How to grab image?

Hi everyone.
I make an export plugin
I try to save image to the file.
Have a few question:
1. Is it possible to use SPActionControlSuite in export plugin? it returns error when i try to AcquireSuite..
2. In my test i try save HBITMAP from HDC from gExportRecord->displayPixels to file using CxImage. But I always have a black filled rect in file.. How can I get HBITMAP or save layer/or whole image to the file from export plugin?
wbr Dmitry

You already have lots of examples in the SDK.
For JPG, BMP, or PNG you should just use Photoshop to save.
For other formats, you could write a format plugin, or an export plugin.
If you know C, it should take you 10 minutes or less to modify one of the example plugins.

Similar Messages

  • How to Snap/Grab Image from 1394 camera and display the Image in CWIMAQVIEWER in VC++ ?

    Hi,
    I have :  -  IMAQ1394 2.0.1
                  -  NI Vision 7.1
    In VB, I can Snap/Grab Image from 1394 camera and display the Image in CWIMAQVIEWER :
        Dim Image0 As New CWIMAQImage
        imaq1394SnapCW(sid0,Image0)
        CWIMAQViewer1.Attach Image0
    Now,How can I do this in VC++6.0?
        I tried:
                  C_CWIMAQImage m_imgViewer1;
                  m_imgViewer1 = m_CWIMAQVision1.CreateCWIMAQImage();
                  m_CWIMAQViewer1.Attach(m_imgViewer1);
                  imaq1394SnapCW(Sid,m_imgViewer1);  <--there is no "imaq1394SnapCW "function in VC++,why?
        Please help me!
        Thank you!

    For people looking back at these old posts regarding
    CWIMAQViewer - it was not made to be used in the C environments and is made
    for VB.
    Refer to the following locations for displaying images in C
    environments:
    Start»All Programs»National Instruments»Vision»Documentation
    Start»All
    Programs»National Instruments»Vision»Text Based Examples
    Make
    sure that you look at the examples and documentation that is in
    reference to the C environments not the VB environments
    Vince M
    Applications Engineer

  • Lv 8.2 grab image

    Hi,
    i am beginners in labview version 8.2
    i would like to acquires set of images (grab/sequence) of my experiment, with external trigger.
    i tried to use with the exist example of grab and save to avi and
    sequence and save to avi, but i couldn't succeed to get whatever i am
    looking for.
    please if you can to give me orientation, and if there is possibilities to write it to different type of file (instead avi)
    thanks
    Reut

    Dear Reut,
    You are on the right track! Based on what you have posted about your application thus far, I would suggest taking a look at the Grab and Save to AVI example that ships with LabVIEW. With this VI you can save your grabbed images to an AVI file. Some things to note:
    1. You will still need to do a triggered grab. The rate at which you grab images from the camera will specify how many fps will be written to the AVI file. This is different from the Frames Per Second input to the IMAQ AVI Create VI. The input to the IMAQ AVI Create VI will specify at how many fps the AVI will play back when you open it, say in Windows Media Player.
    For example, say you set up a triggered grab to capture images at 4 fps, and you specify the Frames Per Second input to the IMAQ AVI Create VI to be 16 fps. With these parameters, you will be saving 4 frames to your AVI file every second while your program is running. When you open the AVI after stopping your application, the AVI will play back at 16 fps, even though you acquired at 4 fps. In effect, your video will be played at 4X fast forward speed.
    2. Depending on how long you will be running your application, and what you will need to do with the AVI afterwards, you should consider compressing to the AVI file. Here is a good KnowledgeBase that discusses AVI compression in LabVIEW:
    Writing a Compressed AVI File with IMAQ Vision
    http://digital.ni.com/public.nsf/allkb/0A4D5BF47FD3FF0186256E9A004FD671?OpenDocument
    Please post back if you have additional questions or run into problem with the implementation of your application.
    Best Regards,
    ~Nate

  • GigE camera - grab image with black bars

    Hi everyboby,
    I am using Ni vision acquisition to grab images from a GigE camera.
    I recieve images just as I trigger the camera - so fare so good.
    Every other picture shows some black bars.
    Does anyone has an idea what it could be?
    It's not the hardware, the camera works perfect with the SDk form the manufacturer.
    Thanx for any help
    Solved!
    Go to Solution.

    Sounds like an incomplete frame, this could be caused by missing packets.  To prevent missing packets during acquisition you can do two key things: ensure the packet size configured on the camera does not exceed what the network adapter can handle, and ensure that the bandwidth of image data being output by the camera does not saturate interface bandwidth.  I would lower camera packet size to 1500 initially to determine if the packet size  is the cause of the problem.  You can throttle how much data the camera can send by manipulating the interpacket delay, some manufacturers have a very handy feature called StreamBytesPerSecond.  Depending on which mechanism you can use, increase interpacket delay or reduce StreamBytesPerSecond.

  • How to Call Image Viewer from Form application

    Hi,
    how to call Image viewer using host command on oracle form 6i.
    i trying using host command on local/client application .. and it is working ...
    but when i try on server application (EBS - UNIX) it does not working ...
    thanks ..
    regards,
    safar

    Are you using Forms 6i in client/server mode or web deployed? I'm not sure what you mean by 'try on server application"
    Remember that when using a web deployed architecture, a host command will execute the command on the Forms application server, NOT on the client.
    To execute host commands on the client you would have to use WebUtil, but that's not available for Forms 6i. Perhaps there are PJC's out there that can do it for you, but I don't want to get in all those details without me knowing if it is relevant for you.

  • How to use images from ADFLib

    Hello OTN,
    My application is devided into several ADFLibs, one of them is CommonUI. It includes common skin and it is imported into every application part.
    There are some images which should be available in different parts, so I decided to put them in CommonUI.
    After deploying adflibCommonUI adn refreshing Resource Palette, somehow I expected to see this image there, but it isn't.
    Could someone, please, explain me, how to use images contained in imported ADFLib, for example, as imageLink icon?
    Thanks.
    ADF 11.1.2.1

    Hi,
    images need to be saved in a specific file structure in the JAR file to be accessible. See:
    http://www.oracle.com/technetwork/developer-tools/adf/learnmore/86-images-from-jar-427953.pdf
    Frank

  • How do you  "image correction" in PREVIEW in a macbook pro? I have an iBook G4 that gives it as an option in the tools drop down window.

    how do you  "image correction" in PREVIEW in a macbook pro? I have an iBook G4 that gives it as an option in the tools drop down window.

    From preview:
    Tools-> Adjust Color-> Auto Levels
    Or you can import the image into iPhoto:
    Edit-> Enhance

  • How to store image in the oracle database 10.2.

    Hi.,
    I am working on 10g ids. I have designed a form where there are two fields. Name and picture.
    I want to keep details of the person with their photo.
    I can simply put name but how to insert image in the picture field??
    can you suggest ??
    Thanks.
    Shyam

    Hi
    To store your binary images in an Oracle database, you will need to create a column in your table defined with the BLOB datatype BLOB stands for Binary Large Object. Images from scanners, mpeg files, movie files and so on can all be stored in the BLOB column
    sq>CREATE TABLE test_table (
       id NUMBER,
       image BLOB);then go to
    [http://download-west.oracle.com/docs/cd/B14117_01/appdev.101/b10796/toc.htm]

  • How to copy images from another MC in reversed order??

    Hi everyone,
    I'm new to AS3 and have been fighting and searching for a solution to this problem for a week now, and I'm VERY close!
    I crated a MC holding of a series of images (about 50) and I jump around in it using plenty AS3 scripts (most of which I don't fully understand yet, but I'm working on that to! )
    I had to find a way to "rewind" (= play backwards) the MC. Since there is a stop(); command in almost every frame, prevFrame does not work and if I put that in a loop, it goes WAY to fast (but worked).. So I could think of only one way...
    Create a new (reverserd) MC with the same image sequence ald reverse it manually and play that one.
    This all works fine (very proud of it ).
    Now my question:
    To get this to work for multiple image sequences, I have to load all images twice (once in MC_1 and again in MC_2 and select them and reverse them).
    Not a big one, unless you want to create MANY of those SWF's...
    Is it possible to load the 50 images of the first MC in reverse into the second MC dynamically? JUST the images, noting else.
    extra info: the MC_2 is already in the lib(empty) and placed on the stage.
    something like:
    var pointer:Number=1;
    for (var:i:Number=50;i>=0;i--) {
    get MC_1.picure(var);
    put it in MC_2.frame(pointer);
    pointer = pointer + 1;
    All help is welcome and please take into account that I have little experience and copy most of my scripting from people like you
    T.I.A.
    Melluw

    I tried your advice (thanks for that)
    The event I already have is the mouse leave
    I //-d out the part I removed (what did work)
    The code I ended up with is:
    function Start() {
    stage.addEventListener(Event.MOUSE_LEAVE, cursorHide);
    function cursorHide(evt:Event):void {
    var currFrame = MC_1.currentFrame;
    if (CCW == true) {  //it is true in this case
      movStart = (50 - currFrame);
    else {
      movStart = currFrame;
    if (movStart>25) {
      MC_1.prevFrame();
    // removed swapChildren(MC_1, MC_2); // This is the part I removed
    // removed MC_2.gotoAndPlay(movStart);
    else {
      MC_1.gotoAndPlay (movStart);
    And if I leave the stage on the part where movStart is indeed >25
    Nothing happens,
    So I guess this is not what you meant
    Subject: Action Script 3 how to copy images from another MC in reversed order??
    I cannot direct you in the loading of the images approach, it will be too complicated, and will probably not work anyways... when you move away from a frame that has dynamic content, you lose the content.  So basically, there is nothing practical in taking that approach.
    I do niot understand what the problem will be with the enterFrame/prevFrame approach. If everything you can do with the mouse is already used (which I doubt) by the first mc, then there is nothing else you can do with this file.  You probably just need to rethink your control scheme.  You should search Google for "AS3 slideshow tutorial", and to lighten up your design, add "XML" in that search.
    >

  • How to insert image in forms?

    Hi Friends,
    I m new to Forms. plz tell me how to display image in canvas (form)?
    I m using Forms 6i.

    do you want to show a static image or an image from the database?
    If its a static image have at look at this Re: Oracle FORMS with image background, is that possible?
    If its a database image you should have a table with a blob-column. If you use the databalock wizard and include that column in the block, it will generate you an image-item which can then be shown in the layout.
    Edited by: Andreas Weiden on 25.11.2008 21:58

  • Hello, i am new to the mac and i need to learn how to re image using an external hard drive

    Hello, i am new, like baby fresh new,...lol, to the mac and i need to learn how to re-image using an external hard drive.

    How to replace or upgrade a drive in a laptop
    Step One: Repair the Hard Drive and Permissions
    Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    Step Two: Remove the old drive and install the new drive.  Place the old drive in an external USB enclosure.  You can buy one at OWC who is also a good vendor for drives.
    Step Three: Boot from the external drive.  Restart the computer and after the chime press and hold down the OPTION key until the boot manager appears.  Select the icon for the external drive then click on the downward pointing arrow button.
    Step Four: New Hard Drive Preparation
    1. Open Disk Utility in your Utilities folder.
    2. After DU loads select your new hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area.  If it does not say "Verified" then the drive is failing or has failed and will need replacing.  Otherwise, click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID  then click on the OK button. Click on the Partition button and wait until the process has completed.
    4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
    6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
    Step Five: Clone the old drive to the new drive
    1. Open Disk Utility from the Utilities folder.
    2. Select the destination volume from the left side list.
    3. Click on the Restore tab in the DU main window.
    4. Check the box labeled Erase destination.
    5. Select the destination volume from the left side list and drag it to the Destination entry field.
    6. Select the source volume from the left side list and drag it to the Source entry field.
    7. Double-check you got it right, then click on the Restore button.
    Destination means the new internal drive. Source means the old external drive.
    Step Six: Open the Startup Disk preferences and select the new internal volume.  Click on the Restart button.  You should boot from the new drive.  Eject the external drive and disconnect it from the computer.

  • How to include images in my app

    hi all.
    I'm using Apex 2.1 over XE.
    I'm sorry but i can't find any thread related to how to include images in my app.
    I've uploaded several trough shared componentes / files / images, but don't know how to use it, for example, in an HTML region, as header of the page.
    Thanks a lot for your help.
    Fernando

    Hi,
    I have used four different ways to display images in my applications depending on which method is the fastest to refresh.
    1. Under Application Attributes > Edit Standard Attributes > Substitutions enter your substitution string (MY_IMAGE_URL) and substitution value(http://somewhere/img)
    and then in the region or template use the following syntax &MY_IMAGE_URL. in your html tags eg. img src="&MY_IMAGE_URL./banner.png" width="x" height="x">)
    I have found this the best for image refresh speed, especially if the image is already cached.
    2. Load your image up into Apex and don't associate it with any application and use the following tag img src="#WORKSPACE_IMAGES#banner.png" width="x" height="x" alt="">
    Good for development as all images not associated to an application are available.
    3. Load your image up into Apex and associate it with an application and use the following tag img src="#APP_IMAGES#banner.png" width="x" height="x" alt="">
    This can be a pain during development when your application numbers continually change.
    4. Use standard http address <img src="http://somewhere/banner.png" width="x" height="x">
    Ben
    Message was edited by:
    Benton

  • How to export images in Acrobat Pro X v10.x for Mac?

    How to export images using Acrobat Pro X v10.1.1?
    This is a positive criticism: it was easy with Acrobat Pro X v.9.x. The new Acrobat interface without menus and submenus is awkward and utterly anti-intuitive. If it ain't broke don't fix it!!! Thanks.

    ==>  http://help.adobe.com/en_US/acrobat/pro/using/WS58a04a822e3e50102bd615109794195ff-7ee7.w.h tml

  • How to attach image in BPM CustomJSP and view it

    Hello everyone im new here ,
    Is there any tutorial how to attach file into BPM Object ?
    Im using Oracle BPM Studio 10.3.1
    I have seen many tutorial how to attach file into BPM using fileChooser
    ( https://community.oracle.com/thread/880712  )
    and succeed but my next problem is how to show image that i have been uploaded before
    Thaaanks
    Regards
    Shiddiq

    Hi Shiddiq,
    You can get access to an uploaded file using the execData object.
    For example, you can use execData.attachment[1].name to retrieve the file name of your first attachment.
    Similartly use execData.attachment[1].contents to retrieve you first file contents in a base64 format.
    Antonis

  • How to show image in a Transperent form ?? screen shots attached

    Hi
    Help me in making Images appearing as Transperent . Screen shots attached
    I am having a TextInput and a Search Button (The Functionality is that user can enter something in this TextInput and makes a Search Operation by pressing Search Button .)
    At the Initail screen display i need to show Some Image in transperent  Inside this TextInput  , when Mouse is focused on this TextInput , the Image will be completely Invisible .
    Now the question i want to ask is , how to show image in a Transperent form ??
    Please find the screen shots attached with this Thread .

    Thanks for specifying  the alpha property of an Image .

Maybe you are looking for