How to grant create table to new User

Hi All,
I have created one new User, and give GRANT CREATE SESSION TO USER. But after that from which grant, i would be able to create table and other object, specially for table.Thanks,
Brij

Granting Resource role will work in your case as it consist of below privs
grant resource to <username>;
GRANTEE                           PRIV NAME                
RESOURCE                          | CREATE CLUSTER           
                                   | CREATE INDEXTYPE         
                                   | CREATE OPERATOR          
                                   | CREATE PROCEDURE         
                                   | CREATE SEQUENCE          
                                   | CREATE TABLE             
                                   | CREATE TRIGGER           
                                   | CREATE TYPE         Please close the thread if you feel you have the answer and keep the Oracle forum clean.
https://forums.oracle.com/forums/ann.jspa?annID=885

Similar Messages

  • How to grant create table privilege for a user on a specific table

    Hi:
    I created a user, for a test scenario. I granted this user create any table, and I made the default tablespace as example.
    When I connect as the user and try to create a table, I get this:
    SQL> create table T1 (NAME varchar2 (500), AGE number(2));
    create table T1 (NAME varchar2 (500), AGE number(2))
    ERROR at line 1:
    ORA-01950: no privileges on tablespace 'EXAMPLE'
    How can I grant the necessary privilege to have user create/delete tables on tablespace example?
    Thanks.
    DA

    create user ADAM identified by radge default tablespace EXAMPLE
    quota 10M on EXAMPLE;
    for example 10Mbytes given to Example tablespace.... or you can write:
    .....quota unlimited on EXAMPLE
    and
    grant connect to ADAM
    grant create table to ADAM .....
    or
    grant connect , resource to ADAM .... although grant resource is not recommended...
    ....and something else....
    you should define temporary tablespace in create user command... otherwise the system would be used...
    Greetings...
    Sim
    Message was edited by:
    sgalaxy

  • How do I create a CLEAN new user?

    I get a cl_kernels plugin error after login; cannot open new finder windows, Terminal.app does not start, Safari quits unexpectedly, the clock in the menu ba never shows, things are generally unusable. I deleted that account and created new ones. Using a different username all is fine. Creating a new username and transferring all the old data, incl. the Library folder, all is fine. BUT, creating a new user account with the old username (that was working fine since 10.0, six lower case letters only), I get the same old error.
    The problem started to appear shortly after installing the box.net and GoogleDrive clients -- not sure whether that'd be related. Any ideas?

    System Preferences>Users and Groups. Make a new user. (follow the arrow)

  • OID users ( EUS) problem with grant create table with admin

    Hi,
    We activated enterprise users in the OID.
    There is a role APP_ADMIN that has the following grants:
    create user
    drop user
    create table with admin option
    this is for an application that creates BI schemas, so it needs to be able to create other users.
    I have granted these to a local role, and the user has access to the local role, thanks to the OID setup.
    The create and drop user work.
    however, the grant create table to another user does not work.
    Is there an issue with 'with admin option' grants in Enterprise user security?
    Regards,
    Peter

    If I grant
    grant create table to test_role with admin option;
    it does not work
    if I grant
    GRANT GRANT ANY PRIVILEGE to test_role WITH ADMIN OPTION;
    it does work.
    The test command as user with test_role is:
    grant create table to test_usr;
    very strange!
    If the user is a standard user and I create role test_role
    and grant create table to test_role with admin option it works.
    but if I convert the user to an EUS user and the same privilege is given to the role ( role is granted to a global role to an enterprise role)
    it doesnt work
    Edited by: Peter on Dec 7, 2012 2:36 PM

  • Create User Activity: How to add Roles to the new user

    Hi all,
    My Problem is Using LC Workbench I have created one process it is having Create User Activity. I am able to creating the new user with this process.
    But I dont have idea how to add roles to that new user? Please anybody can help me out
    Thanks in advance.

    Hi,
      I used Built-in Componets till now, Please help me out What are the steps needed to implement a custom componet.
    Thanks in advance

  • I just purchased a one year old iMac.  How do I create a brand new admin account?

    I just purchased a one year old iMac.  How do I create a brand new admin account?

    The first thing to do with a second-hand computer is to erase the internal drive and install a clean copy of OS X. You—not the original owner—must do that. How you do it depends on the model, and on whether you already own another Mac. If you're not sure of the model, enter the serial number on this page. Then find the model on this page to see what OS version was originally installed.
    It's unsafe, and may be unlawful, to use a computer with software installed by a previous owner.
    1a. If you don't own another Mac
    If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc from the Apple Store or a reputable reseller—not from eBay or anything of the kind. If the machine is very old and has less than 1 GB of memory, you'll need to add more in order to install 10.6. Preferably, install as much memory as it can take, according to the technical specifications.
    If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for a MacBook Air. You should have received those media from the original owner, but if you didn't, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
    To start up from an optical disc or a flash drive, insert it, then restart the computer and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
    If the machine shipped with OS X 10.7 or later, you don't need media. It should start up in Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
    Some models shipped with OS X 10.6 and received a firmware update after 10.7 was released, enabling them to use Internet Recovery. If you have one of those models, you may not be able to reinstall 10.6 even from the original discs, and Internet Recovery may not work either without the original owner's Apple ID. In that case, contact Apple Support, or take the machine to an Apple Store or another authorized service provider to have the OS installed.
    1b. If you do own another Mac
    If you already own another Mac that was upgraded in the App Store to the version of OS X that you want to install, and if the new Mac is compatible with it, then you can install it. Use Recovery Disk Assistant to prepare a USB device, then start up the new Mac from it by holding down the C key at the startup chime. Alternatively, if you have a Time Machine backup of OS X 10.7.3 or later on an external hard drive (not a Time Capsule or other network device), you can start from that by holding down the option key and selecting it from the row of icons that appears. Note that if your other Mac was never upgraded in the App Store, you can't use this method.
    2. Partition and install OS X
    If you see a lock screen when trying to start up from installation media or in Recovery mode, then a firmware password was set by the previous owner, or the machine was remotely locked via iCloud. You'll either have to contact the owner or take the machine to an Apple Store or another service provider to be unlocked. You may be asked for proof of ownership.
    Launch Disk Utility and select the icon of the internal drive—not any of the volume icons nested beneath it. In the  Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive.
    After partitioning, quit Disk Utility and run the OS X Installer. If you're installing a version of OS X acquired from the App Store, you will need the Apple ID and password that you used. When the installation is done, the system will automatically restart into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
    Then run Software Update and install all available system updates from Apple. To upgrade to a major version of OS X newer than 10.6, get it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the original owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed—you have to repurchase them.
    3. Other issues
    If the original owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're irrevocably linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Mac App Store Customer Service has sometimes issued redemption codes for these apps to second owners who asked.
    If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able to  authorize it immediately under your ID. In that case, you'll either have to wait up to 90 days or contact iTunes Support.
    When trying to create a new iCloud account, you might get a failure message: "Account limit reached." Apple imposes a lifetime limit of three iCloud account setups per device. Erasing the device does not reset the limit. You can still use an iCloud account that was created on another device, but you won't be able to create a new one. Contact iCloud Support for more information. The setup limit doesn't apply to Apple ID accounts used for other services, such as the iTunes and Mac App Stores, or iMessage. You can create as many of those accounts as you like.

  • How does APEX create and save new files. What extension does it save in?

    Hi can someone help me with this question?
    How does APEX create and save new files. What extension does it save in?
    Cheers!
    VJ

    It's really too bad we can't see VJ's face when the concept sinks in. This is one of my favorite moments when teaching APEX classes. Most people love it, some people don't. If nothing else it really proves the power and performance of the Oracle database. Each page view can generate 40+ queries, yet on the average system this takes less than .04 seconds.
    Keep in mind there are no undocumented features or "Oracle Internals" that the APEX team uses to achieve this performance, just sound database design. With every feature they add they evaluate how it will be used and design the tables and indexes to most efficiently answer the query. Sometimes this means going against "purist" normalized principals.

  • How do you set up a new user account on Mountain Lion?

    How can I set up a new user account on my 24 inch iMac?

    Log in as an administrator. Open System Preferences and go to Users & Groups.
    You create the new user account there.
    regards

  • How can I create a form for users wherein the text field will expand to accommodate additional text?

    How can I create a form for users wherein the text field will expand to accommodate additional text?

    You need to use LiveCycle (PC Only) to create a dynamic form like that.
    The best you can do with Acrobat to view all of the text in a field is to set the field to multiline, and set the size to "Auto" (If you don't set the size to 'Auto', you can enter as much text as you wish, but the user will need to use the scrollbar to view all of the text.)

  • How can i create table between different servers schema

    Hi,
    Can any advice me how I can create table on remote oracle schema.
    Thanks in advance
    Faheem Latif

    I am telling you what I know about remote table creation - it is impossible in Oracle, if you trust the documentation of course.
    ORA-02021: DDL operations are not allowed on a remote database
    Cause:     An attempt was made to use a DDL operation on a remote database. For example, "CREATE TABLE tablename@remotedbname ...".
    Action:     To alter the remote database structure, you must connect to the remote database with the appropriate privileges.

  • How can I create aform allowing a user to add an image in it?

    How can I create aform allowing a user to add an image in it?

    select * from dba_streams_rename_schemaWhat do you have there?

  • How i can create table with data

    How i can create table with data from dev to production?

    How i can create table with data
    [url=http://en.wikipedia.org/wiki/Black_Beast_of_Aa
    aaarrrrrrggghhh]from dev to production?
    [url=http://img2.travelblog.org/Photos/3800/14977/t
    /64816-Col-Kurtz-0.jpg]The horror, the
    horror.lol, you gonna scare somebody here.
    Are we helping devil?

  • How can i create a brand new account without a credit card ?

    how can i create a brand new account without a credit card ?

    There are instructions on this page for creating an account without giving a credit card : http://support.apple.com/kb/HT2534

  • How to create (or invite) new users in SAP JAM Enterprise edition?

    Our client has just purchased SAP Jam Enterprise as they want to integrate it with SAP Cloud for Customers (collaboration on service ticket resolution across departments).
    I have just logged in with the administrator account to what appears to be a SuccessFactors homepage. I can see how to get to Jam or to the Admin console. But there is no obvious way of creating new users so we can start running demos with the client.
    The JAM administrator guide does not seem to explain how to do that ???
    Does anybody have a quick tutorial on this topic?
    Cheers

    Hi Thierry,
    there are two guides which help you through the basic steps:
    At http://service.sap.com/rds-cfc-erp you can find a guide which describes the basic steps to configure SuccessFactors Platform including user management as a base. The document is part of a ZIP available in service market place and is called "Setting up SAP Jam for Integration with other SAP Solutions".
    Please be aware that this guide just covers the minimum steps. For a complete introduction we strongly recommend to register for the SAP Jam Academy and SuccessFactors Academy course available for partners.
    In addition there is the INTEGRATION: SAP Cloud for Customer + SAP Jam Guide available in servcice market place describing the actual configuraiton steps required for Jam/C4C integration: https://websmp206.sap-ag.de/~sapidb/012002523100002165402015E/1502_Config_CRM_HCI_COD.pdf
    Hope this helps,
    Ingo

  • Question about GRANT CREATE TABLE permission

    Hi,
    How can I grant permission to UserA to create tables in UserB/SchemaB. I understand that "CREATE TABLE" will give permission to the user to create tables within its own schema and "CREATE ANY TABLE" will give permission to the user to create tables in ANY schema.
    Is there a command to give CREATE TABLE to specific schema? Please advice ... Thanks!

    Is there a command to give CREATE TABLE to specific schema? Please advice ... Thanks!No but you can create your own solution
    have SCHEMA_B create a procedure, MAKE_SCHEMA_B_TBL, that issues command below
    EXECUTE IMMEDIATE CREATE TABLE ........
    then do as below
    GRANT EXECUTE ON MAKE_SCHEMA_B_TBL TO SCHEMA_A;

Maybe you are looking for