How to group Table and Graph in the same section in OBIEE 11g

Hi,
I have a requirement of showing the table and graphs together for various products in different section. For example, for Product A, the table and graph would be displayed together and after product A, the table and graph for product B should be displayed.
I have tried using section but it creates the seperate section for tables and Graphs. Is there a way that we can put the section on table and graph together.
Thanks.

By any chance are you using a pivot table? If so, you can "Graph Pivoted Results". (When you're editing the pivot table, it's the last button at the top/middle of the page.) Then you can use the products column to break the pivot into sections and you'll have a pivot table and graph per section.
JB

Similar Messages

How to retrieve the Role of a custom sharepoint Group Progrmatically and also assigning the same roles to new user?

I want to retrieve the roles assigned to custom group progrmatically and assigning the same roles to new user?

Hi,
According to your post, my understanding is that you want to retrieve the Role of a custom sharepoint Group Progrmatically and also assigning the same roles to new user.
To retrieve the Role of a custom sharepoint Group, you can refer to:
http://www.sharepointfix.com/2011/05/find-rolepermissions-of-currently.html
To assign the same roles to new user, you can refer to:
http://msdn.microsoft.com/library/Microsoft.SharePoint.SPRoleAssignment
Best Regards,
Linda Li
Linda Li
TechNet Community Support

How do my wife and i use the same ipad?

How do my wife and i use the same ipad?

Nothing keeps you from handing it "back and forth" to share. I do this all the time on our couch with my Wife's iPad...
I think your quesiton revolves around having your own bookmarks and other data/info on the device.
The iPad is meant to be a "single user device"; there isn't a login/logout to differenciate one user from another. "The iPad isn't a computer".. ;-)
But, that being said, there are lots of ways to share the iPad/iOS environment. Many apps, such as Facebook, let you login and out.. so, while you share the same app, each of your login is different.
For bookmarks and notepad it is a little trickier.. You can each use a different browser (so all of your bookmarks are complerety seperate.)
In some cases I would sugest a couple get a $900 Macbook Air rather than an iPad if this sharing won't work. "Why can't I log in and out of and iPad?". I think that the fact that it doesn't gives the iPad many adantages over a computer.
If you have more specific questions pleaser ask away. Just like you share the kitchen table and many other things around your household, there are many ways to make this work! ;-)
Matt

Import data from few tables and export into the same tables on different db

I want to import data from few tables and export into the same tables on different database. But on the target database, additional columns have been added
to the same tables. how can i do the import?
Its urgent can anyone please help me do this?
Thanks.

Hello Junior DBA,
maybe try it with the "copy command".
http://download.oracle.com/docs/cd/B14117_01/server.101/b12170/apb.htm
Have a look at the section "Understanding COPY Command Syntax".
Here is an example of a COPY command that copies only two columns from the source table, and copies only those rows in which the value of DEPARTMENT_ID is 30:Regards
Stefan

How to stream Webcam and Desktop at the same time?

Hey Guy,
I just got a little Problem with FMLE... I want to stream live during a Game, but I dont know how to stream Desktop and Webcam at the same time ^^. The streaming Platform i want to use is twitch.tv.. the most common Gamin Platform I think...
I got an IMac i7.
Pls help me I dont get how all these ProGamer do it -.-
Thanks in advance
Kathi

You're going to need additional software or hardware. If you're running a Macintosh, try CamTwist. It's free and allows you to create virtual "cameras" from just about anything you can see on your computer. It's a bit clunky getting used to the interfact and how it works, however.
Hardware solutions (like scanline converters and video switchers) can get pretty expensive. So you may want to go with a piece of software that can handle on-the-fly video compositing/switching. There are two applications that come to mind right off the bat -- and lucky for you, both of them can also output to a live streaming server.
Wirecast is a popular choice, although the pricing starts around $500. It's Macintosh/Windows.
A very popular choice among gamers is XSplit (Windows only) and is a subscription-based model (you pay a small fee by the month, quarter, or year). XSplit has some very impressive compression happening under the hood, and was originally designed for gamers who wanted to share their desktop, XBOX, or PS3 adventures... all while also being able to lay over banners, PIP (picture-in-picture) of themselves, or anythhing else they wanted to clutter the screen with.
If you're running on Windows, give XSplit at shot. It can easily handle your desktop (or most anything else) as a "camera" as well as being able to lay your webcam on top of the desktop feed.

How to post aquisition and depriciation at the same time

Hi Gurus,
Could you please let me know how to post aquistion and depriciation at the same time.

Hi
What do you mean by postin at a time, is it uploading the balances to SAP
if not there is no question of posting at a time
Thanks
Kameshwar Rao

How to put material and service in the same order

I want to put the material and service in the same order. How do it input different taxes. and also migo for one material item and other service item.

HI,
In your scenario create material and service PO using T-code ME21N as follows.
1) Select PO document type, vendor and PO date
2) PO first line item account assignment 'N' if project and give input data material code,plant,storage location,qty,rate,delivery date and tax code.
3) PO second line item account assignment 'K', item category 'D',material short text for service, plant,storage location,material group data's are input given and press enter it will open 'Service Tab' in Item Detail Menu.
4) In item Detail Menu - Service tab you will give Service no.,qty,gross price for the above service material activity and service tax code in Invoice TAB and then check PO and SAVE.
5) After getting PO approved by top management.
6) PO first line item, you will do MIGO and PO second line item you will do ML81N service entry sheet.
7) On the vendor bill, you will mention material document number (GRN no.) & Service sheet number and given to accounts dept.. They will book vendor bill and give payment.
Hope, it is useful for you and solve your requirement.
Regards,
K.Rajendran

How to use ActionListener and ItemListener in the same class

Why can't I use both ActionListener and ItemListener in the same Class?
I want to use a drop down list and an entry box on the same form.
How? I'm having trouble compling......
Thanks!
CODE:
import java.applet.*;
import java.awt.*;
import java.awt.event.*;
public class Disp extends Applet implements ActionListener, ItemListener
{ TextField entry=new TextField(7);
Button Enter=new Button("Enter");
public void init()
add(entry);
add(Enter);
entry.addActionListener(this);
entry.requestFocus();
Enter.addActionListener(this);
public void actionPerformed(ActionEvent thisEvent)
String answer=entry.getText();

Simply get your Applet to implement both ActionListener and ItemListener.
public class MyApplet extends Applet implements ActionListener, ItemListener
public void init()
    itemWidget.addItemListener(this):
    actionWidget.addActionListener(this);
public void actionPerformed(ActionEvent e)
    System.out.println("ACTION PERFORMED!");
public void itemStateChanged(ItemEvent e)
    System.out.println("ITEM STATE CHANGED!");
}Hope this helps.

How to record midi and audio at the same time?

Hello,
I have a Roland sh-201 synth and Logic 9. When I use patches from the sh-201, it will record it via audio. What if I wanted to record the audio but also have the midi information as well? How would I be able to accomplish this? My synth is connected via USB which carries both midi and audio. Sorry for my poor english, but any help would be greatly appreciated.
Thank You.

Hi
Logic will record both audio and MIDI at the same time, but you *MUST* have the Software Instrument/MIDI track selected in the Arrange Track List.
The audio track must be 'Record Ready':
HTH
CCT

How do I read and write on the same CAN Port

I have a PXI chassis with a NI PXI 8464 CAN card. I am learning to use this device. I am trying to send messages back and forth between the two ports on the card. I have four simple VIs:ReadWas; WriteWas;ReadSteering; and WriteSteering. I have been starting the read VIs first then starting the write VIs. When I start the write VIs I get an error from CAN init saying I am trying to change an object that is running.
Is it possible to send and receive on the same port of the CAN card without stopping then reinitializing the card?
I have attached ReadWas, ReadSteering and WriteSteering to this post. ReadWas and WriteSteering share a CAN port.
Any help is greatly appreciated,
Thanks,
Phillip
Attachments:
ReadWAS.vi ‏112 KB
ReadSteering.vi ‏143 KB
WriteSteering.vi ‏114 KB

have you looked at this example, (CAN Send & Receieve using NI-CAN Frames) it is in the example code section
http://sine.ni.com/apps/we/niepd_web_display.DISPLAY_EPD4?p_guid=E993D9B56C3D2BABE0340003BA230ECF&p_...
http://sine.ni.com/apps/we/niepd_web_display.DISPLAY_EPD4?p_guid=E993D9B56C3D2BABE0340003BA230ECF&p_...
Basically, you are getting the error because the second time you call CANconfig it realizes it is already open. Try consolidating the 2 pieces of code into 1 CAN VI.

How to find tables and fields in the standard program.

Hi to all,
              I am very new to ABAP,
            i am willing to write Report ,that is if i enter the vendor number i have to get item,quantity , name...with dateetc....
My approach was : i went to ME2L and i gave vendor number and date in that then i got some data ,then i got the program of that list ( it was there in bottom right) i.e, SAPMSSY0 .
           Then i entered in SE38,in that i go with Display Object LIst to find out the tables and fields,but i failed to found.
My question is : I can write the reports if i know the fields and tables location....
                          Here i want to know the ,if i enter the Vendor No, i have to get the regarding information about that NO,_for that i have to know the fields and tables_ of item and cost ....every thing ...
       if my question was not clear please ask me i will explain you again...
      Can you help me how to find...
Thanks in Advance
Bhanu.

Hi Bhanu,
   Goto transaction SE84 then follow the path
SE84-->ABAP DICTIONARY--->FIELDS---->TABLE FIELDS-->ENTER THE TABLE OR FIED NAME you want to find
    and EXECUTE the programm you will get all the information regarding that field or table.
    Hope this solves your problem.
Thank you,
Pavan.
Edited by: PAVAN CHANDRASEKHAR GANTI on Sep 1, 2009 12:57 PM
Edited by: PAVAN CHANDRASEKHAR GANTI on Sep 1, 2009 12:58 PM

How to plot Actual and Target on the same line chart in webi

Hi,
We have a requirement where we need to plot a graph on webi. The data is something like:-
Month     Regional Office     Actual      Target
12014     Midwest               768          876
22014     Eastern               1908          1876
Can anyone please suggest something.
Regards
Shirley

Hi Shirley Ray,
May i know the exact requirement...
IF you want to show the data in graph,its just simple
you can show regional office and month on x axis,measure on y axis like below chart.
right click on table and convert it into column chart.
Regards,
Samatha B

How do my husband and I use the same itunes acct

People tell me all the time that their whole family has the same iTunes account so they can share everything. How do they do that? I tried to do mine on my husands phone and it said that the account was already in use so he set up his own. How do we share apps? If he pays for one I dont want to pay for the same one.

Settings App > iTunes & App Store > Automatic Downloads [turn off the catagories you do not wish to be auto-downloaded].
You will want to do this on both devices

How to access music and playlists on the same computer, for both Microsoft accounts?

Hello all,
My husband and I recently got a new computer and are running Windows 8.1. We were able to successfully use an external hard drive to transfer all of the music and playlists over so that I can access them on my user account (I am the "main" user). All of my playlists are present exactly as they were previously. This is the location of the iTunes media folder on our hard drive: C:\Users\Brittany\Music\iTunes
However, when my husband logs on as a user separately, the iTunes program is there, but we are only able to get him very limited access to some music. We can't get him access to any of the playlists, which is where the bulk of the music is.
We've tried everything. We've double-checked that he's an Administrator. We've made sure that all the folders are shared between us. We can both read and write to this folder location. We've gone into the preferences in iTunes itself and told it where we want it to find the iTunes Media folder. We also tried moving the iTunes media folder into the public shared music folder, and that didn't do a darn thing either. Nothing works.
I feel like we are missing some critical step somewhere. Or maybe we screwed something up somehow. I don't know. All I know is that it seems crazy if we're not going to be able to access the exact same version of iTunes complete with playlists. What gives?
Please help! Thank you!

We've gone into the preferences in iTunes itself and told it where we want it to find the iTunes Media folder.
This step is wrong. Make sure the iTunes folder in your profile is visible from his login, then press and hold down shift as you launch iTunes and browse to the iTunes Library.itl file in your library. It may be easier to store the library at C:\iTunes and have both accounts access it there.
See Backup your iTunes for Windows library with SyncToy for advice on how to keep the backup copy of your library on the external drive up to date.
tt2

How to read from and write into the same file from multiple threads?

I need to read from and write into a same file multiple threads.
How can we do that without any data contamination.
Can u please provide coding for this type of task.
Thanks in advance.

Assuming you are using RandomAccessFile, you can use the locking functionality in the Java NIO library to lock sections of a file that you are reading/writing from each thread (or process).
If you can't use NIO, and all your threads are in the same application, you can create your own in-process locking mechanism that each thread uses prior to accessing the file. That would take some development, and the OS already has the capability, so using NIO is the best way to go if you can use JDK 1.4 or higher.
- K
I need to read from and write into a same file
multiple threads.
How can we do that without any data contamination.
Can u please provide coding for this type of task.
Thanks in advance.

How to group Table and Graph in the same section in OBIEE 11g

Similar Messages

Maybe you are looking for