How to handle multiple image montage with color corrections

I am using Photoshop CS5 and am creating a photo montage poster with about 30 images on it. The photos are not stellar and I need to change levels, exposure, saturation etc to each image. I was creating groups from layers for each image then dropping it onto the montage file, but I see that filters effect every layer below. I have a gradient layer as my background and I don't want it affected nor do I want every layer below affected. I created smart layers from each image, that works, but it really slows the system down. What is the smartest and most efficient way to handle this?
Thanks,
Lisa

use the clipping mask
so you make the adjustment layer, then click layer > create clipping mask
this essentially ties that adjustment to the layer below

Similar Messages

How to handle multiple inbound interfaces with WSDL messages

Hi All,
We have a synchronous: Abap Proxy -> XI -> WebService Scenario. The webservice has multiple SoapActions e.g. SearchForProduct_WithX, SearchForProduct_WithY each with different message types. We have tried to use the receiver determination to send the request to the correct soapaction using conditions e.g. if field X in the request is populated use SearchForProduct_WithX action/message.
But when we run it through the proxy we get this error:
<CODE>IF_DETERMINATION.TOO_MANY_IIFS_CASE_BE</CODE>
<ERRORTEXT>Multiple inbound interfaces not supported for synchronous calls</ERRORTEXT>
Does anybody know how we can get around this or how best to deal with the multiple soap actions per wsdl situation.

Hi Yaghya,
We have used conditions in the Interface Determination. Interestingly if we use an HTTP sender adapter we can use this configuration ... but once we try and use ABAP proxies we get the previous error.
Another related question ... when we use the http adapter we get a connection time out exception. Same thing happens if we try and use the wsdl tester at /wsnavigator but we can open the wsdl through the browser. Any idea on this one?
Thanks for all your help.

How to handle multiple selection in the Spark List control with checkbox as itemrenderer?

Hi All,
I am using checkbox as an ItemRenderer in spark list.
I have a query.
how to handle multiple selection in the Spark List control with checkbox as itemrenderer?
how to retrieve the selected item label?
Thank you in advance.

Hi there, I'll tweak your code a little bit to something like this:
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml"
                layout="vertical">
    <mx:Script>
        <![CDATA[
             import mx.events.ListEvent;
             import mx.controls.CheckBox;
           [Bindable]
           private var mySelectedIndexes:ArrayCollection=new ArrayCollection();
            private function onChange(e:ListEvent):void
               if(CheckBox(e.itemRenderer).selected){
                         mySelectedIndexes.addItem(e.rowIndex);
               }else{
                              mySelectedIndexes.removeItemAt(mySelectedIndexes.getItemIndex(e.rowIndex));
               chkList.selectedIndices=mySelectedIndexes.toArray();
        ]]>
    </mx:Script>
<mx:ArrayCollection id="collection">
        <mx:Object label="Test A"/>
        <mx:Object label="Test B"/>
        <mx:Object label="Test C"/>
        <mx:Object label="Test D"/>
        <mx:Object label="Test E"/>
        <mx:Object label="Test F"/>
        <mx:Object label="Test G"/>
    </mx:ArrayCollection>
<mx:List id="chkList" dataProvider="{collection}" itemRenderer="mx.controls.CheckBox" itemClick="onChange(event);" allowMultipleSelection="true"/>
</mx:Application>

How to handle multiple connection or user with l2cap

hi friends,
I need your help please a.s.a.p
how to handle multiple connection with l2cap protocol in j2me
sorry,
I'm a new programmer in j2me
thanks all...

Please stick with the original thread http://forum.java.sun.com/thread.jspa?threadID=5200413&tstart=0
Cross-posting is very rude, and JSch has nothing to do with JSSE, directly. It is an SSH2 API. It does (AFAIK) use some parts of JSSE, but those parts are definately not your problem.
You already have answers in the other thread.

How to handle multiple tables data in Entity Beans?

How to handle multiple tables data in Entity Beans?
i mean, my bean (non trivial) is responsible for frequent
insertion in one table and some deletion on another table.
Can anyone of you...please..?

Is your data model right? If you are adding in one and deleting in another it sounds to me more like a process that an entity, in which case you may revisit your data model and simplify it, add in a session bean with the process method to co-ordinate between the two.
However, if you want to map multiple different tables within a single entity bean it is possible and just part of the mapping. How you actualyl specify it depends on which implementation you are working with.
Cheers,
Peter.

How to handle multiple datasources in a web application?

I have a J2EE Web application with Servlets and Java ServerPages. Beside this I have a in-house developed API for certain services built using Hibernate and Spring with POJO's and some EJB.
There are 8 databases which will be used by the web application. I have heard that multiple datasources with Spring is hard to design around. Considering that I have no choice not to use Spring or Hibernate as the API's are using it.
Anyone have a good design spesification for how to handle multiple datasources. The datasource(database) will be chosen by the user in the web application.

Let me get this straight. You have a web application that uses spring framework and hibernate to access the database. You want the user to be able to select the database that he wants to access using spring and hibernate.
Hopefully you are using the Spring Framework Hibernate DAO. I know you can have more that one spring application context. You can then trying to load a seperate spring application context for each database. Each application context would have it's own configuration files with the connection parameters for each datasource. You could still use JNDi entries in the web.xml for each datasource.
Then you would need a service locater so that when a user selected a datasource he would get the application context for that datasource which he would use for the rest of his session.
I think it is doable. It means a long load time. And you'll need to keep the application contexts as small as possible to conserve resources.

How to handle multiple actions in the webservice ?

Hi Guys,
I have multiple operations in the webservcie and under soap action in the receiver soap adapter, i dont know how to handle multiple soap operations.
can anybody guide me, how to acheive this ?
Thanks,
srini

Hi Srini !
This weblog shows the general design of a scenario with BPM
/people/krishna.moorthyp/blog/2005/06/09/walkthrough-with-bpm
This link:
http://help.sap.com/saphelp_nw04/helpdata/en/de/766840bf0cbf49e10000000a1550b0/content.htm
show how to insert a predefined BPM pattern. You could use one of the BpmPatternSerialize.... patterns to see how you BPM should look like...
Basically it should be:
1) Receive Step (async/sync, as you need) to trigger the BPM
2) Send step (sync) for first webservice
3) Send step (sync) for second webservice
N) Send step (sync) for N webservice
N+1) if the whole communication is sync, here you need to use a send step to return back the answer to sender.
Regards,
Matias.

How to handle multiple site to site IPsec vpn on ASA, any best practice to to manage multiple ipsec vpn configrations

how to handle multiple site to site IPsec vpn on ASA, any best practice to to manage multiple ipsec vpn configurations
before ver 8.3 and after version 8.3 ...8.4.. 9 versions..

Hi,
To my understanding you should be able to attach the same cryptomap to the other "outside" interface or perhaps alternatively create a new crypto map that you attach only to your new "outside" interface.
Also I think you will probably need to route the remote peer ip of the VPN connection towards the gateway IP address of that new "outside" and also the remote network found behind the VPN connection.
If you attempt to use VPN Client connection instead of L2L VPN connection with the new "outside" interface then you will run into routing problems as naturally you can have 2 default routes active at the sametime (default route would be required on the new "outside" interface if VPN Client was used since you DONT KNOW where the VPN Clients are connecting to your ASA)
Hope this helps
- Jouni

How to move multiple images in applet

Hi,how to move multiple images in applet or random images in applet .
Means moving images.gif around the applet with different starting point ,help me to create that move method ..

why don't you check the tumbling duke applet as provided free in this site? :-)

How to add multiple images in jinternalframe

Hi all,
how to add multiple images to the jinternalframe, at specified location of the pane and resizing the images with specified height and width.
code examples are highly appreciated.
Thanks & Regards,
Abel

Thanks, it works perfectly. It's a really smart way of fixing the problem too :)
I also found your toggle button icon classes which is something I've also had a problem with.
Thanks.

How to handle multiple streams

Hi
I wanted to handle multiple source Streams with Player. do i need to create a each player for each Stream ?? how can i do that ??
Thanks in Advance,
Karthikeyan R

It's not at all obvious what a SequenceOutputStream would do. The way to write lots of stuff over a socket is to wrap multiple output streams round sock.getOutputStream and flush each one when you've finished with it. (There may be issues with compressed / bit output streams).

How to handle multiple save exceptions (Bulk Collect)

Hi
How to handle Multiple Save exceptions? Is it possible to rollback to first deletion(of child table) took place in the procedure.
There are 3 tables
txn_header_interface(Grand Parent)
orders(parent)
order_items (Child)
One transaction can have one or multiple orders in it.
and one orders can have one or multiple order_items in it.
We need to delete the data from child table first then its parent and then from the grand parent table.if some error occurs anywhere I need to rollback to child record deletion. Since there is flag in child table which tells us when to delete data from database.
Is it possible to give name to Save exceptions?
e.g.
FORALL i IN ABC.FIRST..ABC.LAST SAVE EXCEPTIONS A
FORALL i IN abc.FIRST..ABC.LAST SAVE EXCEPTIONS B
if some error occurs then
ROLLBACK A; OR ROLLBACK B;
Please find the procedure attached
How to handle the errors with Save exception and rollback upto child table deletion.
CREATE OR REPLACE
PROCEDURE DELETE_CONFIRMED_DATA IS
TYPE TXN_HDR_INFC_ID IS TABLE OF TXN_HEADER_INTERFACE.ID%TYPE;
TXN_HDR_INFC_ID_ARRAY TXN_HDR_INFC_ID;
ERROR_COUNT NUMBER;
BULK_ERRORS EXCEPTION;
PRAGMA exception_init(bulk_errors, -24381);
BEGIN
SELECT THI.ID BULK COLLECT
INTO TXN_HDR_INFC_ID_ARRAY
FROM TXN_HEADER_INTERFACE THI,ORDERS OS,ORDER_ITEMS OI
WHERE THI.ID = OS.TXN_HDR_INFC_ID
AND OS.ID = OI.ORDERS_ID
AND OI.POSTING_ITEM_ID = VPI.ID
OI.DW_STATUS_FLAG =4 --data is moved to Datawarehouse
MINUS
(SELECT THI.ID FROM TXN_HEADER_INTERFACE THI,ORDERS OS,ORDER_ITEMS OI
WHERE THI.ID = OS.TXN_HDR_INFC_ID
AND OS.ID = OI.ORDERS_ID
OI.DW_STATUS_FLAG !=4);
IF SQL%NOTFOUND
THEN
EXIT;
END IF;
FORALL i IN TXN_HDR_INFC_ID_ARRAY.FIRST..TXN_HDR_INFC_ID_ARRAY.LAST SAVE
EXCEPTIONS
DELETE FROM ORDER_ITEMS OI
WHERE OI.ID IN (SELECT OI.ID FROM ORDER_ITEMS OI,ORDERS
OS,TXN_HEADER_INTERFACE THI
WHERE OS.ID = OI.ORDERS_ID
AND OS.TXN_HDR_INFC_ID = THI.ID
AND THI.ID = TXN_HDR_INFC_ID_ARRAY(i));
FORALL i IN TXN_HDR_INFC_ID_ARRAY.FIRST..TXN_HDR_INFC_ID_ARRAY.LAST SAVE
EXCEPTIONS
DELETE FROM ORDERS OS
WHERE OS.ID IN (SELECT OS.ID FROM ORDERS OS,TXN_HEADER_INTERFACE THI
WHERE OS.TXN_HDR_INFC_ID = THI.ID
AND THI.ID = TXN_HDR_INFC_ID_ARRAY(i));
FORALL i IN TXN_HDR_INFC_ID_ARRAY.FIRST..TXN_HDR_INFC_ID_ARRAY.LAST SAVE
EXCEPTIONS
DELETE FROM TXN_HEADER_INTERFACE THI
WHERE THI.ID = TXN_HDR_INFC_ID_ARRAY(i);
COMMIT;
DBMS_OUTPUT.PUT_LINE(TO_CHAR(SYSDATE, 'DD-MON-YY HH:MIPM')||':
DELETE_CONFIRMED_DATA: INFO:DELETION SUCCESSFUL');
EXCEPTION
WHEN OTHERS THEN
ERROR_COUNT := SQL%BULK_EXCEPTIONS.COUNT;
DBMS_OUTPUT.PUT_LINE(TO_CHAR(SYSDATE, 'DD-MON-YY HH:MIPM')||':
DELETE_CONFIRMED_DATA: ERROR:Number of errors is ' ||ERROR_COUNT);
FOR indx IN 1..ERROR_COUNT LOOP
DBMS_OUTPUT.PUT_LINE('Error ' || indx || 'occurred during
'||'iteration'||SQL%BULK_EXCEPTIONS(indx).ERROR_INDEX);
DBMS_OUTPUT.PUT_LINE('Error is '
||SQLERRM(-SQL%BULK_EXCEPTIONS(indx).ERROR_CODE));
END LOOP;
END DELETE_CONFIRMED_DATA;
Any suggestion would be of great help.
Thanks in advance
Anu

If you have one or two places in your code that need multiple exceptions, just do it with multiple catch statements. Unless you are trying to write the most compact Programming 101 homework program, inventing tricks to remove two lines of code is not good use of your time.
If you have multiple catches all over your code it could be a code smell. You may have too much stuff happening inside one try statement. It becomes hard to know what method call throws one of those exceptions, and you end up handling an exception from some else piece of code than what you intended. E.g. you mention NumberFormatException -- only process one user input inside that try/catch so it is easy to see what error message is given if that particular input is gunk. The next step of processing goes inside its own try/catch.
In my case, the ArrayIndexOutOfBoundsException and
NumberFormatException should be handled by the same way.Why?
I don't think I have ever seen an ArrayIndexOutOfBoundsException that didn't indicate a bug in the code. Instead of an AIOOBE perhaps there should be an if statement somewhere that prevents it, or the algorithm logic should prevent it automatically.

Multiple Image Upload with Save to DB - any help would be appreciated

Hi - I'm running into the following issue when using the Multiple Image Upload with Save to DB behaviour.
When I click the link to upload multiple files, I am given the list of local files to choose to upload. No problem here - I can select multiple files.
When i select choose, the uploader shows the progress but hangs at 0%
However (if I cancel the uploads), the first image of the group is uploaded and it's corresponding database entry is entered correctly.
Anyone else have this hangup? If so how did you get around it?
Thanks!
Dan

Just thought I would update.
The problem seems to be related to redirecting.
I had specified a redirect page, which of course stops the flash file from continuing to upload images after the first one.
Anyone know how to change this so when the flash uploader finished it goes back to a list page?
Thanks again.

Multiple image upload with save to database wizard problem

hi,
i need to upload multiple images (6) in a table called pictures. i will need the names stored in the database and the files uploaded on the server. since i am new to dreamweaver i can not figure out on how to make this work.
the multiple image upload wizard uploads the images fine and creates a subfolder with the right id but i have no file names in the database at this point. i tried the multiple image upload with save to database wizard but i only get one upload button. it worked fine with one image but i need 6 pics uploaded. the i tried to first upload the pictures with the multiple image upload wizard and use the update wizard to add the names afterwards but that did not work either. hmm. would be great if someone could help me out.
thanks, jan

Thank you for the responses. I have already updated awhile ago, so I am wondering what happened. Not sure if during the server update, some files were replaced (unless I totally forgot to update to 1.0.1 on this site). So I reinstalled 1.0.1, deleted the includes folder from the server and uploaded my includes folder and it now works again.
Again, thanks for the help.
Jeremy

Multiple Image upload with save to database

Hi everyone,
I wonder whether anyone can help me, I have been trying to use the multiple image upload with save to database wizard. When I create the page and upload it and then view it in Safari the only thing that is on the page is an upload button. When I press the upload button I am able to browse my files and select them. When this window closes a flash loading value is shown but no images have been uploaded.
Am I missing anything? I have had no problems uploading single files and creating albums. I want to create an online gallery so that I can do a multiple upload to a specific album if this is possible.
Cheers
Sarah

Hi Sarah,
>>
but only the filename appeared in the database and no other information was stored.
>>
that´s how it´s been designed also in the "single upload" -- the path_to_the_folder where the files sit in have to be determined elsewhere
>>
{wedimg_idalb}
>>
I don´t see any reference to this "dynamic data" placeholder in any of your table columns you posted -- where does this one come from ?
>>
1. I have multiple clients and each client has their own set of images.
2. Each set of client images must be linked to an album via the album ID
>>
do you have any "foreign key" which is related to the user_table´s ID in order to make user ID 2 upload his images in album ID 2 ? How will the upload page "know" where the images are going to be uploaded to ?
>>
and the album page, wedding_alb
>>
to my mind *this* table would itself need a foreign key to the user_table in order to "map" record 2 to user ID 2 -- or do I miss something ?
Günter Schenk
Adobe Community Expert, Dreamweaver

How to handle multiple image montage with color corrections

Similar Messages

Maybe you are looking for