How to handle defect items in sap sd..

Hi Friends,
How to handle defect items in sap sd..
My requirement is some of the XYZ materials are damaged 10%.Some more materials(Material number is XYZ) are damaged to 20%.When sales order is created with these defect items,the system should pickup the defect items only?One more thing is for 10% damaged items,one price is given.For 20% damaged items,one more price is given and so on.How this will be configured in sap sd.
We hav an idea that making these type of defects as scrap.Then create one more material number as AXYZ(Defects of XYZ) and receipt without po.We can use the defects in sales order and soon.But how pricing will be set for different levels of damages?
Any ideas,documents and settings required for this scenario and share any ideas
Thanks in advace....VM

Hi All,
Thank you very much for your replies and sharing your valuable information
Just I am giving all the meeting points and those are
They donu2019t want to convert into scrap.
One more point is that if materials are in batches then???
When we create sales order that damaged one only should be picked by the system.
Manual entering the price need to be stopped
Without maintaining separate material for the damaged, any possibilities?
We discussed abt Split valuation point .Is it suitable to this? then how?
How to handle this we are thinking.
Both Rithvikau2019s point and Jigneshu2019s point need to be considered, actually this is main issue. There are more chances of malpractices/confusion to the user as mentioned by Rithvika. Here one more constraint is more material codes required for 10%, 20%, 30%........90% damaged one for one material as said by Jignesh
Actually I mentioned only as example 10% and 20% but have many.
Any ideas how to proceed...
Thanks and Regardsu2026VM
Edited by: vm on Apr 13, 2009 4:45 PM

Similar Messages

How to handle sub subcontracting in SAP B1 ?

Dear all,
How to handle sub subcontracting in SAP B1 ?
Let me explain in detail,
My client doing sub contracting work for parent company,raw material is actually received from parent company
thru 57F4 challan,raw material sent for further processes in my client company and later converted material
is sent to a sub contractor for finishing thru 57F4 challan,after finishing material is recieved by client company,
send it once again to parent company.In this process raw material is received as X and send it to parent company as Y.
My question is, How to handle sub sub contracting items stock ?
Expecting u all valuable ideas / suggestions.
Jeyakanthan

hai!
Will u raise any bill for ths. i mean ur child cmpny to parent cmpny.?
1. Receive the items to your child cmpny through GRPO or GR
2. Use Production Order cycle to do FG.
3. Define BOM or use Special Production
4. Transfer to the Sub- contarct warehouse through Inv.Transfer.
5. once after processing over, book inv.Transfer to you good down.
6. Use Goods Return or GR to issue the item out to parent company.
hope it gvs u a starting..

Please tell me how to handle list item in this concern

please tell me how to handle list item in this concern
My problem is:
i have a category table with column categoryname(varchar type)
I want to display the records of categoryname in a drop down list (i.e., list item )
So ..please tell me how to do it
Thanks in advance..

This code is just a sample from the Help documentation. It won't work until you modify it for your form.
Why do you have "steps" in your code? You are suppose to do what the steps tell you. You don't place the steps in your code. The steps must be removed from your code.
Step 1 code goes in a program unit, not in a trigger.
Step 2 and 3 code usually goes in a trigger.
You will have to replace the names of the items and record group with your own names as you have defined them in your form.
step 1: create a procedure in your application
procedure load_list(itm in VARCHAR2, rg in VARCHAR2) is
group_id RecordGroup := Find_Group(rg);
list_id Item := Find_Item(itm);
Begin
if Populate_Group(group_id)<>0 then
Message('Unable to populate record group');
Raise Form_Trigger_Failure;
end if;
Clear_List(list_id);
Populate_list(list_id, group_id);
end;
step 2: create a record group named rg_cat and assign Record Group Query to something like "select categoryname from category"
step 3: call this procedure as
load_list('categoryname','rg_cat');

How to handle Big FIles in SAP PI Sender file adapter

Hi all ,
I have developed a interface , where it is File to Proxy, it is fine when i do with small and normal files
The structure contain one Header unbounded detail and one Trailer, how to handle when the file size is more than 40 MB
Thanking you
Sridhar

Hi Sridhar Gautham,
We can set a limit on the request body message length that can be accepted by the HTTP Provider Service on the Java dispatcher. The system controls this limit by inspecting the Content-Length header of the request or monitoring the chunked request body (in case chunked encoding is applied to the message). If the value of the Content-Length header exceeds the maximum request body length, then the HTTP Provider Service will reject the request with a 413 u201CRequest Entity Too Largeu201D error response. You can limit the length of the request body using the tting MaxRequestContentLength property of the HTTP Provider Service running on the Java dispatcher. By default, the maximum permitted value is 131072 KB (or 128MB).You can configure the MaxRequestContentLength property using the Visual Administrator tool. Proceed as follows:
       1.      Go to the Properties tab of the HTTP Provider Service running on the dispatcher.
       2.      Choose MaxRequestContentLength property and enter a value in the Value field. The length is specified in KB.
       3.      Choose Update to add it to the list of properties.
       4.      To apply these changes, choose (Save Properties).
The value of the parameter MaxRequestContentLength has to be set to a high value.
The Visual administartor tool may be accessed using this link
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/40a08db9-59b6-2c10-5e8f-a4b2a9aaa3d2?quicklink=index&overridelayout=true
In short ICM parameters to reset values for this case are
icm/HTTP/max_request_size_KB
icm/server_port_ TIMEOUT
rdisp/max_wprun_time
zttp/max_memreq_MB
Please look into this thread to know more about ICM parameters
http://help.sap.com/saphelp_nw04/helpdata/en/61/f5183a3bef2669e10000000a114084/frameset.htm
Second solution is that you must split the source file, so that each file is less than 5MB in size, then PI would not cause problem for file size between 1MB-5MB. you can insert header and trailer for individual smaller file obtained after split. All this can be done using scripts or conventional programing provided individual records within file are independent of each other. Finally you have to rename each new file created and put them in PI folder in sequential manner. All this can be achieved by simple shell script/batch file, a C code or java code. If you are going for a C or Java code you need a script to call them from PI communication channel parameter "run operating system command before message processing".
regards
Anupam

How to track sample items in SAP

Hi experts,
we need some advice on how toi nput and track our sample items in SAP. we would like to keep track of the quantity of sample items that we purchase, but we do not want it included in our inventory. the sample items are actually used in trade shows and are considered a marketing expense.
please advise.
thank you.
jane

Hi Jane.......
For this you have to create Non Inventory Item and want to set teh GL account fro expense as Expense Account. So, when you take this sample Item in Transactions your purpose of Expense Account as well as no Inventory will be solved and you can get the proper track through Marketing Item Type docs..............
Regards,
Rahul

How to handle special character in SAP CRM

Hi all,
I am facing a problem on SAP CRM Web UI - Contact Creation - When a special character is inserted on address fields of Business
Partner (e.g. ` ~ ^ etc.), the interface does not understand this character and changes it to a TRIANGLE on pressing enter key.
Kindly guide as how to handle it or something is missing in terms of (note or patch).
I am running on SAP CRM 7.0
Thanks,
Pradeep Singh Dhadwal

Hi Pradeep.
At the end of the day, a character is stored as a byte sequence on disk, and a code page defines the mapping between the byte sequence and any given character.The code page determines what character you can see and enter, therefore different code pages map different characters to the same byte sequence.
I suggest you to first check if your system is a Unicode system by checking the System menu->Status option->Unicode system field. I'll assume it is.
Then, please run report RSCP0018 (optionally also RSCPINST and then select Current NLS config pushbutton).
These reports will show you the actual configuration of languages and code pages of your Application Server. Please check that the correct languages and code pages are configured. If you need to know more about code pages configuration, please check Note 42305, which explains pretty well the whole process.
Kind regards, and good luck.
Federico

Service? How to handle this process in SAP?

Hi,
Ihave a problem
The customer provide us his own material,
In production process we add to it our own component. Than we have to pass it to our magazine with the same customer name but higher price.
Is it a service? How to handle in SAP.
Thanks in advance.
Artur

This is not service but internal subcontracting scenario, You can go through below link for understanding it better,
[Internal Subcontracting |http://forums.sdn.sap.com/thread.jspa?threadID=571772&messageID=4190422#4190422]

How to handle ovedue items in Credit Mgt OVA8

My requirement was that to handle Overdue items in Credit Maanagement in the TCode OVA8
Regards
Madhav

hi Madhav:
you can first mark the [tab] check field "static" as selected and second:"reaction" choose D :like
B+value by which the credit limit has been exceeded.
By setting this when over quantities the order cannot be saved.
If there existing over date checking you can mark the NextReview date and also chose D in the reaction
field.
Regards
Yu Chaoqun
Jan,07,2008

Need your input on how to handle "Practice" items in Captivate module

HI, I currently have short lessons in Captivate. I am using the TOC. The lessons have an introduction, content, conclusion and practice. How have you been handling the practice items?
I'd like users to take the practice. then I want them to go back to the practice to retake it. but i also want to track the results. so far i have set captivate to track results for the lms. i also set the questions to 2 tries. i have also allowed captivate to go backward in the test. the problem is that after the user answers the practice quetions once, and they go back, they see their answers and cannot change them. in the toc, they can't move back and forth in the practice section. i don't know what design strategy to use. a practice a just a practice and not an assessment where they can't change their answers. however, i'd like the lms to track their practice.
Any ideas?

I'm growing increasingly frustrated with the Captivate Quiz feature. I wish I did not have to use it. I want the quiz to act as a "practice" section where users can navigate freeley between questions and to interactive screens within the Captivate module. Currently, i can't do that. once you take the "practice" and you go back to "other parts of the module" we can't get back to the practice. THERE MUST BE A WAY TO FIX THIS!!!!!!!!!!!!!!!!!!!!

How to handle line item for posting a document

Hello,
I am using a function module to post a document, so far I have hard coded all the values in the test program. I am passing two internal tables to the function module, one which has header data and the other which has line item data. So far I have written the following code to get the line item details:
it_bseg-BUKRS = '001'.
it_bseg-GJAHR = u20182010u2019.
it_bseg-BUZEI = '001'.
it_bseg-BSCHL = '31'.
it_bseg-WRBTR = '900'.
it_bseg-PSWSl = 'USD'.
it_bseg-SAKNR = u20180000123456u2019.
it_bseg-HKONT = u20180000123456u2019.
it_bseg-LIFNR = u2018001234567u2019.
append it_bseg to lt_temp_bseg.
clear it_bseg.
it_bseg-BUKRS = '001'.
it_bseg-GJAHR = '2010'.
it_bseg-BUZEI = '002'.
it_bseg-BSCHL = '40'.
it_bseg-WRBTR = '900''.
it_bseg-PSWSL = 'USD'.
it_bseg-KOSTL = '1111871234'.
it_bseg-XKRES = 'X'.
it_bseg-HKONT = '0000564738'.
it_bseg-FISTL = '1234556000'.
it_bseg-GEBER = '0000001'.
it_bseg-fkber = '0'.
append it_bseg to lt_temp_bseg.
clear it_bseg.
Now I want to get rid of the way I am handling the line item and want to handle it based on what user enters. For example right now only line item is being considered but if user enters two line items then what should be the approach.
Thank you,
Rajeev Gupta

Any Suggestion.

How to select an item in sap.ui.table.Table without using index?

Hi there,
I want to select an item of a sap.ui.table.Table by finding the right item and selecting it.
Take the example at this SDK page:
SAPUI5 SDK - Demo Kit
You have first name and last name. I want to select "Mo Lester". While there is a function called setSelectedIndex, there is no function for setSelectedItem.
I have to search the items of the table for a required entry and select it (like clicking on it).
Is there a way to do this (programatically)?
I'm using aggregation binding with a JSON model.
Regards
Tobias

Hi Tobias,
What you could do is first find the JSON object (i.e., the table row) in your table model, and use its index in the model to set the selected index:
var matches = $.grep(array, function() {
    return(this.firstName === "John" && this.lastName === "Doe");
if (matches.length) {
    var index = yourTable.getModel().getData().indexOf(matches[0]); //first match
    yourTable.setSelectedIndex(index);

How to handle "bulk orders" in SAP AFS ?

Hi experts,
do some of you know how to manage in SAP AFS the so-called bulk orders also known as "promises to buy" ?
I heard about the chance to use a SD contract: if this is the case which type of contract I am supposed to use ? How this contract is treated by the ARUN ? Is it MRP relevant ?
Thanks in advance.
Karlinga.

Don't believe this is possible without a manual process linked to it.
The only solution I see for now is that you first only release the TR that need to go to your follow-up system, import them, then perform the manual actions and then release the subsequent TRs, etc...
Same issue is popping-up when using XI Transports, as each TR has a Change List that needs to be activated. If two TRs within the same maintenance cycle contain the same object, the second TR will fail because the change list for that object is not yet activated. A manual process can solve the issue. At our project, we introduced a new user status for this.
Best regards,
Roel

How to handle deemed imports in SAP..

Hi all,
My client has the requirement of deemed imports.
In this case client orders to a third party who procures the materials, does the customs clearing, pays the excise ...
The third party can transfer the excise values to client.
eg: The third party says material price is 90 INR
It includes the excise values also.
If we order 100 pcs then total amt to third party is 90*100=9000
It includes the excise values also.
So we first calculate using excel the correct material price
In eg: it is 77.72 INR *100 = 7772 INR
We enter the CVD = 10%=777.2
ECS ON CVD = 2 % = 15.544
SECS ON CVD = 1 % = 7.772
AED = 5 % = 428.6258
Thus sum become 9000 inr
Then CST/VAT is to be calculated on this amount
Please check what i am goin to plan is correct\
1. PO with as said conditions makin the material price 77.72 * 100
Conditions amounts entered in pricing procedure
tax code (for CST/\VAT)
Here the problem arises
since tax is calculated on the base amo;unt , tax get calculated on the 77.72100 where it shud have actually been 90100
2. migo with conditions in pricing procedure
3. miro
here i give tax codes to each line in miro
ie; for material, CVD ,ECSon CVD, SECS on CVD, AED so that the tax is calculated on the correct amount.
Is this correct or not??
sapmmlearner
Client can take credit of this
Edited by: sapmmlearner on Feb 14, 2011 3:07 PM

Hi Shri,
Regarding your query,SAP does not have the functionality of Managing PF Trust, as the management of these trust are governed by Govt authorities,this remains outside of SAP.
For considering the PF trust as requirement
1-You can have an Interface to flow data from SAP to other system which the PF trust has and vice versa if needed.
2-you can create a company code for the same and pass on data to the trust,however based on your requirement you will have to discuss this alongwith your FI/CO Consultant,properly map the requirement and then only go ahead with the same to get the desired output as required.
For creating this different trust and assigning employees to that refer to the configuration given to you.
Salil

SAP Idocs -How to handle response from target system

Hi,
I am working on a scenario in which I will send Idocs asynchronously from SAP thro a SOAP adapter to a webservice deployed on the target system.
After the Idoc data is posted in the target system,the target system will send the acknowledgement for the receipt(basically response message).How to handle this scenario?
SAP Idoc( outbound asynchronous)---> SAP XI3.0(soap adapter) ---> Target system(inbound synchronous)
Do I need to go for BPM to handle this situation?
Is there any alterantive to BPM.
If any of the forum members who have worked on the similar scenario could help me in finding a better solution,I will be thankful to them.
Thanks,
Leo

Hi Udo,
Thanks for the info.My scenario is like this.
SAP R/3 Idoc -> SAP XI 3.0 <-> Webservice in the target system.
The webservice in the target system will receive the Idoc as a request messsage and send a response message synchronously.
Since Idoc is sent asynchronously( I believe Idocs sent from SAP are always asynchronous),there is no Proxy waiting in SAP R/3 to receive the response message from the target system.
If I go for BPM for the above scenario,will the BPM steps look like the following.
1)Receive Idoc from SAP.
2)Send Idoc sysnchronously to webservice
3)Receive the response from the webservice synchronously.
4.Post the response message to a proxy which can handle it further in SAP R/3.
Please note that my knowledge in BPM is limited and correct me if I am wrong.
Thanks in advance
S.Banukumar

Need help on how to handle zip & text/csv as a resposne payload from Concur RestWebservice

Hi All,
We are getting zip(if there are multiple files) and test/csv(single file) as a response payload from the concur rest API and need your help on how to handle in NWBPM and SAP PO.
Zip response coming in response looks like below -
PKÀ˜F7extract_attendee_detail_p0600908soav_20150424022159.txts� rt©1204Õ50Ñ52©1¨áåPKzà@ÆPKÀ˜F2extract_CES_SAE_v3_p0600908soav_20150424022148.txts� rt©1204Õ50Ñ52©1¨©1ãåPKåëŠŸPKÀ˜Fzà
Text/csv response looks like below -
Extract|2015-24-40|20|0
Need you help on how to handle the zip content response.
Also need help on how to handle when text/csv response comes and when zip response comes.
As per the scenario, there are 4 calls to be made and we are using NWBPM and in the last call the actual respons (text/csv or zip) will come.
Please provide your inputs.
Thanks
Narayanareddy B

Hi Aaron,
Thanks for your reply.
I tried with Payload zip bean and the java mapping as mentioned in the response mapping of OM.
Payload zip bean - Zip zip.mode unzip
I am getting the error below in the receiver rest channel -
"Transmitting the message using connection JPR failed, due to: com.sap.aii.af.lib.mp.module.ModuleException: Zip: error occured during processing: java.util.zip.ZipException: invalid stored block lengths"
Java Mapping - used the java mapping in the response of Operation mapping
Here also i am seeing the same error in the channel log as it is synchronous step and the message got cancelled.
"Transmitting the message using connection JPR failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Error encountered while executing mapping: com.sap.aii.af.service.mapping.MappingException: Mapping failed in runtimeApplication mapping program com/equalize/xpi/esr/mapping/java/UnzipAndAttach throws a stream transformation exception: Exception: invalid stored block lengths"
The below is the response i am seeing and is it proper zip response payload(any encryption) , kindly advise.
PKâE�F:ws_extract_attendee_detail_p0600908soav_20150424083413.txts� rt©1204Õ50Ñ52©1¨áåPKzà@ÆPKâE�F5ws_extract_CES_SAE_v3_p0600908soav_20150424084014.txtíTß��@~oÒÿ�÷Fº»ìV}ëòCÏz Qljß8ÜöL�`N�ùão8�Ò«�´M�Ü@�awvçûfgÇùâÏ¤å#Ttï0Ø�B�²·olÇ�£[4Ï](L�]«�ÑbÀôÁÒc�0ÀÏdAªÙÐ¢¨Ìû�Êv¡�b¤eJA%��=Þ7Í>PÚ=í2��7ò[�¼¡=q/°¶�*ø)
K|<`BgÉÔºÜWs[§J�&Ñ:Ìá:´�ç«�RÐv�ÚÅAD'\�ÁtR²*DP3gî:B@JëhU�Ò'¬�ùQ\�È\D{·O×±JS\ï�-ò�¸�Þ²êó�{Å¡2®â,MmÉù XAzßüBn&®Sl-§�l¶A�×ú½³ÙFI®0¿©Ú¯¤�oT�iV²RÀJ��¼«`õ»�í Ûéwa#�àpY�««óq)U°JaøÁA�ûì>Ù³üHåÒe¾�7��Ð/§£u°Nzã÷ç4×·èãþ�¾}õ0ÙµYÄ�+J��eX\�E±ïsR%®yÜÕðsªáÚ$qÚÎÇ�Û$^%1¸AF*ý¶VÑêxÏZÏ¢U½T~Ñ®ØkW5ç×®õ¿w5¬zò:oN»�ô��íø÷úÛÙ=¬å�[ôÚ�þmczPKhÏ��i PKâE�Fzà@Æ:ws_extract_attendee_detail_p0600908soav_20150424083413.txtPKâE�FhÏ��i 5�ws_extract_CES_SAE_v3_p0600908soav_20150424084014.txtPKËö
Thanks
Narayanareddy B

How to handle defect items in sap sd..

Similar Messages

Maybe you are looking for