How-To Guide Who is Who iView

Hello,
I found here in the SDN a How-To Guide about configuring the Who is Who iView. But in this guide consists that the TREX is a requirement for this iView.
Now we don´t use TREX at the moment but we would have this Who is Who iView. Is it possible to implement this iView without TREX and which setting are different between implementation with and without TREX?
Regards
Philipp

Hi,
Check this thread.
/message/895166#895166 [original link is broken]
This iView uses both TREX and KM. Both together helps in indexing and searching.
Regards,
Harini S

Similar Messages

How to customise the R/3 screen for Whos Who iView?

Hi All,
   I am doing ESS implementation for R/3 4.7 on EP 6.0 WebAS 6.40 with Bussiness Package 50.4.
   The Who's Who iView is showing me some unwanted boxes
in R/3 which I need to remove them off completely.
   So help required.
Thanks in Advance,
Pavanmeet Singh.

Hi Pavanmeet,
You can get the IAC component for the who's who and then modify it. The who's who IAC component comes under two themes one under theme 99 and other under 02(i dont remember exactly). May be in the iview you can point to the other theme and check if the screens are coming good.
The IAC should be under the ITS server ( where ITS is installed) or where the IAC components are placed when you download the business package of ESS.
The path should be something like this.
c:/program files/SAP/ITS/../99/filename
Regards
Arun

Employee Photo in Who's Who iView

Dear all,
I need to display the employee photo in the ESS (Webdynpro) Who's who iView. Please let me know whether I can use KM for storing the employee photos and displaying it in Who's Who iView. If possible please let me know the config steps / guide regd the same.
Thanks,
Vasu

Dear all,
Thanks for the reply. Actually i need to display the photo in Who's who iView(com.sap.pct.erp.ess.whoiswho iView) which is in ESS business package . Since we don't have content server in our landscape, Please let me know how we can configure the Who's who iView(com.sap.pct.erp.ess.whoiswho iView) to display the photo from KM.
Thanks in advance,
Vasu

Who is Who iView: Problem with sorting

Hi out there,
I have the following problem: I would like to have the
Search result generated by the Who is Who iView sorted
by two properties, that is first by ume:lastname and
second by ume:firstname.
The search result will be sorted if I add ume:lastname in
the "Search Result Sort Property" parameter within the iView.
The question is: How to provide the second sort property?
Any hint is highly appreciated
Thanks in advance
Sabine

Hello,
I don't know if it will help but check the who is who manual.
http://help.sap.com ->Documentation - SAP NetWeaver ->
pick your version and look for
"Configuration of the Who#s Who iView"
please notice that the documentation for EP6 SP2 can be find under
Knowledge Management - Collaboration - Administration Guide -
Making Services Available - iViews with Collaboration Services ->
"Configuration of the Who#s Who iView"
Hope this manual give's you some insight. Sort parameters should be explained. I would suggest writing the two separeted by ,
ume:lastname, ume:firstname
Best Regards,
Defour Frederik

Link in the Who is Who iView for ITS Service

Dear All,
Can you please guide me where exactly i have to mention the link for the Service which i have to use from the ITS for the who is who iview?
I am getting the error as
No Service Name specified
Your request didnot contain service name. Please specify service name in the URL path
Example URL
http:
.....\scripts\wgate\pz01\!
I am not understanding where to specify the path exactly.
Regards,
Samir

Hello Samir,
Are you using standalone ITS.
If u are using itegrated ITS then mention the below parameter in ITS of ur portal system.
ITS HOST NAME: <host_name>:<port>
ITS PATH: /sap/bc/gui/sap/its/
ITS PROTOCAL: http
Regards
Deb

Mouse-Over customization on Who is Who iview

Hi
I need to change the Who is Who iView to show some text on mouse-over of any of the fields - does anyone know how I would go about doing this? I am working on EP 6.0.
Regards,
Thosha

Even some information on customizing the Who is Who iView would be appreciated.

Firefox continues to crash unexpectedly. The report mesage suggests that the information I send will help Firefox to cure the problem but I never hear anything from them. How is someone who isn't a computer geek supposed to solve this problem?

Firefox continues to crash unexpectedly. When it does a message requests me to send a report that is supposed to help Firefox understand the problem but I never hear from them again. Just how is someone who isn't a computer geek able to understand all the detailed discussions from other users. My Firefox is completely up to date. Is there anyone who can explain what is happening in simple terms?
== Crash ID(s) ==
Application Basics Name Firefox Version 3.6.3 Profile Directory Show in Finder Installed Plugins about:plugins Build Configuration about:buildconfig Extensions Name Version Enabled ID Modified Preferences Name Value browser.history_expire_days.mirror 180 browser.places.importBookmarksHTML false browser.places.importDefaults false browser.places.leftPaneFolderId -1 browser.places.migratePostDataAnnotations false browser.places.smartBookmarksVersion 2 browser.places.updateRecentTagsUri false browser.startup.homepage http://www.google.co.uk/ browser.startup.homepage_override.mstone rv:1.9.2.3 extensions.lastAppVersion 3.6.3 network.cookie.prefsMigrated true places.last_vacuum 1273847973 print.macosx.pagesetup-2 PD94bWwgdmVyc2lvbj0iMS4wIiBlbmNvZGluZz0iVVRGLTgiPz4KPCFET0NUWVBFIHBsaXN0IFBVQkxJQyAiLS8vQXBwbGUvL0RURCBQTElTVCAxLjAvL0VO… print.print_bgcolor true print.print_bgimages true print.print_command print.print_downloadfonts true print.print_evenpages true print.print_footerleft print.print_footerright print.print_headerleft print.print_headerright print.print_in_color true print.print_margin_bottom 0.5 print.print_margin_left 0.5 print.print_margin_right 0.5 print.print_margin_top 0.5 print.print_oddpages true print.print_orientation 0 print.print_pagedelay 500 print.print_paper_data 0 print.print_paper_height 11.00 print.print_paper_size -1317362828 print.print_paper_size_type 1 print.print_paper_size_unit 0 print.print_paper_width 8.50 print.print_printer print.print_reversed false print.print_scaling 1.00 print.print_shrink_to_fit true print.print_to_file false print.print_unwriteable_margin_bottom 57 print.print_unwriteable_margin_left 25 print.print_unwriteable_margin_right 25 print.print_unwriteable_margin_top 25 privacy.sanitize.migrateFx3Prefs true security.warn_viewing_mixed false

Hi Mariah ~
It's Shaunn, the original poster. Thanks for your posting. I'm glad I'm not the only one that's having this problem.
Now that you mention it, I'm having the exact same problem on Facebook as well, when I play Family Feud.
I wish someone would investigate and post a solution to this problem. No-one from Playlist has responded, and no-one "Officially" from Firefox either.
So Mariah, I appreciate you and your post.
If you find anything out...from anywhere...would you please let me know. You can post it right here and I'll get an email from Firefox.
I'll do the same for you.
Enjoy your day and good luck.
Shaunn

How to find who has deleted program

Hi,
Some one has delete a report from the system.How can I find the user who has deleted?
thanks

Hi ,
Please refer the threads,
How to find who deleted my program?
How to find deleted program
Best Regards.
Reward points if it is helpful.

Preparation failed in trex when using standard Who's who iview

Hi,
I have encountered a problem with the standard Who's who iview, which makes a simple search in the ume impossible.
All users "preparation fails" with the following error from Trex monitor > Display queue entries:
Document ID: /ume/users/USER.PRIVATE_DATASOURCE.un%3Ar5mas.usr, Return Code: 16040, Return Message: SSL: rc=-40 pse_error, Document Status: Prepration failed, Action: Index, Retry Count: 3.
I'm working on Netweaver '04, stack 9, installed from rapid installer.
Any help is greatly appreciated.
Regards,
Martin
Message was edited by: Martin Søgaard

Just in case anyone happens to stumble across this thread via search, the error 16040 means that your user doesn't have permission to read the PSE it's trying to open. You'll get errors like this in one of your trace files:
[Thr 1224] =================================================
[Thr 1224] = SSL Initialization on PC with Windows NT
[Thr 1224] =   (710_REL,Jul 15 2010,mt,ascii,SAP_UC/size_t/void* = 8/64/64)
[Thr 1224] =   found SAPCRYPTOLIB 5.5.5C pl36 (Jul 3 2013) MT,[aesni],NB
[Thr 1224] =   current UserID: SAPDOMAIN\SAPServiceSID
[Thr 1224] =   found SECUDIR environment variable
[Thr 1224] =   using SECUDIR=E:\usr\sap\SID\TRX00\sec
[Thr 1224] *** ERROR =>   secudessl_Create_SSL_CTX(): PSE "SAPSSLS.pse" not found! [ssslsecu.c   1354]
[Thr 1224] secudessl_Create_SSL_CTX: SSL_CTX_set_default_pse_by_name() failed --
[Thr 1224]   secude_error 1281 (0x00000501) = "open("E:\usr\sap\SID\TRX00\sec\SAPSSLS.pse") returned"
[Thr 1224] >> ---------- Begin of Secude-SSL Errorstack ---------- >>
[Thr 1224] ERROR in SSL_CTX_set_default_pse_by_name: (1281/0x0501) open("E:\usr\sap\SID\TRX00\sec\SAPSSLS.pse") returned : "Permission denied"
[Thr 1224] ERROR in ssl_set_pse: (1281/0x0501) open("E:\usr\sap\SID\TRX00\sec\SAPSSLS.pse") returned : "Permission denied"
[Thr 1224] ERROR in af_open: (1281/0x0501) open("E:\usr\sap\SID\TRX00\sec\SAPSSLS.pse") returned : "Permission denied"
[Thr 1224] ERROR in secsw_open: (1281/0x0501) open("E:\usr\sap\SID\TRX00\sec\SAPSSLS.pse") returned : "Permission denied"
[Thr 1224] ERROR in secsw_open_pse_or_extension: (1281/0x0501) open("E:\usr\sap\SID\TRX00\sec\SAPSSLS.pse") returned : "Permission denied"
[Thr 1224] ERROR in sec_get_PSEtype: (1281/0x0501) open("E:\usr\sap\SID\TRX00\sec\SAPSSLS.pse") returned : "Permission denied"
[Thr 1224] ERROR in aux_read_PSEFile: (1281/0x0501) open("E:\usr\sap\SID\TRX00\sec\SAPSSLS.pse") returned : "Permission denied"
[Thr 1224] ERROR in aux_file2OctetString: (1281/0x0501) open("E:\usr\sap\SID\TRX00\sec\SAPSSLS.pse") returned : "Permission denied"
[Thr 1224] << ---------- End of Secude-SSL Errorstack ----------
[Thr 1224] *** ERROR => SapISSLAddCredential(): Error SSSLERR_PSE_ERROR trying to create SERVER Credential
        for "SAPSSLS.pse" [ssslxxi.c    2278]
[Thr 1224] *** ERROR => Initialization of SSL library failed -- NO SSL available!
[Thr 1224] =================================================

Problem with "Who-is-who"-iView

Hi,
I wanted to integrate the "Who-is-who"-iView as it is described in SAPHelp (<a href="http://help.sap.com/saphelp_nw04/helpdata/en/21/ac21410bc3ef23e10000000a155106/frameset.htm">Configuration of the Whos Who iView</a>).
But it doesnu00B4t work. In the ume\users repository there is a list of all users but the file size of each user is 0 bytes. When I click on a user name I get the following error: <b>"Item not found
The item you are attempting to access is not available. Check that the name or link is correct. You might also check whether the associated repository is currently accessible."</b>
And the indexing monitor shows for the ume-index: "2 IN PROCESS, 240 ERRORS".
We have SAP Portal 6.0.13.0 (KM is the same version SPS13).
Thanks for help.
Regards,
Sven

Hi Sven
I think you can solve the problem using the instructions from SAP note 880646.
We encountered the same problem, and as I recall it is caused by the installation/upgrade of SPS13 (which is buggy).
Best regards,
Martin
Message was edited by: Martin Søgaard

How to see who deleted the Object

Hi Gurus
Would you please advise if some data target or transformation is deleted from the BW system how to know who deleted the objects?
Thanks

How to see who deleted the Object

How to identify who made the changes to the tfs security

Hi All,
We are into a weird situation. In our environment we create groups TFS_Project admins, TFS_Contributors, TFS_buildusers, TFS_Readers in AD for every new project and added to corresponding group on the Team project level.
One of the users is a member of TFS_project admins and TFS_contributors. Next day he is not belongs to any group. Some one has been removed him from the groups.
Question: how to find, who has deleted the user from the groups.
Please help on this .. very high priority issue.
Thanks,
Rajukumar

Hello,
Go To RSPC1 give your process chain name (Go to LOG View ) there you will get Date selectin screen (give This Month and last Month or as per your reqirement) there you can see who ran the process chain with ID.
Regards,
Edited by: Subbu_Amar on Oct 13, 2010 5:01 AM

User Photo physical location in Who Is Who iView

Hi ,
Could you please let me know where will be the user photo physical location after uploading with Who Is Who iView.
Thanks

Hi,
from UserPhotoService class I can see method getPhoto, where:
public InputStream getPhoto(String uniqueID, String type) {
IUser user = getReadOnlyUser(uniqueID);
byte photo[] = user.getBinaryAttribute("com.sap.ip.collaboration.ume", "photo" + type);
return new ByteArrayInputStream(photo);
So I would assume, that the photo is uploaded into the UME.
Romano

How to find who has created the condition records

hi all,
in POF1 condition records were created.for material and plant.how to find who has created condition records for the material and plant.
is there any way to find who has created please help me out.
thanks
sunny

Hi,
There are two ways of finding the who has created the ondition record.
01. This is through the sales order-> Item details level-> condtion Tab----> Select the condition type and click on dispaly condition record below in the same creen. Then Goto tab on the menu and select the overview of the condition record. After do so you will have the details of diffrenr tabs. In this you need to select the Administrative data for the person who had created the condition record.
02. Goto T. Code VK13 and give your condition type for which you need to find the person created the record. Select the header details tab for the person who had created the record.
Hope this is fine with you.
Bye & Enjoy SAP.
Koganti

Dropdowm box instead of Searchfield in Who Is Who iview

Hi All,
I have a requirement in Who Is Who iview that instead of search field I need dropdown box which lists user,groups,rooms etc. Is it possible? I have find the default par file but i couldnt find any code there....,
Regards
Balasubramaniam

Hi Bala
Give a try with this
Link:[Link|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/645d4357-0701-0010-07bd-a2ea8c4d0aaf]
I didnt check whether ur req can be met exactly...
But this way, i think it can be possible..
Regards
BP

How-To Guide Who is Who iView

Similar Messages

Maybe you are looking for