How to go to display mode from VA05? Thanks.

I have a question on VA05. There is order list and it go to change mode when you  double click on certain entry. But most of time we just want to view the order. How to direct it to display mode from here? Thanks.

Hi ,
I think thats the std functionality and it cannot be changed. You will have to build a custom report to do the same and enable forward navigation to display transaction va03.
Cheers
VJ

Similar Messages

  • How to set "display mode" from external keyboard

    I have an EliteBook 8570p in a docking station, with an external monitor and keyboard attached.
    I typically have my display mode as "duplicate", with the same thing  showing on both my laptop screen and external monitor.  I use the external monitor as the main screen. This might be uncommon, but I prefer it this way.  I've been working this way for quite a while.
    I very recently started using MS PowerPoint 2013.  Today I discovered an annoying bug with this combination.  I was in "slideshow mode" for a pptx I was working on, and I pressed ESC to get back to editing the doc.  What happened was that the external monitor just showed my background wallpaper, and the laptop screen showed the normal display, along with my background wallpaper.  I then had to slide over to my laptop keyboard and press Fn-F4 and set it to "Duplicate", and that restored my external monitor display.
    I'm definitely going to pursue this weird behavior with PowerPoint, but I'm going to assume out of the box that this will be difficult to change.  What I'd like to get from this forum is simply a quicker way to restore the "Duplicate" display mode.  Is there a keyboard shortcut I can use from my external keyboard to change the display mode?  There's no "Fn" key.

    Although I'd still like to get an answer to this, my original problem has been solved, as I was able to disable the feature in PowerPoint 2013 that mucked with my display mode (turn off "Use Presenter View").

  • Determining Edit/Display Mode from Within Freestyle Component

    I am new to FPM.  We are running ESS.
    I have enhanced a new Web Dynpro Component onto an Edit page of an OVP (as a Freestyle Component).
    I want the new WDC to behave differently based on the mode I am in.
    How, from within the new WDC, can I tell if I have entered the Edit page in Edit (pencil) or Display mode?
    Thanks...
    ...Mike

    Hello Mike,
    Firstly, welcome to the wonderful world of FPM
    Well, usually with FPM, you have an Edit (or Read-only) button in the top, underneath the title (Identification Region, IDR). This, being standard, has some standard FPM events behind it.
    In your freestyle WD component, you implemented IF_FPM_BUILDING_BLOCK interface, and with it you have some additional methods in your COMPONENT CONTROLLER, such as FLUSH, PROCESS_EVENT, and so on...
    In your PROCESS_EVENT method, you can basically catch all FPM events at application level. Usually you have a big CASE, something like:
    case io_event->mv_event_id.
         when ...
         when 'FPM_EDIT'. "you can find some constants behind CL_FPM_EVENT=>GC... Right now I'm not sure how it's called exactly. But it's advised to use this constants!
              You can write your code here in order to change the behavior, basically, you can do whatever.
              also, it's the same with 'FPM_READ_ONLY'
         when others.
              return.
    endcase.
    I strongly recommend you download the latest version of FPM Cookbook, or the one that is suited with your SAP NW version.
    FPM Developer's Handbook SAP NetWeaver 7.03/7.31 SP4
    Hope I made things a little more clear!
    Tudor

  • Help, how to open and display blobs from tables

    Dear all,
    I am trying to store ms-word files on a table using a blob column.
    Does anyone how to open the files and display them from a form using 9iAS?
    Thank you.
    Carlos.

    And there may be, but you won't likely find that here. Do some time searching Google and maybe you'll find code that someone was nice enough to make freely available, although I wouldn't count on it. Were i a programmer and took the time to read those docs and write the code, I'd want to be paid for my time. But there are a lot of programmers who swear by freeware! You may get lucky.

  • How to activate Target Display Mode on iMac 27", Late 2009?

    Hi all,
    I'm trying to use my iMac as a display for my PC. Unfortunately I can't activate the iMac's Target Display Mode (TDM) through a DVI-to-miniDisplayPort cable.
    As far as I know, the TDM exists on my iMac (27 inch, Late 2009).
    I am following these steps:
    (1) start the iMac,
    (2) start the PC,
    (3) press Cmd+F2,
    but nothing happens on the iMac (as if I didn't press anything).
    The PC's DVI output works on another screen, though.
    Here are my settings:
    - iMac: 27 inch, Late 2009, 2.8 GHz Intel Core i7 with miniDisplayPort, OS X 10.8.4 (12E55)
    - PC: Gigabyte's GTX 770 graphic card with DVI-I output, Windows 8 fully updated
    - between the two: DVI-D cable plugged into Apple's DVI-to-miniDiplayPort adapter
    Any advice?
    Thanks a lot :-)

    Please very carefully read:
    support.apple.com/kb/ht3924
    In it you will see that TDM only works on a late 2009 iMac in Mini Display Port to Mini Display Port, no other configurations will work. If your iMac is an early 2009 iMac (please check the Tech Specs for each on Apple's website) TDM is not supported on that model.

  • How to store and display Response from REST Service

    Hi,
    My WADL has defined the response that my REST service returns back as below :
    <object name="Get_Root">
            <property name="RequestId" type="number" />
            <property name="Name" type="string" />
            <property name="fromPlace" type="string" />
            <property name="toPlace" type="string" />
            <property name="fromDate" type="string" />
            <property name="toDate" type="string" />
    </object>
    I want to store this response; response is a single entry of the above type and not a collection (I am making the request on a button click) and then display it on the screen in multiple labels.
    How can I do this? Will I have to use a collection and a gallery, even though I have a single response?
    Thanks,
    Pragya

    Okay.. got it. So MyRestData has a Get function taking some n arguments and it responds back with an object of the type I had mentioned before.
    From what I understood, I have to write the below code for each label
    MyRestData!Get(.....)!Name
    MyRestData!Get(.....)!fromPlace
    MyRestData!Get(.....)!toPlace ...and so on
    Wouldn't that translate to different REST calls? Is there a way to get and store the entire response object
    in the app and access each of its properties/subelements locally?
    Also when you wrote the below before
    Text: "The name is: " &  MyRestData!Get_Root!Name
    it seems that I can access the response object Get_Root using MyRestData. This is not the case for me. MyRestData only lets me access the Get function using "!", and not the response object in any way.
    Thanks for your help!

  • How to control and display video from IP camera using ActiveX control over Internet.

    Hello,
    I need to control my IP cameras over the internet. I need to log into the cameras and then display the video.  There's an ActiveX control registered on the computer and works fine with IE to access and control the cameras. Controlling the cameras using IE works fairly well, but there are some quirks that I'd like to eliminate by using my own custom code.
    Has anyone created a vi that controls a Foscam FI8905W over the Internet? I’ve attempted, but I keep getting a catastrophic failure when I try to call ManagementConnect Method in the DVM_IPCam2 ActiveX Control Module V1.0. I'm not sure whether I need to establish an IP connection with the cameras first, or allow the ActiveX control to establish it for me.
    Some example code would be greatly appreciated. Running LabVIEW 2011 on a Win7 32bit.  Even some code used to control a similar device using ActiveX over Internet would be helpful.

    I have an example vi for interfacing to the foscam activex.
    I plan on using mouse click events within the activex window to trigger the PT function.
    I only have the basic up/down/right/left directions and not the down-right/down-left/up-right/up-left in the enum.  You can load the camera's web page and view the source to see the Java script code that uses the activex control.  There are definitions for the other directions.
    I had to mark the control as "Disabled" to keep click events from going to the activex control.  If I double click the control, it goes full screen.  If I then click on it to get out of full screen mode the video never returns or returns to the wrong spot in the VI.
    Attachments:
    Foscam Demo.vi ‏24 KB

  • How to move to GUI mode from Console mode in Solaris 10

    Hai gusys...
    I have installed solaris 10 to my computer and it installed successfully...
    the thing is in i can not move to gui mood from the console mode...
    Any one can help me out to solve this task...
    Thanks...

    This is curious, since a simple program similar to what is described is known to work. I've modified the standard sample program examples/cxx/EnvExample.cpp C++ to use an in-memory database, DB_SYSTEM_MEM, and DB_TXN_NOSYNC. The "Device busy" symptom occurs if the close of the environment handle is bypassed. I have not been able to reproduce the DB_RUNRECOVERY error.
    How does the program's use of Berkeley DB different from what is provided in EnvExample.cpp?
    Is it possible to send me the relevant portions of it?
    Regards,
    Charles Koester
    Oracle Berkeley DB

  • Using Oracle 11g How to change the Log mode from NoArchieve to Archieve Log

    Hi,
    I currently using oracle 11g How can I change database from NoArchivelog node to Archivelog node using spfile.
    And where exactly the spfile will be located?
    My instance is EPM11 in my local oracle is present in D folder where can i found the pfile?
    In this path i found 1 pfile in my Local Machine
    "D:/Oracle/Product/11g/admin/epm11/pfile" .I have added the following commands in this pfile
    # Archive Log Destinations -benr(10/15/04)
    log_archive_dest_1='location=/u02/oradata/cuddle/archive'
    log_archive_start=TRUE
    Then i have ran the shutdown command.
    Database instance is showtdown.
    After that i am not able to perform startup.
    So please suggest me how to change the mode using SPfile and tell me the path where spfile and pfile should be located?
    And also do i need to set the "Oracle_Home" path in my environment variables"
    Thanks In Advance,
    Chandana

    user11225122 wrote:
    Hi,
    I currently using oracle 11g How can I change database from NoArchivelog node to Archivelog node using spfile.
    And where exactly the spfile will be located?
    My instance is EPM11 in my local oracle is present in D folder where can i found the pfile?
    In this path i found 1 pfile in my Local Machine
    "D:/Oracle/Product/11g/admin/epm11/pfile" .I have added the following commands in this pfile
    # Archive Log Destinations -benr(10/15/04)
    log_archive_dest_1='location=/u02/oradata/cuddle/archive'
    log_archive_start=TRUE
    Then i have ran the shutdown command.
    Database instance is showtdown.
    After that i am not able to perform startup.
    So please suggest me how to change the mode using SPfile and tell me the path where spfile and pfile should be located?
    And also do i need to set the "Oracle_Home" path in my environment variables"
    Thanks In Advance,
    Chandanaremove log_archive_start=TRUE from pfile (it is depricated from 10g onwards)
    SQL>startup nomount pfile="D:/Oracle/Product/11g/admin/epm11/pfile/initYOUR_SID_NAME.ora"
    SQL>Create spfile from pfile="D:/Oracle/Product/11g/admin/epm11/pfile/initYOUR_SID_NAME.ora"
    SQL>SHUT IMMEDIATE;
    SQL>STARTUP MOUNT
    SQL>ALTER DATABASE ARCHIVELOG;
    SQL>ALTER DATABASE OPEN;
    SQL>ARCHIVE LOG LIST;
    SQL>SHOW PARAMATER SPFILE;
    YOU WILL FIND THE LOCATION OF SPFILE
    SQL>

  • How to retrieve and display image from database in a web page

    Hi all;
    I have been trying this for some time now. I have found some tutorials so far but none of them addresses my concern. Here it is:
    I have built a web application that can connect to an Oracle DB.
    I have a table called "employee", where I record any employee details, among which the employee picture. I stored the pictures and the finger prints using "Oracle sql developper" as blob type.
    How can i retrieve and view all these information when i run the application?
    I can easily retrieve all other types of value, but the image(BLOB type) has been a nightmare for me.
    HELP PLEASE.

    morgalr wrote:
    I believe your Binary Large Obejct will come back as an array of int, and you'll need to use BufferedImage it's associated API to get it to a viewable image configuration.I don't think BufferedImage immediately solves the problem -- this is a web app, so I assume the image will be displayed using the HTML IMG tag.
    Solution: google. There are many example of how to do this. For example, any book on servlets will have an example of dishing up a dynamic image.

  • How to acquire and display data from labview to excel simultaneo​usly

    hello,
    I am using the NI-DAQ to measure the falling edges of a clock and display them into a table. What I need is to display these data in a table in excel while the program is running. In addition, when I receive a pulse from an external clock, for which I have created a digital channell, the data must be logged in a different column. In other words, every time I receive a pulse the data must be stored in the adjacent column in excel.

    Hello Evangelos,
    As far as I know and have experienced, it is not possible to access a spreadsheet file (or any file, for that matter) by two programs at the same time, you will get an error.
    Also, a couple of observations on your code:
    A constant wired to a case selector of a case structure makes no sense as the false case will never be executed.
    Move the DAQmx Read from your Digital Input task into the while loop, as the DAQmx Read will only read once and the wire won’t get information in or out of a while loop as long as the while loop is iterating.
    Regards,
    Daniel REDS
    RF Systems Engineer
    Help us grow.
    If a post solves your question, mark it as The Solution.
    If a post helps, give Kudos to it.

  • How to decode and display jpeg from a bytes stream ?

    Hello.
    I am new to Flex and got stuck on something that I assume has an easy solution.
    I have an RIA application in which I want to display a jpeg image. this image was
    sent on a Web Service message,  as an array of bytes (I just read the jpeg file as
    is and send it to the web application).
    I couldn't figure out a way to decode and display this image at the RIA, using an apropriate component. (Image ?)
    I have seen a few examples where a jpg is loaded from a web server using a url in
    which it's avaliable, but I don't think this is much help to me...
    Your help/example apreciated.

    Thanks.
    I assume you mean passing the bytesArray to Image.load() ?
    Anyway, that's what I did and it worked fine.
    Now I am facing the same issue with playing sounds, which are available on bytesArray.
    I tried to pass the mp3 bytes to the Sound.load(), but it doesn't work, becuase it tries
    to cast it to a URL. do you know by any chance  whether I can achieve that somehow ?
    (I could use prety much any other sound format, if it makes a difference)
    Thanks again.

  • How to enable/disable archive mode from the pfile in oracle 10g?

    hi
    I am using oracle 10g.
    Is there any mechanism to / parameter to enable or disable archive log mode?
    can I enable arching directly from pfile without touching the startup process??
    pls help.
    thnx in advance..

    Please is not in pfile that you enable/disable archive log mode.
    For ENABLE Archivelog mode:
    shutdown immediate
    startup mount
    alter database archivelog;
    alter database open;
    For DISABLE Archivelog mode:
    shutdown immediate
    startup mount
    alter database noarchivelog;
    alter database open;

  • HOW TO have LOV display values from a table not contained in parsing schema

    I am using DAD to log in and have been able to get around the problems associated with the login schema being different than the parsing schema. However, I want to have a list of values to be shown to the user based on a table in the DAD schema that they log into rather than the parsing schema.
    Anyone know how this might be done?

    GOT IT:
    RETURN 'select xxxxxxx' does it

  • How to keep full screen mode from blacking out 2nd screen with dual screens in windows

    anyone know how to do this its been driving me crazy for years.

    I can't get either Acrobat 9 Pro or Reader X to do this and I tried with several PDFs. Unchecked, nothing advances automatically. Maybe someone else has some insite.

Maybe you are looking for