How to Handle Returns of Vendor Consigned Stock Issued via Delivery ?

Hi.
I am currently able to issue Vendor Consigned Stock via Delivery. I use Lean Warehouse Management, and I have implemented Stock Determination Rule to take Vendor Consigned Stock and Unrestricted own stock in account during Issue. I am even able to insert the correct Vendor Number during the confirmation of the Transfer Order. When I generate the Goods Issue of the Delivery Order, I get an accounting document that affects both the Account Payable Liability and a Consumption Account.
Now My Question is this :
How do I handle Customer Complaints that lead to a Return of the Goods, back into Vendor Consigned Stock ? The goods that is returned, needs to be taken back into Vendor-Consigned Status, and a appropriate Accounting Document needs to be generated to reverse out the Acct Payable Liability and Consumption Account entries.
Do I use a Returns 'RE' Sales Order to bring back the Stock ? I need to be able to create a Return Delivery that will immediately post the returned Stock back into Vendor Consigned Status. So where and how can I key in the vendor number in the Return delivery, keeping in mind Return Delivery in Standard SAP does not use Warehouse Management ?
regards
Peo

Hi Edmund
I think you can try the following:
1. Define a new schedule line category - here you can define the movement type and the item category (as given in a Purchase Info Record). - Transaction VOV6
2. Define a new sales order type for returns. - Transaction VOV8
3. Define a new item category for the returns document, - you can mention the special stock type here too
4. Carry out the sales order to item category and item category to schedule line category assignments.
I am not sure if the system will prompt you to provide the vendor number or how does it populate the vendor no. while posting the material doc. However you can try this out and check if this solves your issue.
Reward points if you find this helpful

Similar Messages

Movement type to return unutilized Vendor Consignment Stock

What is the movement type to return unutilized Vendor Consignment Stock, which
was planned to use against a production order and moved to unrestricted stock

aprasada722 wrote:
What is the movement type to return unutilized Vendor Consignment Stock, which
> was planned to use against a production order and moved to unrestricted stock
If the stock is the same status as it was when issued to the vendor I would check MB51 for the material document that posted the stock to there location find the movement type that was used and then use the reversal movement type for that same movement type. (all SAP movement types have a reversal movement type for stock with same properties)

Stock take for sales returns and vendor consignment

Dear Gurus,
Can you help which T-code to use to create physical inventory document (batch input) for sales returned stocks (status: returns) and vendor consignment stock?
I have been searching the posts here but looks like not able to found similar post...
Many thanks,
Trang

there is no special t code.
use MI01.

Vendor return process for consignment stock not yet own by you

Hello guru,
I need some help from you on the following type of vendor return.
We receive vendor consignment goods into our warehouse and we notice we would like to return back to the vendor after several defects
defect were spotted few month later, how to execute vendor return like this given that the stock still own by the vendor
in accounting perspective?
Should I just create another PO and flag the return indicator and perform a movement 161 in MIGO? Is this method workable way
of doing this?
What if we need a delivery document to be generated after 161 movements is posted in MIGO?
Appreciate it.
Tuff

Hi,
   The vendor consignment stock has no accounting impact till the stock is issued to own stock or consumed (411K or 201K movement).
   Standard SAP recommends to use direct return delivery using 122 movement in MIGO to return the consignment stock material back to vendor.
   If you still wanted to proceed with return PO, then maintain the message ME640 as warning message (W) in the path: OLME - Environment Data - Define Attributes of System Messages - System messages. Now, create a return PO and create GR against the return PO.
   If you want proceed with SD route for returning to vendor, refer the thread: Return PO with Text material shipping tab
Regards,
AKPT

How to adjust vendor consignment stock

Hello
We have one material , that material is having one scheduling agreement (consignment), in 2003 he was received 3600 qty, that is shown in Purchase order history of Scheduling agreement, with 101 movement type and material document.
when we saw now the stock in MMBE the 1800 qty is showing as vendor consignment.
Now user says that, he has no any vendor consignment stock physicaly. now it is showing as 1800 qty vendor consignment.
I have checked in MB51 there is no documents from 2003 it is showing only 2004 onwards
if i suppose willing to scrapp then we need to take it as Unresticted stock, then Accounting document generates.
if i want to cancel old material document , then this document is not exist of 2003
How to remove the Vendor consignment stock? now
sap

Hi,
They has not been done tranfer posting consignment to own(411k) and issues.Thats y stock is still avilabe.So user have to do these things in sap.
If you want to do stock is nil without these things do Physical inventory but it is not advisable.
Regards,
Murali

How to Write Off Vendor Consignment Stock

Hi Guys
I was wondering if anyone could help me with an issue we have with Vendor Consignment Stock. There is a situation where there is stock sitting in Vendor Consignment Stock which is damaged and thus not returnable. This stock is thrown away into waste bins. I would like to know if anyone has ideas in terms of eliminating the stock from SAP without returning it to the Vendor and without causing financial postings in the business.
Many Thanks
Brett

Hi Brett,
Once the stock is damaged and not returnable , u are liable to pay to the vendor .
Therefore ur requirement cannot be fulfilled without FI postings.
Only solution would to take as consumped stock or unrestricted stock and then scrap it.
Note : FI document will be generated.
Regards
Ramesh Ch

Vendor consignment stock return for Sales order

Hi,
For Home delivery Sales order- Sale is being performed from Vendor consignment stock & it works good with 601K movement .For Return in this case, Return sales order is created & PGR is performed against delivery.While doing this - the returned consignment material goes to unrestricted blocked stock. But we need this to go back to Consignment stock.
Can any one suggest a solution on this ?
Thanks in advance for quick solution, sharing your inputs
Krish

Hi,
You can always use the 412 K mvt to do a manual posting back into consignment stock.
Regards,
MdZ

Vendor Consignment stock or vendor managed stock

Dear All,
My client wants to manage vendor consignment stock.
Vendor will be given a area and vendor will keep the stock in his area. Based on the plan he will supply the stock.
the GR for rawmaterials will be made on the consumption report given by the production person. This activity will happen next day only. i will do the GR only to the quantity consumed.
for example if i consumed 100 qty, i will do GR only for 100 and vendor will issue invoice for 100. But when the vendor issue the stock, he will raise a excise invoice based on which i have to take excise credit. I want to know how to do the same.
secondly, i take credit for 100 qty, but actual consumption is 95 only, how do i reverse the 5 only excise invoice.
regards
ranga

No, it is possible to sell from vendor consignment stock directly and I have done it in ECC 6.0 (not IS-retail).
- Pls refer the note 607604.
- Establish the 'stock determination rule' in MM -> Inventory Management -> Stock Determination.
- You need to assign it to the material (MRP3 view) or assign it to item-ategory.
- DONOT mark the special stock indicator in item-category used in SD (e.g. TAN) with 'K'..I did this mistake and wasted some time. If you do, it will ask you to populate the Vendor field in the Delivery which is not available and you may get stuck up because of that.
This should make it work.
Pls award points if you find this information useful.
Regards,
Shripad

Customer consignment from vendor consignment stocks

Hello Experts,
I am working on the below scenario,
The stocks in vendor consignment are used for customer consignment. I believe in standard we need to bring the vendor consignment stocks to company's unrestriced to do the post goods issue. Is there any work around for this solution so that the visibility of stocks still be on vendor consignment ? If so how would the posting when material document is created? Remember that, only after the customer consumes it, I will raise a PO and GR to bring to my own stock and then bill the customer.
Any thoughts?
Thanks,
Suhail Shaik

Hi,
The difference here is the stocks are already lying as vendor consignment stocks in our location and We are using it for customer consignment. Vendor doesnt supply to the customer directly.
Thanks,
Suhail Shaik

About goods issue from vendor consignment stock

Hi, I meet some issue needs your help!
The outbound delivery needs to post goods issue from vendor consigment stock directly. then how to choose which vendor's
stock for this delivery base on the actual process?
thanks
Best Regards,
Rory

Hi
In R3 it is not possible
If say material X is 100 units lies in your premises the vendor consignment stocks (the vendor property lying in your premises ) and out of that 100 units if you are making a sales order and then a goods issue means it is not possible
To sell that material you need to make it your own stock ( that is transfer from vendor consignment to your own ) as good as buying that stocks and then sell it
But the same scenario is possible in IS retail
For this iS retail server is reqd
In Retail you can play with vendor consignment stocks as much as possible without making our own stocks
You can search SAP library regarding the settings of the same
http://help.sap.com/erp2005_ehp_04/helpdata/en/c6/af3c415e5dde2be10000000a1550b0/frameset.htm
Regards
Raja

Returns from vendor special stock O

Hi, all.
Does anyone know, how can I make a returns from vendor, special stock O?
Thanks in advance.
HAL

Hi, Vivek.
I can not do MB04, because I don´t know always de PO that originates the stock "O" and this movement creates a FI document, with isn´t correct, because the 541O (that puts stock in vendor) does not create a FI document.
Any other idea? I mus say that I have WM, so I need to create an transfer order to store that sock in my warehouse.
HAL

Sales from vendor consignement stock

Is it possible to configure sales item catogory and schedule line to automatic withdraw stock from vendor consignement stock?
I will assume that the special stock vendor consignement must be assigned to the item category, but there are no standard item categories in standard SAP with this special stock vendor consignement.
Which movement type in the sales delivery should be used for this ?
Please help with some input on how to configure this scenarioe.
Best regards,
Terje

Hi Paul
Check for movement type 601 , wheather item category K and special stock K are maintained or not. I suppose for movement type 601 item category K and special stock K are not supported and that is the reason you are facing the error
Regards
Srinath

Goods Issue in SD delivery (from vendor consignment stock)

Hi, all.
I'm trying to make a goods issue in SD delivery from a vendor consignment stock (movement 601K), but the system gives me an error message M7071 - I have to enter a vendor at item level, but where? And if I have a stock determination strategie, why the system needs the vendor, if I have stock K available for a vendor?
Please advise.
Thanks,
HA

Hi Helena Maria,
I think you have made some mistake in the movement types in the consignment processes..
just go through this and its easy to remember...
<b>Please reward if this is useful for you..</b>
1. Consignment fill up:
Sales document type is KB
Item category KBN
schedule line category 1
In this step, you are not invoicing the customer. document flow is sales order -
delivery item category. It will not be relevant for billing and pricing because you are not charging money for these goods in this step.
In schedule line category, you will set movement type 631 & set for availability check and TOR.
2. Consignment Issue.
Once the customer informed you that he used all the goods or partial goods then you will create consignment issue for used goods.
Sales document: KE
Item category: KEN
schedule line category: C0 or C1
Here you are invoicing the customer(because he used the goods). you are assigning the delivery document and billing document to the sales document.
In item category, you are setting relevant for billing, pricing, special stock.
In schedule line category, your setting is 633 movement type, relevant for availability check & TOR.
3. Consignment Return:
Customer found that some goods are damaged or he not able to sold the goods he want to send it back. that you are creating this document.
Sales document type: KR
Item category: KRN
You will assign delivery document and billing to sales document. you will create return order, return delivery, return billing.
Your setting item category relevant for billing, returns, pricing, special stock.
Your setting schedule line item category: 634 movement type, NO availability NO TOR.
4. Consignment Pick up:
Even if you create the consignment return the goods are not come to direct to your plant. For that you need to create consignment pick up. here the owner ship is not changing so you do not need to create billing.
Assign return delivery to sales document type.
Sales document: KA
Item category: KAN

Request for help on Vendor Consignment stock and Customer Consignment Stock

HI Experts,
We have a requirement to segregate the Customer Consignment stock and Vendor consignment stock from the total Consignment stock available in the BW report.
Currently in the report the calculation of total consignment stock is based up on Issued consignment stock and Received consignment stock .
The calculations of the Issued and Received consignments stocks are specified below.
Issued consignment Stock
The below following parameters are checked when the quantity is considered as Issued consignment Stock
Transaction or Process keys : 100, 101, 104, 105, 106, 110
Application    :   MM
Stock relevance : 1
Adding to the above conditions,
u2022     When the stock category is u2018Ku2019, the Quantity in Base Unit of Measure is assigned to Issued Consignment Stock. or
u2022     When the stock category is blank and the stock type is u2018Eu2019 or u2018Ku2019 or u2018Lu2019 then also the Quantity in Base Unit of Measure is assigned to Issued Consignment Stock.
Received Consignment Stock :
The below following parameters are checked when the quantity is considered as Issued consignment Stock
Transaction or Process keys : 000, 001, 004, 005, 006, 010
Application    :   MM
Stock relevance : 1
Adding to the above conditions,
u2022     When the stock category is u2018Ku2019, the Quantity in Base Unit of Measure is assigned to Received Consignment Stock. or
u2022     When the stock category is blank and the stock type is u2018Eu2019 or u2018Ku2019 or u2018Lu2019 then also the Quantity in Base Unit of Measure is assigned to Received Consignment Stock
Only stock category and stock type are available in the BW report for determining the type of consignment stock . So, with respect to stock category and stock type, could you please kindly advise if it is possible to determine the Customer consignment stock and Vendor consignment stock in the report
Thanks a lot
Warm Regards,
Jeswanth
Edited by: jeswanth kadali on Jun 23, 2009 4:10 PM

Hi,
We can settle consignment goods to vendor through MRKO transaction.Even user transafers consignment stock to own stock through MB1B transaction.We can use same document to settle vendor through MRKO transaction.
What is implications of such Action (like Goods issue, 1 step transfer) on SAP.
Nothing will happpen after after stock converted to own stock.
Regards,
JS

T-code WV31 create physical inventory for vendor consignment stock

Hi all,
I have some issue with T-code WV31i n Sap Retail. Even though it supposed to create physical inventory doc for unrestricted use stock, it also create physical inventory Docs for special stocks (vendor consignment stock). What could be the reason?
Best regards
Sameera
Edited by: Sameera on Dec 23, 2011 7:07 AM

Hi,
If i do physical inventory for 2 quantity.
1. Consignment Payables account debited with 2 qty ( Now stock becomes 4 nos)
If i issue 4 quantity
2. Consignment Payables account credited with 4 qty.
If i do consignment settelment, it is setteling 4-2 (for 2 quantity).
But I want to settele for 4 quantity.
Thanks,
Maruthi

How to Handle Returns of Vendor Consigned Stock Issued via Delivery ?

Similar Messages

Maybe you are looking for