How to handle 6 X 16 matrix in smartform

Hello Experts,
I've a requirement where on TEXT FIELD I need to display 16 X 16 values. For example here is my matrix
Header 1
Header 2
Header 3
Header 4
Header 5
Header 6
Header 7
Header 8
Header 9
Header 10
Header 11
Header 12
Header 13
Header 14
Header 15
Header 16
DG
COS
ECQ
SDL
SPU
SPH
COL
TPY
DEC
MUL
RDL
BYO
BYD
ACC
RPU
SIG
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Above I've only show 1 possibility where DG can have value with any other column. Now you can think off the same for COS, ECQ and so on. Then as next step any two can have values let say DG and COS and any other can have value and then three can have value and so on.
When I tried to add conditions for all 16 X 16 possibilities then at some point of time I get short dump and here is the description.
A jump distance is too large and cannot be generated.
A control structure or a routine with "CHECK" or "EXIT" contains
too many ABAP statements.
Can somebody please help me to find a solution of this requirement.
Many thanks in advance.

Many thanks for both of your input. Actually I'm new to smartform and don't understand the idea. So here is how I've my smartform looks like.
Service cell has a bunch of text objects to display details and TOTAL_V cell has so many text objects which hold total values to display and here is the output of the form.
So based on my form and output what change I should make to achieve 16 * 16 matrix on 'Service and Total column'.
Many thanks in advance.

Similar Messages

How to Handle Blank Field Value based Condition in SmartForms

Dear Sir,
In SMARTFORM , we need to define a Condition that incase Field Value is not equal to BLANK value (blank means that field is empty) then a specific text gets printed .
Our problem is that We do not know as how to define Empty Field Value based condition .
Had it been Non Empty Field value based condition then solution was simple and could be done in following way :
Field Value R Comparision Value
WA_KZDKZ = 'X'
In our case , we need to give Blank (Empty Value) instead of 'X' .
Kindly help us pl .
Rgds
B Mittal

Hi,
To handle blank field values in SMARTFORMS,
Go to the conditions tab in your SMARTFORM and give condition there
Field Comparision operator value
<Field name> <> Here symbol is diff space.
eg:
wa_mara-matnr =/ space.
Regards,
Santosh Kumar M.

How to handle Scrollbar's event in the Form Block !

I want to create three Block like
Block : X-axis , Source From View
Block : Y-axis , Source From View
Block : Cell , Source From Stored Procedure.
The relation is (X-axis , Cell) , (Y-axis ,Cell).
Then , if i scroll X-axis or Y-axis Scrollbar , then Cell will change !
Problem : If X-axis Cursor record does not change , the Cell's Data will not refresh.
Can tell me how to handle the scrollbar's event , Thank.

Thank you.
The Cell's behavior is a matrix , the relation will execute when X,Y record is changed !
if you move the scrollbar , will chanage block's data , but the cursor record does not change another!.
If i use JaveBean to handle it , possible ?
Using Form 6i .

How to Convert spool which is for smartform output to PDF?

how to Convert spool which is for smartform output to PDF?
CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF' is not working for smartform output,
if i use this there will be error spool not contain list output?
than whats the function module or way to convert spool contain smartform output to pdg?
regards,

Procedure
 When we activate the Smartform the system generates a Function Module. The function module name we can get from Smartfrom screen from menubar
Environment => Function Module_Name . In a report we can get this Function module name by calling a Function Module standard SSF_FUNCTION_MODULE_NAME. This function module at runtime calls the FM generated by smartform, which in turn is then used to pass data from the report to Smartform. In the report given below the FM generated is /1BCDWB/SF00000152 . In this FM we can see CONTROL_PARAMETERS in import tab. This is of type SSFCTRLOP. We need to set the GETOTF of this to be X. Setting this field will activate the OTF field in smartform.
In export tab of the FM generated by smartform we can see a parameter JOB_OUTPUT_INFO which is of type SSFCRESCL. The SSFCRESCL is a structure of having one of fields as OTFDATA. OTFDATA in turn is a table of type ITCOO. ITCOO has two fields TDPRINTCOM and TDPRINTPAR. TDPRINTCOM represents command line of OTF format data and TDPRINTPAR contains command parameters of OTF format data.
In every Smartform output in OTF format, TDPRINTCOM begins and ends with //. EP represents the end-of-page value for TDPRINTCOM field.
In addition we need to set few fields at the place where we call this FM(generated by smartform) in our program. While calling this FM we should set control_parameters, output_options, user_settings and job_putput_info fields as shown in program.
Once these settings are done we can call Function Module CONVERT_OTF to convert the OTF data of smartfrom output to PDF data format. Once these are done we can call method cl_gui_fronted_services=>file_save_dialog to specify the directory path where we want to save the output PDF file. After this we can call Function Module GUI_DOWNLOAD to download the PDF file on our local system.
Here is a sample code of program to perform the function.
SAMPLE CODE
[code]*&---------------------------------------------------------------------*
*& Report ZAMIT_SMART_FORM_PDF *
REPORT ZAMIT_SMART_FORM_PDF .
data: carr_id type sbook-carrid,
 cparam type ssfctrlop,
 outop type ssfcompop,
 fm_name type rs38l_fnam.
DATA: tab_otf_data TYPE ssfcrescl,
 pdf_tab LIKE tline OCCURS 0 WITH HEADER LINE,
 tab_otf_final TYPE itcoo OCCURS 0 WITH HEADER LINE,
 file_size TYPE i,
 bin_filesize TYPE i,
 FILE_NAME type string,
 File_path type string,
 FULL_PATH type string.
parameter: p_custid type scustom-id default 1.
select-options: s_carrid for carr_id default 'LH' to 'LH'.
parameter: p_form type tdsfname default 'ZAMIT_SMART_FORM'.
data: customer type scustom,
 bookings type ty_bookings,
 connections type ty_connections.
start-of-selection.
***************** suppressing the dialog box for print preview****************************
outop-tddest = 'LP01'.
cparam-no_dialog = 'X'.
cparam-preview = SPACE.
cparam-getotf = 'X'.
select single * from scustom into customer where id = p_custid.
check sy-subrc = 0.
select * from sbook into table bookings
 where customid = p_custid
 and carrid in s_carrid
 order by primary key.
select * from spfli into table connections
 for all entries in bookings
 where carrid = bookings-carrid
 and connid = bookings-connid
 order by primary key.
call function 'SSF_FUNCTION_MODULE_NAME'
 exporting formname = p_form
* variant = ' '
* direct_call = ' '
 importing fm_name = fm_name
 exceptions no_form = 1
 no_function_module = 2
 others = 3.
if sy-subrc <> 0.
 message id sy-msgid type sy-msgty number sy-msgno
 with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
 exit.
endif.
* calling the generated function module
call function fm_name
 exporting
* archive_index =
* archive_parameters =
 control_parameters = cparam
* mail_appl_obj =
* mail_recipient =
* mail_sender =
 output_options = outop
 user_settings = SPACE
 bookings = bookings
 customer = customer
 connections = connections
 importing
* document_output_info =
 job_output_info = tab_otf_data
* job_output_options =
 exceptions formatting_error = 1
 internal_error = 2
 send_error = 3
 user_canceled = 4
 others = 5.
if sy-subrc <> 0.
* error handling
 message id sy-msgid type sy-msgty number sy-msgno
 with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
tab_otf_final[] = tab_otf_data-otfdata[].
CALL FUNCTION 'CONVERT_OTF'
EXPORTING
 format = 'PDF'
 max_linewidth = 132
* ARCHIVE_INDEX = ' '
* COPYNUMBER = 0
* ASCII_BIDI_VIS2LOG = ' '
IMPORTING
 bin_filesize = bin_filesize
* BIN_FILE =
TABLES
 otf = tab_otf_final
 lines = pdf_tab
EXCEPTIONS
 err_max_linewidth = 1
 err_format = 2
 err_conv_not_possible = 3
 err_bad_otf = 4
 OTHERS = 5
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL METHOD cl_gui_frontend_services=>file_save_dialog
* EXPORTING
* WINDOW_TITLE =
* DEFAULT_EXTENSION =
* DEFAULT_FILE_NAME =
* FILE_FILTER =
* INITIAL_DIRECTORY =
* WITH_ENCODING =
* PROMPT_ON_OVERWRITE = 'X'
CHANGING
 filename = FILE_NAME
 path = FILE_PATH
 fullpath = FULL_PATH
* USER_ACTION =
* FILE_ENCODING =
* EXCEPTIONS
* CNTL_ERROR = 1
* ERROR_NO_GUI = 2
* NOT_SUPPORTED_BY_GUI = 3
* others = 4
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*************downloading the converted PDF data to your local PC********
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
 bin_filesize = bin_filesize
 filename = FULL_PATH
 filetype = 'BIN'
* APPEND = ' '
* WRITE_FIELD_SEPARATOR = ' '
* HEADER = '00'
* TRUNC_TRAILING_BLANKS = ' '
* WRITE_LF = 'X'
* COL_SELECT = ' '
* COL_SELECT_MASK = ' '
* DAT_MODE = ' '
* CONFIRM_OVERWRITE = ' '
* NO_AUTH_CHECK = ' '
* CODEPAGE = ' '
* IGNORE_CERR = ABAP_TRUE
* REPLACEMENT = '#'
* WRITE_BOM = ' '
* TRUNC_TRAILING_BLANKS_EOL = 'X'
IMPORTING
 filelength = file_size
TABLES
 data_tab = pdf_tab
* FIELDNAMES =
EXCEPTIONS
 file_write_error = 1
 no_batch = 2
 gui_refuse_filetransfer = 3
 invalid_type = 4
 no_authority = 5
 unknown_error = 6
 header_not_allowed = 7
 separator_not_allowed = 8
 filesize_not_allowed = 9
 header_too_long = 10
 dp_error_create = 11
 dp_error_send = 12
 dp_error_write = 13
 unknown_dp_error = 14
 access_denied = 15
 dp_out_of_memory = 16
 disk_full = 17
 dp_timeout = 18
 file_not_found = 19
 dataprovider_exception = 20
 control_flush_error = 21
 OTHERS = 22
IF sy-subrc <> 0.
ENDIF.
[/code]
Thanks and Regards,
Pavankumar

How to handle exception CX_SY_REF_IS_INITIAL

hi experts,
im working on a test scenario for abap mapping in SAP XI im getting this error
An exception with the type CX_SY_REF_IS_INITIAL occurred, but was neither handled locally, nor declared in a RAISING clause Dereferencing of the NULL reference
i understand that i need to catch this exception in the abap coding but i'm not familiar with oops concepts
can any one please suggest me how to handle this exception for the following code...
method IF_MAPPING~EXECUTE.
break x1149.
* initialize iXML
TYPE-POOLS: ixml.
class cl_ixml definition load.
** Instances & Variable declaration =======================
* instance main factory
TYPES: BEGIN OF t_xml_line,
 data(256) TYPE x,
 END OF t_xml_line.
DATA: l_ixml TYPE REF TO if_ixml,
* instance input stream factory
 l_streamfactory TYPE REF TO if_ixml_stream_factory,
* instance input stream
l_istream TYPE REF TO if_ixml_istream,
* instance input document
l_document TYPE REF TO if_ixml_document,
* instance parse input document
l_parser TYPE REF TO if_ixml_parser,
* instance for elements within the nodes
node TYPE REF TO if_ixml_node,
*instance of nodemap
nodemap TYPE REF TO if_ixml_named_node_map,
* instance for iterator
iterator TYPE REF TO if_ixml_node_iterator,
name TYPE string,
value TYPE string,
* instance main factory
 o_ixml TYPE REF TO if_ixml,
* instance output document
 o_document TYPE REF TO if_ixml_document,
* instance output stream
o_istream TYPE REF TO if_ixml_ostream,
* instance parse output document
o_parser TYPE REF TO if_ixml_parser,
* instance fot renderer
renderer type ref to if_ixml_renderer,
irc type i,
l_xml_size TYPE i,
*ROOT ELEMENT
l_element_MT_DEMANDTEC_COST TYPE REF TO if_ixml_element,
*NEXT CHILD ELEMENT FROM THE ABOVE PARENT
l_element_DT_DEMANDTEC TYPE REF TO if_ixml_element,
*CHILDREN1 ELEMENT FOR DT_DEMANDTEC
l_element_DT_WHSE TYPE REF TO if_ixml_element,
*CHILDREN2 ELEMENT FOR DT_DEMANDTEC
l_element_DT_DC TYPE REF TO if_ixml_element,
*CHILDREN3 ELEMENT FOR DT_DEMANDTEC
l_element_DT_PLANT TYPE REF TO if_ixml_element,
*CHILDREN4 ELEMENT FOR DT_DEMANDTEC
l_element_DT_QTY TYPE REF TO if_ixml_element.
*saving the xml document
DATA: l_xml_table TYPE TABLE OF t_xml_line.
types: begin of t_source,
 whse(5),
 dc(4) ,
 plant(4),
 qty type i,
 end of t_source.
types: tt_source TYPE STANDARD TABLE OF t_source.
data: wa_source type t_source.
data: it_source TYPE tt_source,
 ivalue type string.
* Procedures and business logic =======================================
* Creating the main iXML factory
l_ixml = cl_ixml=>create( ).
* Creating a stream factory
l_streamfactory = l_ixml->create_stream_factory( ).
* create input stream
l_istream = l_streamfactory->create_istream_xstring( source ).
* initialize input document
l_document = l_ixml->create_document( ).
* Create a Parser
l_parser = l_ixml->create_parser( stream_factory = l_streamfactory
 istream = l_istream
 document = l_document ).
* parse input document
l_parser->parse( ).
* Validate a document
l_parser->set_validating( mode = if_ixml_parser=>co_validate ).
* Parse the stream
IF l_parser->parse( ) NE 0.
 IF l_parser->num_errors( ) NE 0.
 DATA: parseerror TYPE REF TO if_ixml_parse_error,
 str TYPE string,
 i TYPE i,
 count TYPE i,
 index TYPE i.
 count = l_parser->num_errors( ).
 WRITE: count, ' parse errors have occured:'.
 index = 0.
 WHILE index < count.
 parseerror = l_parser->get_error( index = index ).
 i = parseerror->get_line( ).
 WRITE: 'line: ', i.
 i = parseerror->get_column( ).
 WRITE: 'column: ', i.
 str = parseerror->get_reason( ).
 WRITE: str.
 index = index + 1.
 ENDWHILE.
 ENDIF.
ENDIF.
* Process the document
IF l_parser->is_dom_generating( ) EQ 'X'.
 refresh : it_source.
 node ?= l_document.
 CHECK NOT node IS INITIAL.
* create a node iterator
 iterator = node->create_iterator( ).
* get current node
 node = iterator->get_next( ).
* loop over all nodes
 WHILE NOT node IS INITIAL.
 CASE node->get_type( ).
 WHEN if_ixml_node=>co_node_element.
* element node
 name = node->get_name( ).
 nodemap = node->get_attributes( ).
 WHEN if_ixml_node=>co_node_text.
* text node
 value = node->get_value( ).
 if name eq 'DT_WHSE'.
 wa_source-whse = value.
 ELSEIF name eq 'DT_DC'.
 wa_source-DC = value.
 ELSEIF name eq 'DT_PLANT'.
 wa_source-PLANT = value.
 ELSEIF name eq 'DT_QTY'.
 wa_source-QTY = value.
 COLLECT wa_source INto it_source.
 CLEAR wa_source.
 ENDIF.
 endcase.
 node = iterator->get_next( ).
 endwhile.
ENDIF.
loop at it_source into wa_source .
 at first.
* Creating a ixml factory
 o_ixml = cl_ixml=>create( ).
* Creating the dom object model
 o_document = l_ixml->create_document( ).
 endat.
* Build and Fill root node MT_DEMANDTEC_COST
 AT FIRST.
 l_element_MT_DEMANDTEC_COST =
O_document->create_simple_element(
 name = 'MT_DEMANDTEC_COST'
 parent = o_document ).
 ENDAT.
* Build and Fill Child node DT_DEMANDTEC for parent
* MT_DEMANDTEC_COST
 l_element_DT_DEMANDTEC = O_document->create_simple_element(
 name = 'DT_DEMANDTEC'
 parent = l_element_MT_DEMANDTEC_COST ).
* Build and Fill Child node1 DT_WHSE for parent DT_DEMANDTEC
 ivalue = wa_source-WHSE.
 l_element_DT_WHSE = O_document->create_simple_element(
 name = 'DT_WHSE'
 VALUE = ivalue
 parent = l_element_DT_DEMANDTEC ).
* Build and Fill Child node2 DT_WHSE for parent DT_DEMANDTEC
 ivalue = wa_source-DC.
 l_element_DT_DC = O_document->create_simple_element(
 name = 'DT_DC'
 VALUE = ivalue
 parent = l_element_DT_DEMANDTEC ).
* Build and Fill Child node3 DT_WHSE for parent DT_DEMANDTEC
 ivalue = wa_source-PLANT.
 l_element_DT_PLANT = O_document->create_simple_element(
 name = 'DT_PLANT'
 VALUE = ivalue
 parent = l_element_DT_DEMANDTEC ).
* Build and Fill Child node4 DT_QTY for parent DT_DEMANDTEC
 ivalue = wa_source-QTY.
 l_element_DT_QTY = O_document->create_simple_element(
 name = 'DT_QTY'
 VALUE = ivalue
 parent = l_element_DT_DEMANDTEC ).
endloop.
* render document ======================================================
* create output stream
o_istream = l_streamfactory->create_ostream_xstring( result ).
* Connect internal XML table to stream factory
o_istream = l_streamfactory->create_ostream_itable( table =
l_xml_table ).
renderer = o_ixml->create_renderer( ostream = o_istream
 document = o_document ).
irc = renderer->render( ).
* how do i catch the exception for type CX_SY_REF_IS_INITIAL ...?
endmethod.
full reward points for answers.
Thanks & Regards,
Uday Kumar.
Edited by: UDAY on May 6, 2008 9:32 PM

Hi Uday,
Its occurs because you're trying to access a objects with null reference. Or you forgot to create an instance or an error occurs during the instance creation. So You should put all your "Procedures and business logic" inside a Try/catch block. as follow.
" Define a class exception object to get error message......
DATA o_exception TYPE REF TO cx_sy_ref_is_initial.
"// Use the statment Try block to catch the error.
TRY.
* Creating the main iXML factory
l_ixml = cl_ixml=>create( ).
* Creating a stream factory
l_streamfactory = l_ixml->create_stream_factory( ).
* create input stream
l_istream = l_streamfactory->create_istream_xstring( source ).
* initialize input document
l_document = l_ixml->create_document( ).
* Create a Parser
l_parser = l_ixml->create_parser( stream_factory = l_streamfactory
 istream = l_istream
 document = l_document ).
* parse input document
l_parser->parse( ).
* Validate a document
l_parser->set_validating( mode = if_ixml_parser=>co_validate ).
* Parse the stream
IF l_parser->parse( ) NE 0.
 IF l_parser->num_errors( ) NE 0.
 DATA: parseerror TYPE REF TO if_ixml_parse_error,
 str TYPE string,
 i TYPE i,
 count TYPE i,
 index TYPE i.
 count = l_parser->num_errors( ).
 WRITE: count, ' parse errors have occured:'.
 index = 0.
 WHILE index < count.
 parseerror = l_parser->get_error( index = index ).
 i = parseerror->get_line( ).
 WRITE: 'line: ', i.
 i = parseerror->get_column( ).
 WRITE: 'column: ', i.
 str = parseerror->get_reason( ).
 WRITE: str.
 index = index + 1.
 ENDWHILE.
 ENDIF.
ENDIF.
* Process the document
IF l_parser->is_dom_generating( ) EQ 'X'.
 refresh : it_source.
 node ?= l_document.
 CHECK NOT node IS INITIAL.
* create a node iterator
 iterator = node->create_iterator( ).
* get current node
 node = iterator->get_next( ).
* loop over all nodes
 WHILE NOT node IS INITIAL.
 CASE node->get_type( ).
 WHEN if_ixml_node=>co_node_element.
* element node
 name = node->get_name( ).
 nodemap = node->get_attributes( ).
 WHEN if_ixml_node=>co_node_text.
* text node
 value = node->get_value( ).
 if name eq 'DT_WHSE'.
 wa_source-whse = value.
 ELSEIF name eq 'DT_DC'.
 wa_source-DC = value.
 ELSEIF name eq 'DT_PLANT'.
 wa_source-PLANT = value.
 ELSEIF name eq 'DT_QTY'.
 wa_source-QTY = value.
 COLLECT wa_source INto it_source.
 CLEAR wa_source.
 ENDIF.
 endcase.
 node = iterator->get_next( ).
 endwhile.
ENDIF.
loop at it_source into wa_source .
 at first.
* Creating a ixml factory
 o_ixml = cl_ixml=>create( ).
* Creating the dom object model
 o_document = l_ixml->create_document( ).
 endat.
* Build and Fill root node MT_DEMANDTEC_COST
 AT FIRST.
 l_element_MT_DEMANDTEC_COST =
O_document->create_simple_element(
 name = 'MT_DEMANDTEC_COST'
 parent = o_document ).
 ENDAT.
* Build and Fill Child node DT_DEMANDTEC for parent
* MT_DEMANDTEC_COST
 l_element_DT_DEMANDTEC = O_document->create_simple_element(
 name = 'DT_DEMANDTEC'
 parent = l_element_MT_DEMANDTEC_COST ).
* Build and Fill Child node1 DT_WHSE for parent DT_DEMANDTEC
 ivalue = wa_source-WHSE.
 l_element_DT_WHSE = O_document->create_simple_element(
 name = 'DT_WHSE'
 VALUE = ivalue
 parent = l_element_DT_DEMANDTEC ).
* Build and Fill Child node2 DT_WHSE for parent DT_DEMANDTEC
 ivalue = wa_source-DC.
 l_element_DT_DC = O_document->create_simple_element(
 name = 'DT_DC'
 VALUE = ivalue
 parent = l_element_DT_DEMANDTEC ).
* Build and Fill Child node3 DT_WHSE for parent DT_DEMANDTEC
 ivalue = wa_source-PLANT.
 l_element_DT_PLANT = O_document->create_simple_element(
 name = 'DT_PLANT'
 VALUE = ivalue
 parent = l_element_DT_DEMANDTEC ).
* Build and Fill Child node4 DT_QTY for parent DT_DEMANDTEC
 ivalue = wa_source-QTY.
 l_element_DT_QTY = O_document->create_simple_element(
 name = 'DT_QTY'
 VALUE = ivalue
 parent = l_element_DT_DEMANDTEC ).
endloop.
* render document ======================================================
* create output stream
o_istream = l_streamfactory->create_ostream_xstring( result ).
* Connect internal XML table to stream factory
o_istream = l_streamfactory->create_ostream_itable( table =
l_xml_table ).
renderer = o_ixml->create_renderer( ostream = o_istream
 document = o_document ).
irc = renderer->render( ).
" The Statement CATCH define a block that catches the exceptions of the
" exception class cx_sy_ref_is_initial
 CATCH cx_sy_ref_is_initial INTO o_exception.
" If you need to get the error message text do as follow
DATA errorMsg type string.
" Get the message text
errorMsg = o_exception->GET_TEXT( ).
" Display the error information
MESSAGE errorMsg TYPE 'I'.
ENDTRY.
The TRY block defines a guarded area whose class-based exceptions can be caught in the subsequent CATCH blocks. If no exception occurs in the TRY block and it reaches its end, the system continues the processing after ENDTRY. If a class-based exception occurs in the TRY block, the system searches for an exception handler in the same or an external TRY control structure.
Font: SAP Help
You can see a how to create and use an exception in this example [ ABAP Objects - Defining a Class-based exceptions|https://wiki.sdn.sap.com/wiki/x/19w] .
Best Regards.
Marcelo Ramos

How to handle null values in RTF templates

Hi - I have two groups in a report for different SQL and two formulas for each group, CF_ELE_CNT and CF_ELE_CNT1. In the template I use the below code to print or not print a section.
<?if:number(CF_ELE_CNT +CF_ELE_CNT1) >0?>
The problem is when there is no data in the second group its not creating the XML tag for CF_ELE_CNT1, though CF_ELE_CNT has 13, it still does not print that partucular section. If I remove CF_ELE_CNT1 from the condition it works fine. I was wondering how to handle this.
Any help would be appreciated!!
Thanks,
Rav

Hey Rav,
You can add a check to identify it the element/tag is present or not
<?if:(CF_ELE_CNT1)?> will give true, if the element is present otherwise falsesince you are adding the two elements, you have to add a or condition.
<?if:(CF_ELE_CNT and number(CF_ELE_CNT) >0 ) or ( CF_ELE_CNT1 and CF_ELE_CNT1 >0)?>

How to handle file on application server without coading?

HI all,
can anybody tell me How to handle file on application server without coading? Is there any solution?
Thanks in advance.

> can anybody tell me How to handle file on application server without coading? Is there any solution?
what is that you want to handle. what you do if you don't code ...

Thoughts on how LabVIEW handles checkout of file from SCC when file already open

When you already have a file/project open in LabVIEW and it is set to read only because you haven't checked it out, you can go into SCC and do a checkout then save the file immediately. The issue with this is, if your local copy doesn't match the copy in SCC, you will probably be overwriting changes. Sometimes this is convenient because if you have ever edited a MS Word file and then gone to save and it won't let you because it was opened as read-only...then that sucks because you either lose your work, or have to do a copy of the entire word file->close the program->re-open as writable, then paste. This can be avoided with the "LabVIEW way", but the "MS Word" way seems much safer because it forces you to conscioiusly make the file writable (by either checking it out or manually write clicking and changing to writable) BEFORE opening it. I just wanted people's opinions on how LabVIEW handles this, and if there would be a better way.
CLA, LabVIEW Versions 2010-2013

VSS
CLA, LabVIEW Versions 2010-2013

How to handle password changes if we implement singlesignon between BO& BI7

Hi,
As we know ,we can implement single signon between BO and SAP BI 7, by importing roles and users through CMC and by selecting the option "Use Single signon during report refresh time".
My doubt here is, When we import roles from SAP and Auto import the users, is it only the SAP usernames that are stored in BO repository or both username and password. If second case holds true then how to handle/manage password change for a user who is already imported in BO sometime back?
Would the password changes be reflected automatically in BO?
Please guide me if you think that I'm thinking in a wrong direction.

Hi Naresh,
password changes are reflected automatically in BO. BO just forwards the data to the SAP side and it does the real authentification.
Regards,
Stratos
PS: Keep in mind that you cannot change the SAP password on the BO login screen if your SAP password has expired. You have to do this with the SAP client (SAP GUI)

How to handle rpc/encoded style messages using BizTalk?

I am integrating with a lot of services and one of our customers has a service with rpc/encoded style
I could consume and generate schema from their wsdl file via BizTalk consume WCF wizard.
Once I am trying to call the service with request message that generated from the schema, it is giving an error that can not desterilize the first element of the message.
No Deserializer found to deserialize a 'FieldName' using encoding style 'null'
I compared the stub xml request message from SaopUI and I noticed that the xml expecting the data type with the element like this .
<soapenv:Envelope xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:wsb="WSBanka">
<soapenv:Header/>
<soapenv:Body>
<wsb:bnkBorcsorgulama soapenv:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/">
<sozlesmeNo xsi:type="xsd:string">?</sozlesmeNo>
<bankaKodu xsi:type="xsd:string">?</bankaKodu>
<anahtar xsi:type="xsd:string">?</anahtar>
</wsb:bnkBorcsorgulama>
</soapenv:Body>
</soapenv:Envelope>
On the other hand, I got the request of the message from Fiddler using the BizTalk , and the generate xml of the BizTalk schema without the data type.
<soapenv:Envelope xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:wsb="WSBanka">
<soapenv:Header/>
<soapenv:Body>
<wsb:bnkBorcsorgulama>
<sozlesmeNo>?</sozlesmeNo>
<bankaKodu>?</bankaKodu>
<anahtar>?</anahtar>
</wsb:bnkBorcsorgulama>
</soapenv:Body>
</soapenv:Envelope>
In SoapUi, if I remove a datatype from the message, I will get same error from the BizTalk request.
I read some articles that rpc/encoded style are not supported but I am not sure and these articles are not clear.
I also read that it was supported with Soap adapter but now it is deprecated.
So, Is there any one has an experience in rpc/encoded style messages and how to handle these message in BizTalk or is there any work around to handle these messages?
Your inputs really appreciate it.
Thanks in advance,
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer

Hi,
Please refer to the document which might help you:
#RPC/Encoded Style
http://www.c-sharpcorner.com/UploadFile/martinkropp/DesigningInteroperableWebService11232005044847AM/DesigningInteroperableWebService.aspx

How to handle the OK button of the parameters prompt of a crystal report

Hi,
how to handle the OK button of the parameters prompt of a crystal report in vba.NET?
I want to use the parameter prompt from the crystal report itself and I want to know when the report is ready. I need to export programatically by sending email to a list of employees after the parameters has been set. The emails I send depends on the results of the report.
Im using a CrystalReportViewer control in VS2010 and Crystal Report for VS2010 v13.0.1.220.

Right. But the parameter screen is driven by the viewer. Unless you create your own parameter screen and pass the parameters to the report via code.
Another thing I am not sure about:
"Then by code I want to read all the employees id from the report and send email to them with specified pages of the report. (1 page per employee)"
How do you plan on reading the employee ID from the report? I am not aware of any API that will read a value in a report so that you can then decide what page to send to whom.
I think you're approaching this kinda backwards. A question to ask is; can you do what you are trying to do in code in the CR designer? If not, using APIs will not work either. I suspect your approach should be a report that uses an employee filter. Run the report for employee x, get the report populated with the data for that employee and email it. Repeat for employee x1, employee x2, etc.
- Ludek

Suggestions on how to handle "Hacked Skype Account...

I. User Can Still Access Account
Run a full anti-virus scan (and other security scans available in your computer). This may help to detect and remove any elements that the hacker may have used in gaining access to your account.
2. Immediately Change Your Password, preferably with something that is difficult to guess, and not related or totally different from the passwords you previously used.
3. If the hacker also changed your registered email address, changed it back to your own email address. Here is the link on how to change your registered email address;
https://support.skype.com/en/faq/FA96/How-do-I-change-my-email-address-or-add-another-email-address-...
4. Contact Skype to report the incident. They may be able to provide you with further explanation, clarification and helpful advice. Use the Subject Security & Privacy >> Identity theft / Account takeover.
https://support.skype.com/support_selection
5. You can also contact your bank to inform or alert them of the incident if there is a payment method registered in your Skype account.   They may also be able to provide you with additional suggestions, advice, or options.
II. User Can Not Access Account (Password Has Been Changed) – Registered Email Address Not Changed.
Run a full anti-virus scan (and other security scans available in your computer). This may help to detect and remove any elements that the hacker may have used in gaining access to your account.
2. Open the “Forgotten Your Password” page, then request for a new password to be sent to your registered email address;
https://login.skype.com/account/password-reset-request
3. Contact Skype to report the incident. They may be able to provide you with further explanation, clarification and helpful advice.   Select the subject Security & Privacy >> Identity theft / Account takeover.
https://support.skype.com/support_request
4. You can also contact your bank to inform or alert them of the incident if there is a payment method registered in your Skype account.   They may also be able to provide you with additional suggestions, advice, or options.
III. User Can Not Access Account (Password Has Been Changed) – Registered Email Address Has Also Been Changed.
Run a full anti-virus scan (and other security scans available in your computer). This may help to detect and remove any elements that the hacker may have used in gaining access to your account.
2. If your account has a billing or purchase history in the last 6 months, you can request for a new password without the need of your registered email address. just click the link below;
https://login.skype.com/account/password-automation
After acquiring a new password, you can proceed in changing the registered email address to your own email address;
  https://support.skype.com/en/faq/FA96/How-do-I-change-my-email-address-or-add-another-email-address-...
3. Contact Skype to report the incident. They may be able to provide you with further explanation, clarification and helpful advice. They will most likely ask you to provide some details in order for them to verify that you are the real account owner. Select subject/topic Security & Privacy >> Identity theft / Account takeover.
https://support.skype.com/support_request
4. You can also contact your bank to inform or alert them of the incident if there is a payment method registered in your Skype account.   They may also be able to provide you with additional suggestions, advice, or options.
5. If your account has no recent purchase, it may no longer be possible to retrieve your account.   Still you can try to contact Skype to know if you have other possible options.
Note: If for some reason the links to contact customer support don't work, you can also send an email to [email protected]
Useful Links
A. Protecting your Computer
http://www.skype.com/intl/en-gb/security/online-safety/#protecting
B. Skype Security - Protecting your online safety, security and privacy.
http://www.skype.com/intl/en/security/
C. What can I do if someone has taken over my account? (from support.skype.com)
https://support.skype.com/en-us/faq/FA10920/What-can-I-do-if-someone-has-taken-over-my-account;jsess...
D. How can I contact Skype Customer Service?
https://support.skype.com/en/faq/FA1170/How-can-I-contact-Skype-Customer-Service
CONTACT SKYPE CUSTOMER SERVICE   |  HOW TO RECORD SKYPE VIDEO CALLS  | HOW TO HANDLE SUPICIOUS CALLS AND MESSAGES   |  WINDOWS PROBLEMS TROUBLESHOOTING   |  SKYPE DOWNLOAD LINKS
MORE TIPS, TRICKS AND UPDATES AT
skypefordummies.blogspot.com

Skype is useless for this.
They will claim that you the user are responsible, and that they don't need to do anyhing.
So....
Do not allow Skype to autorefill your account when it runs low on balance, and do not store a creditcard, or other payment info with them.
Each user is liable for whatever the hackers can steal.
As this is from recent personal experience, I recommend you to never keep payment information on file with Skype.

How to handle dbms_xmldom with no data values.(no_data_found error in dom)

hi,
i have below block,
DECLARE
doc dbms_xmldom.DOMDocument;
node dbms_xmldom.DOMNode;
elem dbms_xmldom.DOMElement;
cur_node dbms_xmldom.DOMNode;
root_elem_data dbms_xmldom.DOMElement;
root_elem_tab dbms_xmldom.DOMElement;
root_node_data dbms_xmldom.DOMNode;
mode_elmn dbms_xmldom.DOMElement;
mode_node dbms_xmldom.DOMNode;
mode_text dbms_xmldom.DOMText;
doc1 DBMS_XMLDOM.DOMDOCUMENT;
root_node_data1 DBMS_XMLDOM.DOMNODE;
child_document DBMS_XMLDOM.DOMDOCUMENT;
child_rootnode DBMS_XMLDOM.DOMNODE;
V_CLOB CLOB;
v_doc CLOB;
v_EMP CLOB;
v_output_filename VARCHAR2(300) := 'SPOOL_DIR/'||'EMP_XML_FILE.xml';
l_xmltype XMLTYPE;
BEGIN
doc := dbms_xmldom.newDOMDocument;
node := dbms_xmldom.makeNode(doc);
dbms_xmldom.setversion(doc, '1.0');
dbms_xmldom.setCharset(doc, 'UTF8');
elem := dbms_xmldom.createElement(doc, 'PartnerInfo');
dbms_xmldom.setAttribute(elem,'xmlns','EMP');
cur_node := dbms_xmldom.appendChild(node, dbms_xmldom.makeNode(elem));
mode_elmn := dbms_xmldom.createElement(doc, 'EMPLOYEE');
mode_node := dbms_xmldom.appendChild(cur_node,dbms_xmldom.makeNode(mode_elmn));
BEGIN
SELECT value(e) INTO l_xmltype
FROM TABLE(XMLSequence(Cursor(SELECT * FROM EMP1 where EMPNO=7501))) e;
child_document := DBMS_XMLDOM.newDOMDocument(l_xmltype);
root_node_data1 := dbms_xmldom.importNode(doc,dbms_xmldom.makeNode(dbms_xmldom.getDocumentElement(child_document)),TRUE);
root_node_data1 := DBMS_XMLDOM.appendChild(root_node_data, root_node_data1);
EXCEPTION
WHEN OTHERS THEN
Dbms_Output.Put_Line('Error in SELECT stmt(UC_PARTNER_MS):::'||'error::'||SQLERRM);
END;
dbms_lob.createtemporary(v_doc, true);
dbms_xmldom.writeToClob(doc,v_doc,'UTF8');
v_EMP:= v_doc;
dbms_xmldom.writeToFile(DOC,v_output_filename,'UTF8');
dbms_xmldom.freeDocument(doc);
--Dbms_Output.Put_Line('THE OUTPUT IS::'||V_EMP);
EXCEPTION
WHEN OTHERS THEN
Dbms_Output.Put_Line('Error in SELECT stmt(UC_PARTNER_MS):::'||'error::'||SQLERRM);
END;
The xml file is 'EMP_XML_FILE.xml'
<empno>U++kYmcVuGchxbh+++++++++++++++1+</empno>
<empname>J</empname>
suppose the empno 7501 is not available in our emp table,
i got error
ORA-03113: end-of-file on communication channel
how to handle xmldom with no data values.
by
siva

hi,
please give the solution
by
siva

How to handle multiple records in BPMN process

Hi All,
We are using Oracle BPM 11g.In my requirement,I am using the database adapter to get the data from table and I need to validate the each record and update the status of that record from the BPM Process.But I dont know how to handle if multiple records come at a time.Can anybody please helpout from this problem.
Thanks in advanced.
Narasimha Rao.

Can you have a look at this post: http://redstack.wordpress.com/2010/09/30/iteratingtraversing-arrays-in-bpm/
It's solving a different problem, but the key is that it's using a multi-instance subprocess to iterate over an array of "things" that need to be acted in. In your case it's the set of results from the db query rather than the set of tests in the example. But the principle is the same. You'd take collection of rows from the DB and process them in a multi-instance subprocess. The text that begins with the following would be good place to start:
"Now let’s implement the body of our process. We will use the Subprocess object to handle the traversal of the array of tests. Drag a Subprocess from the component palette on the right into the process and drop it on the line between the Start and End nodes."
In the loop characteristics you'd define whether you want to execute serially or in parallel.

Have started to get info window from iTune telling "This computer is already associated with an Apple ID. "You can download past purchases on this computer with just one Apple ID every 90 days......" How to handle this situation

"You can download past purchases on this computer with just one Apple ID every 90 days. This computer can be used with a different Apple ID in 63 days." How to handle this situation

https://discussions.apple.com/message/16567363#16567363
From the More Like This section on the right

How to use different page scapes in smartforms

hi
How to use different page scapes in smartforms.
I want Potrait format in the 1st page and Lanscape format in 2nd page is it possible if so plz suggest me an idea

Hi,
It is possible in smart forms, but not in scripts.
we can have 3 tabbed options for pages in smart forms.
General...
Output options
Conditions.
In output options u can define whether a page can portrait or land scape in print attributes.
Reward if helpful.
Regards,
Sandhya

How to handle 6 X 16 matrix in smartform

Similar Messages

Maybe you are looking for