How to go to a particular object in drill down detail pdf report?

In drill down html reports I could directly go to a particular object in the detail report from the summary report by using hyperlink destination property in the detail report and hyperlink property in the summary report.
How can I do the same thing in drill down pdf reports? The summary pdf report is opened first and then clicking on any of the object in summary pdf report should direct me to the same object in detail report.
Thanks for your help.
-Jayshree

Unfortunately PDF doesn't support this concept. You could ensure that the detail report has bookmarks, then the user can easily see the different sections of the report.
Hope this helps,
Danny

Similar Messages

How to setup the drill down on union report

Hi,
I'm setting the union report.
I want to set the drill down to another report.
But I can't setup it.
Would you please tell me how to setup.
Thank you.

Hi Hemlatha
In Crystal Reports, to prevent the ability to drill down into a subreport when published on the Web, add a text object that is filled with blank spaces, created by pressing the 'Space Bar' and 'Enter' for line returns, to eclipse the subreport.
This workaround is applicable only to subreports that does not grow in size. For example, subreports that display only a chart or graph.
Steps to Add a Text Object over a Subreport
1. In the Crystal Reports Designer of the main report, insert a text object over the subreport.
2. Resize the text object to be the same size or a little larger than the subreport object on the main report.
3. Fill the text object with blank spaces created by pressing the 'Space Bar' and 'Enter'. This is necessary because resizing a text object without
the blank spaces will not maintain its size when it has been published on the Web.
====================
NOTE:
You can format the text object with a hyperlink to another report, another file or a URL.
====================
Now, when the Crystal report is previewed on the Web, the text object that fully eclipses the subreport will prevent the ability to drill down into it.
Regards
Girish

How to remove the sort function on the drill down and then save

how to remove the sort function on the drill down and then save in the change local view of the Query
Is it possible to change the porperties of any characteristic in the local view and then save?
If so please post the answer.

I do not think that option is possible.
Regards,
Venkata Boga.

How to drill down another one report on one field value of one row

Hi,
I have two reports that can link together on one field of respective database query command. The effect i want to reach is that when user clicks this field value on some row of one report, which i call source object, another report, target object, would use this value as input parameter and the page would jump to this linked report. I can see Format Editor provides Hyperlink feature when one field is edited, but i don't know how to associate another report as what i described here.
What if one the following conditions is met:
1.one of two objects, source object, is one chart object
2.target object is one chart object
3.two objects are both chart objects
Note: two objects is separately from different reports.
Additionally, is it possible to code for hyperlink functionality under both .NET WinForm and WebForm? what if under RDC?
Thank you
Zhi
Edited by: zhi li on Sep 24, 2008 11:53 AM
Edited by: zhi li on Sep 24, 2008 11:57 AM
Edited by: zhi li on Sep 24, 2008 11:58 AM

I don't know if you can use the hyperlink to call a subreport but the following has worked for me in Crystal 10:
1. In your main report create a group on the field you want to pass to the subreport.
2. In the Group Footer, use the "Insert Section below" menu command so that you have a Group Footer 1a and a Group Footer 1b.
3. Put your table fields in the Group Footer 1b section (this would be similar to your Details data).
4. Put the sub report in the Group Footer 1a section. Set up the links to the subreport from a table field in your main report.
5. Right-click on the sub-report, select "Format Sub-report". Click on the "x-2" button to the right of the Suppress option and enter "DrillDownGroupLevel = 0" in the "Formula Workshop-Formula Format Editor-Suppress" window and save it.
When you double-click on your data field (i.e. the field in Group footer 1b) it should drill-down and run your subreport.

How to make output of ABAp query interactive(drill down)..?

Hi All,
I have developed one ABAP query which shows the output in which there is a coloumm 'order number'.
I want to make this coloumn interactive ,that means after double clicking on any row of this colomn ,it should go to transaction KO02.
Where do i have to write the code in ABAP query ?
I am very new to ABAP query..this is the first query i have deloped till now.
points will be rewarded.
Thnks in advance.
Regards,
Sanjay.

<b>The below sample code is one such example of Drill down reporting...
Make the necessary modifications, change the statement CALL TRANSACTION to whatever you want to CALL. Proceed further.</b>
*"Table declarations...................................................
TABLES:
EKKO,                                " Purchasing Document Header
CDHDR,                               " Change document header
SSCRFIELDS.                          " Fields on selection screens
*"Selection screen elements............................................
SELECT-OPTIONS:
S_EBELN FOR EKKO-EBELN,              " Purchasing Document Number
S_LIFNR FOR EKKO-LIFNR,              " Vendor's account number
S_EKGRP FOR EKKO-EKGRP,              " Purchasing group
S_BEDAT FOR EKKO-BEDAT,              " Purchasing Document Date
S_UDATE FOR CDHDR-UDATE.             " Creation date of the change
                                       " document
*" Data declarations...................................................
Field String to hold Purchase Document Number                       *
DATA:
BEGIN OF FS_EBELN,
    EBELN(90) TYPE C,                  " Purchase Document Number
    ERNAM     TYPE EKKO-ERNAM,         " Name of Person who Created
                                       " the Object
    LIFNR     TYPE EKKO-LIFNR,         " Vendor's account number
    EKGRP     TYPE EKKO-EKGRP,         " Purchasing group
    BEDAT     TYPE EKKO-BEDAT,         " Purchasing Document Date
END OF FS_EBELN,
Field String to hold Purchase Document Header                       *
BEGIN OF FS_EKKO,
    EBELN TYPE EKKO-EBELN,             " Purchasing Document Number
    ERNAM TYPE EKKO-ERNAM,             " Name of Person who Created the
                                       " Object
    LIFNR TYPE EKKO-LIFNR,             " Vendor's account number
    EKGRP TYPE EKKO-EKGRP,             " Purchasing group
    BEDAT TYPE EKKO-BEDAT,             " Purchasing Document Date
END OF FS_EKKO,
Field String to hold Account Number and name of the Vendor          *
BEGIN OF FS_LFA1,
    LIFNR TYPE LFA1-LIFNR,             " Account Number of Vendor
    NAME1 TYPE LFA1-NAME1,             " Name1
END OF FS_LFA1,
Field String to hold Change date and the name of the user           *
BEGIN OF FS_CDHDR,
    OBJECTCLAS TYPE CDHDR-OBJECTCLAS, " Object Class
    OBJECTID   TYPE CDHDR-OBJECTID,    " Object value
    CHANGENR   TYPE CDHDR-CHANGENR,    " Document change number
    USERNAME   TYPE CDHDR-USERNAME,    " User name
    UDATE      TYPE CDHDR-UDATE,       " Creation date of the change
                                       " document
END OF FS_CDHDR,
Field String to hold Change document items                          *
BEGIN OF FS_CDPOS,
    OBJECTCLAS   TYPE CDPOS-OBJECTCLAS," Object class
    OBJECTID(10) TYPE C,               " Object Value
    CHANGENR     TYPE CDPOS-CHANGENR, " Document change number
    TABNAME      TYPE CDPOS-TABNAME,   " Table Name
    FNAME        TYPE CDPOS-FNAME,     " Field Name
    VALUE_NEW    TYPE CDPOS-VALUE_NEW, " New contents of changed field
    VALUE_OLD    TYPE CDPOS-VALUE_OLD, " Old contents of changed field
END OF FS_CDPOS,
Field String to hold Date Element Name                              *
BEGIN OF FS_DATAELE,
    TABNAME   TYPE DD03L-TABNAME,      " Table Name
    FIELDNAME TYPE DD03L-FIELDNAME,    " Field Name
    ROLLNAME TYPE DD03L-ROLLNAME,     " Data element (semantic domain)
END OF FS_DATAELE,
Field String to hold Short Text of the Date Element                 *
BEGIN OF FS_TEXT,
    ROLLNAME TYPE DD04T-ROLLNAME,      " Data element (semantic domain)
    DDTEXT   TYPE DD04T-DDTEXT,        " Short Text Describing R/3
                                       " Repository Objects
END OF FS_TEXT,
Field String to hold data to be displayed on the ALV grid           *
BEGIN OF FS_OUTTAB,
    EBELN      TYPE EKKO-EBELN,        " Purchasing Document Number
    ERNAM      TYPE EKKO-ERNAM,        " Name of Person who Created the
                                       " Object
    LIFNR      TYPE EKKO-LIFNR,        " Vendor's account number
    EKGRP      TYPE EKKO-EKGRP,        " Purchasing group
    BEDAT      TYPE EKKO-BEDAT,        " Purchasing Document Date
    WERKS      TYPE LFA1-WERKS,        " Plant
    NAME1      TYPE LFA1-NAME1,        " Name1
    USERNAME   TYPE CDHDR-USERNAME,    " User name
    UDATE      TYPE CDHDR-UDATE,       " Creation date of the change
                                       " document
    DDTEXT     TYPE DD04T-DDTEXT,      " Short Text Describing R/3
                                       " Repository Objects
    VALUE_NEW TYPE CDPOS-VALUE_NEW,   " New contents of changed field
    VALUE_OLD TYPE CDPOS-VALUE_OLD,   " Old contents of changed field
END OF FS_OUTTAB,
Internal table to hold Purchase Document Number                     *
T_EBELN LIKE STANDARD TABLE
            OF FS_EBELN,
Internal table to hold Purchase Document Header                     *
T_EKKO LIKE STANDARD TABLE
          OF FS_EKKO,
Temp Internal table to hold Purchase Document Header                *
T_EKKO_TEMP LIKE STANDARD TABLE
               OF FS_EKKO,
Internal table to hold Account number and Name of the Vendor        *
T_LFA1 LIKE STANDARD TABLE
           OF FS_LFA1,
Internal Table to hold Change date and the name of the user         *
T_CDHDR LIKE STANDARD TABLE
            OF FS_CDHDR,
Internal Table to hold Change document items                        *
T_CDPOS LIKE STANDARD TABLE
            OF FS_CDPOS,
Temp. Internal Table to hold Change document items                  *
T_CDPOS_TEMP LIKE STANDARD TABLE
                 OF FS_CDPOS,
Internal Table to hold Data Element Name                            *
T_DATAELE LIKE STANDARD TABLE
              OF FS_DATAELE,
Temp. Internal Table to hold Data Element Name                      *
T_DATAELE_TEMP LIKE STANDARD TABLE
                   OF FS_DATAELE,
Internal Table to hold Short Text of the Date Element               *
T_TEXT LIKE STANDARD TABLE
           OF FS_TEXT,
Internal Table to hold data to be displayed on the ALV grid         *
T_OUTTAB LIKE STANDARD TABLE
             OF FS_OUTTAB.
               C L A S S   D E F I N I T I O N                      *
CLASS LCL_EVENT_HANDLER DEFINITION DEFERRED.
*" Data declarations...................................................
Work variables                                                      *
DATA:
    W_EBELN       TYPE EKKO-EBELN,     " Purchasing Document Number
    W_LIFNR       TYPE EKKO-LIFNR,     " Vendor's account number
    W_EKGRP       TYPE EKKO-EKGRP,     " Purchasing group
    W_VALUE       TYPE EKKO-EBELN,     " Reflected Value
    W_SPACE       VALUE ' ',           " Space
    W_FLAG        TYPE I,              " Flag Variable
    W_VARIANT     TYPE DISVARIANT,     " Variant
*--- ALV Grid
    W_GRID        TYPE REF TO CL_GUI_ALV_GRID,
*--- Event Handler
    W_EVENT_CLICK TYPE REF TO LCL_EVENT_HANDLER,
*--- Field catalog table
    T_FIELDCAT    TYPE LVC_T_FCAT.
                      AT SELECTION-SCREEN EVENT                     *
AT SELECTION-SCREEN ON S_EBELN.
Subroutine to validate Purchase Document Number.
PERFORM VALIDATE_PD_NUM.
AT SELECTION-SCREEN ON S_LIFNR.
Subroutine to validate Vendor Number.
PERFORM VALIDATE_VEN_NUM.
AT SELECTION-SCREEN ON S_EKGRP.
Subroutine to validate Purchase Group.
PERFORM VALIDATE_PUR_GRP.
                      START-OF-SELECTION EVENT                      *
START-OF-SELECTION.
Subroutine to select all Purchase orders.
PERFORM SELECT_PO.
CHECK W_FLAG EQ 0.
Subroutine to select Object values.
    PERFORM SELECT_OBJ_ID.
CHECK W_FLAG EQ 0.
Subroutine to select Changed values.
    PERFORM SELECT_CHANGED_VALUE.
CHECK W_FLAG EQ 0.
Subroutine to Select Purchase Orders.
    PERFORM SELECT_PUR_DOC.
Subroutine to select Vendor Details.
    PERFORM SELECT_VENDOR.
Subroutine to select Text for the Changed values.
    PERFORM DESCRIPTION.
                      END-OF-SELECTION EVENT                        *
END-OF-SELECTION.
IF NOT T_EKKO IS INITIAL.
Subroutine to populate the Output Table.
    PERFORM FILL_OUTTAB.
Subroutine to build Field Catalog.
    PERFORM PREPARE_FIELD_CATALOG CHANGING T_FIELDCAT.
    CALL SCREEN 100.
ENDIF.                               " IF NOT T_EKKO...
CLASS LCL_EVENT_HANDLER DEFINITION
Defining Class which handles events
CLASS LCL_EVENT_HANDLER DEFINITION .
PUBLIC SECTION .
    METHODS:
        HANDLE_HOTSPOT_CLICK
             FOR EVENT HOTSPOT_CLICK OF CL_GUI_ALV_GRID
                       IMPORTING E_ROW_ID E_COLUMN_ID.
ENDCLASS.                              " LCL_EVENT_HANDLER DEFINITION
CLASS LCL_EVENT_HANDLER IMPLEMENTATION
Implementing the Class which can handle events
CLASS LCL_EVENT_HANDLER IMPLEMENTATION .
*---Handle Double Click
METHOD HANDLE_HOTSPOT_CLICK .
Subroutine to get the HotSpot Cell information.
    PERFORM GET_CELL_INFO.
    SET PARAMETER ID 'BES' FIELD W_VALUE.
    CALL TRANSACTION 'ME23N'.
ENDMETHOD.                           " HANDLE_HOTSPOT_CLICK
ENDCLASS.                              " LCL_EVENT_HANDLER
*&      Module STATUS_0100 OUTPUT
      PBO Event
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS 'OOPS'.
SET TITLEBAR 'TIT'.
Subroutine to fill the Variant Structure
PERFORM FILL_VARIANT.
IF W_GRID IS INITIAL.
    CREATE OBJECT W_GRID
      EXPORTING
   I_SHELLSTYLE      = 0
   I_LIFETIME        =
        I_PARENT       = CL_GUI_CONTAINER=>SCREEN0
   I_APPL_EVENTS     =
   I_PARENTDBG       =
   I_APPLOGPARENT    =
   I_GRAPHICSPARENT =
   I_NAME            =
   I_FCAT_COMPLETE   = SPACE
      EXCEPTIONS
        ERROR_CNTL_CREATE = 1
        ERROR_CNTL_INIT   = 2
        ERROR_CNTL_LINK   = 3
        ERROR_DP_CREATE   = 4
        OTHERS            = 5.
    IF SY-SUBRC <> 0.
      MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.                             " IF SY-SUBRC <> 0
    CALL METHOD W_GRID->SET_TABLE_FOR_FIRST_DISPLAY
      EXPORTING
       I_BUFFER_ACTIVE               =
       I_BYPASSING_BUFFER            =
       I_CONSISTENCY_CHECK           =
       I_STRUCTURE_NAME              =
        IS_VARIANT                    = W_VARIANT
        I_SAVE                        = 'A'
       I_DEFAULT                     = 'X'
       IS_LAYOUT                     =
       IS_PRINT                      =
       IT_SPECIAL_GROUPS             =
       IT_TOOLBAR_EXCLUDING          =
       IT_HYPERLINK                  =
       IT_ALV_GRAPHICS               =
       IT_EXCEPT_QINFO               =
       IR_SALV_ADAPTER               =
      CHANGING
        IT_OUTTAB                     = T_OUTTAB
        IT_FIELDCATALOG               = T_FIELDCAT
       IT_SORT                       =
       IT_FILTER                     =
      EXCEPTIONS
        INVALID_PARAMETER_COMBINATION = 1
        PROGRAM_ERROR                 = 2
        TOO_MANY_LINES                = 3
        OTHERS                        = 4
    IF SY-SUBRC <> 0.
      MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.                             " IF SY-SUBRC <> 0.
ENDIF.                               " IF W_GRID IS INITIAL
CREATE OBJECT W_EVENT_CLICK.
SET HANDLER W_EVENT_CLICK->HANDLE_HOTSPOT_CLICK FOR W_GRID.
ENDMODULE.                             " STATUS_0100 OUTPUT
*&      Module USER_COMMAND_0100 INPUT
      PAI Event
MODULE USER_COMMAND_0100 INPUT.
CASE SY-UCOMM.
    WHEN 'BACK'.
      LEAVE TO SCREEN 0.
    WHEN 'EXIT'.
      LEAVE PROGRAM.
    WHEN 'CANCEL'.
      LEAVE TO SCREEN 0.
ENDCASE.
ENDMODULE.                             " USER_COMMAND_0100 INPUT
*&      Form PREPARE_FIELD_CATALOG
      Subroutine to build the Field catalog
      <--P_T_FIELDCAT Field Catalog Table
FORM PREPARE_FIELD_CATALOG CHANGING PT_FIELDCAT TYPE LVC_T_FCAT .
DATA LS_FCAT TYPE LVC_S_FCAT.
Purchasing group...
LS_FCAT-FIELDNAME = 'EKGRP'.
LS_FCAT-REF_TABLE = 'EKKO'.
LS_FCAT-INTTYPE   = 'C'.
LS_FCAT-OUTPUTLEN = '10'.
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
Purchasing Document Number...
LS_FCAT-FIELDNAME = 'EBELN'.
LS_FCAT-REF_TABLE = 'EKKO' .
LS_FCAT-EMPHASIZE = 'C411'.
LS_FCAT-INTTYPE   = 'C'.
LS_FCAT-OUTPUTLEN = '10'.
LS_FCAT-HOTSPOT   = 'X'.
APPEND LS_FCAT TO PT_FIELDCAT .
CLEAR LS_FCAT .
Name of Person who Created the Object...
LS_FCAT-FIELDNAME = 'ERNAM'.
LS_FCAT-REF_TABLE = 'EKKO'.
LS_FCAT-OUTPUTLEN = '15' .
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
Purchasing Document Date...
LS_FCAT-FIELDNAME = 'BEDAT'.
LS_FCAT-REF_TABLE = 'EKKO'.
LS_FCAT-INTTYPE   = 'C'.
LS_FCAT-OUTPUTLEN = '10'.
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
Vendor's account number...
LS_FCAT-FIELDNAME = 'LIFNR'.
LS_FCAT-REF_TABLE = 'EKKO'.
LS_FCAT-INTTYPE   = 'C'.
LS_FCAT-OUTPUTLEN = '10'.
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
Account Number of Vendor or Creditor...
LS_FCAT-FIELDNAME = 'NAME1'.
LS_FCAT-REF_TABLE = 'LFA1'.
LS_FCAT-INTTYPE   = 'C'.
LS_FCAT-OUTPUTLEN = '10'.
LS_FCAT-COLTEXT   = 'Vendor Name'(001).
LS_FCAT-SELTEXT   = 'Vendor Name'(001).
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
Creation date of the change document...
LS_FCAT-FIELDNAME = 'UDATE'.
LS_FCAT-REF_TABLE = 'CDHDR'.
LS_FCAT-INTTYPE   = 'C'.
LS_FCAT-OUTPUTLEN = '10'.
LS_FCAT-COLTEXT   = 'Change Date'(002).
LS_FCAT-SELTEXT   = 'Change Date'(002).
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
User name of the person responsible in change document...
LS_FCAT-FIELDNAME = 'USERNAME'.
LS_FCAT-REF_TABLE = 'CDHDR'.
LS_FCAT-INTTYPE   = 'C'.
LS_FCAT-OUTPUTLEN = '10'.
LS_FCAT-COLTEXT   = 'Modified by'(003).
LS_FCAT-SELTEXT   = 'Modified by'(003).
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
Short Text Describing R/3 Repository Objects...
LS_FCAT-FIELDNAME = 'DDTEXT'.
LS_FCAT-REF_TABLE = 'DD04T'.
LS_FCAT-INTTYPE   = 'C'.
LS_FCAT-OUTPUTLEN = '15'.
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
Old contents of changed field...
LS_FCAT-FIELDNAME = 'VALUE_OLD'.
LS_FCAT-REF_TABLE = 'CDPOS'.
LS_FCAT-INTTYPE   = 'C'.
LS_FCAT-OUTPUTLEN = '12'.
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
New contents of changed field...
LS_FCAT-FIELDNAME = 'VALUE_NEW'.
LS_FCAT-REF_TABLE = 'CDPOS'.
LS_FCAT-INTTYPE   = 'C'.
LS_FCAT-OUTPUTLEN = '12'.
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
ENDFORM.                               " PREPARE_FIELD_CATALOG
*& Form SELECT_PO
Subroutine to select all the Purchase Orders
There are no interface parameters to be passed to this subroutine.
FORM SELECT_PO .
   SELECT EBELN                        " Purchasing Document Number
          ERNAM                        " Name of Person who Created
                                       " the Object
          LIFNR                        " Vendor's account number
          EKGRP                        " Purchasing group
          BEDAT                        " Purchasing Document Date
     FROM EKKO
PACKAGE SIZE 10000
APPENDING TABLE T_EBELN
    WHERE EBELN IN S_EBELN
      AND BEDAT IN S_BEDAT.
   ENDSELECT.
IF SY-SUBRC NE 0.
   W_FLAG = 1.
   MESSAGE S401(M8).
ENDIF.                                " IF SY-SUBRC NE 0
ENDFORM.                               " SELECT_PO
*& Form SELECT_OBJ_ID
Subroutine to select Object ID
There are no interface parameters to be passed to this subroutine.
FORM SELECT_OBJ_ID .
IF NOT T_EBELN IS INITIAL.
    SELECT OBJECTCLAS                  " Object Class
           OBJECTID                    " Object value
           CHANGENR                    " Document change number
           USERNAME                    " User name
           UDATE                       " Creation date
      FROM CDHDR
      INTO TABLE T_CDHDR
   FOR ALL ENTRIES IN T_EBELN
     WHERE OBJECTID EQ T_EBELN-EBELN
       AND UDATE IN S_UDATE
       AND TCODE IN ('ME21N','ME22N','ME23N').
   ENDSELECT.
   IF SY-SUBRC NE 0.
     W_FLAG = 1.
     MESSAGE S833(M8) WITH 'Header Not Found'(031).
   ENDIF.                              " IF SY-SUBRC NE 0.
ENDIF.                                " IF NOT T_EBELN IS INITIAL
ENDFORM.                               " SELECT_OBJ_ID
*& Form SELECT_CHANGED_VALUE
Subroutine to select Changed Values
There are no interface parameters to be passed to this subroutine.
FORM SELECT_CHANGED_VALUE .
IF NOT T_CDHDR IS INITIAL.
    SELECT OBJECTCLAS                  " Object class
           OBJECTID                    " Object value
           CHANGENR                    " Document change number
           TABNAME                     " Table Name
           FNAME                       " Field Name
           VALUE_NEW                   " New contents of changed field
           VALUE_OLD                   " Old contents of changed field
      FROM CDPOS
   PACKAGE SIZE 10000
APPENDING TABLE T_CDPOS
   FOR ALL ENTRIES IN T_CDHDR
     WHERE OBJECTCLAS EQ T_CDHDR-OBJECTCLAS
       AND OBJECTID   EQ T_CDHDR-OBJECTID
       AND CHANGENR   EQ T_CDHDR-CHANGENR.
    ENDSELECT.
    IF SY-SUBRC NE 0.
      W_FLAG = 1.
      MESSAGE S833(M8) WITH 'Item Not Found'(032).
    ENDIF.                             " IF SY-SUBRC NE 0.
ENDIF.                               " IF NOT T_CDHDR IS INITIAL
T_CDPOS_TEMP[] = T_CDPOS[].
ENDFORM.                               " SELECT_CHANGED_VALUE
*&   Form SELECT_PUR_DOC
   Subroutine to select Purchase Order Details
   There are no interface parameters to be passed to this subroutine.
FORM SELECT_PUR_DOC .
IF NOT T_CDPOS IS INITIAL.
    SORT T_EBELN BY EBELN.
    LOOP AT T_CDPOS INTO FS_CDPOS.
      READ TABLE T_EBELN INTO FS_EBELN WITH KEY EBELN =
                                      FS_CDPOS-OBJECTID BINARY SEARCH.
      IF SY-SUBRC NE 0.
        DELETE TABLE T_EBELN FROM FS_EBELN.
      ENDIF.                           " IF SY-SUBRC NE 0.
    ENDLOOP.                           " LOOP AT T_CDPOS...
    LOOP AT T_EBELN INTO FS_EBELN.
      MOVE FS_EBELN-EBELN TO FS_EKKO-EBELN.
      MOVE FS_EBELN-ERNAM TO FS_EKKO-ERNAM.
      MOVE FS_EBELN-LIFNR TO FS_EKKO-LIFNR.
      MOVE FS_EBELN-EKGRP TO FS_EKKO-EKGRP.
      MOVE FS_EBELN-BEDAT TO FS_EKKO-BEDAT.
      APPEND FS_EKKO TO T_EKKO.
    ENDLOOP.                           " LOOP AT T_EBELN...
    T_EKKO_TEMP[] = T_EKKO[].
ENDIF.                               " IF NOT T_CDPOS IS INITIAL
ENDFORM.                               " SELECT_PUR_DOC
*& Form SELECT_VENDOR
Subroutine to select Vendor details
There are no interface parameters to be passed to this subroutine.
FORM SELECT_VENDOR .
IF NOT T_EKKO IS INITIAL.
    SORT T_EKKO_TEMP BY LIFNR.
    DELETE ADJACENT DUPLICATES FROM T_EKKO_TEMP COMPARING LIFNR.
    SELECT LIFNR                       " Account Number of Vendor or
                                       " Creditor
           NAME1                       " Name 1
      FROM LFA1
      INTO TABLE T_LFA1
   FOR ALL ENTRIES IN T_EKKO_TEMP
     WHERE LIFNR EQ T_EKKO_TEMP-LIFNR.
   IF SY-SUBRC NE 0.
     MESSAGE S002(M8) WITH 'Master Details'(033).
   ENDIF.                              " IF SY-SUBRC NE 0.
ENDIF.                               " IF NOT T_EKKO IS INITIAL
ENDFORM.                               " SELECT_VENDOR
*& Form DESCRIPTION
Subroutine to get the description
There are no interface parameters to be passed to this subroutine.
FORM DESCRIPTION .
IF NOT T_CDPOS IS INITIAL.
    SORT T_CDPOS_TEMP BY TABNAME FNAME.
    DELETE ADJACENT DUPLICATES FROM T_CDPOS_TEMP COMPARING TABNAME FNAME
    SELECT TABNAME                     " Table Name
           FIELDNAME                   " Field Name
           ROLLNAME                    " Data element
      FROM DD03L
      INTO TABLE T_DATAELE
   FOR ALL ENTRIES IN T_CDPOS_TEMP
     WHERE TABNAME EQ T_CDPOS_TEMP-TABNAME
       AND FIELDNAME EQ T_CDPOS_TEMP-FNAME.
    IF NOT T_DATAELE IS INITIAL.
    T_DATAELE_TEMP[] = T_DATAELE[].
    SORT T_DATAELE_TEMP BY ROLLNAME.
    DELETE ADJACENT DUPLICATES FROM T_DATAELE_TEMP COMPARING ROLLNAME.
      SELECT ROLLNAME                  " Data element
             DDTEXT                    " Short Text Describing R/3
                                       " Repository Objects
        FROM DD04T
        INTO TABLE T_TEXT
     FOR ALL ENTRIES IN T_DATAELE_TEMP
       WHERE ROLLNAME EQ T_DATAELE_TEMP-ROLLNAME
         AND DDLANGUAGE EQ SY-LANGU.
      IF SY-SUBRC NE 0.
        EXIT.
      ENDIF.                           " IF SY-SUBRC NE 0.
    ENDIF.                             " IF NOT T_DATAELE IS INITIAL.
ENDIF.                               " IF NOT T_CDPOS IS INITIAL.
ENDFORM.                               " DESCRIPTION
*& Form FILL_OUTTAB
Subroutine to populate the Outtab
There are no interface parameters to be passed to this subroutine.
FORM FILL_OUTTAB .
SORT T_CDHDR   BY OBJECTCLAS OBJECTID CHANGENR.
SORT T_EKKO    BY EBELN.
SORT T_LFA1    BY LIFNR.
SORT T_DATAELE BY TABNAME FIELDNAME.
SORT T_TEXT    BY ROLLNAME.
LOOP AT T_CDPOS INTO FS_CDPOS.
    READ TABLE T_CDHDR INTO FS_CDHDR WITH KEY
                                   OBJECTCLAS = FS_CDPOS-OBJECTCLAS
                                   OBJECTID = FS_CDPOS-OBJECTID
                                   CHANGENR = FS_CDPOS-CHANGENR
                                   BINARY SEARCH.
      IF SY-SUBRC EQ 0.
        MOVE FS_CDHDR-USERNAME TO FS_OUTTAB-USERNAME.
        MOVE FS_CDHDR-UDATE    TO FS_OUTTAB-UDATE.
        READ TABLE T_EKKO INTO FS_EKKO WITH KEY
                                       EBELN = FS_CDHDR-OBJECTID
                                       BINARY SEARCH.
          IF SY-SUBRC EQ 0.
            MOVE FS_EKKO-EBELN TO FS_OUTTAB-EBELN.
            MOVE FS_EKKO-ERNAM TO FS_OUTTAB-ERNAM.
            MOVE FS_EKKO-LIFNR TO FS_OUTTAB-LIFNR.
            MOVE FS_EKKO-EKGRP TO FS_OUTTAB-EKGRP.
            MOVE FS_EKKO-BEDAT TO FS_OUTTAB-BEDAT.
            READ TABLE T_LFA1 INTO FS_LFA1 WITH KEY
                                           LIFNR = FS_EKKO-LIFNR
                                           BINARY SEARCH.
              IF SY-SUBRC EQ 0.
                MOVE FS_LFA1-NAME1 TO FS_OUTTAB-NAME1.
              ENDIF.                   " IF SY-SUBRC EQ 0.
          ENDIF.                       " IF SY-SUBRC EQ 0.
      ENDIF.                           " IF SY-SUBRC EQ 0.
    MOVE FS_CDPOS-VALUE_NEW TO FS_OUTTAB-VALUE_NEW.
    MOVE FS_CDPOS-VALUE_OLD TO FS_OUTTAB-VALUE_OLD.
    READ TABLE T_DATAELE INTO FS_DATAELE WITH KEY
                                         TABNAME = FS_CDPOS-TABNAME
                                         FIELDNAME = FS_CDPOS-FNAME
                                         BINARY SEARCH.
      IF SY-SUBRC EQ 0.
        READ TABLE T_TEXT INTO FS_TEXT WITH KEY
                                       ROLLNAME = FS_DATAELE-ROLLNAME
                                       BINARY SEARCH.
          IF SY-SUBRC EQ 0.
            MOVE FS_TEXT-DDTEXT TO FS_OUTTAB-DDTEXT.
          ENDIF.                       " IF SY-SUBRC EQ 0.
      ENDIF.                           " IF SY-SUBRC EQ 0.
    APPEND FS_OUTTAB TO T_OUTTAB.
    CLEAR FS_OUTTAB.
ENDLOOP.
ENDFORM.                               " FILL_OUTTAB
*&   Form GET_CELL_INFO
   Subroutine to get the Cell Information
--> W_VALUE   Holds the value of Hotspot clicked
FORM GET_CELL_INFO .
CALL METHOD W_GRID->GET_CURRENT_CELL
    IMPORTING
     E_ROW     =
      E_VALUE   = W_VALUE
     E_COL     =
     ES_ROW_ID =
     ES_COL_ID =
     ES_ROW_NO =
ENDFORM.                               " GET_CELL_INFO
*&   Form VALIDATE_PD_NUM
   Subroutine to validate Purchase Document Number
   There are no interface parameters to be passed to this subroutine.
FORM VALIDATE_PD_NUM .
IF NOT S_EBELN[] IS INITIAL.
    SELECT EBELN                       " Purchase Document Number
      FROM EKKO
      INTO W_EBELN
     UP TO 1 ROWS
     WHERE EBELN IN S_EBELN.
    ENDSELECT.
    IF SY-SUBRC NE 0.
      CLEAR SSCRFIELDS-UCOMM.
      MESSAGE E717(M8).
    ENDIF.                             " IF SY-SUBRC NE 0
ENDIF.                               " IF NOT S_EBELN[]...
ENDFORM.                               " VALIDATE_PD_NUM
*&   Form VALIDATE_VEN_NUM
   Subroutine to validate Vendor Number
   There are no interface parameters to be passed to this subroutine.
FORM VALIDATE_VEN_NUM .
IF NOT S_LIFNR[] IS INITIAL.
    SELECT LIFNR                       " Vendor Number
      FROM LFA1
      INTO W_LIFNR
     UP TO 1 ROWS
     WHERE LIFNR IN S_LIFNR.
    ENDSELECT.
    IF SY-SUBRC NE 0.
      CLEAR SSCRFIELDS-UCOMM.
      MESSAGE E002(M8) WITH W_SPACE.
    ENDIF.                             " IF SY-SUBRC NE 0
ENDIF.                               " IF NOT S_LIFNR[]...
ENDFORM.                               " VALIDATE_VEN_NUM
*&   Form VALIDATE_PUR_GRP
   Subroutine to validate the Purchase Group
   There are no interface parameters to be passed to this subroutine.
FORM VALIDATE_PUR_GRP .
IF NOT S_EKGRP[] IS INITIAL.
    SELECT EKGRP                       " Purchase Group
      FROM T024
      INTO W_EKGRP
     UP TO 1 ROWS
     WHERE EKGRP IN S_EKGRP.
    ENDSELECT.
    IF SY-SUBRC NE 0.
      CLEAR SSCRFIELDS-UCOMM.
      MESSAGE E622(M8) WITH W_SPACE.
    ENDIF.                             " IF SY-SUBRC NE 0
ENDIF.                               " IF NOT S_EKFRP[]...
ENDFORM.                               " VALIDATE_PUR_GRP
*& Form FILL_VARIANT
Subroutine to fill the Variant Structure
There are no interface parameters to be passed to this subroutine
FORM FILL_VARIANT .
Filling the Variant structure
W_VARIANT-REPORT = SY-REPID.
W_VARIANT-USERNAME = SY-UNAME.
ENDFORM.                               " FILL_VARIANT
Regards,
Pavan

How to fix certain characteristics in rows (permanent drill down)?

Hi,
Is it possible to fix certain characteristics in rows (ie., permanent drill down), and prevent user from remove it from the result? This requirement is needed for both BEx Reports and web reports.
Example:
Country Region Sales Amount
- Country and Region must always in rows, user should not remove these two characteristics, but can add drill down/across for other characteristics.
What I can think of is:
- For web report, do not show 'Country' and 'Region' in the Navigational Block, so that the user cannot do the drill down/across.
<b>- However, how to disable/hide the entry 'Remove Drilldown' in the context menu specifically for only Country and Region?</b>
- For Bex reporting, how?
Thanks.

You can move the cells for Country and reigon to a hidden area of the workbook so the user doesnot see them the the Filter area. Just drag them, and they will stay at the new location when the workbook is refreshed.

How to drill down from summary report to detail report using RRI?

Dear all:
A problem about RRI. Please help me!
1.I create a BEx query 'Q1' to show summary data.
2.I create a BEx query 'Q2' to show detail data.
3.In Q1, all the products are shown each row.
       The 1st coulmn is 'Balance in the begin', it shows how many customer claim cases are opened before this week.
       The 2nd coulmn is 'New', it shows how many customer claim cases are initalized in this week.
       The 3rd coulmn is 'Close', it shows how many customer claim cases are closed in this week.
       The 4th coulmn is 'Balance', it shows how many customer claim cases are still opened now. And this column is calculated by this fomula as follow:
         'Balance in the begin' + 'New' - 'Close'
   4.In Q2, it lists each customer claim case. Include ClaimNo, Sold-To Party, ProductNo...
   5. I set Q1 as sender, Q2 as receiver.
   6. If I focus on the value of 'New' or 'Close' and then go to 'Q2', the correspond detail calim information in 'Q2'. But it is fail if I focus on the value 'Balance'.
   Why?
Thanks,
Jolin

I don't know if you can use the hyperlink to call a subreport but the following has worked for me in Crystal 10:
1. In your main report create a group on the field you want to pass to the subreport.
2. In the Group Footer, use the "Insert Section below" menu command so that you have a Group Footer 1a and a Group Footer 1b.
3. Put your table fields in the Group Footer 1b section (this would be similar to your Details data).
4. Put the sub report in the Group Footer 1a section. Set up the links to the subreport from a table field in your main report.
5. Right-click on the sub-report, select "Format Sub-report". Click on the "x-2" button to the right of the Suppress option and enter "DrillDownGroupLevel = 0" in the "Formula Workshop-Formula Format Editor-Suppress" window and save it.
When you double-click on your data field (i.e. the field in Group footer 1b) it should drill-down and run your subreport.

How to get the output data of Standard drill down report into z-program?

HI every one,
        I want to get the output data of drill down report into z-program.
       Actually,if the output is only one, I can get into z-program,
      But, Here the report consists 3 alv outputs. when double clicking function happens, it will direct to another alv output.
    Those, all the outputs of report i want to get into z-program.
PLease , give reply as early as possible.
Thank u in advance,
karthik

HI,
When i download,only one output i will get.
But,if i double-click the particular record it will show another output. I want that output also.
Like that,when i double-click particular record, it will show some other alv ouput based on record,
i wanted all those outputs.
If i copy the code, whether i face any problems?

How to get back to Selection Screen from Drill Down Screen in ALV

Hi All
How can I come back directly to the Selection Screen from the drill down screen of an ALV Report i.e. in an Interactive ALV Report when sy-lsind > 1.
Thanks
Kulpreet

Try to use ....
SET SCREEN 0.
LEAVE SCREEN.
Regards,
Rich Heilman

How to set focus on particular object.

Hi All,
I'm using Sales Dilevery form. On this form i have added a textfield for barcode.
On Form load event I have set the focus on first textbox object i.e. customer code of the form by using the .click() method.
Now in the lost focus of a barcode, I am trying to make changes in the matrix data and it's working properly but my question is:
Once the changes made in the cell of a matrix, the focus should go again to the Barcode Textbox and not to the first object.
I'm trying this by making bubble event as FALSE. But nothing is happening.
Pl help me.
Thank you.
Best Regards.

Thank you for your reply.
No. I have not tried the .Active method.
But sure I will try and will let you know the result. But yes I have tried this with .Click() but still the focus goes to the other control.
Thank you

Example of how to create a master-multiple detail PDF report using BI Pub

Hi,
Are there any examples out there on how to do this? Basically for each master record from table A,
need multiple related detail records from table B AND multiple related detail records from table C.
Ie. A is master to B and A is master to C.
For master-single detail reports, writing a single query that joins master to detail works fine,
but for master-multiple detail reports, I don't see how this approach will work.
Thanks,
Jed

You MIGHT have a better response if you ask this question in the BI Publisher forum...: BI Publisher
Thank you,
Tony Miller
Webster, TX
There are two kinds of pedestrians -- the quick and the dead.

SSRS- Drill down to sub report of a bar chart on click on a particular color of the bar

Hi,
I have a bar chart which can have many colors on each bar, Now if i click on a bar, i am getting all the data related to that particular bar. Is it possible to click only on a particular color and get related data instead of whole bar?
To be more precise, in the below image if i click on 16/6/2013 bar, i am getting all the data related to the bar, but is it possible to click on red and green colors of the bar separately and get the relevant data? Any help is greatly appreciated.
Kruthi Hegde

Hi Kruthi,
In your case, you can use “Go to report” property to solve the issue.
Suppose we have a dataset (DataSet1) in main report and subreport with following fields: Months, DateTime, Amount. We can according to Months and DateTime fields to display the subreport. Please refer to the steps below:
Subrepot:
Add dataset (DataSet2) in the report with Months field.
Add dataset (DataSet3) in the report with DateTime field.
Add two parameters in the report. Please refer to the following Available Values:
Months:
Dataset: DataSet2
Value field: Months
Label field: Months
DateTime:
Dataset: DataSet2
Value field: DateTime
Label field: DateTime
Add filters in the tablix.
Main report:
Right click the bar chart, select Series Properties.
Click Action in the left pane, select “Go to report” option.
Specify the corresponding report.
Click Add icon to add parameters to run the report:
Name: Months Value: [Months]
Name: DateTime Value: [DateTime]
(Note: If we want subreport display these data which is only relevant with color, we can delete DataTime parameter in the report.)
If you have any questions, please feel free to let me know.
Regards,
Alisa Tang
Alisa Tang
TechNet Community Support

How to pre-populate the sender's mail and attach a pdf report.

I mean....supppose i want to prepopulate the senders email field in a email dialogue box and the have an option to attach a report to the mail...so that a mail can be sent to the senders mail id as well as the recepients id.

Actually .....how should i do this in Flex......i mean the process...and that too...how to retrieve the email of the person who has logged in??

HOW TO ADD DRILL DOWN IN A REPORT

hi
well i want to add drill down in my report....
im unable to find it ....
can you please help me to make a drill down in my report.
thnx and regards
UMAR NAYAB.

hey thnx toronto..
im able to make drill in my report....
now my chart is not changing its data according to drill.....
like my bar chart should also change with the data drilled down....
please help regarding this....
regards.

How to make column headers in table in PDF report appear bold while datas in table appear regular from c# windows forms with sql server2008 using iTextSharp

Hi my name is vishal
For past 10 days i have been breaking my head on how to make column headers in table appear bold while datas in table appear regular from c# windows forms with sql server2008 using iTextSharp.
Given below is my code in c# on how i export datas from different tables in sql server to PDF report using iTextSharp:
using System;
using System.Collections.Generic;
using System.ComponentModel;
using System.Data;
using System.Drawing;
using System.Linq;
using System.Text;
using System.Threading.Tasks;
using System.Windows.Forms;
using System.Data.SqlClient;
using iTextSharp.text;
using iTextSharp.text.pdf;
using System.Diagnostics;
using System.IO;
namespace DRRS_CSharp
public partial class frmPDF : Form
public frmPDF()
InitializeComponent();
private void button1_Click(object sender, EventArgs e)
Document doc = new Document(PageSize.A4.Rotate());
var writer = PdfWriter.GetInstance(doc, new FileStream("AssignedDialyzer.pdf", FileMode.Create));
doc.SetMargins(50, 50, 50, 50);
doc.SetPageSize(new iTextSharp.text.Rectangle(iTextSharp.text.PageSize.LETTER.Width, iTextSharp.text.PageSize.LETTER.Height));
doc.Open();
PdfPTable table = new PdfPTable(6);
table.TotalWidth =530f;
table.LockedWidth = true;
PdfPCell cell = new PdfPCell(new Phrase("Institute/Hospital:AIIMS,NEW DELHI", FontFactory.GetFont("Arial", 14, iTextSharp.text.Font.BOLD, BaseColor.BLACK)));
cell.Colspan = 6;
cell.HorizontalAlignment = 0;
table.AddCell(cell);
Paragraph para=new Paragraph("DCS Clinical Record-Assigned Dialyzer",FontFactory.GetFont("Arial",16,iTextSharp.text.Font.BOLD,BaseColor.BLACK));
para.Alignment = Element.ALIGN_CENTER;
iTextSharp.text.Image png = iTextSharp.text.Image.GetInstance("logo5.png");
png.ScaleToFit(105f, 105f);
png.Alignment = Element.ALIGN_RIGHT;
SqlConnection conn = new SqlConnection("Data Source=NPD-4\\SQLEXPRESS;Initial Catalog=DRRS;Integrated Security=true");
SqlCommand cmd = new SqlCommand("Select d.dialyserID,r.errorCode,r.dialysis_date,pn.patient_first_name,pn.patient_last_name,d.manufacturer,d.dialyzer_size,r.start_date,r.end_date,d.packed_volume,r.bundle_vol,r.disinfectant,t.Technician_first_name,t.Technician_last_name from dialyser d,patient_name pn,reprocessor r,Techniciandetail t where pn.patient_id=d.patient_id and r.dialyzer_id=d.dialyserID and t.technician_id=r.technician_id and d.deleted_status=0 and d.closed_status=0 and pn.status=1 and r.errorCode<106 and r.reprocessor_id in (Select max(reprocessor_id) from reprocessor where dialyzer_id=d.dialyserID) order by pn.patient_first_name,pn.patient_last_name", conn);
conn.Open();
SqlDataReader dr;
dr = cmd.ExecuteReader();
table.AddCell("Reprocessing Date");
table.AddCell("Patient Name");
table.AddCell("Dialyzer(Manufacturer,Size)");
table.AddCell("No.of Reuse");
table.AddCell("Verification");
table.AddCell("DialyzerID");
while (dr.Read())
table.AddCell(dr[2].ToString());
table.AddCell(dr[3].ToString() +"_"+ dr[4].ToString());
table.AddCell(dr[5].ToString() + "-" + dr[6].ToString());
table.AddCell("@count".ToString());
table.AddCell(dr[12].ToString() + "-" + dr[13].ToString());
table.AddCell(dr[0].ToString());
dr.Close();
table.SpacingBefore = 15f;
doc.Add(para);
doc.Add(png);
doc.Add(table);
doc.Close();
System.Diagnostics.Process.Start("AssignedDialyzer.pdf");
if (MessageBox.Show("Do you want to save changes to AssignedDialyzer.pdf before closing?", "DRRS", MessageBoxButtons.YesNoCancel, MessageBoxIcon.Exclamation) == DialogResult.Yes)
var writer2 = PdfWriter.GetInstance(doc, new FileStream("AssignedDialyzer.pdf", FileMode.Create));
else if (MessageBox.Show("Do you want to save changes to AssignedDialyzer.pdf before closing?", "DRRS", MessageBoxButtons.YesNoCancel, MessageBoxIcon.Exclamation) == DialogResult.No)
this.Close();
The above code executes well with no problem at all!
As you can see the file to which i create and save and open my pdf report is
AssignedDialyzer.pdf.
The column headers of table in pdf report from c# windows forms using iTextSharp are
"Reprocessing Date","Patient Name","Dialyzer(Manufacturer,Size)","No.of Reuse","Verification" and
"DialyzerID".
However the problem i am facing is after execution and opening of document is my
column headers in table in pdf report from
c# and datas in it all appear in bold.
I have browsed through net regarding to solve this problem but with no success.
What i want is my pdf report from c# should be similar to following format which i was able to accomplish in vb6,adodb with MS access using iTextSharp.:
Given below is report which i have achieved from vb6,adodb with MS access using iTextSharp
I know that there has to be another way to solve my problem.I have browsed many articles in net regarding exporting sql datas to above format but with no success!
Is there is any another way to solve to my problem on exporting sql datas from c# windows forms using iTextSharp to above format given in the picture/image above?!
If so Then Can anyone tell me what modifications must i do in my c# code given above so that my pdf report from c# windows forms using iTextSharp will look similar to image/picture(pdf report) which i was able to accomplish from
vb6,adodb with ms access using iTextSharp?
I have approached Sound Forge.Net for help but with no success.
I hope anyone/someone truly understands what i am trying to ask!
I know i have to do lot of modifications in my c# code to achieve this level of perfection but i dont know how to do it.
Can anyone help me please! Any help/guidance in solving this problem would be greatly appreciated.
I hope i get a reply in terms of solving this problem.
vishal

Hi,
About iTextSharp component issue , I think this case is off-topic in here.
I suggest you consulting to compenent provider.
http://sourceforge.net/projects/itextsharp/
Regards,
Marvin
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to go to a particular object in drill down detail pdf report?

Similar Messages

Maybe you are looking for