How to grey out Intel Graphic Media for local users?

does anyone know how to grey out the options to stop local users changing graphics options from Intel media graphics for Mobile?
As well if anyone know what is different in BIOS updates, any option to cancel booting devices (not only change order)

Hi
Sorry but something like this is not known to me. You can disable a lot of different functions but display properties and settings are always available.
BTW: I do not see some problem there is someone change resolution or whatever if the resolution is high and symbols to small.
As far as I know it is not possible to cancel booting devices.

Similar Messages

I dont have the Intel Graphics media 3600 series driver, I only have 2600, how do i find the update?

I finally have the Windows 10 icon, but theres one little annoying catch, it says I dont have the Intel Graphics Media Accelorater 3600 series. I have Intel 2600 on my acer Aspire one netbook. It says my display won't work. I tired downloading the driver from Intel website but it says this: The driver being installed is not being validated for this computer, please obtain the appropriate driver from the manufacturer. Does anyone have a link and driver that works? I'm here on the Acer's website, and I'm not finding what I need. How can something so small become such a big hassel? Computers work great when they work,but when you try to reserve Window 10, its becoming a pain in my ars.Sincerely, Dawn

Intel drivers can't install until you uninstall Acer's Intel VGA drivers. To check drivers support:http://us.acer.com/ac/en/US/content/support keep in mind that only this models will have Acer driver support for windows 10:http://us.acer.com/ac/en/US/content/windows10-eligible-models

Intel Graphics & Media Control Panel

Hi,
please how to cancel automatic start "INTEL Windows 7's Intel Graphics & Media Control Panel" after reboot?
Thanks
MS
Lenovo 410i, W7
Link to picture
Moderator note; picture(s) totalling >50K converted to link(s) Forum Rules

Hi,
Just download the Intel Video driver from Lenovo and resinatall. It won't bother again.
I write a blog for you on this issue. Lenovo provides an official explain in the reference section of my post.
http://amigotechnotes.wordpress.com/2013/11/09/stop-launching-intel-graphic-and-media-control-panel-...
Wish it helps!
Best regards,
Amgo

Windows 7 Control Panel Display and Intel Graphics Media Control Panel Constantly

I have a Nvidia NVS 5200 M running with Intel 4000 and Windows 7 on a Lenovo T430S.
Whenever I load the Control Panel -> Display settings, I can see options just fine, but I click on any of the drop down menus and they appear for a second, then immediately disappear (fast enough that I can't change settings).
There's a similar problem when I look in the Intel Graphics Media Control Panel. It constantly appears to be "loading" - the mouse icon turns into a little blue circle off an on, continuously. Similar thing with the settings, too - they appear and let me change them, but immediately return to the original setting. I can change them if I act SUPER quickly to make the change then click Apply. But 99/100 I'm not fast enough.
All drivers are up to date. I have no idea what to do (reinstall or uninstall this Intel Graphics control panel? How? Or somehow change a setting on my graphics card).
Please help!

Try uninstalling both drivers, then reinstalling them. Sometimes a clean driver update works better.
W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

How can I grey out the 'Next' button until a user clicks 'Submit'?

Hi guys,
despite how I say it or display it in slides, users don't read the instructions before the quiz. This results in them doing the quiz and then asking me why they scored zero when they answered all the questions. So my question is, how can I disable/deactivate/grey-out the Next button until a user clicks Submit after answering the question?
I've got Captivate 6.1 on a Windows platform.
Advice appreciated.
Carl

Hello Rod,
thanks for your answer - I should think more laterally in future.
In my testing, another question has arisen - how do I get the Next button behind the Clear button? It sounds stupid but I can't get the Next button behind the Clear. I go in to the Master Slide, click on Next to highlight it, and then move it either by the mouse or with the arrow button so that it sits under the Clear button. While Next is still highlighted I click on the button in the toolbar 'Send selected objects backward' to be sure, so that I see 'Clear'. When I go back to the Filmstrip, all I see is 'Next' and when I preview the slides all I see is 'Next' - what am I missing here? What have I failed to do? What am I not understanding?
Advice appreciated.
Thanks

How to Grey out the field "tracking number" during change mode in the order

HI Expert,
How to grey out the Tracking number (AFVGD-BEDNR) at Order -> Operation tab -> external tab ->tracking number.
during creation IW31 = not grey out and allow entry.
for change mode IW32 = grey out
if i set grey out at config OIOPD, it will grey out even during creation mode.
Please advise
Thanks
Regards

Hi
I think Using field selection it is not possible to make as display ,kindly check with screen or transaction variant -SHD0
regards
thyagarajan

Windows 10 Compatibility Issue - Intel Graphics Media Accelerator

Hi. I have been trying to update my pc to windows 10 as I'm sure many people are right now. However, after registering for my copy of it and being told everything is fine and my pc will run windows 10, it now appears I cannot. I receive a message saying: "The display manufacturer hasn't made your display compatible with Windows 10. Check with the manufacturer for support." As stated above the graphics driver is Intel Graphics Media Accelerator. Unfortunately I have been unable to find which series though. However, my issue is I cannot find any update for the graphic driver which makes my pc compatible with windows 10. I'm asking whether anyone knows anything about an update either available now, or any info such as a release date. I really hope nobody has to say this, but I'd even be grateful for someone to tell me my pc would never be compatible. Thanks in advance.

I have used the manual way of downloading W10 using the regedit etc. I then cancelled the installation due to fears my pc may crash or get stuck between W8.1 and 10 and be unable to get back to 8.1. Would continuing the installation be dangerous or is it safe to try? I was desperately looking forward to W10 and I'm now so disappointed I can't right now.

Windows 10 Compatibility - Intel Graphics Media Accelerator

Hi. I have been trying to update my pc to windows 10 as I'm sure many people are right now. However, after registering for my copy of it and being told everything is fine and my pc will run windows 10, it now appears I cannot. I receive a message saying: "The display manufacturer hasn't made your display compatible with Windows 10. Check with the manufacturer for support." As stated above the graphics driver is Intel Graphics Media Accelerator. Unfortunately I have been unable to find which series though. However, my issue is I cannot find any update for the graphic driver which makes my pc compatible with windows 10. I'm asking whether anyone knows anything about an update either available now, or any info such as a release date. I really hope nobody has to say this, but I'd even be grateful for someone to tell me my pc would never be compatible. Thanks in advance.

I have used the manual way of downloading W10 using the regedit etc. I then cancelled the installation due to fears my pc may crash or get stuck between W8.1 and 10 and be unable to get back to 8.1. Would continuing the installation be dangerous or is it safe to try? I was desperately looking forward to W10 and I'm now so disappointed I can't right now.

What is a difference between Intel UMA and intel Graphics Media Accelerator 3150 ?

What is a difference between Intel® UMA and intel® Graphics Media Accelerator 3150 ?
Solved!
Go to Solution.

Which models? UMA refers to shared memory, and is not the actual chipset. So this is simply a case where the video card isn't listed (while in the 3150 model, it is).
I am a Bestbuy employee who volunteers on these boards on my own time. I am not paid for posting here, and you should understand that my opinions are exactly that - opinions. I do not represent Bestbuy in any way.
: Open Mailbox

Intel graphics media accelerator 3150 not compatible with windows 10

This is the message I get when I tried to upgrade to Windows 10. "Intel graphics media accelerator 3150 not compatible with windows 10". Is this a hardware issue or should I expect an updated driver from HP eventually to solve this problem?Thanks for any input here.

Hi!, mini210_4020TU: Welcome, to Forum !. Please, check ... http://windows.microsoft.com/es-ar/internet-explorer/ie-system-requirements#ie=ie-11

Intel Graphics Diver for HP n-204tx for windows 7 64 bit

I have installed windows 7 64 bit.
I have downloaded NVIDIA graphics driver.
When i am trying to install it , it shows me error that install Intel Driver first.
So i am looking for Intel Graphics driver for my Laptop HP 15 n-204tx (Windows 7 64-bit)
HP support executive fails to solve my issue...and keeps blaming on microsoft... disappointed from HP.
This question was solved.
View Solution.

Hi:
This Intel graphics driver should work. Install and reboot, then install the nvidia graphics adapter driver.
https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=23885

How to find out last update date for business partner's marketing attribute

How to find out last update date for business partner's marketing attribute??
Im freshie for SAP Application and im assigned to find out last update date for marketing attribute changed
which table is involved??
Yours kindness will be appreciated
thanks

You can take a look at table AUSP as well as CRMD_AUSP_HIST.
The "changed by" and "changed at" are logged on attribute level, not on attribute value level. When you change one specific value, the system does a "re-insert" of all existing values of this attribute.
Take a look at the SAP notes 938426 and 966670 these may assit you in resolving the issue.
Regards,
William Laverde

How to find out Max threads count for Custom Work Manager??

Hi All,
How to find out Max threads count for Custom Work Manager??
I have created 1 WM & targeted it to a cluster of 2 MS. Later I created Max thread Constraint = 300 & assigned that to my WM.
I need to check how many threads maximum were created by my WM after lets say 1 completed day.
The idea behind that is to understand if .. 300 is enough or need to increase the same way as we do it for JDBC datasource like.. Active connections Max count.. etc.
Any Idea?
regards,
Tanmay

Hi Ashish,
Thanks for your response.
The monitoring page that you are suggesting does not indicate the max thread count reached for a particular WM.
For example, If I have Sample WM with 300 Max Thread Constraint, is there a way for me to check how many threads have been used out of 300??
Any pointers in this regard are appreciated.
Thanks,
Tanmay

How to use the same POWL query for multiple users

Hello,
I have defined a POWL query which executes properly. But if I map the same POWL query to 2 portal users and the 2 portal users try to access the same page simultaneously then it gives an error message to one of the users that
"Query 'ABC' is already open in another session."
where 'ABC' is the query name.
Can you please tell me how to use the same POWL query for multiple users ?
A fast reply would be highly appreciated.
Thanks and Regards,
Sandhya

Batch processing usually involves using actions you have recorded. In Action you can insert Path that can be used during processing documents. Path have some size so you may want to only process document that have the same size. Look in the Actions Palette fly-out menu for insert path. It inserts|records the current document work path into the action being worked on and when the action is played it inserts the path into the document as the current work path..

How to allow pop-ups in Safari for all users

How do you allow Safari pop-ups for all users? After rolling out 50 Mac OSX with Safari comes default with Safari pop-ups disabled, now I must allow pop-ups for all users logging in.
Good day!

Do you have an Exchange (e.g. a work) email account set up on the iPad ? If you do then it's possible that the account profile is preventing you turning popups 'on', in which case you would need to contact the email account administrator

How to grey out Intel Graphic Media for local users?

Similar Messages

Maybe you are looking for