How to handle power managment features of Windows Vista

Hi guys
I searched a little bit in the Toshiba Technical Knowledge Base and found very interesting article about the power management features of Windows Vista.
*[How to handle power management features of Windows Vista|http://aps2.toshiba-tro.de/kb0/HTD84026Q0000R01.htm]*
The point is that you will not find a same Toshiba Power Saver tool on Vista like on the Windows XP notebooks and the power saver settings are a little bit hidden in the Vista Power Saver settings.
But you can also control the certain options like Cooling Method or Power Saving Mode.
I think this document could be interesting for some here in the forum!
Greetings to all!

Hi Jayjay
Thanks for posting this here in the forum.
Several days ago I searched for such further power option in Vista.
This document was really, really helpful for me.
Thanks again

Similar Messages

  • How Can I get v1.52 of "ThinkPad Power Management driver for Windows"?

    The subject says it all: How can I get v1.52 of the "ThinkPad Power Management driver for Windows Vista, XP, 2000, Me, 98 SE - ThinkPad" driver? Since installing v1.53 I've been experiencing screen issues (screen goes dark, and it's very hard to get the screen brightness back to normal) that seem to be tied to my T40p entering sleep mode / turning off the screen.
    I want to see if reverting back to v1.52 fixes these problems.
    Thanks,
    RocketDude
    RocketDude
    T400s 2801-CTO

    Nilst,
    Issue has been escalated however currently pending the team to fix it. Will update once I have news from them.
    *Non Lenovo employee*
    I have a Y2P (i5) ... Feel free to ping me if you want me to test some applications with your Y2P if you have the same model. I don't mind keep doing recovery on it if needed .... =)

  • Compatibility issue between your power management system and Windows 8.1

    I have purchased a new Lenovo Ideapad S410 and have this problem.
           Compatibility issue between your power management system and Windows
           It also gives a message "Your PC ran into a problem and needs to restart. We're just collecting some error info, and then we'll restart for you. (100% complete)
           If you'd like to know more, you can search online later for this error:
    VIDEO DXGKRNL FATAL ERROR
    Please help! My laptop is only 5 days old.

    What model do you have? Can you post your MTM or model name?
    Sometimes these messages are a false alarm.

  • Question on "How to Handle Inv management Scenarios in BW" docuemnt.

    Hi all,
    I read the document "How to Handle inventory management scenarios in BW" and I did not understood what a snapshot scenario is?  Can anyone tell me what is the difference between snapshop and non-cumulative scenario's.
    thanks,
    Sabrina.

    In a non-cumulative scenario the current stock of any day (or month) is not stored physically in the cube. Instead the stock values over time is calculated dynamically at query runtime by the BW OLAP engine, which basically derives the stock by summing up the periodic value changes (cumulative inflow and outflow of the non-cumulative key figure), which are stored in the cube (together with a so called stock marker used as the basis of the calclation).
    In the snapshot scenario the current stock of any month is calculated in a snapshot ODS and then loaded to a cube. This means that the the stock value is physically stored in the cube in an ordinary cumulative key figure.
    Since a non-cumulative cube store value changes and not the actual stock this means that performance might be bad if there are many value changes for each characteristic combination in a month (since the stock is calculated at runtime and many records must be processed to derive the stock). So in this case the snapshot scenario is better since no runtime calculations of the stock need to occur  and since only one record, containing the actual stock value will be stored in each month for each characteristic combination having a stock value.
    I think you would be better of with an example, but with this explanation in mind looking at the scenarios in the How to again might clarify things...
    Regards,
    Christian
    / Christian
    Message was edited by: Christian

  • How to handle inventory management scenario

    Hi All,
    In How to handle inventory management scenario whitepaper, I fail to understand the basic difference between 'Inventory Management with non-cumulative Key Figures' and 'Inventory Management with Snapshots'. Can anyone please explain me the basic difference.
    Thanks
    PB

    Hi Loic
    Can u please see if all the steps listed below are OK.
    While setting up  the IM Scenario
    I have jotted down the steps with valuable inputs from you  and paper 'How to Hanlde IM scenarios'
    Please find the steps below. Kindly review them and let me know in case I have got anything wrong or missed out on anything.
    1. Transfer Business Content Datasources 2LIS_03_BX , 2LIS_03_BF, AND 2LIS_03_UM in RSA5.
    2. Go to Transaction LBWE, Activate Datasources 2LIS_03_BF, AND 2LIS_03_UM.
    3. Go to Transaction MCB_ select SAP BW usage 'Standard' Radio button.
    4. Save it.
    5. Go to Transaction MCNB, enter name of run ‘Stock_init’. Enter Termination date in future. Enter Datasource as 2LIS_03_BX.
    6. Execute the initialisation.
    7. Entries can be found in SETUP Table MC03BFSETUP & MC03BFSETUP.
    8. Run SETUP for 2LIS_03_BF, AND 2LIS_03_UM using TCodes OLI1BW and OLIZBW respectively.
    9. Run the extraction for 2LIS_03_BX in BW.
    10. Compress the request with ‘No Marker Update’ NOT SET i.e. unticked or unchecked.
    11. Run the extraction for 2LIS_03_BF in BW.
    12. Compress the request with ‘No Marker Update’ SET i.e. ticked or checked.
    13. Run the extraction for 2LIS_03_UM in BW.
    14. Compress the request with ‘No Marker Update’ SET i.e. ticked or checked.
    Steps 1 and 2 shall be executed in Development and transported to production and step 3 onward should be carried out in Production itself with Posting Block.
    Thanks in advance.
    Regards
    PB

  • Power Management Driver for Windows 8.1 missing (G510)

    Hello,
    There is no lenovo power management driver for windows 8.1 listed in the support page. There is only a version for windows 8 available. I need that driver and i need to have it. My laptop is the G510. When will the new version of the software be released? It's a new laptop and it should be fully compatible. 
    Till then, will installing windows 8 version of the program cause problems?
    Thanks

    I will . Hope that Lenovo will do as needed. Anyone know a better way to be heard by Lenovo and get an answer for this issue?

  • T61 Power Management Driver for Windows 7 - where?

    I cannot find a released Power Management Driver for Windows 7 for the Thinkpad T61.
    I see a version 1.60 but it does not include Windows 7 for the T61.  And the only other one I have found is beta.
    As an aside, do I even need the Power Management Driver if I'm not going to use Power Manager?

    Right there in the T61 drivers and software dowload page:  "Support -> Download Drivers and Software -> enter T61"
    ThinkPad Power Management Driver
    README for ThinkPad Power Management Driver
    In the driver matrix, it's listed as for "ACPI Power Management" for Vista and lower - but is the same driver. The readme and download page include Win 7 if you dig a little deeper.  Maybe that's what is causing the confustion.
    [edit] Sorry, spoke too soon.  I dug a little deeper.  The readme doesn't list the T61 under WIn 7, only Vista.  OTOH, the download page for the T61 lists that driver for Win 7.  Anyone actually try it?
    Z.
    The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc.  The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • Idle power management features on processor disabled due to a firmware problem - after BIOS update

    Hi,
       I did a BIOS upgrade on my E20 - 4220-CTO to 5JKT55A and I started seeing these messages in my System Event log ->
    "Idle power management features on processor 0 in group 0 are disabled due to a firmware problem. Check with the computer manufacturer for updated firmware."
    "Idle power management features on processor 1 in group 0 are disabled due to a firmware problem. Check with the computer manufacturer for updated firmware."
    "Idle power management features on processor 2 in group 0 are disabled due to a firmware problem. Check with the computer manufacturer for updated firmware."
    "Idle power management features on processor 3 in group 0 are disabled due to a firmware problem. Check with the computer manufacturer for updated firmware."
    The messages occur on each reboot.
    I upgraded to the latest bios 5JKT56A and I get the same messages.
    I was not getting these error messages on BIOS level 5JKT47A(ship from lenovo with this level).
    I updated my BIOS as it was suggested on the lenovo site before doing the win7 SP1 update. Note - I got the error before and after the SP1 update so it's not related to SP1.
    I have not see any additional issues, just the messages in the event log on each boot.
    Any ideas?
    Thanks in Advance!

    5JKT58A is the current E20 BIOS.   have you tried it yet?
    http://support.lenovo.com/en_US/downloads/detail.page?&LegacyDocID=MIGR-74761
    ThinkStation C20
    ThinkPad X1C · X220 · X60T · s30 · 600

  • Compatibility issue between your power management system and Windows,

    Compatibility issue between your power management system and Windows, and my system is Lenovo ACPI-Compliant Virtual Power Controller.

    What model do you have? Can you post your MTM or model name?
    Sometimes these messages are a false alarm.

  • How does new Label Management feature works in Aruba Central?

    Q: How does new Label Management feature works in Aruba Central?
    A: Central provides a standard web-based interface that allows you to configure and monitor multiple Aruba Wi-Fi networks.  
    With as many as devices that central could manage, searching a specific device or set of devices becomes difficult. This is where "Label management" feature of Aruba Central helps out.
    With "Label Management", administrator can create various labels in advance and use them to assign it to different IAPs or Switches as required.  Once the labels are assigned, user can use the label string to search a device or group of devices in central.
    Follow these steps create various set of labels in "Label Management":
    Login to Aruba Central and click on "All Groups"
    In the left-menu, under "Maintenance" select "Label Management"
    Click on "Create Label" button and create as many labels you require as per the environment and ease of use.

    for rating . you need to enable rating from List options and choose if it's going to be 5 star or like 
    to add like button to each page in a publishing site you can use the below script 
    function LikePage() {
    var aContextObject = new SP.ClientContext.get_current();
    EnsureScriptFunc('reputation.js', 'Microsoft.Office.Server.ReputationModel.Reputation', function () {
    Microsoft.Office.Server.ReputationModel.
    Reputation.setLike(aContextObject, _spPageContextInfo.pageListId, _spPageContextInfo.pageItemId;, true);
    aContextObject.executeQueryAsync(
    function () {
    alert('you liked the page'); //here you can update the likes count of the page
    }, function (sender, args) {
    Hope that helps|Amr Fouad|MCTS,MCPD sharePoint 2010

  • How can I download itunes from my windows vista to my ipod original?

    How can I download itunes from my windows vista to my ipod classic?

    If you want to add songs from iTunes to the iPod, plug it into the computer, select the iPod in iTunes and click the tabs across top to select what you want on the iPod.

  • How to install Minisap 6.1 in Windows Vista?

    Helo gurus, how are you?
    Before i install windows vista, i need to know if is possible to install minisap 6.1 with windows vista. Anybody did the installation in windows vista? Are there patches for download or other configs to change??
    Anyone asked this before in the forum ( i did not find anything ), so, i am asking now, please help me. Thanks!
    If it is not possible, please, answer about others versions of minisap.
    4:08 PM
    Message was edited by:
            Rodrigo Paisante

    I've tried to install Minisap on Vista & get the following error when triggering "Start SAP ABAP Engine":
                  ERROR_ACCESS_DENIED: Access is denied.  [shmnt.c      2055]
    [Thr 980] *** ERROR => ShmCreate: Create (5,4096,1) failed [shmnt.c      469]
    [Thr 980] *** ERROR => [CreateOsShm] CreateFileMapping(5,4 KB) failed with Err=5
    If anyone knows how to fix this problem, please let me know!!!
    [email protected]
    (South Africa)

  • How to download flash player 11 on windows vista 64 bit ?

    how to download flash player 11 on windows vista 64 bit ?

    Just download it from http://get.adobe.com/flashplayer/ - the installer will automatically install both 32-bit and 64-bit players on a 64-bit system.
    [topic moved to Flash Player forum]

  • Power Management Issues with Windows 8.1 RTM on HP Elitebook 8560w

    Installed Windows 8.1 RTM on my HP Elitebook 8560w yesterday and am having the same problem as with Windows 8.1 Preview before - power management is not working correctly. The screen will dim real shortly and come right back after the set amount of minutes, but it does not turn off. Standby never occurs. I have the power managent plan set to "balanced", but neither plugged in or on battery do the set timers work. The only thing that works is manually pressing the power button to go into standby.
    Anybody else see this problem or is there a bug fix for this?

    Windows 8.1 is not an official release, and still a beta program and not officially supported.  Also, your EliteBook is a Business model.  Your future issues would be best answered on the HP Enterprise Business Community Forum
    Good luck!
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • Is there any way to override the Toshiba Power Management with the Windows Power Management???

    Have an older P25-S607 and would prefer more control over the power management.....that I can get with Windows....any suggestions?
    Solved!
    Go to Solution.

    Thanks for the obvious reminder   That was a duh moment.  It's easy to forget the simple sometimes when you get involved in troubleshooting when it's not something you do on a daily basis that's for sure.  The Toshiba controls have been fine for the life of the Toshiba laptops we have had, but I always felt they were a little limited on options IMHO. 
    In this instance I needed to utilize some of the added XP options as this laptop actually had the hinge 'sprung' a little and didn't "shut down" or hibernate when you closed the lid.....changed hubby's "normal procedure" for utilizing this "shop laptop" so he didn't overheat and fry the hard drive which is what I believe happened originally to the system that had been working fine until the hard drive was fried.  Changed it out, reloaded everything for him only to have the system need to be reformatted again within a week as windows took over.  As I was investigating causes I realized the malfunction.  Not sure of the how or why, but now have automated shut down backups if he forgets to shut down when he shuts the lid and walks away.   So far so good

Maybe you are looking for