How to go to a different Transaction from a Transaction iview

Hi Experts,
I have one question and I need you help regarding this.
1 . How to go to a different R3 transaction from an existing R3-Transaction iview in portal.
     Lets assume I have one iview which points to tcode : MIRO(R3 transaction)
     Now the end user wants to go to a different transaction(for example : FB60) from this iview.
      He wants to navigate to different transaction from inside portal only and not from ECC.
Thanks a lot in advance.

Dont you want the user to enter this transaction in the command field after entering MIRO and let them work ike we work in R/3?
or make a transaction iview with transaction "SESSION_MANAGER" which will take the user to SAP initial screen and probably there user can go to any transaction to which he is authorized to.
Regards
Puneet

Similar Messages

How can I order two different calendars from iPhoto in the same order?

How can I order two different calendars from iPhoto in the same order?

You cannot - the "Buy Calendar" button is only available, while viewing one calendar. You can order more than one copy of the same calendar on one order, however.

How can I Generate two different reports from single execution of Test cases in NI teststand

Hi,
My requirement is to generate two different reports from NI teststand. One for the Logging of error descriptions and the other report is by default generated by the Teststand. How can i generate a txt file that contains error descriptions other than that mentioned in the default report?
Solved!
Go to Solution.

Do you need to do that just for these two sequences but not for other sequences? I don't see a problem to use SequenceFilePostStepRuntimeError. Create this callback in both sequence files and configure them to log into the same file. SequenceFilePostStepRuntimeError callback is called after each step of the sequence file if it has runtime error. You can access the calling step error information via RunState.Caller.Step.Result.Error property. Take a look to attached example.
The "other way" is useful if you need to log errors not for every step of the sequence file, but for some of them. This is more complex, because you need to create a custom step types for these steps. For the custom step you can create substeps (post-step in your case) which will be executed every time after step of this type executed. Then, this is you job to determine if error happened in the step, acces to step's error information is via Step.Result.Error property.
Also, be aware that step's post-expression is not executed in case of error in the step.
Sergey Kolbunov
CLA, CTD
Attachments:
SequenceFilePostStepRuntimeError_Demo.seq ‏7 KB

How do I order multiple different cards from iPhoto in the same order?

I would like to create and order numerous different cards in iPhoto. How can I put the different cards in one order instead of each different card being a separate order?

don't they read these forums? What is the point of the forum if they don't listen to our voices. Guess this is a load of **** too then! Eesh, should have stuck to PC! At least you know Microsoft are a bunch of robbing ****** who don't care... Apple make a show of caring but they clearly don't
I have had a long chat on the phone with a lovely chap in Ireland who works for Apple 'Executive' Relations - not sure if that is a joke too mind you!
Take a chill pill!
E

Error calling transaction from a transaction

Hi,
I have created a transaction to batch Measurement Point readings for the PM Module. The batch uses a query to determine the tags required to update and it calls the "MeasurementPointWrite" transaction that I downloaded from SAP. My problem is when I run the batch transaction it reports "TransactionLoadException: Unable to find transaction file specified"
Has anyone seen this issue?
The following shows the relevant log dump:
[DEBUG] [MPWriteCall]: Started action execution
[DEBUG] [MPWriteCall]: Type: TransactionCall, Description: MeasurementPointWrite Transaction Call
[DEBUG] [MPWriteCall]: [Initializing Action][Initializing Parameters: [MPWriteCall.StoreTransactionOutput = MPWriteCall.StoreTransactionOutput=[boolean:false]][MPWriteCall.ResetState = MPWriteCall.ResetState=[boolean:true]][MPWriteCall.Persist = MPWriteCall.Persist=[string:INHERIT]][MPWriteCall.Async = MPWriteCall.Async=[boolean:false]][MPWriteCall.Expiration = MPWriteCall.Expiration=[long:21600000]]]
[DEBUG] [MPWriteCall]: Resolving Input Links
[DEBUG] [MPWriteCall]: Link Stats: MPWriteCall.Reader, Type [Assign], Time [ <1 ms], Expression: "PCS7 Automatic"
[DEBUG] [MPWriteCall]: Link Stats: MPWriteCall.DebugFlag, Type [Assign], Time [ <1 ms], Expression: Transaction.DebugFlag
[DEBUG] [MPWriteCall]: Link Stats: MPWriteCall.MeasurementPoint, Type [Assign], Time [ <1 ms], Expression: PCSTagRepeater.Item{/Row/POINT}
[DEBUG] [MPWriteCall]: Link Stats: MPWriteCall.Reading, Type [Assign], Time [ <1 ms], Expression: PCSTagRepeater.Item{/Row/Value}
[DEBUG] [MPWriteCall]: Link Stats: MPWriteCall.Text, Type [Assign], Time [ <1 ms], Expression: "PCS TimeStamp: "&PCSTagRepeater.Item{/Row/TimeStamp}
[DEBUG] [MPWriteCall]: Link Stats: MPWriteCall.CreateOutputXML, Type [Assign], Time [ <1 ms], Expression: Transaction.CreateOutputXML
[DEBUG] [MPWriteCall]: Link Stats: MPWriteCall.CreateNotif, Type [Assign], Time [ <1 ms], Expression: Local.Blank
[DEBUG] [MPWriteCall]: Link Stats: MPWriteCall.NotificaitonType, Type [Assign], Time [ <1 ms], Expression: Local.Blank
[DEBUG] [MPWriteCall]: Link Stats: MPWriteCall.DifferenceFlag, Type [Assign], Time [ <1 ms], Expression: Local.Blank
[DEBUG] Action parameter creating time [ <1 ms]
[DEBUG] Entering action 'MPWriteCall' implementation.
[DEBUG] [] Loading transaction from file.
[FATAL] [] Unable to find transaction in file system: .trx
[DEBUG] Exiting action 'MPWriteCall' implementation
[ERROR] Error found trying to execute action 'MPWriteCall' Exception: [Unable to find transaction file specified]
[WARN] [MPWriteCall] Skipping execution of output links due to action failure.
[ERROR] [MPWriteCall] Action: Runtime threw an exception. Exception: [com.sap.xmii.bls.exceptions.TransactionLoadException: Unable to find transaction file specified]
[DEBUG] [MPWriteCall]: Finished[ <1 ms] Succeeded: false

For what it's worth, it appears to be a problem at the source. I have the same problem with the same downloaded file. Looking at the xml, there is an error in the self-reference of location. I was unable to figure out how to modify the xml of the export such that a reimport would fix it. (Export it and look at the xml - do a find on MeasurementPointWrite and you will see what I mean).
However, try the following:
Create a new transaction.
Copy the top sequence and include children of the MeasurementPointWrite transaction (basically you are copying the entire transaction contents).
Paste it to the empty sequence in your new transaction.
Save it under some name.
Create another new transaction.
Drag and drop your first new transaction into the empty sequence of your second new transaction.
Now it works...
Go figure.
Regards,
Mike
Edited by: Michael Appleby on Oct 18, 2010 7:44 PM

How do I keep two different iPads from having all the same apps

I have an IPOD Touch and an IPAD 2. My wife would like the IPAD 2 since I am getting the new iPad. Right now the IPOD Touch and the IPAD have all the same apps on them, since I cannot create a different configuration for each one. Now that I am getting the new IPAD, how do I set up a different sync configuration for each of the two IPADs? Right now I have to manually delete the IPOD Touch apps from the IPAD each time I sync, since they do not display correctly on the IPAD (small screen in middle of IPAD). I just wonder if I have to manually remove my apps from my wife's IPAD every time I sync the IPADs in ITunes. She does not want all the stuff I currently have on my IPAD. I use an iMAC for the sync.
Thanks

It sounds like you're using the same AppleID to purchase apps for all devices, is that right? If so, you need to make sure that
- You turn OFF automatic downloads for Apps (on the device, Settings, Store, Apps, turn off downloading)
- You manually sync each device through iTunes (once you connect the device, or if you sync through wifi, you can specify which apps get synced to each device). In the Apps tab in iTunes, make sure you only select the apps you want to be on that device.
Matt

How can I prevent two different profiles from interfering with one another?

I have a serious profiles problem. I created a new profile with Profile Manager and then copied a well-established profile's contents into its directory before starting the new profile. Now, when I start either profile, it contains whatever tabs I had in the previously opened profile. I deleted a bunch of tabs and a window from the new profile but when I opened it after having opened and closed the old profile, the tabs and window reappeared. If I open some tabs in the new profile and then close it and open the old profile, the tabs appear in it, and vice versa.
I open the original profile through a shell script:
<pre>/Applications/Firefox.app/Contents/MacOS/firefox -P "profile 1"</pre>
I open the second one the same way but with the -no-remote parameter:
<pre>/Applications/Firefox.app/Contents/MacOS/firefox -P "profile 1 clone" -no-remote</pre>
Why do the two profiles collide like that and how can I prevent this from happening?

Are you using Sync then ?
Or are you setting a bunch of tabs as the homepage ?
If you cloned a profile they will start off the same and that will include the set of open tabs from the file ''sessionstore.js'' however profiles are independent and so should have there own sessionstore and History once they have been used.

BB 9320 CURVE : How can I received 2 different accounts from Gmail ?

Hello,
I received all mails from my first gmail account;
i have a second one now and can't link it.
My operator is Free;
Apparently, I can just have 1 adress gmail and the second in [email protected] ?
But I think that BlackBerry can solve it in replacing their brand adress ([email protected]) by [email protected]....
Or if someone met this problem and /or have a solution, let me know.
Many thanks in advance.

Hi and Welcome to the Community!
Normally, a personal BIS account from a mobile service provider allows for 10 personal email accounts to be added to the device. But, the quantity can vary depending on the level of service you have contracted for. I have heard of restrictions on FREE, but don't recall if they are exactly as you describe. I recommend you contact FREE to find out how many email accounts, and of what type, you are allowed to have.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

How do i superimpose different charts from different sequences and get them to show up while i am taking data

I have six different frames in a sequence and I have a Build XY Graph express icon in each frame. I want to display only one graph on the front panel, and want the data to superimpose when I go through each frame of the sequence. I want the graph to update while I am taking data.

Here is an example in 8.2 of how I would do it, this method may have performance issues with large data sets.
Andrew Alford
Production Test Engineering Technologist
Sustainable Energy Technologies
www.sustainableenergy.com
Attachments:
Superimpose XY Example.vi ‏37 KB

How do I send non-transacted from an transacted onMessage?

I am having difficulties sending a message from within an transacted
          onMessage() (TX=req) in such a way that the send operation will
          not be part of the running transaction. In particular, I want the
          message to become visible immediatly for delivery to the
          destination MDB, not only after the current onMessage is done.
          I tried
          sess = qConnect.createQueueSession(false, Session.AUTO_ACKNOWLEDGE);
          (just because I was desperate; My understanding is that this should
          explicitly respect the running TX)
          as well as
          sess = qConnect.createQueueSession(true, 0);
          to no avail.
          Using
          sess = qConnect.createQueueSession(true, 0);
          and calling
          sess.commit();
          right after the send operation causes:
          javax.ejb.EJBException: nested exception is: javax.jms.TransactionInProgressException: Error commiting session
          at a.b.FooMDB.onMessage(Ljavax.jms.Message;)V(Unknown Source)
          at weblogic.ejb20.internal.MDListener.execute(Lweblogic.kernel.ExecuteThread;)V(Unknown Source)
          at weblogic.ejb20.internal.MDListener.transactionalOnMessage(Ljavax.jms.Message;)V(Unknown Source)
          at weblogic.ejb20.internal.MDListener.onMessage(Ljavax.jms.Message;)V(Unknown Source)
          at weblogic.jms.client.JMSSession.onMessage(Ljavax.jms.MessageListener;Lweblogic.jms.common.MessageImpl;)V(Unknown Source)
          at weblogic.jms.client.JMSSession.execute(Lweblogic.kernel.ExecuteThread;)V(Unknown Source)
          at weblogic.kernel.ExecuteThread.execute(Lweblogic.kernel.ExecuteRequest;)V(Unknown Source)
          at weblogic.kernel.ExecuteThread.run()V(Unknown Source)
          at java.lang.Thread.startThreadFromVM(Ljava.lang.Thread;)V(Unknown Source)
          It seems like JMS wants to exclusively taking care of committing the
          session.
          Or does the problem have nothing to do with the createQueueSession()? Any hints?
          Kai


Just to be clear, you receive a message in a MDB which has the Required
          transaction attribute and you want that MDB to publish a message to
          another destination. And you don't want the publish to participate in
          the current tx.
          I'd recommend that you have your MDB call a stateless session bean which
          has a NotSupported Method. In the NotSupported method you can do the
          publish. The EJB container will handle suspending the current tx before
          the NotSupported method and resuming it afterward.
          -- Rob
          Kai Juse wrote:
          > I am having difficulties sending a message from within an transacted
          > onMessage() (TX=req) in such a way that the send operation will
          > not be part of the running transaction. In particular, I want the
          > message to become visible immediatly for delivery to the
          > destination MDB, not only after the current onMessage is done.
          >
          > I tried
          > sess = qConnect.createQueueSession(false, Session.AUTO_ACKNOWLEDGE);
          > (just because I was desperate; My understanding is that this should
          > explicitly respect the running TX)
          > as well as
          > sess = qConnect.createQueueSession(true, 0);
          > to no avail.
          >
          > Using
          > sess = qConnect.createQueueSession(true, 0);
          > and calling
          > sess.commit();
          > right after the send operation causes:
          > javax.ejb.EJBException: nested exception is: javax.jms.TransactionInProgressException: Error commiting session
          > at a.b.FooMDB.onMessage(Ljavax.jms.Message;)V(Unknown Source)
          > at weblogic.ejb20.internal.MDListener.execute(Lweblogic.kernel.ExecuteThread;)V(Unknown Source)
          > at weblogic.ejb20.internal.MDListener.transactionalOnMessage(Ljavax.jms.Message;)V(Unknown Source)
          > at weblogic.ejb20.internal.MDListener.onMessage(Ljavax.jms.Message;)V(Unknown Source)
          > at weblogic.jms.client.JMSSession.onMessage(Ljavax.jms.MessageListener;Lweblogic.jms.common.MessageImpl;)V(Unknown Source)
          > at weblogic.jms.client.JMSSession.execute(Lweblogic.kernel.ExecuteThread;)V(Unknown Source)
          > at weblogic.kernel.ExecuteThread.execute(Lweblogic.kernel.ExecuteRequest;)V(Unknown Source)
          > at weblogic.kernel.ExecuteThread.run()V(Unknown Source)
          > at java.lang.Thread.startThreadFromVM(Ljava.lang.Thread;)V(Unknown Source)
          >
          > It seems like JMS wants to exclusively taking care of committing the
          > session.
          >
          >
          > Or does the problem have nothing to do with the createQueueSession()? Any hints?
          >
          > Kai
          >

How can I use a different computer from the one on which the initial setup was run for my iphone 3gs?

I would like to use my new MacBook to manage the information on my iphone.
Attempts to use any other computer other than the original one used in the initial setup generates a message that warns me that everything on the iphone will be erased? How can I back up the information and switch to the MacBook?

Copy your entire iTunes folder to your new computer (see http://support.apple.com/kb/HT4527). Then carefully follow the steps in wjosten's post here: https://discussions.apple.com/message/13356770#13356770.

How can I get 2 different track from iTunes playing on 2 different stereos?

We are remodeling a part of our home and decided that this would be the time to install a whole house audio system. We would like to use our iTunes library as a source and be able to play different tracks in different parts of the house (also called zones)
To put it in a slightly different fashion. I could have a dedicated Mac Mini with my iTunes library and it would feed tracks with meta data to 3 stereos in various parts of the house. Each stereo independently select tracks or playlists.
iTunes purchased tracks need to work as well.
Thank you all....

What you need is to use one Mac (or PC) as a server (and storing all the music) and then one of the following in each room connected to that rooms HiFi system.
Sonos ZonePlayer see http://www.sonos.com this is the most expensive option but is regarded as the premier multi-room solution.
Roku SoundBridge see http://www.rokulabs.com (I have three M2000 SoundBridges myself)
Slim Devices Squeezebox see http://www.slimdevices.com
Apple TV see http://www.apple.com/appletv (unlike all the above this will require the use of a TV)
With these, different rooms can play different tracks at the same time with them all stored on the single computer.

How to set the size of popups from KM Navigation Iview

Hello guys
Does any of you know how I can set the size of the window that pops up when you click on a resource/file in a KM navigation iview?
I have tried to enter "width=100,height=100" (without the quotes) in the Window Features property of the KM Navigation Iview, but it does not influence the size of the popups.
Any suggestions to what could be wrong? Or is it not possible at all to control the size of that popup?
Kind regards,
Martin

Hi,
I cheched yesterday if I could find the command, sorry I couldn't.
I also realized that the layout generates html link tags (ie. <a />) for the resource links, no javascript open link functions (ie. window.open), wich doesn't alowed (as far as I know) to give size to the pop-up window.
So to make the link of the resource (gived by the displayname(contectlink) property set) I think you would have to create (develop) the layout, so the link will be rendered with window_size.
You have other option, you can take off the "contentLink" setting. and add the download command, so the user who want to open / save the document can click on this command and do it in their PC.
I.E, Create a copy of the download, and add this to the Collection render displayed porpeties:
rnd:command(command=Z_download/style=link)
You ca also use and icon to represent the download (you can set that icon in the command)
I.E, rnd:command(command=Z_download_icon/style=icon)
This last options represents a problem with the km-only-read content like xml files generaded by xml forms, it can only be readed in the km-portal.
I hope this might help you.
Best regards,
Jorge M.

How to open Content in Desktop Innerpage from Portal Favorites IView

Hi.
We would like our Portal Favorites to open in the desktop inner page instead of a new window. Is there any chance to configure this ?
Thx for your help,
Dirk

Hi,
Refer to /thread/191816 [original link is broken]
Hope this helps.
Regards,
Sunil
PS: Reward points for helpful answers.

Call transaction from java iView (link)

Hi,
I would like to call SAP R/3 transaction from a java iView. I know how to do it using the UrlGenerator service. Is there any other way of doing that ? (better way)
Thanks, Nir.

You can Use EPCM.doNavigate() to call R3 Transaction or something like this:
<hbj:link id="r3"
 text="R3 Transaction">
<% r3.setOnClientClick("OpenWindow('/irj/servlet/prt/portal/prtroot/com.sap.portal.appintegrator.sap.Transaction?System=SAP_R3&TCode=SE80&GuiType=WinGui');return false;"); %>
 </hbj:link>
Regards,
P.

How to go to a different Transaction from a Transaction iview

Similar Messages

Maybe you are looking for