How to handle Messages ?

Hi,
I like to handle the messages like
"Error: Insufficient privileges. (WWV-10600)".
Here, I want to give my custom message.
Is it possible to handle the messages ?
Please give the steps.
Thanks in Advance
Sudheer

Hi,
You cannot handle the errors raised in the renderers. You can handle the errors in the generated packages by changing the generated package and recompiling it.
Hope this helps.
Thanks,
Sharmila

Similar Messages

How to handle message prioritization in interface determination

Hi Experts,
How to handle the prioritization of messages if we say that for single source message it will be forwarded to 2 types of target messages.
Here's the scenario:
InterfaceDetermination object
SourceMessageA => TargetMessageTypeA
SourceMessageA => TargetMessageTypeB
Since both of the target messages will receive the source message, i want to prioritize that TargetMessageTypeB will be receive it first before TargetMessageTypeA.
Should I structure it in the Interface Determination as this:
SourceMessageA => TargetMessageTypeB
SourceMessageA => TargetMessageTypeA
or this should be handled by BPM? Let say BPM is the last option how could this be configured in ID?
Cheers,
R-jay

Hello Folk,
you have once option in the interface determination check the maintanence order at runtime , it will solve your problem.
regards,
Ravi.

How to handle messages correlated to a terminated process

In WLI 8.5, I have a process sending messages to a request queue (thanks to a WLI JMS control), and receiving message in a response queue (thanks to the same WLI JMS control).
The external process performing the work, reads messages from the request queue and publishes correlated responses. Those correlated responses can trigger the right process. This part works fine.
But if the response doesnâ€™t arrive in due time, there is a timeout path, the process continues and terminates gracefully.
If a correlated message arrives on a terminated process, I have ConversationNotFoundException in the console. Iâ€™d like to handle them in order to send a too late message to the sender.
How should I proceed?
I cannot catch the ConversationNotFoundException(s) in the terminated process.
How can I catch them ?
If I put an error queue to my response queue, I wonâ€™t be able to discriminate between ConversationNotFoundException and other delivery errors. What is the best practise to handle this case?

We had a similar issue encountered and there were a few observations by BEA support on this exception that are generic I think, so this may help you:
(Are you using a JMS Control as the explanation involves them and more importantly, a cluster!)
There are some architectural implications of using a jms control in a cluster, where the message flow is bidirectional.
The ConversationNotFoundException would in this case be a consequence of the fact that our automatic jms control machinery has lost track of the exact jpd instance that it is receiving a mesage from. This automatic machinery is that the jms correlation-id = the conversation-id= the jpd instanceid
see http://e-docs.bea.com/workshop/docs81/doc/en/workshop/javadoc-tag/jc/jms.html, but in a cluster environment, it could be mix up and not work like that.
So regarding your question if you can program a specific message to send when this error occurs, it looks difficult as it seems your JPD is now out of the picture and hence no logic would handle this scenario.
Nevertheless, I will watch this space for other suggestions as a workaround.

How to handle message "Exception condition "CNHT_ERROR_PARAMETER" raised"?

Hi,
Whenever I try to open Web Dynpro Comp./Intf->Views using transaction SE80, I am getting a short dump showing message "Exception condition 'CNHT_ERROR_PARAMETER' raised'. In the analysis, I have found that A RAISE statement in the program "CL_GUI_HTML_VIEWER============CP" raised the exception condition "CNHT_ERROR_PARAMETER". Since the exception was not intercepted by a superior program, processing was terminated. Can anyone help to get rid of this problem?
Thanks & Regards.
Deepjyoti

hi,
Looks like, ITS services are not fully active or not compeltely published.
Check whether webgui services are active in SICF.(test service).
Also, check all the ICM parameters.
Regards
Srinivas

Block or handle message alert in WebBroswer container

Hi,
I am trying to make an application for collecting data from the Web by using WebBrowser container and .NET technique.
In a cases, the web page had no data and showed a popup message (message warning dialog) from the server (not the dialog due to script error).
In this case, I have to click the OK button manually and cannot be manipulated automatically.
This dialog was provided by the server so the option of ScriptErrorsSuppressed is useless.
I tried to get some events like NewWindow by using event Callback but cannot detect the event.
I search this kind of popup in script programming but the solution candidated cannot be applied in my code.
For example, http://stackoverflow.com/questions/9770522/how-to-handle-message-boxes-while-using-webbrowser-in-c
Can I use user32.dll and related API functions like FindWindow with the embedded container of WebBrowser?
Or, is there any other way to remove forcely (without clicking) the Dialog box as well as all SubVIs when I unload the application?
My purpose is to remove (rather than handling) the dialog box automatically not to have a trouble in a long process.
labmaster

Hi
Theoretically you can write as many lines as you like in a static alert message using tr. ALRTCATDEF.
But if you use dynamic text to add error messages or other information coming from XI messages, that information can have a maximum length of 70 characters.
The reason is the ABAP types used for the "variables" that you add to your static text to make it dynamic are CHAR70 thus you will get your adapter error messages truncated to 70 characters for example.
Hope this answers your question.
-Sam.

How to handle rpc/encoded style messages using BizTalk?

I am integrating with a lot of services and one of our customers has a service with rpc/encoded style
I could consume and generate schema from their wsdl file via BizTalk consume WCF wizard.
Once I am trying to call the service with request message that generated from the schema, it is giving an error that can not desterilize the first element of the message.
No Deserializer found to deserialize a 'FieldName' using encoding style 'null'
I compared the stub xml request message from SaopUI and I noticed that the xml expecting the data type with the element like this .
<soapenv:Envelope xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:wsb="WSBanka">
<soapenv:Header/>
<soapenv:Body>
<wsb:bnkBorcsorgulama soapenv:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/">
<sozlesmeNo xsi:type="xsd:string">?</sozlesmeNo>
<bankaKodu xsi:type="xsd:string">?</bankaKodu>
<anahtar xsi:type="xsd:string">?</anahtar>
</wsb:bnkBorcsorgulama>
</soapenv:Body>
</soapenv:Envelope>
On the other hand, I got the request of the message from Fiddler using the BizTalk , and the generate xml of the BizTalk schema without the data type.
<soapenv:Envelope xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:wsb="WSBanka">
<soapenv:Header/>
<soapenv:Body>
<wsb:bnkBorcsorgulama>
<sozlesmeNo>?</sozlesmeNo>
<bankaKodu>?</bankaKodu>
<anahtar>?</anahtar>
</wsb:bnkBorcsorgulama>
</soapenv:Body>
</soapenv:Envelope>
In SoapUi, if I remove a datatype from the message, I will get same error from the BizTalk request.
I read some articles that rpc/encoded style are not supported but I am not sure and these articles are not clear.
I also read that it was supported with Soap adapter but now it is deprecated.
So, Is there any one has an experience in rpc/encoded style messages and how to handle these message in BizTalk or is there any work around to handle these messages?
Your inputs really appreciate it.
Thanks in advance,
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer

Hi,
Please refer to the document which might help you:
#RPC/Encoded Style
http://www.c-sharpcorner.com/UploadFile/martinkropp/DesigningInteroperableWebService11232005044847AM/DesigningInteroperableWebService.aspx

How To Handle Error Message In TCD Recording?

Hi All,
I tried recording a transaction (my own transaction) by not enterring value in an obligatory field. the error message came. but when i executed the script, it showed an error. but actualy, the error message was expected right? how to handle this situation? i tried with tcd and sapgui recording. both gave almot the same result.
i am including the script which i have written.
MESSAGE ( MSG_1 ).
*TCD ( ZCUST , ZCUST_1 , ECC ).
SAPGUI ( SAP_1 , ECC ).
ENDMESSAGE ( E_MSG_1 ).
v_mno = &tfill.
v_msg = E_MSG_1[v_mno]-msgtext.
v_mtp = E_MSG_1[v_mno]-msgtyp.
If Msg Type is E *** **** It Has To Be E ****
IF ( v_mtp = 'E' and v_msg = 'Account no AC02 does not exist EXIT = X').
logtext(0,'Passed').
ELSE.
log(v_mtp).
log(v_msg).
logtext(1,'Failed').
ENDIF.
End Of The Condition For Message Type E ******

I have recording messages using the TCD command.
My script (very simple):
MESSAGE ( MSG_2 ).
TCD ( ME21 , ME21_1 , R3 ).
ENDMESSAGE ( E_MSG_2 ).
In the MESSAGE command interface, I defined rules to allow several kind of messages.
Execution: 3 mesages found:
      * transform PR into PO
       MESSAGE     MSG_2 [1,009 sec]
         RULES MSG_2 = XML-DATA-01
        Message MODE EXIT TYPE ID    NR
        [1]      'A'         'I'   06    456
        [2]      'A'         'W'   'ME' 080
        [3]      'A'         'E'   'ZE' 029
         TCD    ME21                 [0,545 sec N] Target sys R3 -> ZDA010A219
        S06017 Standard PO created under the number 8201075606
           Tgt System Z_A219->R3->ZDA010A219 (ZDA 010 ... HP-UX ORACLE)
           CALL TRANSACTION ME21 ME21_1 XML-DATA-01
           03 MESSAGES FROM ME21 ME21_1 XML-DATA-01
           I 06 456 Release effected with release code 00001
           W ME 080 Delivery date: next workday is 02.05.2007
           S 06 017 Standard PO created under the number 8201075606
       ENDMESSAGE E_MSG_2 (&TFILL = 0)
As you can see, 3 messages are found but the &TFILL variable is still 0.
I guess (but cannot test yet) I would manage to record those messages using SAPGUI command.
Is there anything wrong with my script?
My SAP_BASIS component is in version 620. I'm not using the ultimate version of eCATT (no WEBDYNPRO command, etc.). Could it be an explanation?
Thank you in advance,
Olivier

How to handle error message during PAI?

Hi Experts,
Need help here.
In my dialog screen, I have a field which is typed 'QUAN'.
In entering different format , e.g. with non numeric value or a negative value, an error message appear and it does not process the MODULES inside the chain or FIELD MODULE ON REQUEST.
Does anyone knows how to handle this kind of error. I need to display into a separate screen the errors I encountered coz I'm creating a new RF transaction.
Points will be rewarded.
Thanks in advance.

Hai
in your case(RF case) it is other way...
yes you can use
field x_currency module check_currency.
in module check_currency.
you have to display errors in another screen say 200.
in that there will be 4 fields, all are display only fields.
X_MESSAGE-MSGV1 of type sy-msgv1
X_MESSAGE-MSGV2 of type sy-msgv2
X_MESSAGE-MSGV3 of type sy-msgv3
X_MESSAGE-MSGV4 of type sy-msgv4
you populate the messages with these fields and then display it in the screen.
method check_currency.
*--do all your checks here....
       if error
         clear x_message.
        x_message-msgv1 = 'Enter Valid Employee Number'(004).
        leave to screen 0200.
      endif.
    endif.
ENDMODULE.                 " VALIDATE_Currency
in screen 200 PBO you need to format the message
using the below logic.
       Method for formatting the message
method message_format.
    data : lt_text type table of tline,         "text table
           lx_text type tline.                  "work area
    refresh lt_text.
    clear lx_text.
    concatenate x_message-msgv1 x_message-msgv2 into lx_text-tdline
      separated by space.
    append lx_text to lt_text.
    clear lx_text.
    concatenate x_message-msgv3 x_message-msgv4 into lx_text-tdline
      separated by space.
    append lx_text to lt_text.
*- formatting the message
    call function 'FORMAT_TEXTLINES'
      exporting
        formatwidth = 20
      tables
        lines       = lt_text
      exceptions
        bound_error = 1
        others      = 2.
    clear: x_message.
*- transfer the message data to screen fields
    loop at lt_text into lx_text.
      if sy-tabix = 1.
        x_message-msgv1 = lx_text-tdline.
      elseif sy-tabix = 2.
        x_message-msgv2 = lx_text-tdline.
      elseif sy-tabix = 3.
        x_message-msgv3 = lx_text-tdline.
      elseif sy-tabix = 4.
        x_message-msgv4 = lx_text-tdline.
      else.
        exit.
      endif.
    endloop.
endmethod.                    "message_format
Regards
Vijay

How to handle parked message in BPM?

Hi,
I have a scenario that buyer as R3 send PO(same PO number) change idoc multiple times into bpm without receiving PO change confirmation(from seller, non R3) yet, I have a loop in bpm to handle this case, the loop checks the condition whether confirmation matches change request, if not, potential loop repeats. However, if I have multiple change request(same PO number) sent from R3 to BPM, my BPM waiting for my order confirmation, then if the first order confirmation comes into BPM matches with the first change request, then I exit the loop, but I still have several change requests parked at processXXXXX yet to be processed, does anybody came into similar situations? Any good suggestions or examples?
Thanks,
Maggie

Hi there,
I need to correlate ChangeConfirmation to ChangeRequest with PO number, this is for the purpose of ChangeRequest waiting for Confirmation for the same PO number. However, I don't know how to handle multiple changes come into BPM without confirmation yet, my current design is that I immediately enter a loop in BPM, with condition confirmation Info doese not match change info, thus the change request is bundled with bpm process, once the porcess is finished(response match change request), the queue of my other change requests(the parked ones) now got deleted, does anybody have any good suggestions in handling multiple change request(for same PO number) in bpm? Is there a way I can force bpm to handle one request one response, throw some error message if multiple changes comes together without response yet? Anybody had encountered similar issues?
Thanks,
Magge

How to handle error messages in BDC background mode

Hi experts,
I got one problem in BDC, We are uploading data throgh BDC program,that program is calling Standard Batch Input programs,
Now we got one requirement, i.e., In some special cases we have to send one message as a error message.I handled this in foreground but, how to handle this in background.

Hi,
if session is being used
automatically the log will begenereated in the sm35 transaction
but if call transaction is used
put all the error messages in the applicationserver using
open data set
and after the exectionof the program in the background
you have to run another progam which reads the data stroed inthe application server
that also with open data set only...
thanks & regards,
Venkatesh

How to handle xml message in proxy inbound processing?

Hi Experts,
I have a scenario that is SOAP Client====>XI===>ECC.
But i don't need to use the XI mapping,i skip mapping
in XI and use the generated proxy inbound processing.
Here is a message structure as below.
<commodityList>
■<commodity>
■■<detailNo>303303</detailNo>
■■<makerName>sony</makerName>
■■<ChargeInfoList>
■■■<productId>aaaa</productId>
■■■<name>bbb</name>
■■</ChargeInfoList>
■</commodity>
</commodityList>
When i sent the message without field entry of <productId>
and <name> i got the response in soap client as below.
<commodityList>
■<commodity>
■■<detailNo>303303</detailNo>
■■<makerName>sony</makerName>
■</commodity>
</commodityList>
The field tag <ChargeInfoList> doesn't display.
But i want it to display as below.
<commodityList>
■<commodity>
■■<detailNo>303303</detailNo>
■■<makerName>sony</makerName>
■■<ChargeInfoList>
■</commodity>
</commodityList>
In case of field entry is empty,how to let the response
contains tag?
As i know ,there is a CONTROLLER in proxy .
But i don't know if it is relevant to this
case and i don't know how to handle it.
Brand

Hi Mrudula,
As far as i know there are no content conversion methodology for HTTPS as the recevier adapter.
Also you can read through these links to confirm the same:
http://help.sap.com/saphelp_nw04/helpdata/en/0d/5ab43b274a960de10000000a114084/content.htm
http://publib.boulder.ibm.com/infocenter/wbihelp/v6rxmx/index.jsp?topic=/com.ibm.wbia_adapters.doc/doc/sap_xi/sapximst30.htm
SAP NetWeaver - XML Communication Interface (CA-XML) [original link is broken]
Regards,
abhy
note: reward the helpful.

How to handle HTTP Message Format

Hi All,
i have the interface like XML File(Supplier)--XI--HTTP Message Post(SRM Server)
How to handle this case and how to handle the HTTP Message formats, what Adapters and all i need to use here
Regards
Vamsi

check susma's reply
File to HTTP
File to HTTP
/people/kausik.medavarapu/blog/2005/12/29/csv-file-lookup-with-http-request-and-response-in-xi

How to handle the messages.

Hi,
I am doing interactive report. In that how to handle the error meesages.
Regards
Srinu

HI
IF YOU WANT HANDLE THE ERROE MESSAGES
*& Report ZNNR_REPORT
REPORT ZNNR_REPORT NO STANDARD PAGE HEADING <b>MESSAGE-ID ZNNR</b> LINE-SIZE 100 LINE-COUNT 65(4).
******DATA DECLARATIONS**********
DATA : BEGIN OF IT_PLANT OCCURS 0,
        MATNR LIKE MARA-MATNR,
        WERKS LIKE MARC-WERKS,
        PSTAT LIKE MARC-PSTAT,
        EKGRP LIKE MARC-EKGRP,
       END OF IT_PLANT.
DATA : BEGIN OF IT_PONO OCCURS 0,
        EBELN LIKE EKKO-EBELN,
        EBELP LIKE EKPO-EBELP,
        MATNR LIKE EKPO-MATNR,
        WERKS LIKE EKPO-WERKS,
        LGORT LIKE EKPO-LGORT,
       END OF IT_PONO.
TABLES EKKO.
********END OF DATA DECLARATIONS*********
********SELECTION SCREEN DESIGN ***********
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
PARAMETER : P_WERKS LIKE MARC-WERKS MODIF ID S1.
SELECT-OPTIONS : S_EBELN FOR EKKO-EBELN NO INTERVALS MODIF ID S2.
SELECTION-SCREEN END OF BLOCK B1.
SELECTION-SCREEN BEGIN OF BLOCK B2 WITH FRAME TITLE TEXT-004.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS : R1 RADIOBUTTON GROUP G1 DEFAULT 'X'.
SELECTION-SCREEN COMMENT 5(20) TEXT-002 FOR FIELD R1.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS : R2 RADIOBUTTON GROUP G1.
SELECTION-SCREEN COMMENT 5(20) TEXT-003 FOR FIELD R2.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK B2.
******END OF SELECTION SCREEN DESIGN****************
*********INITIALIZATION OF SELECTION SCREEN ELEMENTS.*****
INITIALIZATION.
P_WERKS = '1000'.
S_EBELN-LOW = '4500016926'.
S_EBELN-OPTION = 'EQ'.
S_EBELN-SIGN = 'I'.
APPEND S_EBELN.
CLEAR S_EBELN.
************END OF INITIALIZATION***********************
***********SCREEN MODIFICATIONS*******************
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
    IF R1 EQ 'X' AND SCREEN-GROUP1 EQ 'S2'.
      SCREEN-INPUT = 0.
      MODIFY SCREEN.
    ENDIF.
    IF R2 EQ 'X' AND SCREEN-GROUP1 EQ 'S1'.
      SCREEN-INPUT = 0.
      MODIFY SCREEN.
    ENDIF.
ENDLOOP.
********END OF SCREEN MODIFICATIONS*****************
***************SCREEN VALIDATIONS *****************
at selection-screen.
SELECT SINGLE *
           FROM EKKO
           INTO EKKO
           WHERE EBELN IN S_EBELN.
IF SY-SUBRC <> 0.
    SET CURSOR FIELD 'S_EBELN-LOW'.
    <b>MESSAGE E999 WITH TEXT-005</b>.
ENDIF.
********end of screen validation*****************
START-OF-SELECTION.
*set pf-status '100'.
IF R1 EQ 'X'.
    SELECT MATNR
           WERKS
           PSTAT
           EKGRP
       FROM MARC
       INTO TABLE IT_PLANT
       WHERE WERKS = P_WERKS.
    LOOP AT IT_PLANT.
      WRITE : SY-VLINE , 2 IT_PLANT-MATNR COLOR COL_KEY,
             21 SY-VLINE , 22 IT_PLANT-WERKS COLOR COL_KEY,
             27 SY-VLINE ,28 IT_PLANT-PSTAT COLOR COL_NORMAL,
             43 SY-VLINE ,44 IT_PLANT-EKGRP COLOR COL_NORMAL.
    ENDLOOP.
ENDIF.
IF R2 EQ 'X'.
    SELECT EBELN EBELP MATNR WERKS LGORT
           FROM EKPO
           INTO TABLE IT_PONO
           WHERE EBELN IN S_EBELN.
    LOOP AT IT_PONO.
      WRITE : SY-VLINE , 2 IT_PONO-EBELN COLOR COL_KEY,
             12 SY-VLINE , 13 IT_PONO-EBELP COLOR COL_KEY,
             18 SY-VLINE , 19 IT_PONO-MATNR COLOR COL_NORMAL,
             37 SY-VLINE , 38 IT_PONO-WERKS COLOR COL_NORMAL,
             44 SY-VLINE , 45 IT_PONO-LGORT COLOR COL_NORMAL, 49 SY-VLINE..
    ENDLOOP.
ENDIF.
TOP-OF-PAGE.
IF R1 EQ 'X'.
*ULINE AT /1(48).
    WRITE : SY-VLINE ,2 'MATERIAL NUMBER',
            21 SY-VLINE , 22 'PLANT',
            27 SY-VLINE , 28 'STATUS',
            43 SY-VLINE , 44 'GRUP', 48 SY-VLINE.
    ULINE AT /1(48).
ENDIF.
IF R2 EQ 'X'.
    WRITE : SY-VLINE , 2 'PO NUMBER',
           12 SY-VLINE, 13 'ITEM',
           18 SY-VLINE,19 'MATERIAL NUMBER',
           37 SY-VLINE, 38 'PLANT',
           44 SY-VLINE, 45 'GRUP',
           49 SY-VLINE.
    ULINE AT /1(50).
ENDIF.
END-OF-PAGE.
ULINE AT /1(50).
WRITE :/10 'PAGE NUMBER', SY-PAGNO.
WRITE THE CONDITION WHAT EVER YOU WANT TO CHECK AND IF THAT IS TRUE SY-SUBRC = 0 THEN NO MESS IF NE 0 THEN RAISE A ERROR MESSAGE LIKE ABOVE
REWARD IF USEFULL

How to handle "Memory Low" warning message?

Recently users have been getting a warning message when they log on: "Memory low. Leave the transaction before taking a break." When we look at SM50 the user has a status of "On Hold" and the reason column says "PRIV". We are on ECC 6.0 (since January 2010) and V7R1 (March 2011).
Usually the message is received as soon as the user logs on so it is not like it is related to a particular program. We can go weeks without any reported instance of the message so it is not a regular occurrence. Fortunately there does not seem to be any other symptom other than getting the message.
I have seen a post on an SAP forum that said to adjust the instance profile with these parameters:
rdisp/max_priv_time
rdisp/wppriv_max_no
I do not have any entries for this now and am not sure what the values should be.
Does anyone have any suggestions on how to handle this on an AS/400? Thanks in advance.
Alan

Hi Alan,
what 1024 ???
then we definetely do NOT need as4/MAXSHR64 !
I would normally at least go for em/initial_size_MB = 8000 - as you are having issues right now ...
Or is this a small DEV-system ?
then 4000 might be sufficient ...
(the 4096 is just crap - make it simple and use e.g. 4000 then ...)
Regards
Volker Gueldenpfennig, consolut international ag
http://www.consolut.com http://www.4soi.de http://www.easymarketplace.de

How to handle the multiple message on the screen

I am new to j2me. I am trying to write a simple program for instant messaging. I want to write a program that to handle incoming messages. Now I am able to display one message at a time but I dont know how to handle multiple messages. Do anyone can give an example?
Is that anyway that pop up an indication for new messages in j2me?
Need yours expertise to help me. Thanks.

Use a custom canvas to display messages. Then you can do whatever you want with it!

How to handle Messages ?

Similar Messages

Maybe you are looking for