How to Group left + group above

I am new to oracle report. Hope to get clear steps thx.
I have 7 columns in my report. 3 columns using group-left and i want to use another 1 column for group above.
How do i create group above for the column i want ?

It is not clear to me how your report layout will be looking at runtime. Can you provide any output example.
Always use the 6 digit before and after your example. Only small letters inside the curly brackets. For more information see FAQ right corner of the page.
-Ammad

Similar Messages

Group left and group above

I am trying to do a group left within or below a group above, like so.
Name John Doe
Incident Activity
12345 Apply
Accept
Modify
12346 Apply
Accept
Modify
Name Bill Smith
Incident Activity
12347 Apply
Accept
Modify
12348 Apply
Accept
Modify
I can't figure out how to specify different types of grouping for different groups.
Any suggestions?
null

Make a group above report for the first 2 groups. in the Data model extend the detail's repeating enclosing frame.
Inside this frame draw an additional default layout (a button in the Layout Editor on the left toolbar) and inside this one insert your detail group.
Or... you can create an above group without any break first, then separate a group in the Data Model and add a repeating frame around the detail columns. Specifi as source of this frame the name of the detail group from the Data Model.

Group above and left classic reports

how can i group above and left in an existing classic reports? is there any document around here please share it to me.

>
Please update your forum profile with a real handle instead of "user13653962".
how can i group above and left in an existing classic reports? What does "group above and left" mean? A demonstration layout on apex.oracle.com or here (using tags<tt>\...\</tt> tags to preserve formatting) would be helpful.
The options for break formatting on classic reports are:
<li>The basic built-in control break features.
<li>Simple DIY break layout on any number of columns using analytics in the source query: +{message:id=10679160}+
<li>Complex report layout with multi-level headings using analytics in the source query and a custom named column report template with conditional row templates: +{message:id=9816577}+
When you have a problem you'll get a faster, more effective response by including as much relevant information as possible upfront. This should include:
<li>Full APEX version
<li>Full DB/version/edition/host OS
<li>Web server architecture (EPG, OHS or APEX listener/host OS)
<li>Browser(s) and version(s) used
<li>Theme
<li>Template(s)
<li>Region/item type(s) (making particular distinction as to whether a "report" is a standard report, an interactive report, or in fact an "updateable report" (i.e. a tabular form)
With APEX we're also fortunate to have a great resource in apex.oracle.com where we can reproduce and share problems. Reproducing things there is the best way to troubleshoot most issues, especially those relating to layout and visual formatting. If you expect a detailed answer then it's appropriate for you to take on a significant part of the effort by getting as far as possible with an example of the problem on apex.oracle.com before asking for assistance with specific issues, which we can then see at first hand.

Converting a Group Left to a Group Above Report

I have created a dozen group left reports which I thought would only take up one page of data. I have found that some of them will actually require more pages but the report will only produce 1 page.
As an example I created the same report but used the group above style and this time by default it creates multiple pages. So how can I change my other reports into the group above style - note I cannot use the wizard as I have made many layout changes which woujld be lost.

It's not because of Group Left vs Group Above that report display only the first page. Make sure the Print Object On property of the repeation frames set to First Page Only, not All Pages.

How to create a Group Above report using APEX

I want to create a Group above report with more that one group using APEX. Is it possible to generate such a report using APEX. If so kindly let me know how to go about creating a Group above report with more than one group.

Hello Srini,
Thank you very much for the reply but I'm not into OBIEE... I want the required query to be processed and the output to be shown in xml layout to load into RTF document. The rest I can manage.. but please let me know how to get the .xml output with out using the report builder or the apps environment(concurrent prg submission)..
Please let me know if any... urgent
Thanks in advance
Krishna

How to design group above report manualy

I want to design group above report manually. How can i define main repeating frame and then internal repeating frame like report builder.

Hi,
one possibel way is:
//-- loop through all master values
<?for-each:DEPT_ROW?>
//-- store the master key in a variable
<?xdoxslt:set_variable($_XDOCTX,'v_DEPTNO',DEPTNO)?>
//-- Output of master data
<?DEPTNO?>
<?DNAME?>
//-- Loop through second dataset looking vor all data suitable to the current master key
<?for-each://EMP_ROW[xdoxslt:get_variable($_XDOCTX, 'v_DEPTNO')=DEPTNO]?>
<?ENAME?>
<?JOB?>
<?end for-each?>
<?end for-each?>
Hope that helps
Rainer

How to Serial No Printing in Report - group Above Report

In Scott Schema , report data query - select rownum, emp, ename, job, deptno from emp;
Reprot type : group Above.
If I am not using group above, serial no like 1,2,3 is printing correctly. But if i use group above, serial no are not printing on order. it is printing like 5,4,3, 8.. li
How to print serially with group above.
Thanks in advance for the help

O.Developer wrote:
In Scott Schema , report data query - select rownum, emp, ename, job, deptno from emp;
Reprot type : group Above.
If I am not using group above, serial no like 1,2,3 is printing correctly. But if i use group above, serial no are not printing on order. it is printing like 5,4,3, 8.. li
How to print serially with group above.Avoid rownum and use summary column at detail block and set following property.
Summary function :count
summary column : ename
reset at : <group name>Your serial problem solved.
Hope this helps...
Hamid

Problem in creating group above AND group left in one report!

Hi all,
I need a report that is a combination of group above and group
left.
Suppose I have 3 table (Emp, Sales, Product):
Emp Table has 2 column
- Emp_PK
- Emp_Name
Sales Table has 4 column
-Sales_PK
-Sales_Date
-Emp_FK
-Produck_FK
-Quantity
Product Table has 3 column
-Product_PK
-Product_Name
-Product_Price
I want to make Employee Sales Report For The Month that will
look like this:
Emp Number___: Emp_PK
Emp Name_____: Emp_Name
Sales Date______Product_Name____Quantity \(2 sales
________________Product_Name____Quantity /the date)
Sales_Date______Product_Name____Quantity
As you can see this consist of group above (The Employee) and
group left (The Sales and Product).
I create this by using 2 queries and link them (the Emp_PK from
1st query and Emp_FK from 2nd query) on the report builder using
data link.
The first query is:
Select Emp_PK, Emp_Name from Emp
The second query is
Select Emp_FK, Sales_Date, Product_Name, Quantity
From Sales, Product
Where Product_PK=PRODUCT_FK
I then create the layout for second query and choose group left
for Sales_Date using wizard and I create additional layout to
for the employee.
The problem is that when I run this report, it will print ALL
the employee record first (including employee who has NOT sale
anything) and then on the last page it will print the record of
Last employee on the Emp table and ALL sales record (including
those that is done by other employee).
This report will run correctly if I choose an exact employee
(For example by adding Where Emp_PK=1111 in the first query) to
report all of the sales done by this person (employee with emp
number of 1111). However I need the report to run and print
ONLY those employee who has Sales Records!
I thought that by linking the 2 queries in Data Model, it will
have the same effect as linking using the WHERE clause in query.
If suppose I create a query like this:
SELECT Emp_PK, Emp_Name, Sales_Date, Product_Name, Quantity
FROM Emp, Sales, Product
WHERE Emp_PK=Emp_FK AND Product_PK=Product_FK
The report will run OK but I can only choose EITHER group above
or group left for this ONE query methods in report Wizard.
Sorry if it is a long question but I hope you can see what I am
trying to do.
Thanks in advance for any tip.

hello,
of course you can create group left and group above blocks in a
single report.
you might want to use the INSERT REPORT BLOCK instead of the
report wizard, as the report wizard only allows you to use one
report layout per report, where the report block wizard (invoked
by INSERT REPORT BLOCK) allows you to choose on a per-block
basis.
of course you can create the blocks completely from scarth by
hand, if you want to.
regards,
the oracle reports team --pw

How can I have header only once in group above rep

Hi
I have developed a group above report and i see that the main header is repeated for every row (that is group by row). How can I have that only once per page or report and not repeat for every record?

The "main header" must be inside the repeating frame. Put the repeating frame in its own non-repeating frame, put the header in its own frame inside this frame at the top.
It sounds like you are using the report wizard... if so, don't.

How to display different text for labels in Group Above Report Oracle Repor

Hello,
Is there a way to change the text that is displayed in Labels in a Group Above Report? For example, I have a Group Above report with my columns of data and above the columns I have my column labels, but I would like to be able to display various text, i.e. different labels based on condition. In other words, Column1 label could say Column 1 or This is Column1, based on a condition. This is Oracle Report Builder 10.1.2.0.2.
Thank you.

968277 wrote:
I'm thinking it is possible with a Format Trigger, but I've only ever returned (TRUE) or (FALSE). I am very new to Oracle Reports Builder. Thanks.Hi,
Yes it's possible. and your are in the right place. use this true and false. For example
/*true means display, false means don't display */
if your_criteria_or_condition is ok then
return (TRUE);
else
return (FALSE);
end if;create as many label as your need and control with the code..
Hope this works..
Hamid
Mark correct/helpful to help others to get right answer(s).*

How to develop a group above report in mailing lable style

i want to know the method to develop a group above report (multi level groups) in mailing lable style like yellow pages on reports 6i e.g.
group 1: country
group 2: province
group 3: Industry
group 4: product or service
mailing lable: Company Name
Address
Contact No
I will highly appreciate if someone can help in this regard
M. Imran Shahzad
[email protected]

Post Author: V361
CA Forum: Formula
I am slightly confused, but perhaps you can create a formula
Then group on the formula. If this is not what you want, could you post some sample data, with the desired results.

Break Column in Group Above Report - Causing Error in Data Groupings

Since I'm required to designate at least one Break Column in my Group Above report, I created a dummy column in my SELECT statement. I did this so that I could designate the required minimum of at least one break column, but I designated one that won't have any impact on how the report is ordered, because it will be the same value (NULL) for every record. So, my SELECT statement starts out looking something like this:
SELECT
NULL break_column,
column_1 column1_name,
column_2 column2_name,
column_3 column3_name,
column_4 column4_name,
column_5 column5_name
I needed for the break column to have no impact on the ordering of the report because I need for the ORDER BY clause to completely control how the report is sorted, w/o any interference by a hard-coded break column. I need this because my intention is to make the ORDER BY clause dynamic, and a hard-coded break column with actual data would supercede the ORDER BY clause, thereby making it static.
Everything is working correctly with regard to how the report is sorting the records designated as group columns; however, the detail columns are getting all messed up as far as what main record they're grouped under.
By this I mean that when I designate only one break column, some details may display under the wrong group, where they're not supposed to. For example, each page consists of demographic info. about a specific record on a table, and the details listed under it should be the individual comments that have been made on that record. The issue I'm seeing is that for some records, it's showing comments from not only the record for that group, but it continues to list out comments made for other requests as well, when those comments should be displayed under their own respective records.
Why is this happening when I designate only one break column, and how can I keep it from doing this?

Did you get a solution for this?
I have the same problem.
Any help would be appreciated.
Thanks,
Madhu

Display Total in Group Above Report

Hello,
I have a group above report with month, product_id, product_name as group above fields I have product_entry_date, description, total_qty, actual_qty etc as display fields in my report.
I would like to have a total and grand total for total_qty and actual_qty for product_id and product_name. Issue I am having is when I add a summary column for total_ qty and actual_qty, total is getting displayed for each month.
How can I display total and grand for total_qty and actual_qty?
Any help is highly appreciable.
Thanks

ponic wrote:
Hello,
I have a group above report with month, product_id, product_name as group above fields I have product_entry_date, description, total_qty, actual_qty etc as display fields in my report.
I would like to have a total and grand total for total_qty and actual_qty for product_id and product_name. Issue I am having is when I add a summary column for total_ qty and actual_qty, total is getting displayed for each month.
How can I display total and grand for total_qty and actual_qty?
Any help is highly appreciable.
ThanksIf you want to display total qty for each month and you already done it. as you says..
total is getting displayed for each month.If not ,
Take a summary column at month group >> at properties .. Summary Function : Sum , Reset at month group.
and for grand total
take a summary column outside the query. >> at properties .. Summary Function : Sum , Reset at report.
Hope it works.
hamid
If someone's response is helpful or correct, please mark it accordingly.

Multi level Group Above Report

I have a multi level Group Above report like this.
School name : xxxx
Course1
Student1
Student2
Course2
Student1
School name : yyyy
etc...
No students are enrolled in some of the courses. I used the Outer Query in SQL to include those courses. Everything looks okay, except the header for the students are still appearing. how do I supress the student heading if no drecords are present?
Can somebody help me.
Thank you
David Smith

hello,
you will have to create a counter, that tells you the numbers of students (summary-column, function : count, reset on : course) and create a format-trigger on the heading that hides it when the number of students is 0.
regards,
the oracle reports team --pw

Group Above Report ?

Hi All,
I am using reports 6i.
I designed a master/detail report with style group above.
Its working fine. But I need every master record has to start from a new page.
But now First master record with its details ends at page no 8 and second master record starts at
page no 8 itself.
how to make the report output as new master record starts from a new page.
Help will be appreciated.
Regards
Sankar MN

Hello,
You can use the "Repeating Frame" property : Maximum Records Per Page
Set this property to 1 for the Master Repeating Frame
http://www.oracle.com/webapps/online-help/reports/10.1.2/topics/htmlhelp_rwbuild_hs/rwcontxt/props/pi_maximum_records_per_page.htm
Regards

How to Group left + group above

Similar Messages

Maybe you are looking for