How to handle duplicate messages in J2SE File scenario

Hi,
Is there any way to handle processing of duplicate messages in J2SE File adapter scenario?
Here is the scenario ,
Steps :
1. Engine picks up a message and checks the size of it.
2. Before reaching the checking interval , the adapter(file) was terminated unfortunately.
3. J2SE engine was restarted.
4. Previous file was again picked up and sent as the first time with one msgID.
5. After sometime, same file was picked up with a new msgID
6. System gets only ONE configrmation that file has been successfully transfered.
So we find two messages containing the same file.
I have checked in J2SE doc, there is a parameter called "db.exactlyOnceErrorInPendingState" which is related to DB.
Is there any similar parameter to handle the duplicate messages in FIle Adapter scenarios of J2SE Engine.
Please help me in this regard as it seems to be a new thing in J2SE AE.
Regards,
Soorya.

Hi swarup,
But using OS command how can we rename /archive that file?
Module means any Custom Module or wat?
Following are the channel configurations used in File To File scenario.
File Sender :
version=30
mode=XMB2FILE
XI.httpPort=58201
XI.httpService=/test
XI.ReceiverAdapterForService=test_rcv
file.numberOfMessageTypes=1
XI.Interface=MI_test_out
XI.InterfaceNamespace=http://nestle.com/test
file.type=BIN
file.targetDir=/test_inb
file.targetFilename=unusedbutreq
file.writeMode=fromHeader.ext
file.createDir=0
file.nestleName=initial
file.writeMode=fromHeader.ext
file.nestleEXT=test
file.nestleFileOverwrite=False
File Receiver :
version=30
mode=FILE2XMB
XI.TargetURL=http://localhost:58201/test
XI.NestleTargetURL=http://localhost:58201/test
file.type=BIN
file.checkFileModificationInterval=300000
file.pollInterval=300
file.processingMode=archiveWithTimestamp
file.archiveDir=/test_out/arc
XI.QualityOfService=EO
file.numberOfMessageTypes=1
file.messageAttributes=name
XI.SenderService=test_snd
XI.Interface=MI_test_out
XI.InterfaceNamespace=http://nestle.com/test
XI.ReceiverService=test_rcv
file.nestleBadMsgDir=/test_out/bad
file.sourceDir=/test_out
file.sourceFilename=.
Do the needful help asap.
Regards,
Prakash.

Similar Messages

How to handle 2 or more .jar files with an applet

Hey out there
I have created an ftpClient application that uses "jakarta ftpClient". It works fine as an JFrame application � But when I converted the Application into an JApplet I get the following Exception:
java.lang.NoClassDefFoundError: org/apache/commons/net/ftp/FTPClient
I have bundled the main application into a .jar file (Application,jar). But I don't know how to handle the 2 jakarta .jar files with my JApplet??
I Tried to append the 2 jakarta .jar files to the Application,jar with the following code:
jar cvf Application.jar 1.class 2.class�. commons-net-1.4.1.jar jakarta-oro-2.0.8.jar
But with the same result / Exception (I have signed the Jar file!)
Can anyone help me

Hi i have a question with your application can you down- or upload more files at the same time? Because i'm having problems with my ftp application.
Here is the link with my problem maybe you can help me. I will be very pleased when you can help me.
http://forum.java.sun.com/thread.jspa?threadID=5162042&tstart=0
Thx
Satanduvel

How to save video messages to a file on Mac?

How to save video messages to a file on Mac? Please, help. Thank you.Claire

Claire, I use a Mac w/ the latest copy of Skype and it IS possible to first play the file and then download it. Steps are available for it but it involves some technical wizardry that can be above some muggles. Then I found a post where some some VERY bright person made a small downloaded program for the Mac which once the video message has been played recently, you can run this program and download the file for safe keeping ( ALWAYS BACKUP or store it in the cloud for safety ) Kudos are deserved to user alvarop for this! http://community.skype.com/t5/Mac/Video-Message-Exporter-App/m-p/2351609 It worked for me to download a video message that I recently played back. Let me know if you need any assistance getting it downloaded you can PM me on here and I'll be happy to help with a screenshare. Best Regards,-Shawn G

How to test the RFC to Flat File scenario

Hi,
How to test the RFC to Flat File scenario
regards,
kiran

Hi,
After running the RFC it's going Dump.
this is the error message i got.
"Error analysis
An error occurred when executing a Remote Function Call.
"CPI-C error CM_RESOURCE_FAILURE_NO_RETRY"
Status of connection.... "CODE=CM_RESOURCE_FAILURE_NO_RETRY -1 -1 SAPCODE=666
CONV="
Internal error code.... "RFC_IO5"
There is an error in the communication system. To clarify
and resolve the error, contact your system administrator.                     "

How to handle different message types of EDIFACT in single input file.

Hi All,
Currently we have a requirement like we will be receiving the input with different messages in the same input file (eg: ORDERS and ORDRSP in the same file).
We have configured both the message types in the document definitions. One more thing is the versions of the messages are different.
When we pass the input we are getting the error.
The input looks like below,
UNB
UNG
UNH*ORDERS
UNT
UNE
UNG
UNH*ORDRSP
UNT
UNE
UNZ
Please assist us to overcome the error.
Thanks,
Ravindra.

Hi Prasanna,
Thanks for your reply.
I have created the agreements for both the messages still i'm getting the below error,
B2B-50037
B2B inbound message processing error
If i give the input as separate messages (i mean 2 input files). Its working fine.
Also let me know is there any configuration settings to handle multiple messages in a single input file.
Thanks,
Ravindra.

How to handle rejected messages in file adapter

Hi....! every one.........
in file adapter read operation it will pick the files even the file contains unstructure message but that file wont be processed.
where the rejected message goes.
i have requirement like that rejected message i have to store in another file
please provide me answer..........

Hi,
You can add the parameter 'PhysicalErrorArchiveDirectory' in the JCA file (of the File Adapter).
Put there the required directory where you want the rejected file to be sent.
You can add this property in 2 ways:
1. In your JDeveloper open the JCA file and add: <property name="PhysicalErrorArchiveDirectory" value="/../.."/>
2. In EM, right click the composite->Service/Reference Properties->Choose your file->On the Properties tab press Add-> Choose 'PhysicalErrorArchiveDirectory' and put the directory-> press Apply.
Arik

How to avoid duplicate record in a file to file

Hi Guys,
          Could you please provide a soultion
          in order to avoid duplicate entries in a flat file based on key field.
          i request in terms of standard functions
         either at message mappingf level or by configuring the file adapter.
warm regards
mahesh.

hi mahesh,
write module processor for checking the duplicate record in file adapter
or
With a JAVA/ABAP mapping u can eliminate the duplicate records
and check this links
Re: How to Handle this "Duplicate Records"
Duplicate records
Ignoring Duplicate Records--urgent
Re: Duplicate records frequently occurred
Re: Reg ODS JUNK DATA
http://help.sap.com/saphelp_nw2004s/helpdata/en/d0/538f3b294a7f2de10000000a11402f/frameset.htm
regards
srinivas

How to get the filename from J2SE File adapter

In our project scenario , we are using J2EE and J2SE engine both .J2EE for mapping and J2SE for Deliveying the message .
In one senario, routing will be based on the filename .
J2SE Sender File adapter --- XI Adapter --- XI pipe line
So the File reaching to XI pipelane via J2SE File adapter--> XI adapter.
When we are using the dynamic configurator in the XI to get the filename
we are not able to get the file name becasue it is coming to XI via
XI adapter.
How to get the filename ????Hope I am clear about the problem.

hi,
try this
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
//obtengo la Key del FileName
DynamicConfigurationKey keyF = DynamicConfigurationKey.getName();
http://help.sap.com/javadocs/NW04/current/pi/com/sap/aii/mapping/api/DynamicConfigurationKey.html
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/70c89607-e4d9-2910-7280-f6746e964516
/people/mohammed.zabiulla/blog/2008/03/26/have-you-ever-tried-to-determine-mail-cc-dynamically
Hope it helps
Thanks
Rodrigo
Edited by: Rodrigo Pertierra on Apr 11, 2008 9:31 AM

How to handle HTTP Message Format

Hi All,
i have the interface like XML File(Supplier)--XI--HTTP Message Post(SRM Server)
How to handle this case and how to handle the HTTP Message formats, what Adapters and all i need to use here
Regards
Vamsi

check susma's reply
File to HTTP
File to HTTP
/people/kausik.medavarapu/blog/2005/12/29/csv-file-lookup-with-http-request-and-response-in-xi

How To Handle Error Message In TCD Recording?

Hi All,
I tried recording a transaction (my own transaction) by not enterring value in an obligatory field. the error message came. but when i executed the script, it showed an error. but actualy, the error message was expected right? how to handle this situation? i tried with tcd and sapgui recording. both gave almot the same result.
i am including the script which i have written.
MESSAGE ( MSG_1 ).
*TCD ( ZCUST , ZCUST_1 , ECC ).
SAPGUI ( SAP_1 , ECC ).
ENDMESSAGE ( E_MSG_1 ).
v_mno = &tfill.
v_msg = E_MSG_1[v_mno]-msgtext.
v_mtp = E_MSG_1[v_mno]-msgtyp.
If Msg Type is E *** **** It Has To Be E ****
IF ( v_mtp = 'E' and v_msg = 'Account no AC02 does not exist EXIT = X').
logtext(0,'Passed').
ELSE.
log(v_mtp).
log(v_msg).
logtext(1,'Failed').
ENDIF.
End Of The Condition For Message Type E ******

I have recording messages using the TCD command.
My script (very simple):
MESSAGE ( MSG_2 ).
TCD ( ME21 , ME21_1 , R3 ).
ENDMESSAGE ( E_MSG_2 ).
In the MESSAGE command interface, I defined rules to allow several kind of messages.
Execution: 3 mesages found:
      * transform PR into PO
       MESSAGE     MSG_2 [1,009 sec]
         RULES MSG_2 = XML-DATA-01
        Message MODE EXIT TYPE ID    NR
        [1]      'A'         'I'   06    456
        [2]      'A'         'W'   'ME' 080
        [3]      'A'         'E'   'ZE' 029
         TCD    ME21                 [0,545 sec N] Target sys R3 -> ZDA010A219
        S06017 Standard PO created under the number 8201075606
           Tgt System Z_A219->R3->ZDA010A219 (ZDA 010 ... HP-UX ORACLE)
           CALL TRANSACTION ME21 ME21_1 XML-DATA-01
           03 MESSAGES FROM ME21 ME21_1 XML-DATA-01
           I 06 456 Release effected with release code 00001
           W ME 080 Delivery date: next workday is 02.05.2007
           S 06 017 Standard PO created under the number 8201075606
       ENDMESSAGE E_MSG_2 (&TFILL = 0)
As you can see, 3 messages are found but the &TFILL variable is still 0.
I guess (but cannot test yet) I would manage to record those messages using SAPGUI command.
Is there anything wrong with my script?
My SAP_BASIS component is in version 620. I'm not using the ultimate version of eCATT (no WEBDYNPRO command, etc.). Could it be an explanation?
Thank you in advance,
Olivier

How to handle error message during PAI?

Hi Experts,
Need help here.
In my dialog screen, I have a field which is typed 'QUAN'.
In entering different format , e.g. with non numeric value or a negative value, an error message appear and it does not process the MODULES inside the chain or FIELD MODULE ON REQUEST.
Does anyone knows how to handle this kind of error. I need to display into a separate screen the errors I encountered coz I'm creating a new RF transaction.
Points will be rewarded.
Thanks in advance.

Hai
in your case(RF case) it is other way...
yes you can use
field x_currency module check_currency.
in module check_currency.
you have to display errors in another screen say 200.
in that there will be 4 fields, all are display only fields.
X_MESSAGE-MSGV1 of type sy-msgv1
X_MESSAGE-MSGV2 of type sy-msgv2
X_MESSAGE-MSGV3 of type sy-msgv3
X_MESSAGE-MSGV4 of type sy-msgv4
you populate the messages with these fields and then display it in the screen.
method check_currency.
*--do all your checks here....
       if error
         clear x_message.
        x_message-msgv1 = 'Enter Valid Employee Number'(004).
        leave to screen 0200.
      endif.
    endif.
ENDMODULE.                 " VALIDATE_Currency
in screen 200 PBO you need to format the message
using the below logic.
       Method for formatting the message
method message_format.
    data : lt_text type table of tline,         "text table
           lx_text type tline.                  "work area
    refresh lt_text.
    clear lx_text.
    concatenate x_message-msgv1 x_message-msgv2 into lx_text-tdline
      separated by space.
    append lx_text to lt_text.
    clear lx_text.
    concatenate x_message-msgv3 x_message-msgv4 into lx_text-tdline
      separated by space.
    append lx_text to lt_text.
*- formatting the message
    call function 'FORMAT_TEXTLINES'
      exporting
        formatwidth = 20
      tables
        lines       = lt_text
      exceptions
        bound_error = 1
        others      = 2.
    clear: x_message.
*- transfer the message data to screen fields
    loop at lt_text into lx_text.
      if sy-tabix = 1.
        x_message-msgv1 = lx_text-tdline.
      elseif sy-tabix = 2.
        x_message-msgv2 = lx_text-tdline.
      elseif sy-tabix = 3.
        x_message-msgv3 = lx_text-tdline.
      elseif sy-tabix = 4.
        x_message-msgv4 = lx_text-tdline.
      else.
        exit.
      endif.
    endloop.
endmethod.                    "message_format
Regards
Vijay

How to handle parked message in BPM?

Hi,
I have a scenario that buyer as R3 send PO(same PO number) change idoc multiple times into bpm without receiving PO change confirmation(from seller, non R3) yet, I have a loop in bpm to handle this case, the loop checks the condition whether confirmation matches change request, if not, potential loop repeats. However, if I have multiple change request(same PO number) sent from R3 to BPM, my BPM waiting for my order confirmation, then if the first order confirmation comes into BPM matches with the first change request, then I exit the loop, but I still have several change requests parked at processXXXXX yet to be processed, does anybody came into similar situations? Any good suggestions or examples?
Thanks,
Maggie

Hi there,
I need to correlate ChangeConfirmation to ChangeRequest with PO number, this is for the purpose of ChangeRequest waiting for Confirmation for the same PO number. However, I don't know how to handle multiple changes come into BPM without confirmation yet, my current design is that I immediately enter a loop in BPM, with condition confirmation Info doese not match change info, thus the change request is bundled with bpm process, once the porcess is finished(response match change request), the queue of my other change requests(the parked ones) now got deleted, does anybody have any good suggestions in handling multiple change request(for same PO number) in bpm? Is there a way I can force bpm to handle one request one response, throw some error message if multiple changes comes together without response yet? Anybody had encountered similar issues?
Thanks,
Magge

How to handle error messages in BDC background mode

Hi experts,
I got one problem in BDC, We are uploading data throgh BDC program,that program is calling Standard Batch Input programs,
Now we got one requirement, i.e., In some special cases we have to send one message as a error message.I handled this in foreground but, how to handle this in background.

Hi,
if session is being used
automatically the log will begenereated in the sm35 transaction
but if call transaction is used
put all the error messages in the applicationserver using
open data set
and after the exectionof the program in the background
you have to run another progam which reads the data stroed inthe application server
that also with open data set only...
thanks & regards,
Venkatesh

How to handle xml message in proxy inbound processing?

Hi Experts,
I have a scenario that is SOAP Client====>XI===>ECC.
But i don't need to use the XI mapping,i skip mapping
in XI and use the generated proxy inbound processing.
Here is a message structure as below.
<commodityList>
■<commodity>
■■<detailNo>303303</detailNo>
■■<makerName>sony</makerName>
■■<ChargeInfoList>
■■■<productId>aaaa</productId>
■■■<name>bbb</name>
■■</ChargeInfoList>
■</commodity>
</commodityList>
When i sent the message without field entry of <productId>
and <name> i got the response in soap client as below.
<commodityList>
■<commodity>
■■<detailNo>303303</detailNo>
■■<makerName>sony</makerName>
■</commodity>
</commodityList>
The field tag <ChargeInfoList> doesn't display.
But i want it to display as below.
<commodityList>
■<commodity>
■■<detailNo>303303</detailNo>
■■<makerName>sony</makerName>
■■<ChargeInfoList>
■</commodity>
</commodityList>
In case of field entry is empty,how to let the response
contains tag?
As i know ,there is a CONTROLLER in proxy .
But i don't know if it is relevant to this
case and i don't know how to handle it.
Brand

Hi Mrudula,
As far as i know there are no content conversion methodology for HTTPS as the recevier adapter.
Also you can read through these links to confirm the same:
http://help.sap.com/saphelp_nw04/helpdata/en/0d/5ab43b274a960de10000000a114084/content.htm
http://publib.boulder.ibm.com/infocenter/wbihelp/v6rxmx/index.jsp?topic=/com.ibm.wbia_adapters.doc/doc/sap_xi/sapximst30.htm
SAP NetWeaver - XML Communication Interface (CA-XML) [original link is broken]
Regards,
abhy
note: reward the helpful.

How to handle the messages.

Hi,
I am doing interactive report. In that how to handle the error meesages.
Regards
Srinu

HI
IF YOU WANT HANDLE THE ERROE MESSAGES
*& Report ZNNR_REPORT
REPORT ZNNR_REPORT NO STANDARD PAGE HEADING <b>MESSAGE-ID ZNNR</b> LINE-SIZE 100 LINE-COUNT 65(4).
******DATA DECLARATIONS**********
DATA : BEGIN OF IT_PLANT OCCURS 0,
        MATNR LIKE MARA-MATNR,
        WERKS LIKE MARC-WERKS,
        PSTAT LIKE MARC-PSTAT,
        EKGRP LIKE MARC-EKGRP,
       END OF IT_PLANT.
DATA : BEGIN OF IT_PONO OCCURS 0,
        EBELN LIKE EKKO-EBELN,
        EBELP LIKE EKPO-EBELP,
        MATNR LIKE EKPO-MATNR,
        WERKS LIKE EKPO-WERKS,
        LGORT LIKE EKPO-LGORT,
       END OF IT_PONO.
TABLES EKKO.
********END OF DATA DECLARATIONS*********
********SELECTION SCREEN DESIGN ***********
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
PARAMETER : P_WERKS LIKE MARC-WERKS MODIF ID S1.
SELECT-OPTIONS : S_EBELN FOR EKKO-EBELN NO INTERVALS MODIF ID S2.
SELECTION-SCREEN END OF BLOCK B1.
SELECTION-SCREEN BEGIN OF BLOCK B2 WITH FRAME TITLE TEXT-004.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS : R1 RADIOBUTTON GROUP G1 DEFAULT 'X'.
SELECTION-SCREEN COMMENT 5(20) TEXT-002 FOR FIELD R1.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS : R2 RADIOBUTTON GROUP G1.
SELECTION-SCREEN COMMENT 5(20) TEXT-003 FOR FIELD R2.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK B2.
******END OF SELECTION SCREEN DESIGN****************
*********INITIALIZATION OF SELECTION SCREEN ELEMENTS.*****
INITIALIZATION.
P_WERKS = '1000'.
S_EBELN-LOW = '4500016926'.
S_EBELN-OPTION = 'EQ'.
S_EBELN-SIGN = 'I'.
APPEND S_EBELN.
CLEAR S_EBELN.
************END OF INITIALIZATION***********************
***********SCREEN MODIFICATIONS*******************
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
    IF R1 EQ 'X' AND SCREEN-GROUP1 EQ 'S2'.
      SCREEN-INPUT = 0.
      MODIFY SCREEN.
    ENDIF.
    IF R2 EQ 'X' AND SCREEN-GROUP1 EQ 'S1'.
      SCREEN-INPUT = 0.
      MODIFY SCREEN.
    ENDIF.
ENDLOOP.
********END OF SCREEN MODIFICATIONS*****************
***************SCREEN VALIDATIONS *****************
at selection-screen.
SELECT SINGLE *
           FROM EKKO
           INTO EKKO
           WHERE EBELN IN S_EBELN.
IF SY-SUBRC <> 0.
    SET CURSOR FIELD 'S_EBELN-LOW'.
    <b>MESSAGE E999 WITH TEXT-005</b>.
ENDIF.
********end of screen validation*****************
START-OF-SELECTION.
*set pf-status '100'.
IF R1 EQ 'X'.
    SELECT MATNR
           WERKS
           PSTAT
           EKGRP
       FROM MARC
       INTO TABLE IT_PLANT
       WHERE WERKS = P_WERKS.
    LOOP AT IT_PLANT.
      WRITE : SY-VLINE , 2 IT_PLANT-MATNR COLOR COL_KEY,
             21 SY-VLINE , 22 IT_PLANT-WERKS COLOR COL_KEY,
             27 SY-VLINE ,28 IT_PLANT-PSTAT COLOR COL_NORMAL,
             43 SY-VLINE ,44 IT_PLANT-EKGRP COLOR COL_NORMAL.
    ENDLOOP.
ENDIF.
IF R2 EQ 'X'.
    SELECT EBELN EBELP MATNR WERKS LGORT
           FROM EKPO
           INTO TABLE IT_PONO
           WHERE EBELN IN S_EBELN.
    LOOP AT IT_PONO.
      WRITE : SY-VLINE , 2 IT_PONO-EBELN COLOR COL_KEY,
             12 SY-VLINE , 13 IT_PONO-EBELP COLOR COL_KEY,
             18 SY-VLINE , 19 IT_PONO-MATNR COLOR COL_NORMAL,
             37 SY-VLINE , 38 IT_PONO-WERKS COLOR COL_NORMAL,
             44 SY-VLINE , 45 IT_PONO-LGORT COLOR COL_NORMAL, 49 SY-VLINE..
    ENDLOOP.
ENDIF.
TOP-OF-PAGE.
IF R1 EQ 'X'.
*ULINE AT /1(48).
    WRITE : SY-VLINE ,2 'MATERIAL NUMBER',
            21 SY-VLINE , 22 'PLANT',
            27 SY-VLINE , 28 'STATUS',
            43 SY-VLINE , 44 'GRUP', 48 SY-VLINE.
    ULINE AT /1(48).
ENDIF.
IF R2 EQ 'X'.
    WRITE : SY-VLINE , 2 'PO NUMBER',
           12 SY-VLINE, 13 'ITEM',
           18 SY-VLINE,19 'MATERIAL NUMBER',
           37 SY-VLINE, 38 'PLANT',
           44 SY-VLINE, 45 'GRUP',
           49 SY-VLINE.
    ULINE AT /1(50).
ENDIF.
END-OF-PAGE.
ULINE AT /1(50).
WRITE :/10 'PAGE NUMBER', SY-PAGNO.
WRITE THE CONDITION WHAT EVER YOU WANT TO CHECK AND IF THAT IS TRUE SY-SUBRC = 0 THEN NO MESS IF NE 0 THEN RAISE A ERROR MESSAGE LIKE ABOVE
REWARD IF USEFULL

How to handle duplicate messages in J2SE File scenario

Similar Messages

Maybe you are looking for