How to handle Pricing error " Y " Inactive because of subseque

Hi,
ZSAA is Basic price condition type, it determineds the value through alter.cal type as 100.00 usd, but it shows as
ZSAA is "Inactive because of subsequent pricing".
In the pricing screen, if we select the condtion details of ZSAA,
the new screen branch out, in this under control data, we
have below fields, in this Inactive field automatically says
"Y" - Inactive because of subseque
Condition class,
Cal.type
Condi category
Condi.control
Condition origin
Inactive
Can any body tell me what is the issue? how to handle this erro

hi,
let me put it this way, ZSAA is deriving the value of 100 $ through alt calculation type based on a different condition, for example Z123.
the alternative cal type is doing some calculation based on the value fetched for Z123. Now there must be some other condition type in your pricing procedure which is more relevant to the sales transaction you are doing. Now obviously the price determined for ZSAA should no longer be applicable because you should not have two prices active at the same time for a given sales order.
Let me try explain further, for example if there is net price condition availble in your pricing procedure. ZSAA determined some value and is active, but as soon as you enter value for this net price condition say ZNET, the ZSAA condition becomes inactive. Because after net price you dont need calculate any furhter discounts.
Hope it helps.
regards,
Sadhu Kishore

Similar Messages

How to handle the #error in ssrs expression

hi
Please any one help me to resolve this #error ,
I have a calculated filed in that expression i given a if condition like below
data of column is coming like this 0 , 0.0
=IIF(Fields!Column1.Value=0,0,((Fields!Column2.Value - Fields!Column1.Value)/( Fields!Column1.Value)))
how to handle the #error
Please let me know any one

Hi deepuk23,
According to your description, when you use the IIF() function in the report you got some error,right?
The issue can be caused by the column1 and column2 have different datatype, I assumed that one is integer and another is float, when the Column1 is 0 or null, because IIF() function always evaluates both the true part and the false part, even
though it returns only one of them, it will throw out the error.
To resolve the issue, you should use a nested IIF() function to avoid the zero-divisor in any rate like below:
=IIF(Fields!Column1.Value=0,0,((Fields!Column2.Value - Fields!Column1.Value)/(IIF(Fields!Column1.Value=0,1,Fields!Column1.Value))))
For more information, please refer to this article:
FAQ: Why does the “Attempted to divide by zero” error still happen?
If you still have any problem, please feel free to ask.
Regards,
Vicky Liu
Vicky Liu
TechNet Community Support

How to handle the errors using RSRV tcode

Hi all,
Could any one give tell me how to handle the errors,(if possible give me some example errors)and correct the errors using RSRV tcode.
Thanks & Regards,
Aswini.

Hello Aswini,
For further details on RSRV go through the link:
http://help.sap.com/saphelp_nw04/helpdata/en/92/1d733b73a8f706e10000000a11402f/frameset.htm
Hope it helps
Cheers
SRS

How to handle transport errors????

Hi Gurus.
How to handle transport errors and create a workflow email to the owner of the transport from solution manager??

Solution manager does provide automatic e-mail notification when status changes or error occures.To answer your question when ever transport fails ..you can configure such way that a support message can create automatically and notify support team / respective person.
If you are not using any t-code do you have any thoughts where you can create transport request???? and are you using solution manager only for maintanence project or for implimentation project also????
Hope this helps you....
Praveen

Item Price Y Inactive because of subsequent price

Hello Experts,
I have a 2 pricing conditions with condition class "Price" (B) in the pricing procedure.
This resulted that the first condition type having control status as Y "Inactive because of subsequent price".
Only the second condition type is active.
Please confirm that there is no impact on posting to accounting.
The confirmation is greatly appreciated.
Thank you.
HJMY

I have a 2 pricing conditions with condition class "Price"
(B) in the pricing procedure.
Though already confirmation has been given that there wont be any effect, can you please let me know why you have maintained two pricing which seems to be illogical.
G. Lakshmipathi

Condition Inactive because of subsequent price.

Hi All,
During Sales Order Processing in pricing only the last condition is actived & get reflected in net price. All other conditions are shown inactive. When I check the Item-Conditon-Details on the Control Data (Inactive Field) the status is shown Y- Inactive because of subsequent price.
We have created variant confugiration for the material.
Can anyone guide me where I have made the mistake.
Thanks is advance

hi,
i dont think it is really a mistake when the system says a condition is inactive because of a subsequent one. Like for example in a sales order there is a PR00 list price and some discount conditions on it.
But the moment we supply the sales order with a Net price (PN00 condition type)value we dont the discounts also to go along with that. because net price is after considering everything. In such case the discount conditions become inactive because of a subsequent price.
In your case please check your pricing procedure if it has purposefully been configured that way.
regards
sadhu kishore

How to handle the errors in transformations

Hi
I am using SOA, JDev 10.1.3.3.
How to handle the exceptions in transformations.
If any thing goes wrong in transformation then how to handle that situation.
I am not getting any kind of instances like errored out..
Please help me out
Regards
Pavankumar

I think your issue is that your process is going into manual recovery.
In the console click on the tab BPEL processes. There is a link on the left for manual recovery. Do you see your processes there?
What happens if you put your transformation into a scope. The in that scope you have a catch All. In this catch All routine just do a terminate. This will error your process but you should see it appear in the console.
cheers
James

How to handle system errors in XI using BPM? please help!

Hi Experts,
I have a requirement where I have to handle system errors. For example when I am making RFC call using RFC adapter if the remote destination is down then I have create a understandable error message and store it in another SAP table.
How to handle it? I am using BPM. I can see that there is "Exceptions" in the send step. How to use this?
Thanks
Gopal

Hi Gopalkrishna,
In this case whenever you get Mapping Exception , you can raise an Exception with the help of BPM and you can send the status to the RFC. But with the help of BPM.
For a Simple case refer:
http://help.sap.com/saphelp_nw2004s/helpdata/en/33/4a773f12f14a18e10000000a114084/frameset.htm
If you want you can do it without a BPM
and throw an exception in case any of the values is missing:
have a look at this weblog on how to throw exceptions
in a nice way:
/people/alessandro.guarneri/blog/2006/01/26/throwing-smart-exceptions-in-xi-graphical-mapping
Also just go through <a href="/people/sap.user72/blog/2005/02/23/raising-exceptions-in-sap-xi-mapping Exceptions in SAP XI Mapping</a> and see if it helps you solve the problem.
Also go through these links:
http://help.sap.com/saphelp_nw04/helpdata/en/dc/6b7f2243d711d1893e0000e8323c4f/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/68/253239bd1fa74ee10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/cf/f2bbc8142c11d3b93a0000e8353423/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/5d/2166e6a91d11d188de0000e8216438/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/05/bb223905b61b0ae10000000a11402f/content.htm
Please do let know if it helped.
Regards,
Abhy

How to Handle the error message?

Hi,
Can any one help me in handling the error messages in application,
In my application, I am having 2 buttons, one is display button, and the other is reset button. When we enter wrong inputs, it prompts an error message and again we I click on reset button the application goes back to its normal stage i.e. the error message will be disappears. These things will happen in the same page. I have tryed to know the any Id/Name of error message.
So please help to handle error and skip that error then continue execute raming code.
Thanks
Buntty

A few problems with this question that need clarification:
You're using a GUI, but we have no way of knowing which one -- Swing? AWT? SWT? other?
You ask how to fix your program flow and logic but don't show us the current state. Most of us can't read minds so a bit of code would be nice here.
You mention "Page". What context is this in?
A great resource that has helped me and will probably help you is an article entitled [How To Ask Questions The Smart Way|http://www.catb.org/~esr/faqs/smart-questions.html] . It will tell you how to formulate your questions so that the folks here will be better able to answer them. Good luck.

How to handle write errors in non blocking sockets

Hi,
I'm using sockets registered with a Selector for read operations. I've seen code examples that put the SocketChannel in non blocking mode before registering it with the selector, and in fact not doing so would cause an IllegalBlockingModeException to be thrown.
My problem is that I can't handle write errors. The call to write() returns inmediately without throwing any exception. Even worse, when the network timeout expires the selector wakes up and I get an exception on read(). So I can't tell the difference between a real read error and a write error.
What can I do? Is there a magic method I haven't heard about?
Thanks

ejp wrote:
OK, so what happens is this: you write from your ByteBuffer; if there is room in the socket send buffer, the data is transferred and the transfer count is returned. (If there isn''t, the write returns zero and nothing has happened.) Your application code then continues. Meanwhile TCP is trying to send the data in the send buffer and get an ACK from the peer. If the peer is down as per your test, eventually those write attempts will time out. You will then get a connection reset exception on the next read or write.
Even worse, when the network timeout expires the selector wakes upCorrect, to tell you there is an error condition pending. This is good, not bad.You're right. This way my program can know that something happened.
But I still don't understand what the difference between a failed write() and a failed read() is. I mean, the error condition may appear during a send attempt, or it may appear after sending. In both cases I get an error when trying to read. How can my program know if data have been received by the other end?
Do I have to implement ACK messages in the application level protocol??? It'd be nice if TCP could do this for me...

How to handle the error handling..its urgent

hi guys...
how to handle the Exception using jsf. for example...in java program we try to connect the server...if server not connect then the exception occur like java.net.ConnectException.. i have to handle exception using jsf and display related error page...plz give me ur valuable words..its need is very urgent..
advance thanx and with regards
DJ

Hi,
1. create a new error bundle (myErrMsg) // copy from javax/faces/Messages.properties in jsf-impl.jar
2. declare this bundle in your faces-config
<application>
<message-bundle>bundle.MyErrMsg</message-bundle>
<locale-config>
<default-locale>en</default-locale>
<supported-locale>de</supported-locale>
<supported-locale>fr</supported-locale>
</locale-config>
</application>
3. handle the Exception in your backing bean
ResourceBundle bdle = ResourceBundle.getBundle("bundle.MyErrMsg",this.getLocale());
context.addMessage(clientId, new FacesMessage(severity, bdle.getString(key), null));
4. add the tag messages in your jsp
<h:messages layout="table" errorClass="TextError" infoClass="Text"/>

How to handle runtime error in PreUUT step when running in Parallel mode

I would like to run Test UUTS in parallel mode, and some actions are done in PreUUT such like read serial number and fixture control.
The process model won't goto PostUUT Step when runtime error occurs in PreUUT step, so i would like to add some actions to check if sequence error in cleanup and go back to setup in PreUUT step, but i find it skip all the actions in setup and main step?
What should i do if i want to go back to run PreUUT again as the first time to run when runtime error occurs?
Or, is there any good way to handle this kind of error withour restart program?
Solved!
Go to Solution.

This question does not depend on PreUUT or ParallelModel at all.
First of all:
A Runtime Error is a situation where TestStand encounters a problem which makes further testing either impossible or senseless. So a Runtime Error always indicates a situation where proceeding the test sequence is not recommended.
Nevertheless, there are situation where you want to handle those errors without stopping the execution. A "traditional example" for this is initialising serial/GPIB devices. If the device does not reply, there might be different issues the operator can easily resolve and (if corrected) the sequence can proceed properly. The operators action could be:
- Check if device is switched on
- Check connection between PC and device
So the error state is used to inform the operator about the malfunctioning device and regarding of the actions the operator takes, the execution will either proceed or terminate.
When TestStand encounters a Runtime Error, it initially reacts with displaying a dialog. This behavior can be modified in the Station Options >> Preferences >> On Runtime Error.
Furthermore, you can install callback sequences which are called if an error occurs. Those would be either SequenceFilePostStepRuntimeError or ProcessModelPostStepRuntimeError (depending on the fact if you are changing the process model or simply working with client sequence file callback overrides). These are "normal" sequences you can use in order to get system information, loop on the step or....essentially do whatever you want. If you want to proceed though, you must not forget to reset the error flag.
hope this helps,
Norbert
CEO: What exactly is stopping us from doing this?
Expert: Geometry
Marketing Manager: Just ignore it.

How to handle the error stag(error DTP)

Hi Friends, i got some records in the error stag while loading data from Dayta source to Master data target and this is in the production. we didn't created the Error DTP in the production. How to delete the error reocrds from the error stag if we dont want to update it to the target.And the request is showing in yellow due to that iam not able to delete the dtp request from the target.
any help...to proceed with this error.
thanks in advance.

HI
You are not able to delete the DTP from target?
Change the request to RED
Double clicking on theTrafic signal... then manually change the request to RED and Then you will be able to delete it.
Hope this help...
Dev

How to handle ADF_FACES Errors/Exceptions and display customized message.

Hi All,
My question here is, 
Is there any way to handle the validation/PPR kind of run time exceptions/errors. I have tried to handle these errors by extending the lifecycle and overridden the reportErrors method. But this method is being called in the PREPARE_RENDER phase. But the exception is happening in the JSF_PROCESS_VALIDATIONS phase. I have tried to handle the exceptions in the custom PagePhaseListener. But these exceptions could not be handled in the custom PagePhaseListener.
I would like to display a customized message to the user instead of displaying the PPR exception.
The details are given below.
I have a use case related to the security like if there is a drop down list in a page. Drop down list is having a af:validateRegExp component which allows only alphabets. Dropdown is populating alphanumeric values.
One option is selected in the drop down list and submitted the value with the help of the commondbutton.
With the help of some tools, we modified the submitted value(index of the list submitted) to some alphabets.
Its throwing some validation exception. Some of the statements are given below.
<UIXRegion> <_warn> Error processing viewId: /Validate_TF/validate URI: /validate.jsff actual-URI: /validate.jsff.
java.lang.NumberFormatException: ADF_FACES-60034:SelectOne could not convert index 0asd
<LifecycleImpl> <_handleException> ADF_FACES-60098:Faces lifecycle receives unhandled exceptions in phase PROCESS_VALIDATIONS 3
<RegistrationConfigurator> <handleError> ADF_FACES-60096:Server Exception during PPR
displaying a popup dialog with error message like:
ADF_FACES_60034:could not convert index
ADF_FACES_60097:server exception
ADF_FACES_60096: some exception occurred during PPR,
I don't want to show these kind of messages to user. Please suggest me whether is it possible or not.
Thanks in advance.
Regards,
SatishRaj Dasari.

Hi,
Try reading one of Franks post :
[url https://blogs.oracle.com/jdevotnharvest/entry/extending_the_adf_controller_exception_handler]
Nigel

How OC4J handles fatal error codes

1. Does OC4j cleans/closes all connections in the connection pool when OC4J detects fatal error codes? Does OC4J really work as per oracle documentation? Can I get an example showing how is it done?
Oracle Documentation says:
For each data source defined in data-sources.xml, you can define fatal error codes that indicate that the back-end database with which the data source communicates is no longer accessible. When OC4J detects one of these error codes (stated when a SQLException is thrown by the JDBC driver), OC4J will clean its connection pool. That is, it closes all connections in the connection pool. For Oracle, the predefined fatal error codes are: 3113, 3114, 1033, 1034, 1089, and 1090.
2. When OC4J detects fatal error codes defined in an connection pool in data-sources.xml, how connections in the connection pool are handled by OC4J?
3. When OC4J detects fatal error codes on one connection to Oracle database, then will OC4J restore / close the connection back to connection pool?
4. Does OC4J really work on fatal error codes?
Sample code of connection pool I used in data-sources.xml file where I defined fatal error codes:
<connection-pool name="FSCMDS" inactivity-timeout="30" initial-limit="5" max-connections="5" validate-connection-statement="select * from dual">
<connection-factory factory-class="oracle.jdbc.pool.OracleDataSource" user="" password="" url="" commit-record-table-name="">
<proxy-interface sql-object="PreparedStatement" interface="oracle.jdbc.OraclePreparedStatement"/>
<*fatal-error-codes*>
<*error-code code="3113"*/>
</*fatal-error-codes*>
</connection-factory>
</connection-pool>
Please post answers on these questions...
Thanks
Venkat

This forum is for general database questions, post your question here:
OC4J
Werner

How to handle Pricing error " Y " Inactive because of subseque

Similar Messages

Maybe you are looking for