How to go quickly to a date in the future in Calendar app

i've got my iPhone since almost 3 years and the only thing (really!) that keeps me longing to my Nokia 6210 is the fact that if i want to schedule an appointment in let's say this time next year, i have to go to month view and than skip month by month for ages. Nokia just let you do 'go to date' > tap 2/22/2014 > done.
i hope that this is a stupid question and that somebody tells me what's the workaround NOW!
ps: i'm NOT looking for jailbreak solutions. good for you, not dissing, but i'm not interested, thanks for understanding.
much thanks in advance for your help

I am not familiar with a way to do it in the Calendar app itself on the iPhone. It is easier to do on an iPad with the Year pane. But a 3rd party app like Fantastical lets you do any date that you wish on the fly.

Similar Messages

How do you remove back up data from the memory storage? my storage data states that i have over 80gb of data used for back ups and i dont know why as i use a external hard drive as a time machine .now my 250gb flash storage is nearly full

how do you remove back up data from the memory storage? my storage data states that i have over 80gb of data used for back ups and i dont know why as i use a external hard drive as a time machine .now my 250gb flash storage is nearly full.. HELP!

When Time Machine backs up a portable Mac, some of the free space will be used to make local snapshots, which are backup copies of recently deleted files. The space occupied by local snapshots is reported as available by the Finder, and should be considered as such. In the Storage display of System Information, local snapshots are shown as Backups. The snapshots are automatically deleted when they expire or when free space falls below a certain level. You ordinarily don't need to, and should not, delete local snapshots yourself. If you followed bad advice to disable local snapshots by running a shell command, you may have ended up with a lot of data in the Other category. Ask for instructions in that case.
See this support article for some simple ways to free up storage space.

How do I set an email to send at a specific time/date in the future e.g. tomorrow at 9am. I am on an iMACX using apple's version of windows

how do I set an email to send at a specific time/date in the future e.g. tomorrow at 9am. I am on an iMAC using apple's version of windows

apple don't have a version of windows
only microsoft have windows
as how one automatate windows to send mails at a time
googled it for you
http://www.howtogeek.com/125045/how-to-easily-send-emails-from-the-windows-task- scheduler/
more options in the search
https://www.google.dk/search?client=opera&q=automatically+send+email+in+windows& sourceid=opera&ie=UTF-8&oe=UTF-8

I own a ipad mini and a iPod touch , both configured on the same apple account, how do I ensure that my data on the ipad mail,notes,pics etc is not visible/accessible on the ipod

I own a ipad mini and a iPod touch both configured on the same id
How do I ensure that my data on the ipad mail,notes,pics etc is not visible/accessible on the iPod touch when the iPod is connected to a wi fi connection

Mail: do not have the same account loaded onto the two devices.
Photos: go into Settings->Photos & Camera->and turn off photo stream.
everything else, sign out of the Apple ID on the device you dont want to be visible.
good luck

The logic board on my MacBook Pro has failed. How do I retrieve all my data from the hard drive?

The logic board on my MacBook Pro has failed. How do I retrieve all my data from the hard drive?

Remove the drive and put it in an external enclosure. Backup the drive completely. Repartition and format the drive. Replace the drive into the computer. Take the computer in for the logicboard replacement.

In the Date Picker, How can I default to select * dates if the user does ..

In the Date Picker, How can I default to select * dates if the user does not select a date.
Thanks,
Doug

Doug,
Now lets say l want everythingCould you post some sample data and the output that you want to get..? It would be much easy to understand the requirements...
When you mean everything, I am assuming you need all possible dates possible between date1 and date2.
you can use... (from asktom.oracle.com).
1 select to_date('12-jan-2009','DD-MON-YYYY') + rownum -1
2    from ALL_OBJECTS
3    where rownum <= (to_date('20-jan-2009','dd-mon-yyyy') -
4*                     to_date('12-jan-2009','DD-MON-YYYY') +1 )
sql> /
TO_DATE('
12-JAN-09
13-JAN-09
14-JAN-09
15-JAN-09
16-JAN-09
17-JAN-09
18-JAN-09
19-JAN-09
20-JAN-09
9 rows selected.
For your case, since you have date1 and date2...
select to_date(:p12_date1,'DD-MON-YYYY') + rownum -1
from ALL_OBJECTS
where rownum <= (to_date(:p12_date2,'dd-mon-yyyy') -
                    to_date(:p12_date1,'DD-MON-YYYY') +1 )Should work.. in my opinion...Haven't tested the second one in Apex .
Is this what you were looking for ..?? If not, please elaborate...
Thanks,
Rajesh.

How does replicate recover trail raw data to the true values?

How does replicate recover trail raw data to the true values?
or
How replicate use the trail file?
recover the trail file col values to a SQL?

user5834416 wrote:
How does replicate recover trail raw data to the true values?
or
How replicate use the trail file?
recover the trail file col values to a SQL?GoldenGate "capture" (extract) parses the redo/archive logs and writes out trail data in a GG-specific, database independent format. The trail contains changed-data events: inserts, updates & deletes (and optionally DDL events.) The GG replicat reads this data and converts the data to SQL to be applied to the target.
The GG trail files are not the same as the data as originally seen in the redo logs (GG is not doing any type of log-shipping of redo logs). The actual data in the trail isn't really important for end-users; it's an implementation detail (much like you shouldn't care what Oracle's redo log format is). But you can use "logdump" to inspect the contents of this (binary) file... again, kind of like LogMiner can be used to inspect archive logs.
There are a number of (conceptual) analogies one can draw between Oracle redo logs & GG trail files. But they're not the same. Your questions are mostly internal implementation details that are not really important for understanding how GoldenGate works. Nonetheless, it is useful to become familiar with logdump for advanced troubleshooting.
Good luck,
-m

How can get difference between 2 dates in the form of days

how can get difference between 2 dates in the form of days

Hi,
Check the following program:
REPORT ZDATEDIFF.
DATA: EDAYS   LIKE VTBBEWE-ATAGE,
      EMONTHS LIKE VTBBEWE-ATAGE,
      EYEARS LIKE VTBBEWE-ATAGE.
PARAMETERS: FROMDATE LIKE VTBBEWE-DBERVON,
            TODATE   LIKE VTBBEWE-DBERBIS DEFAULT SY-DATUM.
call function 'FIMA_DAYS_AND_MONTHS_AND_YEARS'
exporting
    i_date_from          = FROMDATE
    i_date_to            = TODATE
I_FLG_SEPARATE       = ' '
IMPORTING
    E_DAYS               = EDAYS
    E_MONTHS             = EMONTHS
    E_YEARS              = EYEARS.
WRITE:/ 'Difference in Days   ', EDAYS.
WRITE:/ 'Difference in Months ', EMONTHS.
WRITE:/ 'Difference in Years ', EYEARS.
INITIALIZATION.
FROMDATE = SY-DATUM - 60.
Regards,
Bhaskar

How i cen get back deleted data from the bin?

how i cen get back deleted data from the bin?

Not once you have put the data in the trash and pressed the button to delete it.
There may be some hope if you can understand what I am telling you in my first post to you.
Time machine is too complex to explain in this kind of post but I am giving you five links below which should explain quite a lot. There are no formal instruction manuals for Time Machine.
Time Machine Tutorial
Time Machine 101
How to back up and restore your files This in particular
Time Machine Features
Apple - Support - Mac OSX v10.5 Leopard Time Machine

When I try to disable cellular data in the settings for my apps it will toggle fine, but once I exit and go back in to the cellular settings its back on again all by itself.

I have had a problem with my iphone 4s for some time now but I have just been so busy to try and fix it. When I try to disable cellular data in the settings for my apps it will toggle fine, but once I exit and go back in to the cellular settings its back on again all by itself. However, even though it says the data is on, I can’t use the data when I don’t have wifi. I tried restoring my phone a few times and the last time I did that, it wouldn’t turn my service on so I had to talk with a Verizon agent for a long time trying to fix it and finally they simply sent me another phone. I thought hey new phone, this part will be fixed. However, I got my service to work but it’s still the same problem with the cellular data. I have just left it alone and not worried about it, but it’s still not fixed and thought I could ask on here if anyone had any ideas. It has something to do with the apps actually installed on the iphone. Apps like the mail, safari, settings, itunes apps, etc. All my other apps turn on and off just fine. Does anyone have any ideas?

Read the User's Guide... it covers how to backup and sync the device as designed.

Iphoto changes the date on some events to a date in the future

I went into my iphoto and noticed some events had been changed to a date in the future. It seems to do it on random events. It also grouped all of my videos into one event dated the end of May. Does anyone know what causes this and how to prevent it?

Make a temporary, duplicate copy of your library and apply the three fixes in order as necessary.
Fix #1
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your HD/User/Home()/ Library/Preferences folder.
2 - delete iPhoto's cache file, Cache.db, that is located in your HD/User/Home()/Library /Caches/com.apple.iPhoto folder.
3 - launch iPhoto and try again.
NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto. You'll also have to reset the iPhoto's various preferences.
Fix #2
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Select the options identified in the screenshot.
Fix #3
Using iPhoto Library Manager to Rebuild Your iPhoto Library
Download iPhoto Library Manager and launch.
Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
In the next window name the new library and select the location you want it to be placed.
Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT

Applicatons that are superseded with a deadline date in the future, kicks of before deadline date has been passed.

So how to explain this as best as possible....
First off, I have seen this "issue" since ConfigMgr 2012 RTM and I have seen it continuously through the various upgrades done on the way to ConfigMgr 2012 R2. The environment consists of a single AD domain, one ConfigMgr Primary site with 30 DP's
and 1500 computers.
Application B is created and it should supersede application A. The application is present on all computers throughout the environment. The application is distributed to all DP's. The deployment of application A is targeted to a collection containing all
computers. Then the deployment of application A is deleted. Application B is then configured to supersede application A with an uninstall of application A and the deployment type is replaced with the deployment type of application B. The option that Allows
users to see older deployment types is not selected. Now application B is deployed to the same collection as application A was. The deployment settings are configured with a deadline date in the future (to match the corporate maintenance window - not a ConfigMgr
maintenance window), but the application should be visible for users who want to upgrade before the deadline is reached. The option of automatically upgrading any superseded versions of the application is selected. The deployment is not created as a required
deployment, but only available.
What happens after the above is done is a bit odd. If I compare a application deployment that is superseded, to the Software Updates that normally have the same psychological effect on users (for anyone in IT this is common knowledge to be: Postpone and
don't bug me again until deadline has passed and then becomes a forced installation/update, for about 70% of the user mass) this is not the case. After about 24 hours about every single computer that is online has received the deployment of application B and
has been successfully installed. I refuse to believe that close to a 100% of the users actually select the option to upgrade application B before the deadline has been passed.
I have checked the above and it looks like it does not honor the deadline given and finds out that when it can kick of the deployment, it does.
This also happens if I don't delete the deployment of application A and leave it deployed to the same collection as the superseding application B is deployed to.
Any ideas on why I'm seeing this behavior would be greatly appriciated.
/Tom Erik

Well, it's an available deployment. The only thing that it should do is to upgrade the superseded application, if present on the computer and that is set to be performed several weeks in the future. In the particular example (log files) below, the deadline
is set to be on 1 April 2015 (!). All deployments are set to use client local time, when deployed to a computer collection. All other user (if I remember correct) deployments are set to use UTC, as client local time is not an option.
What I do see on a particular computer is that when no user was logged on, the deployment started the application installation. This is what I found in the AppEnforce.log (notice the time stamp around the 18th at 13:42):
+++ Starting Uninstall enforcement for App DT "Install Microsoft Office 2010 w/SP2 - x86 - Windows Installer (*.msi file)" ApplicationDeliveryType - ScopeId_5A0DA406-A98B-4302-9061-7A14FC9FCC1E/DeploymentType_7edd6b29-eb40-4019-a0c6-04da65e3407a, Revision - 4, ContentPath - C:\WINDOWS\ccmcache\o1, Execution Context - System AppEnforce 18.02.2014 13:42:20 1164 (0x048C)
A user is not logged on to the system. AppEnforce 18.02.2014 13:42:21 1164 (0x048C)
Performing detection of app deployment type Install Microsoft Office 2010 w/SP2 - x86 - Windows Installer (*.msi file)(ScopeId_5A0DA406-A98B-4302-9061-7A14FC9FCC1E/DeploymentType_7edd6b29-eb40-4019-a0c6-04da65e3407a, revision 4) for system. AppEnforce 18.02.2014 13:42:21 1164 (0x048C)
+++ Discovered application [AppDT Id: ScopeId_5A0DA406-A98B-4302-9061-7A14FC9FCC1E/DeploymentType_7edd6b29-eb40-4019-a0c6-04da65e3407a, Revision: 4] AppEnforce 18.02.2014 13:42:21 1164 (0x048C)
App enforcement environment:
Context: Machine
Command line: setup.exe /uninstall ProPlus /config uninstall_config.xml
Allow user interaction: No
UI mode: 0
User token: null
Session Id: 4294967295
Content path: C:\WINDOWS\ccmcache\o1
Working directory: AppEnforce 18.02.2014 13:42:21 1164 (0x048C)
Prepared working directory: C:\WINDOWS\ccmcache\o1 AppEnforce 18.02.2014 13:42:21 1164 (0x048C)
Prepared command line: "C:\WINDOWS\ccmcache\o1\setup.exe" /uninstall ProPlus /config uninstall_config.xml AppEnforce 18.02.2014 13:42:22 1164 (0x048C)
Executing Command line: "C:\WINDOWS\ccmcache\o1\setup.exe" /uninstall ProPlus /config uninstall_config.xml with system context AppEnforce 18.02.2014 13:42:22 1164 (0x048C)
Working directory C:\WINDOWS\ccmcache\o1 AppEnforce 18.02.2014 13:42:22 1164 (0x048C)
Post install behavior is BasedOnExitCode AppEnforce 18.02.2014 13:42:22 1164 (0x048C)
Waiting for process 5108 to finish. Timeout = 120 minutes. AppEnforce 18.02.2014 13:42:22 1164 (0x048C)
Process 5108 terminated with exitcode: 3010 AppEnforce 18.02.2014 13:51:27 1164 (0x048C)
Looking for exit code 3010 in exit codes table... AppEnforce 18.02.2014 13:51:27 1164 (0x048C)
Matched exit code 3010 to a PendingSoftReboot entry in exit codes table. AppEnforce 18.02.2014 13:51:27 1164 (0x048C)
++++++ App enforcement completed (547 seconds) for App DT "Install Microsoft Office 2010 w/SP2 - x86 - Windows Installer (*.msi file)" [ScopeId_5A0DA406-A98B-4302-9061-7A14FC9FCC1E/DeploymentType_7edd6b29-eb40-4019-a0c6-04da65e3407a], Revision: 4, User SID: ] ++++++ AppEnforce 18.02.2014 13:51:27 1164 (0x048C)
And this kind of corresponds with what I can see in the ServiceWindowManager.log (again, notice the timestamp at 13:42):
OnIsServiceWindowAvailable called with: Runtime:1, Type:6 ServiceWindowManager 18.02.2014 05:00:00 3924 (0x0F54)
Biggest Active Service Window for Type=6 not found ServiceWindowManager 18.02.2014 05:00:00 3924 (0x0F54)
Program cannot Run! Setting *canProgramRun to FALSE ServiceWindowManager 18.02.2014 05:00:00 3924 (0x0F54)
WillProgramRun called with: Runtime:1, Type:6 ServiceWindowManager 18.02.2014 05:00:00 3924 (0x0F54)
A Service Window of this type exists. ServiceWindowManager 18.02.2014 05:00:00 3924 (0x0F54)
There exists a Service Window of this Type, for this duration. The Program will run eventually. ServiceWindowManager 18.02.2014 05:00:00 3924 (0x0F54)
ServiceWindowManager 18.02.2014 05:00:00 3924 (0x0F54)
OnIsServiceWindowAvailable called with: Runtime:7200, Type:2 ServiceWindowManager 18.02.2014 13:42:17 5504 (0x1580)
No Restricting Service Windows exist. It can therefore run... ServiceWindowManager 18.02.2014 13:42:17 5504 (0x1580)
OnIsServiceWindowAvailable called with: Runtime:7200, Type:2 ServiceWindowManager 18.02.2014 13:42:19 3396 (0x0D44)
No Restricting Service Windows exist. It can therefore run... ServiceWindowManager 18.02.2014 13:42:19 3396 (0x0D44)
OnIsServiceWindowAvailable called with: Runtime:7200, Type:2 ServiceWindowManager 18.02.2014 13:51:27 5704 (0x1648)
No Restricting Service Windows exist. It can therefore run... ServiceWindowManager 18.02.2014 13:51:27 5704 (0x1648)
OnIsServiceWindowAvailable called with: Runtime:7200, Type:2 ServiceWindowManager 18.02.2014 13:51:28 756 (0x02F4)
No Restricting Service Windows exist. It can therefore run... ServiceWindowManager 18.02.2014 13:51:28 756 (0x02F4)
OnIsServiceWindowAvailable called with: Runtime:7200, Type:2 ServiceWindowManager 18.02.2014 14:03:52 5060 (0x13C4)
No Restricting Service Windows exist. It can therefore run... ServiceWindowManager 18.02.2014 14:03:52 5060 (0x13C4)
OnIsServiceWindowAvailable called with: Runtime:7200, Type:2 ServiceWindowManager 18.02.2014 14:03:52 6096 (0x17D0)
No Restricting Service Windows exist. It can therefore run... ServiceWindowManager 18.02.2014 14:03:52 6096 (0x17D0)
OnIsServiceWindowAvailable called with: Runtime:7200, Type:2 ServiceWindowManager 18.02.2014 14:04:12 4192 (0x1060)
No Restricting Service Windows exist. It can therefore run... ServiceWindowManager 18.02.2014 14:04:12 4192 (0x1060)
OnIsServiceWindowAvailable called with: Runtime:7200, Type:2 ServiceWindowManager 18.02.2014 14:04:14 5828 (0x16C4)
No Restricting Service Windows exist. It can therefore run... ServiceWindowManager 18.02.2014 14:04:14 5828 (0x16C4)
There are no maintenance windows configured in ConfigMgr at all for any collections.
/Tom Erik

FPBW: Extract Open Items with a posting date in the future

Dear all,
I'm are currently searching for possibilities to extract Open Items with a posting date in the future from SAP IS-U 4.72 into SAP BW 3.5.
Currently I'm using the Business Content extractor 0FC_OP_01 together with the mass transaction FPBW in IS-U.
The problem I'm facing is within the mass transaction FPBW. I've have set the key date at 01.11.2007, but this job already runs for 52.000 seconds on the same database select-statement.
Does anybody know a possible solution to improve the performance of the statement below? (I pasted it from the process overview)
================================
SELECT
/*+
INDEX("DFKKOP" "DFKKOP~1" "DFKKOP^1" "DFKKOP____1" "DFKKOP____1__X" "DFKKOP_1")
"BETRH" , "BETRW" , "BUDAT" , "BUKRS" , "FAEDN" , "GPART" , "GSBER" , "INKPS" , "SPART" , "VKONT" ,
"WAERS" , "MAHNV" , "ABWBL" , "APPLK" , "AUGBD" , "AUGBL" , "AUGBT" , "AUGDT" , "AUGRD" , "AUGST" ,
"AUGWA" , "BLART" , "BLDAT" , "EMGPA" , "GRKEY" , "HVORG" , "MANSP" , "MWSKZ" , "OPBEL" , "OPSTA" ,
"OPUPK" , "PERSL" , "PYMET" , "QSSHB" , "SBETW" , "SPZAH" , "STUDT" , "TVORG" , "VTREF" , "XBLNR" ,
"XMANL" , "HKONT" , "OPUPZ" , "OPUPW" , "STAKZ" , "WHGRP" , "AUGBS" , "XANZA" , "XRAGL" , "ABWTP" ,
"ASTKZ"
FROM
"DFKKOP"
WHERE
"MANDT" = :A0 AND "AUGST" = :A1 AND "GPART" BETWEEN :A2 AND :A3 AND ( "AUGDT" = :A4 OR "AUGDT" > :A5
AND ( "BUDAT" <= :A6 OR "AUGBD" <= :A7 ) OR "WHGRP" <> :A8 AND "OPUPW" = :A9 )
ORDER BY
"AUGST" , "GPART"#
=================================
I have already tried to create an index on the following fields (in the same order):
- MANDT           Client
- AUGST           Clearing status
- GPART           Business Partner Number
- AUGDT           Clearing date
- BUDAT           Posting Date in the Document
Any help would be appreciated!
Thanks in advance,
Steven Groot

Hi Marcos,
When you have created the Restricted keyfigures for Open Items, You have to add the date characteristic on which you are looking open item and add the variable there.Here you have to use a variable of type Interval and select the operator "<" the date of the Variable.If you go through, there are standard variable for keydate, which you can use directly.
Hope you got the idea
Regards
Happy Tony

I can no longer get my calendar to send a reminder e-mail for on a date in the future....alerts no problem

I can no longer get my calendar to send a reminder e-mail for on a date in the future....alerts no problem

Try turning the account off and on : Settings > Mail, Contacts, Calendars , then tap the account on the right, slide Mail to 'off', exit settings and go back into the Mail app, and then go back to Settings and slide Mail back to 'on'
If that doesn't work then try closing the Mail app completely : from the home screen (i.e.not with the Mail app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Mail app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
Also do a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

HT204266 How do I retrieve a lost iphone with the Find My Iphone app?

How do I retrieve a lost iphone with the Find My Iphone app?
I got my iphone stolen right out of my bag and I am assuming there is no way of retrieving the phone back unless I have the Find My Iphone app? I am hoping someone could prove me wrong or give me another solution to getting it back. I have a lot of photos, videos and memories in that phone and I would do anything to get it back. Please help!

"I got my iphone stolen right out of my bag and I am assuming there is no way of retrieving the phone back unless I have the Find My Iphone app?"
It is not an app. It is a feature of icloud and iphone. Did you set it up on the iphone itself BEFORE it was stolen? If not, then you cannot track it at all.
Change your passwords and report it to the police.

How to go quickly to a date in the future in Calendar app

Similar Messages

Maybe you are looking for