls_scarr.
lvl1_index = sy-tabix.
condense lvl1_index.
create a row
    ls_table-node_level       = lvl1_index.     " 1 st level
    ls_table-parent_level     = ''.             " No parent
    ls_table-node_content     = ls_scarr-carrid.
    ls_table-node_type        = 'Air Line'.
    ls_table-is_leaf          = abap_false.
    INSERT ls_table INTO TABLE lt_table.
    clear ls_table.
Level 2
LOOP AT lt_spfli INTO ls_spfli.
lvl2_index = sy-tabix.
condense lvl2_index.
create a row
    concatenate lvl1_index `.` lvl2_index into ls_table-node_level.
    ls_table-parent_level     = lvl1_index.     " Parent 1 st level
    ls_table-node_content     = ls_spfli-connid.
    ls_table-node_type        = 'Flight Connection'.
    ls_table-is_leaf          = abap_false.
    INSERT ls_table INTO TABLE lt_table.
    clear ls_table.
Level 3
LOOP AT lt_sflight INTO ls_sflight.
lvl3_index = sy-tabix.
condense lvl3_index.
create a row
    concatenate lvl1_index `.` lvl2_index `.` lvl3_index into ls_table-node_level.
    concatenate lvl1_index `.` lvl2_index into ls_table-parent_level.
    ls_table-node_content     = ls_sflight-fldate.
    ls_table-node_type        = 'Flight'.
    ls_table-is_leaf          = abap_true.
    INSERT ls_table INTO TABLE lt_table.
    clear ls_table.
If you want an additional level it can be programmed like this
Level 4
*LOOP AT lt_sbook INTO ls_sbook.
lvl4_index = sy-tabix.
condense lvl4_index.
create a row
   concatenate lvl1_index `.` lvl2_index `.` lvl3_index `.` lvl4_index into ls_table-node_level.
   concatenate lvl1_index `.` lvl2_index `.` lvl3_index into ls_table-parent_level.
   ls_table-node_content     = ls_sbook-bookid.
   ls_table-node_type        = 'Booking'.
   ls_table-is_leaf          = abap_true.      " as its the final level in our hier archy
   INSERT ls_table INTO TABLE lt_table.
ENDLOOP.
ENDLOOP.
ENDLOOP.
ENDLOOP.
bind all the elements
node->bind_table(
    new_items            = lt_table
    set_initial_elements = abap_true ).
ENDMETHOD.

How to unlock iphone4 with the code

how to unlock iphone4 with the code

the page where i will put the codes is not coming up on itunes.
any help further.

How can I print with the black and white cartridge only?

I am trying to print using the black and white cartridge only because magenta is out of ink but I'm getting the following error message in HP Photosmart C7200 series print dialog:
The printer is out of ink.
The following ink cartridges are empty: Magenta. Replace these ink cartridges to resume printing.
How can I print with the black and white cartridge only?
Mac OSX 10.7.3
HP Photosmart C7280 (7200 series)
This question was solved.
View Solution.

I am absolutely disgusted by this; clearly a scam from HP to make more money by selling extra ink cartridges!! I will make sure to never buy any products from the shoddy rip off merchants at HP ever again!!
You should be ashamed!!

Open Hub: How-to doc "How to Extract data with Open Hub to a Logical File"

Hi all,
We are using open hub to download transaction files from infocubes to application server, and would like to have filename which is dynamic based period and year, i.e. period and year of the transaction data to be downloaded.
I understand we could use logical file for this purpose. However we are not sure how to have the period and year to be dynamically derived in filename.
I have read in sdn a number of posted messages on a similar topic and many have suggested a 'How-to' paper titled "How to Extract data with Open Hub to a Logical Filename". However i could not seem to be able to get document from the link given.
Just wonder if anyone has the correct or latest link to the document, or would appreciate if you could share the document with all in sdn if you have a copy.
Many thanks and best regards,
Victoria

Hi,
After creating open hub press F1 in Application server file name text box from the help window there u Click on Maintain 'Client independent file names and file paths' then u will be taken to the Implementation guide screen > click on Cross client maintanance of file name > create a logical file path by clicking on new entiries > after creating logical file path now go to Logical file name definition there give your Logical file , name , physical file (ur file name followed by month or year what ever is applicable (press f1 for more info)) , data format (ASC) , application area (BW) and logical path (choose from F4 selection which u have created first), now goto Assignment of physical path to logical path > give syntax group >physical path is the path u gave at logical file name definition.
however we have created a logical path file name to identify the file by sys date but ur requirement seems to be of dynamic date of tranaction data...may u can achieve this by creating a variable. U can see the help from F1 that would be of much help to u. All the above steps i have explained will help u create a dynamic logical file.
hope this helps u to some extent.
Regards

How to join GRPO with AP invoice thru query ?

hi all,
How to join GRPO with AP invoice in sql query ?
Jeyakanthan

Hi Jeyakanthan
Are you using query in SAP Business One or outside the system? If you select the tables in SAP Business One as OPCH and OPDN then no inner join will appear, as the links sit on the line level. You will need PCH1 and PDN1. The link can be found in both directions, but bear in mind that 1 AP Invoice could be based on more than 1 Goods Receipt PO. For this reason the best approach is to start at the AP Invoice line level and use the BaseType and BaseRef fields to view which lines were pulled from which Goods Receipt PO's.
Kind regards
Peter Juby

How do I work with FK in a data profile?

Hello People:
I am new in OWB tools and I have many doubts. Therefore, I would like to know if anyone can guide me a bit with the theme of FK and profiles.
How do I work with FK in a data profile?
If I have a table that has a FK to most of the tables, because it is like a parent table. What should I do to have that FK in the profile?
e.g.
- Table 1 FK Table 2
- Table 1 FK Table 3
- Table 1 FK Table 4
- Table 1 FK Table 5
- Table 1 FK Table 6
- Table 2 FK Table 7
- Table 2 FK Table 8
- Table 8 FK Table 9
You should have a data profile with each table or a data profile for all related tables?
If I am all in a single profile, that it would have no problem but I would only slow every time that I have to add a new table, but if I got separated, I can not use the FK? What is the solution that will give this problem?
e.g. PROFILE GENERAL
- Table 1
- Table 2
- Table 3
- Table 4
- Table 5
- Table 6
- Table 7
- Table 8
- Table 9
OR
PROFILE 1 -> - Table 1
PROFILE 2 -> - Table 2
PROFILE 3 -> - Table 3
PROFILE 4 -> - Table 4
PROFILE 5 -> - Table 5
PROFILE 6 -> - Table 6
PROFILE 7 -> - Table 7
PROFILE 8 -> - Table 8
PROFILE 9 -> - Table 9
OR
PROFILE R -> Table 1 / Table 2
PROFILE S -> Table 1 / Table 3
PROFILE T -> Table 1 / Table 4
PROFILE U -> Table 1 / Table 5
PROFILE V -> Table 1 / Table 6
PROFILE W -> Table 2 / Table 7
PROFILE X -> Table 2 / Table 8
PROFILE Z -> Table 8 / Table 9
Thank you very much for your help!
Best regard!

Any idea, please?

How to log in with my old Apple account? I forgot my pass and I did change my apple ID before canceling first?? I am from Croatia so did folow al the discussion and the to resolve the problem but no luck. Can not call from Croatia the Apple help desk

How to log in with my old Apple account? I forgot my pass and I did change my apple ID before canceling first?? I am from Croatia so did folow al the discussion and the to resolve the problem but no luck. Can not call from Croatia the Apple help desk.i did try all the options but I can not find the phone number to call from Croatia,
I can not change my Apple ID to the old mail (not possible!)
The old mail don't accept the new password..
I can not delete the Icloud all the time asking my the password of the old mail!
I realy need help

You can not merge accounts.
Apps are tied to the Apple ID used to download them, you can not transfer them.

I can't download from app store apps. if i try then open account and ask me shange payment type because there is a billing problem with a previous purchase. I download one game 0.99 and nothing more! help me. How can i contact with apple?

I can't download from app store apps. if i try then open account and ask me shange payment type because there is a billing problem with a previous purchase. I download one game 0.99 and nothing more! help me. How can i contact with apple?

Click here and ask the iTunes Store staff for assistance.
(102938)

I have a late 2011 model MacBook Pro running Mountain Lion. I love the AirPlay mirroring feature with Apple TV...BUT, how do I mirror with TVs that don't have Apple TV? I used to run a cable from my mini display port to the HDMI input of a TV.

I have a late 2011 model MacBook Pro running Mountain Lion. I love the AirPlay mirroring feature with Apple TV...BUT, how do I mirror with TVs that don't have Apple TV? I used to run a cable from my mini display port to the HDMI input of a TV. This feature seems to be lost in the Mountain Lion upgrade. Did Apple feel that once Mountain Lion came out that EVERYONE would have Apple TV? There are no settings in System Preferences/Display like there used to be...only for AirPlay Mirroring.

Running a cable to the HDMI port is still supported. (and still works on mine).
If the Arrangement tab in System Preferences > Displays isn't present then it doesn't recognize the physical connection. Double check all cables. If that doesn't work try a PRAM reset:
http://support.apple.com/kb/ht1379

How to go further with my 9950BE on my K9A2 platinum MB?

Similar Messages

Maybe you are looking for