How to handle o.s. upgrades in a rac env?

I just installed oracle grid 11.2.0.3 and rdbms 11.2.0.3 on redhat linux 6 fdisk. The operating system is currently running Linux 2.6.32-71.el6.x86_64 #1 SMP Wed Sep 1 01:33:01 EDT 2010 x86_64 x86_64 x86_64 GNU/Linux
The cusomter now want to udate their redhat so that it will be Linux 2.6.32-279.5.1.el6.x86_64 #1 SMP Tue Jul 24 13:57:35 EDT 2012 x86_64 x86_64 x86_64 GNU/Linux.
I have a couple questions.
1. how do I disable to clusteware from starting up so that they will be able to update their o.s.?
2. What needs to be done with the oracle software once the operating system has been upgraded? Do I need to relink? Not sure have not upgraded the o.s. and any of the database installations I have worked on.
Any help is greatly appreciated.
p.s. we are using custom udev rules for device persitence for our asm devices.
Thanks.

You will need to relink Oracle binaries following the OS upgrade. Pl see this MOS Doc
Is It Necessary To Relink Oracle Following OS Upgrade? [ID 444595.1]
HTH
Srini

Similar Messages

How to handle common system crashes in SAP Business One until you upgrade to SAP Business One 9.1?

SAP Business One 9.1 is about to release in this year with many feature enhancements in various areas, such as in Business Logic and Localization, Reporting and Analytics, Lifecycle Management and Support, SDK Features for extensibility, Infrastructure and Architecture, etc. , with this upgrade every organization using SAP Business One is also expecting that some previous System Crash problems associated with SAP Business One 8.8 or 9.0, will also be resolved with the advent of 9.1.
But until 9.1 is available in GA, we have to know and follow some procedures to avoid this situation. Through this blog we have addressed ‘How to handle common system crashes in SAP Business One until you upgrade to SAP Business One 9.1’. In below link you can have a look that what common system crash issues been reported and what solution given by the community members:
common system crashes in SAP Business One

Hi,
Thanks for sharing valuable information with us. You may repost this discussion as "Document" or Blog type.
Thanks & Regards,
Nagarajan

How is a KM Configurable Handled via an Upgrade?!

Hi there,
Does anyone know if there is any official documentation (or does the responsible SAP developer know this; I have got my own experience, but have never ever seen this documented) about how existing configurables within KM are handled when an upgrade is performed?
I have got two scenarios in mind:
1.) A customer changes let's say the AdminExplorer and replaces one of the standard collection renderers. With the next upgrade, with which the AdminExplorer is delivered, will this be overwritten? And besides: What is to be expected to be delivered, as patches / SPS are cumulative - the whole config?
2.) A customer decides to implement lets say a command; he will call it "ABCDE". One month later, SAP creates a new feature within KM, providing this by delivering a command called "ABCDE". Which (bad) scenario will the customer have to struggle with? Will he have lost his own command? Or will he be in the situation that his command is preserved, but he won't have the new standard available?
Once again, I think I know the de-facto-behaviour, what I'm interested in is how SAP plans such cases to be handled. Probably it is a design issue not to have provided namespaces for all configurables, so that there cannot be a seperation between SAP-configs and customer-configs.
Any documentation on this? Any insider knowledge?!
Thanks in advance
Detlev

Hi Detlev,
Youre right; there is no documentation on these config-merge details / commands.
The default behaviour of the Configuration Framework on upgrade/deployment is to keep always the custom configurations, as created / modified by the customer.
If SAP needs the default configurable to be changed, there are config commands that are additionally provided in the configarchives. Such commands are individually written by the developers providing the configuration. The delete command deletes the configurable to enable immediate redeployment of the updated configurable or they e.g. explicitly delete an old value and add the new one. As using such delete command will delete the custom configuration we use it quite carefully and only in extraordinary cases in order to avoid problems at customer side.
A modify command is not possible for configurables.
This is why newly deployed configarchives do normally not override the already deployed configurables.
Coming to your scenarios:
1)     No overwriting.
A SPS contains whole default config indeed. Patches contain just configarchives if contained in the par / project per default.
2)     Considering this example in UI command area customer will keep his config but miss the new default one. Config might get mixed up as new object might be referenced as well by other (new) configurables.
I just can suggest to have kind of an own namespace by using explicit prefixes to avoid such theoretical incident.
Hope this helps.
Best regards, Peter Hartwich

How to handle delta SPDD & SPAU adjustments in the 2nd Upgrade QA & PRD

Dear all,
We have successfully upgraded our development box and we have made the SPDD changes into a single transport requests and also the SPAU requests in a different requests.
Our ABAP team has made the SPDD adjustments comparing the objects with production and QA.
Now when we upgrade our QA box we have included the SPDD & SPAU transports and now we found that we have about 8 extra objects that needs to be modified manually in SPDD phase? out of 79 objects 71 is adjusted my out SPDD transports and it has left out 8 more objects.
These 8 objects were never shown in SPDD phase of our development box.
Can you please suggest us, like how to handle these delta objects, so that we won't phase the same issue when we move to production. (offcourse we will do 2-3 dry runs before going to production)
I have read the below note, but it is for the older version (without shadow instance)
Note 124522 - Importing a modification adjustment in 2nd upgrade
Thanks &
Regards
Senthil

1.If you have choosen strategy resource-minimized, they are adjusted during downtime before the ABAP Dictionary is activated.
copy the cofiles and datafiles in the respective directories. List all the requests in umodauto.lst.
In PREPARE phase ADJUSTPRP the following screen appears
For automatically maintaining your modification in your ystem during the upgrade transport request from earlier upgrades are searched in the umoauto.lst in directory /usr/sap/trans/bin..
The file could not be read
There are several reason why this may be correct
eg: 'this is your first upgrade' or 'your system is not modified'.
Did you expect a list of transports being found?
->Confirm a list of transports to be included in the upgrade
Select Yes & OK
Click on Yes to include the transport
Click Yes to stop the ACT_700 phase and check the results of SPDD
2.You can add additional requests to umodauto.lst
3. Regarding why its how in QA.? Reasons could be
1modification could have been done only in QA
2)Are the DEV and QA are on the same kernel & SP level's

How to handle/extract Hierarchies in master data from R3

Hi Experts!!!
Iu2019m currently working on HR Implementation project and this is my first project. Implementation is being done in BI 7.0 and ECC 6.0. I have some queries regarding the extraction of master data from R3 as furnished below.
1. By default all the datasources are in 3.x technology and Iu2019ve migrated all the datasources with export and successfully performed InfoPackages and DTPS into their respective InfoObjects/Data targets. But when it comes to the masterdata datasources with hierarchies, Iu2019m unable to migrate them as there is no MIGRATE option in the context menu. When I tried to create infopackage, it asked me to create Transfer rules first and perform InfoPackage. Is it mandatory to work in 3.x technology (Transfer rules/ Update rules) in case of master data hierarchies? In this case how to handle datasources with hierarchies?
2. Is it required to have any data staging component like DSO while extracting master data datasources from SAP R/3 to their respective InfoObjects (Data targets)?? Or can I directly schedule Infopackage and DTP directly into the InfoObject with out any DSOS in between for HR master data??
Good day!!!

hello,
1)
all DataSource that are created in BI 7.0 are new design, master data attribute, text and transaction DataSource can all be created in the new BI 7.0, but for hierarchy DataSource, it remains as 3.X, if you double click on the Hier DataSource, you will see the title "...Emulated 3.X ...", so the DataSource should be working perfectly fine except it is in "Modified" version, i believe it is just SAP has not or can't a way to upgrade hier DataSource.
Also,
RSDS doesnt support hierarchy datasources in BI 7.0. So we cannot use transformations and DTP with hierarchy. So it is very similar to the way we used to load it in 3.x.
Check below link for step by step procedure to load hierarchy using flat file:
http://help.sap.com/saphelp_nw04s/helpdata/en/fa/e92637c2cbf357e10000009b38f936/content.htm
2)
i dont think you need a DSO in between for laoding master data from R/3 to BI IO.
Reg,
Dhanya

How to handle the Timestamp datasource while migration

Hi All
" I tried searching the forum,but didnt get the relevant one,hence posting this question".
While migration from 4.7 to ECC in R/3 system,
how to handle the Timestamp datasources( especially FI like COPA and other ) while extarcting the data from source to BW during source system migration.Since we need to empty the delta queue and should make sure that there are no delta records exists in delta queue.
Like for sales datasources using LO,we will be executing the V3 jobs for execting the LUW's from LBWQ to RSA7? In the same way is there any particular way for this also.
Anyone whi knows abt this pls share your views
Regards
Shankar

Hello Shankar.
Before the upgrade (import of a queue), all extraction queues and open
update orders in all clients must be processed. The content of the setup
tables must be deleted. To avoid problems during the upgrade or to
correct them, carry out the following steps:
1. Call transaction SMQ1 and check whether all queues in all clients
(client = '', queue name 'MCEX') have been processed. To process the
queues, start the collective run report for each application in the
displayed clients. If you no longer need the data in the BW system,
deactivate the relevant extraction queues and DataSource in the LO
cockpit (transaction LBWE) and delete the queue entries in transaction
SMQ1.
2. If you use the V3 update that is not serialized (usually only for
application 03): Start collective run report RMBWV303. Then check the
update orders in transaction SM13. If there are incorrect update orders
in transaction SM13, correct the orders and then start the collective
run report again. If you no longer require the update orders, you can
delete them. There may be inconsistencies between tables VBMOD and
VBHDR. For further information about this, see Notes 652310 and 67014.
3. Before the upgrade, delete the contents of the setup tables. Execute
report RMCEX_SETUP_ENTRIES to find out which setup tables still contain
entries. You can use transaction LBWG to delete the contents of the
setup tables for all clients.
Unfortunately the check that the system carries out during the upgrade
or when you import a Support Package does not display all affected
applications. Therefore, Note 1083709 provides a check report that you
can use to determine all affected applications and tables or queues.
More detailed information please check these following notes:
1083709-Error when you import Support Packages
1081287-Data extraction orders block the upgrade process
I hope I can be helpful.
Thanks,
Walter Oliveira.

How to handle exception CX_SY_REF_IS_INITIAL

hi experts,
im working on a test scenario for abap mapping in SAP XI im getting this error
An exception with the type CX_SY_REF_IS_INITIAL occurred, but was neither handled locally, nor declared in a RAISING clause Dereferencing of the NULL reference
i understand that i need to catch this exception in the abap coding but i'm not familiar with oops concepts
can any one please suggest me how to handle this exception for the following code...
method IF_MAPPING~EXECUTE.
break x1149.
* initialize iXML
TYPE-POOLS: ixml.
class cl_ixml definition load.
** Instances & Variable declaration =======================
* instance main factory
TYPES: BEGIN OF t_xml_line,
          data(256) TYPE x,
        END OF t_xml_line.
DATA: l_ixml TYPE REF TO if_ixml,
* instance input stream factory
   l_streamfactory TYPE REF TO if_ixml_stream_factory,
* instance input stream
l_istream TYPE REF TO if_ixml_istream,
* instance input document
l_document TYPE REF TO if_ixml_document,
* instance parse input document
l_parser TYPE REF TO if_ixml_parser,
* instance for elements within the nodes
node      TYPE REF TO if_ixml_node,
*instance of nodemap
nodemap   TYPE REF TO if_ixml_named_node_map,
* instance for iterator
iterator TYPE REF TO if_ixml_node_iterator,
name      TYPE string,
value     TYPE string,
* instance main factory
   o_ixml   TYPE REF TO if_ixml,
* instance output document
   o_document TYPE REF TO if_ixml_document,
* instance output stream
o_istream TYPE REF TO if_ixml_ostream,
* instance parse output document
o_parser TYPE REF TO if_ixml_parser,
* instance fot renderer
renderer type ref to if_ixml_renderer,
irc type i,
l_xml_size   TYPE i,
*ROOT ELEMENT
l_element_MT_DEMANDTEC_COST TYPE REF TO if_ixml_element,
*NEXT CHILD ELEMENT FROM THE ABOVE PARENT
l_element_DT_DEMANDTEC TYPE REF TO if_ixml_element,
*CHILDREN1 ELEMENT FOR DT_DEMANDTEC
l_element_DT_WHSE TYPE REF TO if_ixml_element,
*CHILDREN2 ELEMENT FOR DT_DEMANDTEC
l_element_DT_DC    TYPE REF TO if_ixml_element,
*CHILDREN3 ELEMENT FOR DT_DEMANDTEC
l_element_DT_PLANT    TYPE REF TO if_ixml_element,
*CHILDREN4 ELEMENT FOR DT_DEMANDTEC
l_element_DT_QTY    TYPE REF TO if_ixml_element.
*saving the xml document
DATA: l_xml_table       TYPE TABLE OF t_xml_line.
types: begin of t_source,
          whse(5),
          dc(4) ,
          plant(4),
          qty    type i,
         end of t_source.
types: tt_source TYPE STANDARD TABLE OF t_source.
data: wa_source type t_source.
data: it_source TYPE tt_source,
        ivalue type string.
* Procedures and business logic =======================================
*   Creating the main iXML factory
l_ixml = cl_ixml=>create( ).
*   Creating a stream factory
l_streamfactory = l_ixml->create_stream_factory( ).
* create input stream
l_istream = l_streamfactory->create_istream_xstring( source ).
* initialize input document
l_document = l_ixml->create_document( ).
* Create a Parser
l_parser = l_ixml->create_parser( stream_factory = l_streamfactory
                                      istream        = l_istream
                                      document       = l_document ).
* parse input document
l_parser->parse( ).
*   Validate a document
l_parser->set_validating( mode = if_ixml_parser=>co_validate ).
*   Parse the stream
IF l_parser->parse( ) NE 0.
    IF l_parser->num_errors( ) NE 0.
      DATA: parseerror TYPE REF TO if_ixml_parse_error,
            str        TYPE string,
            i          TYPE i,
            count      TYPE i,
            index      TYPE i.
      count = l_parser->num_errors( ).
      WRITE: count, ' parse errors have occured:'.
      index = 0.
      WHILE index < count.
        parseerror = l_parser->get_error( index = index ).
        i = parseerror->get_line( ).
        WRITE: 'line: ', i.
        i = parseerror->get_column( ).
        WRITE: 'column: ', i.
        str = parseerror->get_reason( ).
        WRITE: str.
        index = index + 1.
      ENDWHILE.
    ENDIF.
ENDIF.
*   Process the document
IF l_parser->is_dom_generating( ) EQ 'X'.
    refresh : it_source.
    node ?= l_document.
    CHECK NOT node IS INITIAL.
*   create a node iterator
    iterator = node->create_iterator( ).
*   get current node
    node = iterator->get_next( ).
*   loop over all nodes
    WHILE NOT node IS INITIAL.
      CASE node->get_type( ).
        WHEN if_ixml_node=>co_node_element.
*         element node
          name    = node->get_name( ).
          nodemap = node->get_attributes( ).
        WHEN if_ixml_node=>co_node_text.
*         text node
          value = node->get_value( ).
          if name eq 'DT_WHSE'.
            wa_source-whse = value.
          ELSEIF name eq 'DT_DC'.
            wa_source-DC = value.
          ELSEIF name eq 'DT_PLANT'.
            wa_source-PLANT = value.
          ELSEIF name eq 'DT_QTY'.
            wa_source-QTY = value.
            COLLECT wa_source INto it_source.
            CLEAR   wa_source.
          ENDIF.
      endcase.
      node = iterator->get_next( ).
    endwhile.
ENDIF.
loop at it_source into wa_source .
    at first.
*       Creating a ixml factory
      o_ixml = cl_ixml=>create( ).
*       Creating the dom object model
      o_document = l_ixml->create_document( ).
    endat.
*       Build and Fill root node MT_DEMANDTEC_COST
    AT FIRST.
      l_element_MT_DEMANDTEC_COST    =
O_document->create_simple_element(
                              name   = 'MT_DEMANDTEC_COST'
                              parent = o_document ).
    ENDAT.
*      Build and Fill Child node DT_DEMANDTEC for parent
*                                                  MT_DEMANDTEC_COST
    l_element_DT_DEMANDTEC    = O_document->create_simple_element(
                                 name   = 'DT_DEMANDTEC'
                                 parent = l_element_MT_DEMANDTEC_COST ).
*      Build and Fill Child node1 DT_WHSE for parent DT_DEMANDTEC
    ivalue              = wa_source-WHSE.
    l_element_DT_WHSE    = O_document->create_simple_element(
                                     name   = 'DT_WHSE'
                                     VALUE = ivalue
                                     parent = l_element_DT_DEMANDTEC ).
*      Build and Fill Child node2 DT_WHSE for parent DT_DEMANDTEC
    ivalue              = wa_source-DC.
    l_element_DT_DC   = O_document->create_simple_element(
                                         name   = 'DT_DC'
                                          VALUE = ivalue
                                parent = l_element_DT_DEMANDTEC ).
*      Build and Fill Child node3 DT_WHSE for parent DT_DEMANDTEC
    ivalue              = wa_source-PLANT.
    l_element_DT_PLANT   = O_document->create_simple_element(
                                             name   = 'DT_PLANT'
                                              VALUE = ivalue
                               parent = l_element_DT_DEMANDTEC ).
*      Build and Fill Child node4 DT_QTY for parent DT_DEMANDTEC
    ivalue              = wa_source-QTY.
    l_element_DT_QTY     = O_document->create_simple_element(
                                             name   = 'DT_QTY'
                                              VALUE = ivalue
                               parent = l_element_DT_DEMANDTEC ).
endloop.
* render document ======================================================
* create output stream
o_istream = l_streamfactory->create_ostream_xstring( result ).
*   Connect internal XML table to stream factory
o_istream = l_streamfactory->create_ostream_itable( table =
l_xml_table ).
renderer = o_ixml->create_renderer( ostream = o_istream
                                          document = o_document ).
irc = renderer->render( ).
* how do i catch the exception for type CX_SY_REF_IS_INITIAL ...?
endmethod.
full reward points for answers.
Thanks & Regards,
Uday Kumar.
Edited by: UDAY on May 6, 2008 9:32 PM

Hi Uday,
Its occurs because you're trying to access a objects with null reference. Or you forgot to create an instance or an error occurs during the instance creation. So You should put all your "Procedures and business logic" inside a Try/catch block. as follow.
" Define a class exception object to get error message......
DATA o_exception TYPE REF TO cx_sy_ref_is_initial.
"// Use the statment Try block to catch the error.
TRY.
*   Creating the main iXML factory
l_ixml = cl_ixml=>create( ).
*   Creating a stream factory
l_streamfactory = l_ixml->create_stream_factory( ).
* create input stream
l_istream = l_streamfactory->create_istream_xstring( source ).
* initialize input document
l_document = l_ixml->create_document( ).
* Create a Parser
l_parser = l_ixml->create_parser( stream_factory = l_streamfactory
                                      istream        = l_istream
                                      document       = l_document ).
* parse input document
l_parser->parse( ).
*   Validate a document
l_parser->set_validating( mode = if_ixml_parser=>co_validate ).
*   Parse the stream
IF l_parser->parse( ) NE 0.
    IF l_parser->num_errors( ) NE 0.
      DATA: parseerror TYPE REF TO if_ixml_parse_error,
            str        TYPE string,
            i          TYPE i,
            count      TYPE i,
            index      TYPE i.
      count = l_parser->num_errors( ).
      WRITE: count, ' parse errors have occured:'.
      index = 0.
      WHILE index < count.
        parseerror = l_parser->get_error( index = index ).
        i = parseerror->get_line( ).
        WRITE: 'line: ', i.
        i = parseerror->get_column( ).
        WRITE: 'column: ', i.
        str = parseerror->get_reason( ).
        WRITE: str.
        index = index + 1.
      ENDWHILE.
    ENDIF.
ENDIF.
*   Process the document
IF l_parser->is_dom_generating( ) EQ 'X'.
    refresh : it_source.
    node ?= l_document.
    CHECK NOT node IS INITIAL.
*   create a node iterator
    iterator = node->create_iterator( ).
*   get current node
    node = iterator->get_next( ).
*   loop over all nodes
    WHILE NOT node IS INITIAL.
      CASE node->get_type( ).
        WHEN if_ixml_node=>co_node_element.
*         element node
          name    = node->get_name( ).
          nodemap = node->get_attributes( ).
        WHEN if_ixml_node=>co_node_text.
*         text node
          value = node->get_value( ).
          if name eq 'DT_WHSE'.
            wa_source-whse = value.
          ELSEIF name eq 'DT_DC'.
            wa_source-DC = value.
          ELSEIF name eq 'DT_PLANT'.
            wa_source-PLANT = value.
          ELSEIF name eq 'DT_QTY'.
            wa_source-QTY = value.
            COLLECT wa_source INto it_source.
            CLEAR   wa_source.
          ENDIF.
      endcase.
      node = iterator->get_next( ).
    endwhile.
ENDIF.
loop at it_source into wa_source .
    at first.
*       Creating a ixml factory
      o_ixml = cl_ixml=>create( ).
*       Creating the dom object model
      o_document = l_ixml->create_document( ).
    endat.
*       Build and Fill root node MT_DEMANDTEC_COST
    AT FIRST.
      l_element_MT_DEMANDTEC_COST    =
O_document->create_simple_element(
                              name   = 'MT_DEMANDTEC_COST'
                              parent = o_document ).
    ENDAT.
*      Build and Fill Child node DT_DEMANDTEC for parent
*                                                  MT_DEMANDTEC_COST
    l_element_DT_DEMANDTEC    = O_document->create_simple_element(
                                 name   = 'DT_DEMANDTEC'
                                 parent = l_element_MT_DEMANDTEC_COST ).
*      Build and Fill Child node1 DT_WHSE for parent DT_DEMANDTEC
    ivalue              = wa_source-WHSE.
    l_element_DT_WHSE    = O_document->create_simple_element(
                                     name   = 'DT_WHSE'
                                     VALUE = ivalue
                                     parent = l_element_DT_DEMANDTEC ).
*      Build and Fill Child node2 DT_WHSE for parent DT_DEMANDTEC
    ivalue              = wa_source-DC.
    l_element_DT_DC   = O_document->create_simple_element(
                                         name   = 'DT_DC'
                                          VALUE = ivalue
                                parent = l_element_DT_DEMANDTEC ).
*      Build and Fill Child node3 DT_WHSE for parent DT_DEMANDTEC
    ivalue              = wa_source-PLANT.
    l_element_DT_PLANT   = O_document->create_simple_element(
                                             name   = 'DT_PLANT'
                                              VALUE = ivalue
                               parent = l_element_DT_DEMANDTEC ).
*      Build and Fill Child node4 DT_QTY for parent DT_DEMANDTEC
    ivalue              = wa_source-QTY.
    l_element_DT_QTY     = O_document->create_simple_element(
                                             name   = 'DT_QTY'
                                              VALUE = ivalue
                               parent = l_element_DT_DEMANDTEC ).
endloop.
* render document ======================================================
* create output stream
o_istream = l_streamfactory->create_ostream_xstring( result ).
*   Connect internal XML table to stream factory
o_istream = l_streamfactory->create_ostream_itable( table =
l_xml_table ).
renderer = o_ixml->create_renderer( ostream = o_istream
                                          document = o_document ).
irc = renderer->render( ).
"   The Statement CATCH define a block that catches the exceptions of the
"   exception class cx_sy_ref_is_initial
    CATCH cx_sy_ref_is_initial INTO o_exception.
" If you need to get the error message text do as follow
DATA errorMsg type string.
" Get the message text
errorMsg = o_exception->GET_TEXT( ).
" Display the error information
MESSAGE errorMsg TYPE 'I'.
ENDTRY.
The TRY block defines a guarded area whose class-based exceptions can be caught in the subsequent CATCH blocks. If no exception occurs in the TRY block and it reaches its end, the system continues the processing after ENDTRY. If a class-based exception occurs in the TRY block, the system searches for an exception handler in the same or an external TRY control structure.
Font: SAP Help
You can see a how to create and use an exception in this example [ ABAP Objects - Defining a Class-based exceptions|https://wiki.sdn.sap.com/wiki/x/19w] .
Best Regards.
Marcelo Ramos

How to handle null values in RTF templates

Hi - I have two groups in a report for different SQL and two formulas for each group, CF_ELE_CNT and CF_ELE_CNT1. In the template I use the below code to print or not print a section.
<?if:number(CF_ELE_CNT +CF_ELE_CNT1) >0?>
The problem is when there is no data in the second group its not creating the XML tag for CF_ELE_CNT1, though CF_ELE_CNT has 13, it still does not print that partucular section. If I remove CF_ELE_CNT1 from the condition it works fine. I was wondering how to handle this.
Any help would be appreciated!!
Thanks,
Rav

Hey Rav,
You can add a check to identify it the element/tag is present or not
<?if:(CF_ELE_CNT1)?> will give true, if the element is present otherwise falsesince you are adding the two elements, you have to add a or condition.
<?if:(CF_ELE_CNT and number(CF_ELE_CNT) >0 ) or ( CF_ELE_CNT1 and CF_ELE_CNT1 >0)?>

How to handle file on application server without coading?

HI all,
can anybody tell me How to handle file on application server without coading? Is there any solution?
Thanks in advance.

> can anybody tell me How to handle file on application server without coading? Is there any solution?
what is that you want to handle. what you do if you don't code ...

Thoughts on how LabVIEW handles checkout of file from SCC when file already open

When you already have a file/project open in LabVIEW and it is set to read only because you haven't checked it out, you can go into SCC and do a checkout then save the file immediately. The issue with this is, if your local copy doesn't match the copy in SCC, you will probably be overwriting changes. Sometimes this is convenient because if you have ever edited a MS Word file and then gone to save and it won't let you because it was opened as read-only...then that sucks because you either lose your work, or have to do a copy of the entire word file->close the program->re-open as writable, then paste. This can be avoided with the "LabVIEW way", but the "MS Word" way seems much safer because it forces you to conscioiusly make the file writable (by either checking it out or manually write clicking and changing to writable) BEFORE opening it. I just wanted people's opinions on how LabVIEW handles this, and if there would be a better way.
CLA, LabVIEW Versions 2010-2013

VSS
CLA, LabVIEW Versions 2010-2013

How to handle password changes if we implement singlesignon between BO& BI7

Hi,
As we know ,we can implement single signon between BO and SAP BI 7, by importing roles and users through CMC and by selecting the option "Use Single signon during report refresh time".
My doubt here is, When we import roles from SAP and Auto import the users, is it only the SAP usernames that are stored in BO repository or both username and password. If second case holds true then how to handle/manage password change for a user who is already imported in BO sometime back?
Would the password changes be reflected automatically in BO?
Please guide me if you think that I'm thinking in a wrong direction.

Hi Naresh,
password changes are reflected automatically in BO. BO just forwards the data to the SAP side and it does the real authentification.
Regards,
Stratos
PS: Keep in mind that you cannot change the SAP password on the BO login screen if your SAP password has expired. You have to do this with the SAP client (SAP GUI)

How to handle rpc/encoded style messages using BizTalk?

I am integrating with a lot of services and one of our customers has a service with rpc/encoded style
I could consume and generate schema from their wsdl file via BizTalk consume WCF wizard.
Once I am trying to call the service with request message that generated from the schema, it is giving an error that can not desterilize the first element of the message.
No Deserializer found to deserialize a 'FieldName' using encoding style 'null'
I compared the stub xml request message from SaopUI and I noticed that the xml expecting the data type with the element like this .
<soapenv:Envelope xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:wsb="WSBanka">
<soapenv:Header/>
<soapenv:Body>
<wsb:bnkBorcsorgulama soapenv:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/">
<sozlesmeNo xsi:type="xsd:string">?</sozlesmeNo>
<bankaKodu xsi:type="xsd:string">?</bankaKodu>
<anahtar xsi:type="xsd:string">?</anahtar>
</wsb:bnkBorcsorgulama>
</soapenv:Body>
</soapenv:Envelope>
On the other hand, I got the request of the message from Fiddler using the BizTalk , and the generate xml of the BizTalk schema without the data type.
<soapenv:Envelope xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:wsb="WSBanka">
<soapenv:Header/>
<soapenv:Body>
<wsb:bnkBorcsorgulama>
<sozlesmeNo>?</sozlesmeNo>
<bankaKodu>?</bankaKodu>
<anahtar>?</anahtar>
</wsb:bnkBorcsorgulama>
</soapenv:Body>
</soapenv:Envelope>
In SoapUi, if I remove a datatype from the message, I will get same error from the BizTalk request.
I read some articles that rpc/encoded style are not supported but I am not sure and these articles are not clear.
I also read that it was supported with Soap adapter but now it is deprecated.
So, Is there any one has an experience in rpc/encoded style messages and how to handle these message in BizTalk or is there any work around to handle these messages?
Your inputs really appreciate it.
Thanks in advance,
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer

Hi,
Please refer to the document which might help you:
#RPC/Encoded Style
http://www.c-sharpcorner.com/UploadFile/martinkropp/DesigningInteroperableWebService11232005044847AM/DesigningInteroperableWebService.aspx

How to handle the OK button of the parameters prompt of a crystal report

Hi,
how to handle the OK button of the parameters prompt of a crystal report in vba.NET?
I want to use the parameter prompt from the crystal report itself and I want to know when the report is ready. I need to export programatically by sending email to a list of employees after the parameters has been set. The emails I send depends on the results of the report.
Im using a CrystalReportViewer control in VS2010 and Crystal Report for VS2010 v13.0.1.220.

Right. But the parameter screen is driven by the viewer. Unless you create your own parameter screen and pass the parameters to the report via code.
Another thing I am not sure about:
"Then by code I want to read all the employees id from the report and send email to them with specified pages of the report. (1 page per employee)"
How do you plan on reading the employee ID from the report? I am not aware of any API that will read a value in a report so that you can then decide what page to send to whom.
I think you're approaching this kinda backwards. A question to ask is; can you do what you are trying to do in code in the CR designer? If not, using APIs will not work either. I suspect your approach should be a report that uses an employee filter. Run the report for employee x, get the report populated with the data for that employee and email it. Repeat for employee x1, employee x2, etc.
- Ludek

Suggestions on how to handle "Hacked Skype Account...

I. User Can Still Access Account
Run a full anti-virus scan (and other security scans available in your computer). This may help to detect and remove any elements that the hacker may have used in gaining access to your account.
2. Immediately Change Your Password, preferably with something that is difficult to guess, and not related or totally different from the passwords you previously used.
3. If the hacker also changed your registered email address, changed it back to your own email address. Here is the link on how to change your registered email address;
https://support.skype.com/en/faq/FA96/How-do-I-change-my-email-address-or-add-another-email-address-...
4. Contact Skype to report the incident. They may be able to provide you with further explanation, clarification and helpful advice. Use the Subject Security & Privacy >> Identity theft / Account takeover.
https://support.skype.com/support_selection
5. You can also contact your bank to inform or alert them of the incident if there is a payment method registered in your Skype account.   They may also be able to provide you with additional suggestions, advice, or options.
II. User Can Not Access Account (Password Has Been Changed) – Registered Email Address Not Changed.
Run a full anti-virus scan (and other security scans available in your computer). This may help to detect and remove any elements that the hacker may have used in gaining access to your account.
2. Open the “Forgotten Your Password” page, then request for a new password to be sent to your registered email address;
https://login.skype.com/account/password-reset-request
3. Contact Skype to report the incident. They may be able to provide you with further explanation, clarification and helpful advice.   Select the subject Security & Privacy >> Identity theft / Account takeover.
https://support.skype.com/support_request
4. You can also contact your bank to inform or alert them of the incident if there is a payment method registered in your Skype account.   They may also be able to provide you with additional suggestions, advice, or options.
III. User Can Not Access Account (Password Has Been Changed) – Registered Email Address Has Also Been Changed.
Run a full anti-virus scan (and other security scans available in your computer). This may help to detect and remove any elements that the hacker may have used in gaining access to your account.
2. If your account has a billing or purchase history in the last 6 months, you can request for a new password without the need of your registered email address. just click the link below;
https://login.skype.com/account/password-automation
After acquiring a new password, you can proceed in changing the registered email address to your own email address;
  https://support.skype.com/en/faq/FA96/How-do-I-change-my-email-address-or-add-another-email-address-...
3. Contact Skype to report the incident. They may be able to provide you with further explanation, clarification and helpful advice. They will most likely ask you to provide some details in order for them to verify that you are the real account owner. Select subject/topic Security & Privacy >> Identity theft / Account takeover.
https://support.skype.com/support_request
4. You can also contact your bank to inform or alert them of the incident if there is a payment method registered in your Skype account.   They may also be able to provide you with additional suggestions, advice, or options.
5. If your account has no recent purchase, it may no longer be possible to retrieve your account.   Still you can try to contact Skype to know if you have other possible options.
Note: If for some reason the links to contact customer support don't work, you can also send an email to [email protected]
Useful Links
A. Protecting your Computer
http://www.skype.com/intl/en-gb/security/online-safety/#protecting
B. Skype Security - Protecting your online safety, security and privacy.
http://www.skype.com/intl/en/security/
C. What can I do if someone has taken over my account? (from support.skype.com)
https://support.skype.com/en-us/faq/FA10920/What-can-I-do-if-someone-has-taken-over-my-account;jsess...
D. How can I contact Skype Customer Service?
https://support.skype.com/en/faq/FA1170/How-can-I-contact-Skype-Customer-Service
CONTACT SKYPE CUSTOMER SERVICE   |  HOW TO RECORD SKYPE VIDEO CALLS  | HOW TO HANDLE SUPICIOUS CALLS AND MESSAGES   |  WINDOWS PROBLEMS TROUBLESHOOTING   |  SKYPE DOWNLOAD LINKS
MORE TIPS, TRICKS AND UPDATES AT
skypefordummies.blogspot.com

Skype is useless for this.
They will claim that you the user are responsible, and that they don't need to do anyhing.
So....
Do not allow Skype to autorefill your account when it runs low on balance, and do not store a creditcard, or other payment info with them.
Each user is liable for whatever the hackers can steal.
As this is from recent personal experience, I recommend you to never keep payment information on file with Skype.

How to handle dbms_xmldom with no data values.(no_data_found error in dom)

hi,
i have below block,
DECLARE
doc dbms_xmldom.DOMDocument;
node dbms_xmldom.DOMNode;
elem dbms_xmldom.DOMElement;
cur_node dbms_xmldom.DOMNode;
root_elem_data dbms_xmldom.DOMElement;
root_elem_tab dbms_xmldom.DOMElement;
root_node_data dbms_xmldom.DOMNode;
mode_elmn dbms_xmldom.DOMElement;
mode_node dbms_xmldom.DOMNode;
mode_text dbms_xmldom.DOMText;
doc1 DBMS_XMLDOM.DOMDOCUMENT;
root_node_data1 DBMS_XMLDOM.DOMNODE;
child_document DBMS_XMLDOM.DOMDOCUMENT;
child_rootnode DBMS_XMLDOM.DOMNODE;
V_CLOB CLOB;
v_doc CLOB;
v_EMP CLOB;
v_output_filename VARCHAR2(300) := 'SPOOL_DIR/'||'EMP_XML_FILE.xml';
l_xmltype XMLTYPE;
BEGIN
doc := dbms_xmldom.newDOMDocument;
node := dbms_xmldom.makeNode(doc);
dbms_xmldom.setversion(doc, '1.0');
dbms_xmldom.setCharset(doc, 'UTF8');
elem := dbms_xmldom.createElement(doc, 'PartnerInfo');
dbms_xmldom.setAttribute(elem,'xmlns','EMP');
cur_node := dbms_xmldom.appendChild(node, dbms_xmldom.makeNode(elem));
mode_elmn := dbms_xmldom.createElement(doc, 'EMPLOYEE');
mode_node := dbms_xmldom.appendChild(cur_node,dbms_xmldom.makeNode(mode_elmn));
BEGIN
SELECT value(e) INTO l_xmltype
FROM TABLE(XMLSequence(Cursor(SELECT * FROM EMP1 where EMPNO=7501))) e;
child_document := DBMS_XMLDOM.newDOMDocument(l_xmltype);
root_node_data1 := dbms_xmldom.importNode(doc,dbms_xmldom.makeNode(dbms_xmldom.getDocumentElement(child_document)),TRUE);
root_node_data1 := DBMS_XMLDOM.appendChild(root_node_data, root_node_data1);
EXCEPTION
WHEN OTHERS THEN
Dbms_Output.Put_Line('Error in SELECT stmt(UC_PARTNER_MS):::'||'error::'||SQLERRM);
END;
dbms_lob.createtemporary(v_doc, true);
dbms_xmldom.writeToClob(doc,v_doc,'UTF8');
v_EMP:= v_doc;
dbms_xmldom.writeToFile(DOC,v_output_filename,'UTF8');
dbms_xmldom.freeDocument(doc);
--Dbms_Output.Put_Line('THE OUTPUT IS::'||V_EMP);
EXCEPTION
WHEN OTHERS THEN
Dbms_Output.Put_Line('Error in SELECT stmt(UC_PARTNER_MS):::'||'error::'||SQLERRM);
END;
The xml file is 'EMP_XML_FILE.xml'
<empno>U++kYmcVuGchxbh+++++++++++++++1+</empno>
<empname>J</empname>
suppose the empno 7501 is not available in our emp table,
i got error
ORA-03113: end-of-file on communication channel
how to handle xmldom with no data values.
by
siva

hi,
please give the solution
by
siva

How to handle o.s. upgrades in a rac env?

Similar Messages

Maybe you are looking for