How to handle OAException message ?

Hi , I have requirement to split the OAException message before display. But OAException is not allowing to split as because it is of not string type.
The below is my code :
MessageToken tokens[] = new MessageToken[0];
OAException mainMessage = new OAException((String)oadbtransaction.getValue("oadberrorMsg"));
OADialogPage dialogPage = new OADialogPage(OAException.ERROR, mainMessage, null, "OA.jsp?page=/oaf/oracle/apps/ak/ecs/casting/webui/XXXXUploadPG", null);
pageContext.redirectToDialogPage(dialogPage);
output of mainMessage is :
oracle.apps.fnd.framework.OAException: No Data for Contract Number at row 1,No Data for Version Number at row 1,No Data for Serial Number at row 1,No Data for Site Name at row 1,
No Data for Model ID at row 1,
No Data for Forecast Version at row 1
I need to split at , and see that each split should come in new line. How to acheive this requirement. Any solution for this.
Thanks,
Raghav

Hi,
If you see my code , entire exception is coming a single line . I need to split at comma and show in new line.
I dont have the option of showing error as your code:
pageContext.putDialogMessage(new OAException("<Error1>",OAException.ERROR));
pageContext.putDialogMessage(new OAException("<Error2>",OAException.ERROR));
pageContext.putDialogMessage(new OAException("<Error3>",OAException.ERROR));
Thanks,
Raghav

Similar Messages

How To Handle Error Message In TCD Recording?

Hi All,
I tried recording a transaction (my own transaction) by not enterring value in an obligatory field. the error message came. but when i executed the script, it showed an error. but actualy, the error message was expected right? how to handle this situation? i tried with tcd and sapgui recording. both gave almot the same result.
i am including the script which i have written.
MESSAGE ( MSG_1 ).
*TCD ( ZCUST , ZCUST_1 , ECC ).
SAPGUI ( SAP_1 , ECC ).
ENDMESSAGE ( E_MSG_1 ).
v_mno = &tfill.
v_msg = E_MSG_1[v_mno]-msgtext.
v_mtp = E_MSG_1[v_mno]-msgtyp.
If Msg Type is E *** **** It Has To Be E ****
IF ( v_mtp = 'E' and v_msg = 'Account no AC02 does not exist EXIT = X').
logtext(0,'Passed').
ELSE.
log(v_mtp).
log(v_msg).
logtext(1,'Failed').
ENDIF.
End Of The Condition For Message Type E ******

I have recording messages using the TCD command.
My script (very simple):
MESSAGE ( MSG_2 ).
TCD ( ME21 , ME21_1 , R3 ).
ENDMESSAGE ( E_MSG_2 ).
In the MESSAGE command interface, I defined rules to allow several kind of messages.
Execution: 3 mesages found:
      * transform PR into PO
       MESSAGE     MSG_2 [1,009 sec]
         RULES MSG_2 = XML-DATA-01
        Message MODE EXIT TYPE ID    NR
        [1]      'A'         'I'   06    456
        [2]      'A'         'W'   'ME' 080
        [3]      'A'         'E'   'ZE' 029
         TCD    ME21                 [0,545 sec N] Target sys R3 -> ZDA010A219
        S06017 Standard PO created under the number 8201075606
           Tgt System Z_A219->R3->ZDA010A219 (ZDA 010 ... HP-UX ORACLE)
           CALL TRANSACTION ME21 ME21_1 XML-DATA-01
           03 MESSAGES FROM ME21 ME21_1 XML-DATA-01
           I 06 456 Release effected with release code 00001
           W ME 080 Delivery date: next workday is 02.05.2007
           S 06 017 Standard PO created under the number 8201075606
       ENDMESSAGE E_MSG_2 (&TFILL = 0)
As you can see, 3 messages are found but the &TFILL variable is still 0.
I guess (but cannot test yet) I would manage to record those messages using SAPGUI command.
Is there anything wrong with my script?
My SAP_BASIS component is in version 620. I'm not using the ultimate version of eCATT (no WEBDYNPRO command, etc.). Could it be an explanation?
Thank you in advance,
Olivier

How to handle error message during PAI?

Hi Experts,
Need help here.
In my dialog screen, I have a field which is typed 'QUAN'.
In entering different format , e.g. with non numeric value or a negative value, an error message appear and it does not process the MODULES inside the chain or FIELD MODULE ON REQUEST.
Does anyone knows how to handle this kind of error. I need to display into a separate screen the errors I encountered coz I'm creating a new RF transaction.
Points will be rewarded.
Thanks in advance.

Hai
in your case(RF case) it is other way...
yes you can use
field x_currency module check_currency.
in module check_currency.
you have to display errors in another screen say 200.
in that there will be 4 fields, all are display only fields.
X_MESSAGE-MSGV1 of type sy-msgv1
X_MESSAGE-MSGV2 of type sy-msgv2
X_MESSAGE-MSGV3 of type sy-msgv3
X_MESSAGE-MSGV4 of type sy-msgv4
you populate the messages with these fields and then display it in the screen.
method check_currency.
*--do all your checks here....
       if error
         clear x_message.
        x_message-msgv1 = 'Enter Valid Employee Number'(004).
        leave to screen 0200.
      endif.
    endif.
ENDMODULE.                 " VALIDATE_Currency
in screen 200 PBO you need to format the message
using the below logic.
       Method for formatting the message
method message_format.
    data : lt_text type table of tline,         "text table
           lx_text type tline.                  "work area
    refresh lt_text.
    clear lx_text.
    concatenate x_message-msgv1 x_message-msgv2 into lx_text-tdline
      separated by space.
    append lx_text to lt_text.
    clear lx_text.
    concatenate x_message-msgv3 x_message-msgv4 into lx_text-tdline
      separated by space.
    append lx_text to lt_text.
*- formatting the message
    call function 'FORMAT_TEXTLINES'
      exporting
        formatwidth = 20
      tables
        lines       = lt_text
      exceptions
        bound_error = 1
        others      = 2.
    clear: x_message.
*- transfer the message data to screen fields
    loop at lt_text into lx_text.
      if sy-tabix = 1.
        x_message-msgv1 = lx_text-tdline.
      elseif sy-tabix = 2.
        x_message-msgv2 = lx_text-tdline.
      elseif sy-tabix = 3.
        x_message-msgv3 = lx_text-tdline.
      elseif sy-tabix = 4.
        x_message-msgv4 = lx_text-tdline.
      else.
        exit.
      endif.
    endloop.
endmethod.                    "message_format
Regards
Vijay

How to handle parked message in BPM?

Hi,
I have a scenario that buyer as R3 send PO(same PO number) change idoc multiple times into bpm without receiving PO change confirmation(from seller, non R3) yet, I have a loop in bpm to handle this case, the loop checks the condition whether confirmation matches change request, if not, potential loop repeats. However, if I have multiple change request(same PO number) sent from R3 to BPM, my BPM waiting for my order confirmation, then if the first order confirmation comes into BPM matches with the first change request, then I exit the loop, but I still have several change requests parked at processXXXXX yet to be processed, does anybody came into similar situations? Any good suggestions or examples?
Thanks,
Maggie

Hi there,
I need to correlate ChangeConfirmation to ChangeRequest with PO number, this is for the purpose of ChangeRequest waiting for Confirmation for the same PO number. However, I don't know how to handle multiple changes come into BPM without confirmation yet, my current design is that I immediately enter a loop in BPM, with condition confirmation Info doese not match change info, thus the change request is bundled with bpm process, once the porcess is finished(response match change request), the queue of my other change requests(the parked ones) now got deleted, does anybody have any good suggestions in handling multiple change request(for same PO number) in bpm? Is there a way I can force bpm to handle one request one response, throw some error message if multiple changes comes together without response yet? Anybody had encountered similar issues?
Thanks,
Magge

How to handle error messages in BDC background mode

Hi experts,
I got one problem in BDC, We are uploading data throgh BDC program,that program is calling Standard Batch Input programs,
Now we got one requirement, i.e., In some special cases we have to send one message as a error message.I handled this in foreground but, how to handle this in background.

Hi,
if session is being used
automatically the log will begenereated in the sm35 transaction
but if call transaction is used
put all the error messages in the applicationserver using
open data set
and after the exectionof the program in the background
you have to run another progam which reads the data stroed inthe application server
that also with open data set only...
thanks & regards,
Venkatesh

How to handle xml message in proxy inbound processing?

Hi Experts,
I have a scenario that is SOAP Client====>XI===>ECC.
But i don't need to use the XI mapping,i skip mapping
in XI and use the generated proxy inbound processing.
Here is a message structure as below.
<commodityList>
■<commodity>
■■<detailNo>303303</detailNo>
■■<makerName>sony</makerName>
■■<ChargeInfoList>
■■■<productId>aaaa</productId>
■■■<name>bbb</name>
■■</ChargeInfoList>
■</commodity>
</commodityList>
When i sent the message without field entry of <productId>
and <name> i got the response in soap client as below.
<commodityList>
■<commodity>
■■<detailNo>303303</detailNo>
■■<makerName>sony</makerName>
■</commodity>
</commodityList>
The field tag <ChargeInfoList> doesn't display.
But i want it to display as below.
<commodityList>
■<commodity>
■■<detailNo>303303</detailNo>
■■<makerName>sony</makerName>
■■<ChargeInfoList>
■</commodity>
</commodityList>
In case of field entry is empty,how to let the response
contains tag?
As i know ,there is a CONTROLLER in proxy .
But i don't know if it is relevant to this
case and i don't know how to handle it.
Brand

Hi Mrudula,
As far as i know there are no content conversion methodology for HTTPS as the recevier adapter.
Also you can read through these links to confirm the same:
http://help.sap.com/saphelp_nw04/helpdata/en/0d/5ab43b274a960de10000000a114084/content.htm
http://publib.boulder.ibm.com/infocenter/wbihelp/v6rxmx/index.jsp?topic=/com.ibm.wbia_adapters.doc/doc/sap_xi/sapximst30.htm
SAP NetWeaver - XML Communication Interface (CA-XML) [original link is broken]
Regards,
abhy
note: reward the helpful.

How to handle HTTP Message Format

Hi All,
i have the interface like XML File(Supplier)--XI--HTTP Message Post(SRM Server)
How to handle this case and how to handle the HTTP Message formats, what Adapters and all i need to use here
Regards
Vamsi

check susma's reply
File to HTTP
File to HTTP
/people/kausik.medavarapu/blog/2005/12/29/csv-file-lookup-with-http-request-and-response-in-xi

How to handle the messages.

Hi,
I am doing interactive report. In that how to handle the error meesages.
Regards
Srinu

HI
IF YOU WANT HANDLE THE ERROE MESSAGES
*& Report ZNNR_REPORT
REPORT ZNNR_REPORT NO STANDARD PAGE HEADING <b>MESSAGE-ID ZNNR</b> LINE-SIZE 100 LINE-COUNT 65(4).
******DATA DECLARATIONS**********
DATA : BEGIN OF IT_PLANT OCCURS 0,
        MATNR LIKE MARA-MATNR,
        WERKS LIKE MARC-WERKS,
        PSTAT LIKE MARC-PSTAT,
        EKGRP LIKE MARC-EKGRP,
       END OF IT_PLANT.
DATA : BEGIN OF IT_PONO OCCURS 0,
        EBELN LIKE EKKO-EBELN,
        EBELP LIKE EKPO-EBELP,
        MATNR LIKE EKPO-MATNR,
        WERKS LIKE EKPO-WERKS,
        LGORT LIKE EKPO-LGORT,
       END OF IT_PONO.
TABLES EKKO.
********END OF DATA DECLARATIONS*********
********SELECTION SCREEN DESIGN ***********
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
PARAMETER : P_WERKS LIKE MARC-WERKS MODIF ID S1.
SELECT-OPTIONS : S_EBELN FOR EKKO-EBELN NO INTERVALS MODIF ID S2.
SELECTION-SCREEN END OF BLOCK B1.
SELECTION-SCREEN BEGIN OF BLOCK B2 WITH FRAME TITLE TEXT-004.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS : R1 RADIOBUTTON GROUP G1 DEFAULT 'X'.
SELECTION-SCREEN COMMENT 5(20) TEXT-002 FOR FIELD R1.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS : R2 RADIOBUTTON GROUP G1.
SELECTION-SCREEN COMMENT 5(20) TEXT-003 FOR FIELD R2.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK B2.
******END OF SELECTION SCREEN DESIGN****************
*********INITIALIZATION OF SELECTION SCREEN ELEMENTS.*****
INITIALIZATION.
P_WERKS = '1000'.
S_EBELN-LOW = '4500016926'.
S_EBELN-OPTION = 'EQ'.
S_EBELN-SIGN = 'I'.
APPEND S_EBELN.
CLEAR S_EBELN.
************END OF INITIALIZATION***********************
***********SCREEN MODIFICATIONS*******************
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
    IF R1 EQ 'X' AND SCREEN-GROUP1 EQ 'S2'.
      SCREEN-INPUT = 0.
      MODIFY SCREEN.
    ENDIF.
    IF R2 EQ 'X' AND SCREEN-GROUP1 EQ 'S1'.
      SCREEN-INPUT = 0.
      MODIFY SCREEN.
    ENDIF.
ENDLOOP.
********END OF SCREEN MODIFICATIONS*****************
***************SCREEN VALIDATIONS *****************
at selection-screen.
SELECT SINGLE *
           FROM EKKO
           INTO EKKO
           WHERE EBELN IN S_EBELN.
IF SY-SUBRC <> 0.
    SET CURSOR FIELD 'S_EBELN-LOW'.
    <b>MESSAGE E999 WITH TEXT-005</b>.
ENDIF.
********end of screen validation*****************
START-OF-SELECTION.
*set pf-status '100'.
IF R1 EQ 'X'.
    SELECT MATNR
           WERKS
           PSTAT
           EKGRP
       FROM MARC
       INTO TABLE IT_PLANT
       WHERE WERKS = P_WERKS.
    LOOP AT IT_PLANT.
      WRITE : SY-VLINE , 2 IT_PLANT-MATNR COLOR COL_KEY,
             21 SY-VLINE , 22 IT_PLANT-WERKS COLOR COL_KEY,
             27 SY-VLINE ,28 IT_PLANT-PSTAT COLOR COL_NORMAL,
             43 SY-VLINE ,44 IT_PLANT-EKGRP COLOR COL_NORMAL.
    ENDLOOP.
ENDIF.
IF R2 EQ 'X'.
    SELECT EBELN EBELP MATNR WERKS LGORT
           FROM EKPO
           INTO TABLE IT_PONO
           WHERE EBELN IN S_EBELN.
    LOOP AT IT_PONO.
      WRITE : SY-VLINE , 2 IT_PONO-EBELN COLOR COL_KEY,
             12 SY-VLINE , 13 IT_PONO-EBELP COLOR COL_KEY,
             18 SY-VLINE , 19 IT_PONO-MATNR COLOR COL_NORMAL,
             37 SY-VLINE , 38 IT_PONO-WERKS COLOR COL_NORMAL,
             44 SY-VLINE , 45 IT_PONO-LGORT COLOR COL_NORMAL, 49 SY-VLINE..
    ENDLOOP.
ENDIF.
TOP-OF-PAGE.
IF R1 EQ 'X'.
*ULINE AT /1(48).
    WRITE : SY-VLINE ,2 'MATERIAL NUMBER',
            21 SY-VLINE , 22 'PLANT',
            27 SY-VLINE , 28 'STATUS',
            43 SY-VLINE , 44 'GRUP', 48 SY-VLINE.
    ULINE AT /1(48).
ENDIF.
IF R2 EQ 'X'.
    WRITE : SY-VLINE , 2 'PO NUMBER',
           12 SY-VLINE, 13 'ITEM',
           18 SY-VLINE,19 'MATERIAL NUMBER',
           37 SY-VLINE, 38 'PLANT',
           44 SY-VLINE, 45 'GRUP',
           49 SY-VLINE.
    ULINE AT /1(50).
ENDIF.
END-OF-PAGE.
ULINE AT /1(50).
WRITE :/10 'PAGE NUMBER', SY-PAGNO.
WRITE THE CONDITION WHAT EVER YOU WANT TO CHECK AND IF THAT IS TRUE SY-SUBRC = 0 THEN NO MESS IF NE 0 THEN RAISE A ERROR MESSAGE LIKE ABOVE
REWARD IF USEFULL

How to handle different message types of EDIFACT in single input file.

Hi All,
Currently we have a requirement like we will be receiving the input with different messages in the same input file (eg: ORDERS and ORDRSP in the same file).
We have configured both the message types in the document definitions. One more thing is the versions of the messages are different.
When we pass the input we are getting the error.
The input looks like below,
UNB
UNG
UNH*ORDERS
UNT
UNE
UNG
UNH*ORDRSP
UNT
UNE
UNZ
Please assist us to overcome the error.
Thanks,
Ravindra.

Hi Prasanna,
Thanks for your reply.
I have created the agreements for both the messages still i'm getting the below error,
B2B-50037
B2B inbound message processing error
If i give the input as separate messages (i mean 2 input files). Its working fine.
Also let me know is there any configuration settings to handle multiple messages in a single input file.
Thanks,
Ravindra.

How to handle duplicate messages in J2SE File scenario

Hi,
Is there any way to handle processing of duplicate messages in J2SE File adapter scenario?
Here is the scenario ,
Steps :
1. Engine picks up a message and checks the size of it.
2. Before reaching the checking interval , the adapter(file) was terminated unfortunately.
3. J2SE engine was restarted.
4. Previous file was again picked up and sent as the first time with one msgID.
5. After sometime, same file was picked up with a new msgID
6. System gets only ONE configrmation that file has been successfully transfered.
So we find two messages containing the same file.
I have checked in J2SE doc, there is a parameter called "db.exactlyOnceErrorInPendingState" which is related to DB.
Is there any similar parameter to handle the duplicate messages in FIle Adapter scenarios of J2SE Engine.
Please help me in this regard as it seems to be a new thing in J2SE AE.
Regards,
Soorya.

Hi swarup,
But using OS command how can we rename /archive that file?
Module means any Custom Module or wat?
Following are the channel configurations used in File To File scenario.
File Sender :
version=30
mode=XMB2FILE
XI.httpPort=58201
XI.httpService=/test
XI.ReceiverAdapterForService=test_rcv
file.numberOfMessageTypes=1
XI.Interface=MI_test_out
XI.InterfaceNamespace=http://nestle.com/test
file.type=BIN
file.targetDir=/test_inb
file.targetFilename=unusedbutreq
file.writeMode=fromHeader.ext
file.createDir=0
file.nestleName=initial
file.writeMode=fromHeader.ext
file.nestleEXT=test
file.nestleFileOverwrite=False
File Receiver :
version=30
mode=FILE2XMB
XI.TargetURL=http://localhost:58201/test
XI.NestleTargetURL=http://localhost:58201/test
file.type=BIN
file.checkFileModificationInterval=300000
file.pollInterval=300
file.processingMode=archiveWithTimestamp
file.archiveDir=/test_out/arc
XI.QualityOfService=EO
file.numberOfMessageTypes=1
file.messageAttributes=name
XI.SenderService=test_snd
XI.Interface=MI_test_out
XI.InterfaceNamespace=http://nestle.com/test
XI.ReceiverService=test_rcv
file.nestleBadMsgDir=/test_out/bad
file.sourceDir=/test_out
file.sourceFilename=.
Do the needful help asap.
Regards,
Prakash.

How to handle EndDialog message when using Asynchronous Trigger Pattern?

I have Service A which sends a message to Service B when a update/delete/insert trigger fires. Service B dequeing logic looks like:
declare @messagebody xml
declare @messagetype nvarchar(256)
declare @cg uniqueidentifier
declare @ch uniqueidentifier
DECLARE @messages TABLE(messagetype nvarchar(256),messagebody xml)
begin try
begin transaction;
waitfor
receive top (1)
@cg = conversation_group_id,
@ch = conversation_handle,
@messagetype = message_type_name,
@messagebody = cast(message_body as xml)
from MyPolicyQueue
),TIMEOUT @receiveTimeoutMs
if @messagebody is not null
begin
insert into @messages values (@messagetype, @messagebody)
end
select * from @messages
end conversation @ch
commit
end try
ServiceB will end the conversation but afterwards, the queue now has an EndDialog message that never gets processed.
The intent is asynchronous handling of update messages with the trigger used as the event source. Service B closes the conversation but trigger does not (It would probably be a very bad thing if trigger blocked waiting for EndDialog message response).
How do you handle the EndDialog message in this scenario?
The code is based on this example.
scott

A common practice is to create an activated proc on the initiator queue to close the conversation loop after the target service does it's job. This activated proc simply ends the conversation upon receipt of an EndDialog message type. If
an unexpected message type is received (including Error), the proc can end the conversation with error and perhaps log the details to a table that can be monitored for exceptions.
See Rusanu's artice for a description of this pattern:
http://rusanu.com/2006/04/06/fire-and-forget-good-for-the-military-but-not-for-service-broker-conversations/
Dan Guzman, SQL Server MVP, http://www.dbdelta.com

How to handle warning message for the fields in tab merging , PERSONAS 2.0

Hi all,
Please advice me on the below issue.
In a transaction VA32 , I have merged the fields from one tab to another tab using tab caching.
when i try to change the value of a merged fields , it throws the warnings message. So it is continuously looping from one tab to another tab.
So i tried to use the additional editor concepts in tab caching as below.
Looping is stopped and throws warning message in the same tab.
All the changes are saved successfully only when the enter button is clicked once in the main screen, else the changes are not saved and my previous value remains.
Anybody have an idea on how we can use Additional actions in Tab caching concepts.
Thank you,
Arun

Hi Kranthi,
When i try to save the fields which i merged from different tab is not saving.
Please find the below details.
Green highlighted fields are custom fields which is merged from different screen like header or item overview screen. This is handled in script button.
Red highlighted fields are merged from different tab like shipping or sales using tab caching concept.
While changing the value of the fields which is merged from different tab , and press ENTER then it throws the Warning message if occurs.
After warning message, if i try to save using the script button for copying all the custom fields which is merged from different screen , pasted it to their respective screens and also saved.
Its working fine.
When i try to save it before pressing ENTER button then the respective changes had made in the merged fields from different tab are not reflected.
How we can handle this issue?
Thank you,
Arun

How to handle archives messages in Msgs waiting for Acknowledgement

Hi folks
If i have a async process in BPM whcih is having status set "Processed successfully" but the BPM has actually spawned a WAIT for a transport acknowledgment(from file adapter), how do I handle archving/deletion for this msg??
Any filter i set in SXMB_ADM will count in such msgs too..how do we work around the scenario?

Hi Sriram,
>>>The missing link here is the Adapter status is not considered by ccBPM in deciding the process status..
I think you're right I'd like to know a little bit more about this too
If you decide to post it as an OSS message please
update this thread so that we'll all know in the future:)
Thx in advance,
Regards,
michal

How to handle system messages neatly in ibot/dashboard reports

From time to time system based issues go wrong when running ibots based on dashboard reports - table missing etc
the error message system kicks in and inplace of a neat graph or report appears a huge system based error message with the sql used. This is not a good way to present reports to our execs. Is there a way of handling this neatly so the very technical large error can be replaced with a runtime generated message instead, something equivallent to the No Results message

Hey Vasanth,
How did u handle the dump messages?
Regards
Deepa.

How to handle Undelivered messages when the Target Application is down

Hi
in our scenario,
sapEccSystem>OuboundProxy>PI>ReceiverAdapter>ReceiverThirdPartyApplication
the known issue with the ReceiverThirdPartyApplication is, it gets down in frequent intervals, and automatically gets up and running, but we don't know at what times it will be down and when it will be up again.
in this asynch scenario, when the scenario gets triggered from source SAP system, and at that time, if the receiverAppl is up, it is working fine.
but when the scenario gets triggered from source SAP system and at that time if the receiverAppl is down, the message exchange gets failed
to address these kinds of issues,
1. is their any concept of Queuing or anything in PI, that can keep the messages in something like Queues and process them when the receiver application gets up., if yes how can configure them
Does PI act as Queuing server, so that it delivers the pending messages one ofter another, until they are all finally sent.
or
2.is there any retry mechanism, where can specify something like, the undelivered message needs to be resent after waiting for an hour.
thanks,
Madhu_1980

Hi, the number of retries and the retry interval are modifiable java system parameters of the [Service SAP XI Adapter: XI|http://help.sap.com/saphelp_nw04s/helpdata/en/29/22ee41c334c717e10000000a155106/content.htm], check section Properties Related to Outbound Processing. You can change these properties in NWA of PI under Configuration Management -> Infrastructure -> Java System Properties -> Services -> XPI Adapter: XI. The screen in the bottom with the heading Extended Details displays the adapter's service property.
I found these properties in oss Note 730870 - FAQ XI 3.0/ PI 7.0/ PI 7.1/ PI 7.11/ PI 7.2/ 7.3 RFC Adapter, under Q3, when doing research on another topic.
Regards, Martin

How to handle OAException message ?

Similar Messages

Maybe you are looking for