How to handle change of relation with SAP

hi,
suppose i'm an employee of a SAP customer right now (meaning i have an S-ID), and then later on i'm employed by a different SAP customer, triggering a deactivation of my old S-ID, and the creation of a new S-ID, how would the transition of S-IDs be handled? would i find myself not able to login to my account (since naturally my email address would change too)?
or is my S-ID stuck with me for life?
honestly i wouldn't want this to happen (nor do i see this happening), but suppose it did, how would the powers that be handle this?
ryan.

hi Denis,
it depends what kind of data you're trying to delete:)
during the standard output (IDOC) of some documents
you can see a deletion indicator (action), there are also
some document which you can delete on the basis
of specific conditions - for example when somone
sets a rejection indicator in a document this might
mean that the document (or one of it's lines)
was deleted
so basically it depends what kind of data you want
to delete
Regards,
michal

Similar Messages

How to handle common system crashes in SAP Business One until you upgrade to SAP Business One 9.1?

SAP Business One 9.1 is about to release in this year with many feature enhancements in various areas, such as in Business Logic and Localization, Reporting and Analytics, Lifecycle Management and Support, SDK Features for extensibility, Infrastructure and Architecture, etc. , with this upgrade every organization using SAP Business One is also expecting that some previous System Crash problems associated with SAP Business One 8.8 or 9.0, will also be resolved with the advent of 9.1.
But until 9.1 is available in GA, we have to know and follow some procedures to avoid this situation. Through this blog we have addressed ‘How to handle common system crashes in SAP Business One until you upgrade to SAP Business One 9.1’. In below link you can have a look that what common system crash issues been reported and what solution given by the community members:
common system crashes in SAP Business One

Hi,
Thanks for sharing valuable information with us. You may repost this discussion as "Document" or Blog type.
Thanks & Regards,
Nagarajan

How to connect MS-sql server with SAP BW

hi all,
i want the connection procedure to how to connect MS-sql server with SAP BW.so that i can extract the data from ms sql server and can create cubes using that data.please help me in this issue.

Hi Vamshi,
Go through this DOC it explains u how to connect to other data bases like SQL...
[https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/58f4db47-0501-0010-a2bf-ff01b150fdff]
this is a thread related to connect the SQL server..
[DB Connect MS SQL Server;
Regards,
NR
Assign points if helpful...

How do I change my country with a balance in my account

How do I change my country with a balance in my account

Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

How can I change from paying with a credit card to using prepaid for itunes

How can I change from paying with a credit card to using prepaid for itunes on ipad 2 .alrwady have app ID

iTunes Store: Changing Account Information
http://support.apple.com/kb/HT1918
Apple ID Support - Manage Account
http://www.apple.com/support/appleid/manage/
 Cheers, Tom

How can I change the language with the .dat (.bak) file?

How can I change the language with the .dat (.bak) file? Is it legal?
How does it work?
Thanks for answering

https://discussions.apple.com/message/17364930#17364930

HOW KIND OF Standard table related with vk11, vk12 and vk13?

HI, EVERYONE,
HOW KIND OF Standard table related with vk11, vk12 and vk13?
I want to know about how many and how kind Standard table related with vk11, vk12, vk13.
I'v found some table like konp and a601 ~ a609, also I want to know about those table of uses?
I am starting to study about vk11.
please help me.

Hi Reena,
Then main pricing related tables are KONH header details, and KONP item details.
The other tables your have mentioned like A601,A609.............. all these are condition tables, which stored the values which you save for access sequence combination.
Eg : For condition type PR00, lets us assume one key combination customer/material, so these details will be saved in condition table which is initially generated with fields as a part of condition techinque.
So here the table would be A005 i guess or its A006.
So like wise there will be condition tables for each key combination.
Regards
v K

How to solve the problem related with inputing of the text into Wordpress from Firefox 9 and 9.0.1. The problem is that after inputing the formatting gets lost. Taking in account high popularity of Wordpress I suppose the problem is quite serious.

How to solve the problem related with inputing of the text into Wordpress from Firefox 9 and 9.0.1.
The problem is that after inputing the formatting gets lost.
Taking in account high popularity of Wordpress I suppose the problem is quite serious.

Perform the suggestions mentioned in the following articles:
* [https://support.mozilla.com/en-US/kb/Template:clearCookiesCache/ Clear Cookies & Cache]
* [[Troubleshooting extensions and themes]]
* Clipboard not working -> [http://kb.mozillazine.org/Clipboard_not_working]
* Rich Text Editing -> [http://kb.mozillazine.org/Rich_text_editing]
* Update All your Firefox Plugins -> [https://www.mozilla.org/en-US/plugincheck/]
Check and tell if its working.
Might not be related to your problem but some of your Plugins are out-dated
* Update All your Firefox Plugins -> [https://www.mozilla.org/en-US/plugincheck/]
* '''When Downloading Plugins Update setup files, Remove Checkmark from Downloading other Optional Softwares with your Plugins (e.g. Toolbars, McAfee, Google Chrome, etc.)'''

How can I change of page with double click on my I-pod nano 7th generation?

How can I change of page with the double click feature on my I pod nano 7th generation?

I can't really understand what you are asking. Can you elaborate?

How to handle changing IPv6 network configurations

Hi,
I run a Mac Mini as a server with OS X Server 10.8.5/2.2 on it using an internet connection with DS-lite. The server runs fine on a private IPv4 and a public IPv6 assigned by the ISP thrugh my router. Now from time to time (on some really odd days 5 times a day) my ISP decides to change my IPv6 prefix and as a consequence the IPv6 of my server. This results in a warning and some services seem to work not always properly. When I handle the warning and update the network configuration (although all relevant pieces of configuration that are shown along this proces remain unchanged), everything is back to normal.
Now I wonder whether there is better way to handle changing IPv6 prefixes while everything else is unchanged? Any thougths? Thanks. Steffen

I'll add my 2 cents too Sudheer...
I suppose your versioning strategy should take into account your particular circumstances, impact analysis, ESB architecture etc...
In our case it makes sense to version the service operations because we have some consumers that want to stay on the older version & other that want to move with the changing versions...
We've noticed that SAP, with the standard delivered enterprise services also version step the service operations so you esentially have 2 service contracts but one that caters for additional fields/functionality. The consumer uses the service operation that they prefer.
The other possibility, if you are in a position to make the new fields 'optional' then you could do that without impacting all the consumers, the consumers that have the additional info to pass in the request can do so & the other consumers can carry on business as usual.
Then you could also version step the entire service, that would entail making use of a new software component version but this would entail new endpoints & depending on your architecture it could impact all your consumers. If you're using an integrated ESB architecture, your consumers would have one endpoint & the ESB would route the request to the relevant service version.
So you could minise impact on the consumers & develop a good versioning strategy depending on what your current situation is.
Regards, Trevor

How to handle abstract XML elements with XMLBeans

Hello,
I have an xsd that uses abstract elements, and i wanted to ask you how can i create new XML Documents with XMLBeans? My problems is that i don't know how to handle abstaction with XMLBeans.
Let me show you a very simple example to make you understand my problem :
Suppose we have the following schema :
<xsd:schema targetNamespace="http://www.example.org" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns="http://www.example.org">
     <xsd:element name="Customer" type="CustomerType" />
     <xsd:complexType name="CustomerType" abstract="true" />
     <xsd:complexType name="PremiumCustomerType">
          <xsd:complexContent>
               <xsd:extension base="CustomerType">
                    <xsd:sequence>
                         <xsd:element name="CreditCard" type="xsd:string" />
                    </xsd:sequence>
               </xsd:extension>
          </xsd:complexContent>
     </xsd:complexType>
</xsd:schema>I use XMLBeans to create a jar with java classes according the xsd above. Then, in order to create a new xml document i use the following code :
CustomerDocument cd = CustomerDocument.Factory.newInstance();
CustomerType ct = cd.addNewCustomer();
PremiumCustomerType pct = PremiumCustomerType.Factory.newInstance();
ct.changeType(pct.schemaType());With this code i get an XML Document like the following :
<Customer type="PremiumCustomerType" />But after that, i cannot add an element CreditCard into this Customer element. Can anyone help me?

In Indesign there is no way you can directly work on the XML-IN footnote, since indesign won't support XML tags in footnote stream.
To achive that you need to have XSLT/Perl/Indesign Scripting.
This task is achievable, you can create a auto footnote for XML workflow projects.
1. Create an XSLT to transform the footnote to the respective places
2. Change all the "<" ">" to some standard names, since indesign won't accept XML tags in the footnote stream.
3. Import it in indesign and using script convert it to autofootnote.
Shaji

How to handle data that got from SAP by Webservice?

Hi, Gurus.
I am working on IFbA with ABAP and Adobe LiveCycle Designer.
I've developed a function module in R/3 system and created webservice, connected the WSDL address to the form. The problem is how can i handle data that got from SAP by Webservice?
It's Ok if i bind the dataconnection node to the form element, but how can i handle data without binding to the form element? I mean that how can i use the data retrieved from Webserivce in the Javascript, please give me some sample code or script method.
Thanks.

Hi Yang,
If you are using Web Service, then the binding will be done automatically.
It can't grow automatically, what else should i do to achieve this?
1.Select the table(make sure you are not selecting subform) in Hierarchy view
2. Under table select the Row which is having the required fileds for data
3. In the Binding of that row, check the checkbox "Repeat Row for each item data" and under that check the Min Count which will set the default row **** to 1
Regards,
Sachin

How to enable change password feature in SAP Netweaver Portal 7?

Hi experts,
I would like to provide a change password link just beside the logout link after user had successfully logged in to Sap Netweaver portal. When user clicks that link, a change password screen sill appear to allow user to change his/her password.
Question:
1) How do i create a link in portal header just beside the logout link?
2) Is there any default change password page for Sap Netweaver Portal that I can use for this purpose?
Thanks,
Kenneth

Hi,
To get the change password link beside logout, get the masthead PAR file from portal, import into your NWDS, make the changes in the JSP and upload PAR file back to portal. Search with keyword "Masthead customization" in SDN. You will get many documents to achieve.
SAP has password change functionality available. Chekc the link below for details.
Re: Change Password Functionality
Regards,
Yoga

How to handle E1 Purchases & Sales in SAP B1

Hi all,
How to handle E1 Purchases and Sales in SAP Business One.
Kindly advise, if possible provide me the documents.
Regards,
Vikram

Hi Samir,
I am using 2007B PL - 08
My customer place the Purchase Order to X Supplier for Excisable Items.
X supplier place the order to Y.
Y will directly deliver the goods to my customer with the reference of supplier's X details and also Y will mention the Unit Price and Excise duty paid by him.
Based on the material delivered by Y,X supplier's send's the Invoice to my customer.
but in this scenario my customer is eligible to claim the excise duties as per Y supplier.
How to handle the above scenario.
Kindly advise.
Reagdrs,
Vikram

How can I change Time data with List Entry Screen ?

Hi expert.
I transfer Time Data (Infotype 2003) via CAT6.
When I go to transaction PA61 and click List Entry icon.
Record is display and cannot change data.
If I wanna change data.I must to click Choose Icon one by one record.
How can I change data with List Entry Screen?
ps. If record create via PA61. I can change data with List Entry Screen.
I can't change with record that create via CAT6.
Best Regards.

have u tried to change your time entry through CAT2 tcode, ithink if u have created profile for time entry then it should allow you to change and you can use esc otherwise, its generally the standard profile given by SAP. but is 4 one user
hope this helps
guds

How to handle change of relation with SAP

Similar Messages

Maybe you are looking for