How to handle table control in BDC while uploading item details for anorder

How to handle table control in BDC while uploading item details for an order?
What is the use of CTU_PARAMS structure in BDC?
In Finance I have done some changes to the layout set by coping to a zscript(duning letter) and how can assign the print program?
What is the process to test the finance script?
How can I see the print preview whether it is coming correctly or not?
Thanks in advance.
Regards.
Abhilash.

hi,
for the bdc control refer the following link:
http://www.sap-img.com/abap/bdc-example-using-table-control-in-bdc.htm
ctu_params:
refer to the link
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/abap/dataTransfers-LSMW%2CALE%2C+BDC
reward if useful,
thanks and regards

Similar Messages

How to handle Table control in BDC? Difference between BDC & LSMW?

Hi
How to handle Table control in BDC? Difference between BDC & LSMW?
Regards,
Raghu

Hi ,
the diff b/w normal BDC and with table control is that with table control u can enter as many lineitems as u want..so during recording if u r entering 3 line items..then the program will show (1), (2) and (3) with that.
chane that fixed no to variable.
check that sample code.
in this for new customer...any no of items can be entered.
LOOP AT t_cusdata.
    REFRESH t_bdcdata.
    ON CHANGE OF t_cusdata-kunnr.
initial screen.
      PERFORM bdc_dynpro      USING 'SAPMV10A' '0100'.
      PERFORM bdc_field       USING 'BDC_CURSOR'
                              'MV10A-VTWEG'.
      PERFORM bdc_field       USING 'BDC_OKCODE'
                              '/00'.
      PERFORM bdc_field       USING 'MV10A-KUNNR'
                              t_cusdata-kunnr.
      PERFORM bdc_field      USING 'MV10A-VKORG'
                              t_cusdata-vkorg.     "'HCL'.
      PERFORM bdc_field       USING 'MV10A-VTWEG'
                              t_cusdata-vtweg.     "'HL'.
      DATA: fnam(20) TYPE c,
            fnam1(20) TYPE c,
            idx(2) TYPE c.
      MOVE 1 TO idx.
      LOOP AT t_matdata WHERE kunnr = t_cusdata-kunnr.
        PERFORM bdc_dynpro      USING 'SAPMV10A' '0200'.
        CONCATENATE 'MV10A-KDMAT(' idx ')' INTO fnam.
        PERFORM bdc_field       USING 'BDC_CURSOR'
                                      fnam.
        PERFORM bdc_field       USING 'BDC_OKCODE'
                                       '/00'.
        CONCATENATE 'MV10A-MATNR(' idx ')' INTO fnam1.
        PERFORM bdc_field       USING fnam1
                                      t_matdata-matnr.      "'FIN50'.
        PERFORM bdc_field       USING fnam
                                      t_matdata-kdmat. "'ABCD'.
        idx = idx + 1.
      ENDLOOP.
      PERFORM bdc_dynpro      USING 'SAPMV10A' '0200'.
      PERFORM bdc_field       USING 'BDC_CURSOR'
                              'MV10A-MATNR(01)'.
      PERFORM bdc_field       USING 'BDC_OKCODE'
                              '=SICH'.
      CALL TRANSACTION 'VD51' USING t_bdcdata MODE 'A' .
                                    UPDATE 'S' MESSAGES INTO t_err_mes.
Regards,
Sonika

Hi abapers how to handle table control in bdc

hi experts please guide me
how to handle table control in bdc? could u please explain me briefly
thanks and regards

sayeed,
Go thru this code it may help you. check bold code for the table control..
report zsunil_bdc
no standard page heading line-size 255.
INTERNAL TABLES *
DATA: BEGIN OF IT_KNA1 OCCURS 0,
CUSTOMER LIKE RF02D-KUNNR,
COMPANY_CODE LIKE RF02D-BUKRS,
ACCOUNT_GROUP LIKE RF02D-KTOKD,
TITLE LIKE KNA1-ANRED,
NAME LIKE KNA1-NAME1,
SEARCH_TERM LIKE KNA1-SORTL,
STREET LIKE KNA1-STRAS,
CITY LIKE KNA1-ORT01,
POSTAL_CODE LIKE KNA1-PSTLZ,
COUNTRY LIKE KNA1-LAND1,
LANGUAGE_KEY LIKE KNA1-SPRAS,
CNTRY LIKE KNBK-BANKS,
BANK_KEY LIKE KNBK-BANKL,
BANK_ACCOUNT LIKE KNBK-BANKN,
REC_ACCOUNT LIKE KNB1-AKONT,
END OF IT_KNA1.
DATA: IT_BDCDATA TYPE BDCDATA OCCURS 0 WITH HEADER LINE.
DATA: IT_MESSAGES TYPE BDCMSGCOLL OCCURS 0 WITH HEADER LINE.
SELECTION SCREEN *
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
PARAMETER P_FILE TYPE RLGRAP-FILENAME DEFAULT 'C:\CUSTOMER.TXT'
OBLIGATORY.
SELECTION-SCREEN END OF BLOCK B1.
AT SELECTION SCREEN *
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FILE.
PERFORM HELP_FILE USING P_FILE.
START OF SELECTION *
START-OF-SELECTION.
*UPLOADING THE FILE FROM WORKSTATION
PERFORM UPLOAD_FILE USING P_FILE.
*POPULATING DATA.
PERFORM POPULATE_FILE.
*& Form HELP_FILE
text
-->P_P_FILE text
form HELP_FILE using p_p_file.
DATA: L_FILE TYPE IBIPPARMS-PATH.
CALL FUNCTION 'F4_FILENAME'
EXPORTING
PROGRAM_NAME = SYST-CPROG
DYNPRO_NUMBER = SYST-DYNNR
FIELD_NAME = ' '
IMPORTING
FILE_NAME = L_FILE.
P_P_FILE = L_FILE.
endform. " HELP_FILE
*& Form UPLOAD_FILE
text
-->P_P_FILE text
form UPLOAD_FILE using p_p_file.
CALL FUNCTION 'UPLOAD'
EXPORTING
CODEPAGE = ' '
FILENAME = 'P_P_FILE'
FILETYPE = 'DAT'
ITEM = ' '
FILEMASK_MASK = ' '
FILEMASK_TEXT = ' '
FILETYPE_NO_CHANGE = ' '
FILEMASK_ALL = ' '
FILETYPE_NO_SHOW = ' '
LINE_EXIT = ' '
USER_FORM = ' '
USER_PROG = ' '
SILENT = 'S'
IMPORTING
FILESIZE =
CANCEL =
ACT_FILENAME =
ACT_FILETYPE =
TABLES
data_tab = IT_KNA1
EXCEPTIONS
CONVERSION_ERROR = 1
INVALID_TABLE_WIDTH = 2
INVALID_TYPE = 3
NO_BATCH = 4
UNKNOWN_ERROR = 5
GUI_REFUSE_FILETRANSFER = 6
OTHERS = 7.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endform. " UPLOAD_FILE
*& Form POPULATE_FILE
text
--> p1 text
<-- p2 text
form POPULATE_FILE .
DATA: L_STRING TYPE STRING,
L_COUNTER(2) TYPE N,
V_INDEX TYPE SY-TABIX.
LOOP AT IT_KNA1.
V_INDEX = SY-TABIX.
AT NEW CUSTOMER.
READ TABLE IT_KNA1 INDEX V_INDEX.
IF SY-SUBRC = 0.
perform bdc_dynpro using 'SAPMF02D' '0105'.
perform bdc_field using 'BDC_CURSOR'
'RF02D-KTOKD'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'RF02D-KUNNR'
IT_KNA1-CUSTOMER.
perform bdc_field using 'RF02D-BUKRS'
IT_KNA1-COMPANY_CODE.
perform bdc_field using 'RF02D-KTOKD'
IT_KNA1-ACCOUNT_GROUP.
*PERFORM BDC_FIELD USING 'RF02D-D0130'
'X'.
perform bdc_dynpro using 'SAPMF02D' '0110'.
perform bdc_field using 'BDC_CURSOR'
'KNA1-SPRAS'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'KNA1-ANRED'
IT_KNA1-TITLE.
perform bdc_field using 'KNA1-NAME1'
IT_KNA1-NAME.
perform bdc_field using 'KNA1-SORTL'
IT_KNA1-SEARCH_TERM.
perform bdc_field using 'KNA1-STRAS'
IT_KNA1-STREET.
perform bdc_field using 'KNA1-ORT01'
IT_KNA1-CITY.
perform bdc_field using 'KNA1-PSTLZ'
IT_KNA1-POSTAL_CODE.
perform bdc_field using 'KNA1-LAND1'
IT_KNA1-COUNTRY.
perform bdc_field using 'KNA1-SPRAS'
IT_KNA1-LANGUAGE_KEY.
perform bdc_dynpro using 'SAPMF02D' '0120'.
perform bdc_field using 'BDC_CURSOR'
'KNA1-LIFNR'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_dynpro using 'SAPMF02D' '0130'.
PERFORM BDC_FIELD USING 'RF02D-D0130'
'X'.
perform bdc_field using 'BDC_CURSOR'
'KNBK-BANKN(01)'.
perform bdc_field using 'BDC_OKCODE'
'=ENTR'.
perform bdc_dynpro using 'SAPMF02D' '0210'.
perform bdc_field using 'BDC_CURSOR'
'KNB1-AKONT'.
perform bdc_field using 'BDC_OKCODE'
'=UPDA'.
perform bdc_field using 'KNB1-AKONT'
IT_KNA1-REC_ACCOUNT.
perform bdc_dynpro using 'SAPLRSFH' '0100'.
perform bdc_field using 'BDC_OKCODE'
'/EBACK'.
perform bdc_field using 'BDC_CURSOR'
'RSIODYNP4-LOW(01)'.
ENDIF.
ENDAT.
L_COUNTER = L_COUNTER + 1.
CLEAR L_STRING.
CONCATENATE 'KNBK-BANKS(' L_COUNTER ')' INTO L_STRING.
PERFORM BDC_FIELD USING L_STRING
IT_KNA1-CNTRY.
CLEAR L_STRING.
CONCATENATE 'KNBK-BANKL(' L_COUNTER ')' INTO L_STRING.
PERFORM BDC_FIELD USING L_STRING
IT_KNA1-BANK_KEY.
CLEAR L_STRING.
CONCATENATE 'KNBK-BANKN(' L_COUNTER ')' INTO L_STRING.
PERFORM BDC_FIELD USING L_STRING
IT_KNA1-BANK_ACCOUNT.
AT END OF CUSTOMER.
READ TABLE IT_KNA1 INDEX V_INDEX.
IF SY-SUBRC = 0.
CALL TRANSACTION 'FD01' USING IT_BDCDATA MODE 'A' UPDATE 'S' MESSAGES
INTO IT_MESSAGES.
IF SY-SUBRC <> 0.
PERFORM EMPLOYEEID_ERROR.
*ELSE.
ENDIF.
WRITE: SY-SUBRC.
perform message_format_write.
*ENDIF.
*WRITE: SY-SUBRC.
CLEAR IT_BDCDATA.
REFRESH IT_BDCDATA.
ENDIF.
ENDAT.
ENDLOOP.
endform. " POPULATE_FILE
*& Form bdc_dynpro
text
-->P_0224 text
-->P_0225 text
form bdc_dynpro using value(p_0224)
value(p_0225).
IT_BDCDATA-PROGRAM = P_0224.
IT_BDCDATA-DYNPRO = P_0225.
IT_BDCDATA-DYNBEGIN = 'X'.
APPEND IT_BDCDATA.
CLEAR IT_BDCDATA.
endform. " bdc_dynpro
*& Form bdc_field
text
-->P_0229 text
-->P_0230 text
form bdc_field using value(p_0229)
value(p_0230).
IT_BDCDATA-FNAM = P_0229.
IT_BDCDATA-FVAL = P_0230.
APPEND IT_BDCDATA.
CLEAR IT_BDCDATA.
endform. " bdc_field
*& Form EMPLOYEEID_ERROR
text
--> p1 text
<-- p2 text
form EMPLOYEEID_ERROR .
CALL FUNCTION 'BDC_OPEN_GROUP'
EXPORTING
CLIENT = SY-MANDT
DEST = FILLER8
GROUP = 'Z50583_REC1'
HOLDDATE = FILLER8
KEEP = 'X'
USER = SY-UNAME
RECORD = FILLER1
PROG = SY-CPROG
IMPORTING
QID =
EXCEPTIONS
CLIENT_INVALID = 1
DESTINATION_INVALID = 2
GROUP_INVALID = 3
GROUP_IS_LOCKED = 4
HOLDDATE_INVALID = 5
INTERNAL_ERROR = 6
QUEUE_ERROR = 7
RUNNING = 8
SYSTEM_LOCK_ERROR = 9
USER_INVALID = 10
OTHERS = 11.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'BDC_INSERT'
EXPORTING
TCODE = 'FD01'
POST_LOCAL = NOVBLOCAL
PRINTING = NOPRINT
SIMUBATCH = ' '
CTUPARAMS = ' '
TABLES
dynprotab = IT_BDCDATA
EXCEPTIONS
INTERNAL_ERROR = 1
NOT_OPEN = 2
QUEUE_ERROR = 3
TCODE_INVALID = 4
PRINTING_INVALID = 5
POSTING_INVALID = 6
OTHERS = 7.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'BDC_CLOSE_GROUP'
EXCEPTIONS
NOT_OPEN = 1
QUEUE_ERROR = 2
OTHERS = 3.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endform. " EMPLOYEEID_ERROR
*& Form message_format_write
text
--> p1 text
<-- p2 text
form message_format_write .
DATA: L_MSG(200).
CALL FUNCTION 'FORMAT_MESSAGE'
EXPORTING
ID = SY-MSGID
LANG = SY-LANGU
NO = SY-MSGNO
V1 = SY-MSGV1
V2 = SY-MSGV2
V3 = SY-MSGV3
V4 = SY-MSGV4
IMPORTING
MSG = L_MSG
EXCEPTIONS
NOT_FOUND = 1
OTHERS = 2.
WRITE: / L_MSG.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endform. " message_format_write
~~Guduri

How to handle Table control in BDC

How to handle Table control in BDC

HI,
Table Control in BDC
HI,
Refer the link:
http://www.sap-img.com/abap/bdc-example-using-table-control-in-bdc.htm
The concept is easy: it has to indicate the index of the table control in the field name, so if you have to populate the first record of table control:
BDC-FIELDNAME = <FIELDNAME>(01).
If you fill the second row:
BDC-FIELDNAME = <FIELDNAME>(02).
and so....
Now the problem is usually on how many records you have to load, because u can fill only the rows of table control available in the screen, If you have more records than it can be displayed yuo have to simulate the command to go next page.
The number of recod can be displayed can depend on pc resolution and many program haven't command to go to next page (in this case it could be impossible create a BDC program9.
A way to create a bdc program resolution indipendent is to work on the first and second row.
- Place the first hit in the first row of bdc;
- Place the second insert in the second row of bdc;
- Place the last hit to the top of table control;
- Place the next hit in the second row;
- Place the last hit to the top of table control;
- Place the next hit in the second row;
- .... and so
For more info: Search in SDN with TABLE CONTROL IN BDC.
Will get a lot of related links.
Reward points if this Helps.
Manish

How to handle table controls in BDC

Hi All,
Can u please help me out in my BDC program which involves header data and the item data which is to be filled in a Table Control of a particular transaction .If anyone can send me already existing code it would be of great help..
Thanks in Advance
Kishore

Hi Kishore
http://www.sap-img.com/abap/bdc-example-using-table-control-in-bdc.htm
regards
SAmeer

How can we handle table control in BDC?

Hi,
How can we handle table control in BDC?
regards
eswar

hi,
check this example:
http://www.sap-img.com/abap/bdc-example-using-table-control-in-bdc.htm
ex:
*& Report ZSR_BDC_TBCTRL
REPORT ZSR_BDC_TBCTRL
 NO STANDARD PAGE HEADING LINE-SIZE 255.
TABLES : RF02K,LFA1,LFBK.
DATA : BEGIN OF IT_VEN OCCURS 0,
 LIFNR LIKE RF02K-LIFNR,
 KTOKK LIKE RF02K-KTOKK,
 NAME1 LIKE LFA1-NAME1,
 SORTL LIKE LFA1-SORTL,
 LAND1 LIKE LFA1-LAND1,
 SPRAS LIKE LFA1-SPRAS,
 BANKS(6) TYPE C,
 BANKL(17) TYPE C,
 BANKN(19) TYPE C,
 END OF IT_VEN.
DATA : BEGIN OF BANKS OCCURS 0,
 BANKS LIKE LFBK-BANKS,
 END OF BANKS,
 BEGIN OF BANKL OCCURS 0,
 BANKL LIKE LFBK-BANKL,
 END OF BANKL,
 BEGIN OF BANKN OCCURS 0,
 BANKN LIKE LFBK-BANKN,
 END OF BANKN.
DATA : FLD(20) TYPE C,
 CNT(2) TYPE N.
DATA : BDCTAB LIKE BDCDATA OCCURS 0 WITH HEADER LINE.
INCLUDE BDCRECX1.
START-OF-SELECTION.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
 FILENAME = 'Z:\sr.TXT'
 FILETYPE = 'ASC'
 HAS_FIELD_SEPARATOR = 'X'
HEADER_LENGTH = 0
READ_BY_LINE = 'X'
DAT_MODE = ' '
CODEPAGE = ' '
IGNORE_CERR = ABAP_TRUE
REPLACEMENT = '#'
CHECK_BOM = ' '
IMPORTING
FILELENGTH =
HEADER =
TABLES
 DATA_TAB = IT_VEN
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_READ_ERROR = 2
NO_BATCH = 3
GUI_REFUSE_FILETRANSFER = 4
INVALID_TYPE = 5
NO_AUTHORITY = 6
UNKNOWN_ERROR = 7
BAD_DATA_FORMAT = 8
HEADER_NOT_ALLOWED = 9
SEPARATOR_NOT_ALLOWED = 10
HEADER_TOO_LONG = 11
UNKNOWN_DP_ERROR = 12
ACCESS_DENIED = 13
DP_OUT_OF_MEMORY = 14
DISK_FULL = 15
DP_TIMEOUT = 16
OTHERS = 17
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
PERFORM OPEN_GROUP.
LOOP AT IT_VEN.
 REFRESH BDCDATA.
 REFRESH : BANKS,BANKL,BANKN..
 SPLIT IT_VEN-BANKS AT ',' INTO TABLE BANKS.
 SPLIT IT_VEN-BANKL AT ',' INTO TABLE BANKL.
 SPLIT IT_VEN-BANKN AT ',' INTO TABLE BANKN.
PERFORM BDC_DYNPRO USING 'SAPMF02K' '0100'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
 'RF02K-KTOKK'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
 '/00'.
PERFORM BDC_FIELD USING 'RF02K-LIFNR'
 IT_VEN-LIFNR.
PERFORM BDC_FIELD USING 'RF02K-KTOKK'
 IT_VEN-KTOKK.
PERFORM BDC_DYNPRO USING 'SAPMF02K' '0110'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
 'LFA1-SPRAS'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
 '/00'.
PERFORM BDC_FIELD USING 'LFA1-NAME1'
 IT_VEN-NAME1.
PERFORM BDC_FIELD USING 'LFA1-SORTL'
 IT_VEN-SORTL.
PERFORM BDC_FIELD USING 'LFA1-LAND1'
 IT_VEN-LAND1.
PERFORM BDC_FIELD USING 'LFA1-SPRAS'
 IT_VEN-SPRAS.
PERFORM BDC_DYNPRO USING 'SAPMF02K' '0120'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
 'LFA1-KUNNR'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
 '/00'.
PERFORM BDC_DYNPRO USING 'SAPMF02K' '0130'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
 'LFBK-BANKN(02)'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
 '=ENTR'.
*perform bdc_field using 'LFBK-BANKS(01)'
 'DE'.
*perform bdc_field using 'LFBK-BANKS(02)'
 'DE'.
*perform bdc_field using 'LFBK-BANKL(01)'
 '10020030'.
*perform bdc_field using 'LFBK-BANKL(02)'
 '67270003'.
*perform bdc_field using 'LFBK-BANKN(01)'
 '12345'.
*perform bdc_field using 'LFBK-BANKN(02)'
 '66666'.
MOVE 1 TO CNT.
 LOOP AT BANKS.
 CONCATENATE 'LFBK-BANKS(' CNT ') ' INTO FLD.
 PERFORM BDC_FIELD USING FLD BANKS-BANKS.
 CNT = CNT + 1.
 ENDLOOP.
 MOVE 1 TO CNT.
 LOOP AT BANKL.
 CONCATENATE 'LFBK-BANKL(' CNT ') ' INTO FLD.
 PERFORM BDC_FIELD USING FLD BANKL-BANKL.
 CNT = CNT + 1.
 ENDLOOP.
 MOVE 1 TO CNT.
 LOOP AT BANKN.
 CONCATENATE 'LFBK-BANKN(' CNT ') ' INTO FLD.
 PERFORM BDC_FIELD USING FLD BANKN-BANKN.
 CNT = CNT + 1.
 ENDLOOP.
PERFORM BDC_DYNPRO USING 'SAPMF02K' '0130'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
 'LFBK-BANKS(01)'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
 '=ENTR'.
PERFORM BDC_DYNPRO USING 'SAPLSPO1' '0300'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
 '=YES'.
PERFORM BDC_TRANSACTION USING 'XK01'.
ENDLOOP.
PERFORM CLOSE_GROUP.

How to handle Table controls with XD01 in BDC

How to handle Table controls with XD01 in BDC - If there are more than 5/6 records in Table control. - Can any one explain it with a piece of code plz..
Thanks & Regards,
Krishna Chaitanya

Hi
check this code...viz for xko1....
DATA: BEGIN OF it_xk01 OCCURS 0,
 f1(1),
 f2(5),
 f3(5),
 f4(9),
 f5(9),
 END OF it_xk01.
DATA: v_count(2) VALUE '00',
 v_koinh(14),
 v_banks(14),
 v_bankn(14),
 v_bankl(14),
 it_bdcdata TYPE STANDARD TABLE OF bdcdata WITH HEADER LINE,
 wa_ctuparams type ctu_params.
PARAMETERS: p_file TYPE rlgrap-filename OBLIGATORY.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
PERFORM get_f4.
START-OF-SELECTION.
PERFORM upload_data.
END-OF-SELECTION.
LOOP AT it_xk01.
 IF it_xk01-f1 = 'H'.
 PERFORM bdc_dynpro USING 'SAPMF02K' '0100'.
 PERFORM bdc_field USING 'BDC_CURSOR'
 'RF02K-KTOKK'.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '/00'.
 PERFORM bdc_field USING 'RF02K-KTOKK'
 it_xk01-f2.
 ENDIF.
 IF it_xk01-f1 = 'N'.
 PERFORM bdc_dynpro USING 'SAPMF02K' '0110'.
 PERFORM bdc_field USING 'BDC_CURSOR'
 'LFA1-PSTLZ'.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '=VW'.
 PERFORM bdc_field USING 'LFA1-ANRED'
 'Mr'.
 PERFORM bdc_field USING 'LFA1-NAME1'
 it_xk01-f2.
 PERFORM bdc_field USING 'LFA1-SORTL'
 it_xk01-f3.
 PERFORM bdc_field USING 'LFA1-PSTLZ'
 it_xk01-f4.
 PERFORM bdc_field USING 'LFA1-LAND1'
 it_xk01-f5.
 PERFORM bdc_dynpro USING 'SAPMF02K' '0120'.
 PERFORM bdc_field USING 'BDC_CURSOR'
 'LFA1-KUNNR'.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '=VW'.
 ENDIF.
 IF it_xk01-f1 = 'I'.
 v_count = v_count + 1.
 IF v_count le 5.
 CONCATENATE 'LFBK-KOINH(' v_count ')' INTO v_koinh.
 CONCATENATE 'LFBK-BANKS(' v_count ')' INTO v_banks.
 CONCATENATE 'LFBK-BANKN(' v_count ')' INTO v_bankn.
 CONCATENATE 'LFBK-BANKL(' v_count ')' INTO v_bankl.
 CONDENSE v_koinh NO-GAPS.
 CONDENSE v_banks NO-GAPS.
 CONDENSE v_bankl NO-GAPS.
 CONDENSE v_bankn NO-GAPS.
 PERFORM bdc_dynpro USING 'SAPMF02K' '0130'.
 PERFORM bdc_field USING 'BDC_CURSOR'
 v_koinh.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '/00'.
 PERFORM bdc_field USING v_banks
 it_xk01-f2.
 PERFORM bdc_field USING v_bankl
 it_xk01-f3.
 PERFORM bdc_field USING v_bankn
 it_xk01-f4.
 PERFORM bdc_field USING v_koinh
 it_xk01-f5.
 else.
 PERFORM bdc_dynpro USING 'SAPMF02K' '0130'.
 PERFORM bdc_field USING 'BDC_CURSOR'
 v_koinh.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '=P+'.
 v_count = 1.
 PERFORM bdc_dynpro USING 'SAPMF02K' '0130'.
 PERFORM bdc_field USING 'BDC_CURSOR'
 v_koinh.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '/00'.
 CONCATENATE 'LFBK-KOINH(' v_count ')' INTO v_koinh.
 CONCATENATE 'LFBK-BANKS(' v_count ')' INTO v_banks.
 CONCATENATE 'LFBK-BANKN(' v_count ')' INTO v_bankn.
 CONCATENATE 'LFBK-BANKL(' v_count ')' INTO v_bankl.
 CONDENSE v_koinh NO-GAPS.
 CONDENSE v_banks NO-GAPS.
 CONDENSE v_bankl NO-GAPS.
 CONDENSE v_bankn NO-GAPS.
 PERFORM bdc_field USING v_banks
 it_xk01-f2.
 PERFORM bdc_field USING v_bankl
 it_xk01-f3.
 PERFORM bdc_field USING v_bankn
 it_xk01-f4.
 PERFORM bdc_field USING v_koinh
 it_xk01-f5.
 ENDIF.
 ENDIF.
 CLEAR it_xk01.
ENDLOOP.
PERFORM bdc_dynpro USING 'SAPMF02K' '0130'.
PERFORM bdc_field USING 'BDC_CURSOR'
 v_koinh.
PERFORM bdc_field USING 'BDC_OKCODE'
 '/00'.
perform bdc_dynpro using 'SAPLSPO1' '0300'.
perform bdc_field using 'BDC_OKCODE'
 '=YES'.
wa_ctuparams-DISMODE = 'A'.
wa_ctuparams-UPDMODE = 'S'.
wa_ctuparams-DEFSIZE = 'X'.
CALL TRANSACTION 'XK01' USING it_bdcdata MODE 'A'
 UPDATE 'S'.
options from wa_ctuparams.
MODE 'A'
 UPDATE 'S'.
*& Form upload_data
 text
FORM upload_data .
DATA: lv_infile TYPE string.
lv_infile = p_file.
CALL FUNCTION 'GUI_UPLOAD'
 EXPORTING
 filename = lv_infile
 filetype = 'ASC'
 has_field_separator = 'X'
 TABLES
 data_tab = it_xk01.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " upload_data
*& Form get_f4
 text
FORM get_f4 .
CALL FUNCTION 'F4_FILENAME'
 EXPORTING
 program_name = syst-cprog
 dynpro_number = syst-dynnr
 FIELD_NAME = ' '
 IMPORTING
 file_name = p_file.
ENDFORM. " get_f4
 Start new screen *
FORM bdc_dynpro USING program dynpro.
CLEAR it_bdcdata.
it_bdcdata-program = program.
it_bdcdata-dynpro = dynpro.
it_bdcdata-dynbegin = 'X'.
APPEND it_bdcdata.
ENDFORM. "BDC_DYNPRO
 Insert field *
FORM bdc_field USING fnam fval.
IF FVAL <> NODATA.
CLEAR it_bdcdata.
it_bdcdata-fnam = fnam.
it_bdcdata-fval = fval.
APPEND it_bdcdata.
ENDIF.
ENDFORM. "BDC_FIELD
*H 0302
*N sdng dddsj 500020 IN
*I IN ICICI 734897597 xyz
*I IN SBH 768346687 abc
*I IN SBI 345687346 fgh
*I IN SBH 763846878 ujhgf
*I IN HSBC 797893778 fvdg
*I IN HDFC 723678638 fdgf
*I IN 4444 435645646 fgfg
*I IN 3400 763468768 gfgfg

How to use table control in bdc, plz somebody tell me.

Hi Gurus,
Ples tell me
how to use table control in bdc, plz somebody tell me.
And send Sample CODE also. Thnaks in advance.

hi,
Table control / step loop in BDC
Steploop and table contol is inevitable in certain transactions. When we run BDC for such transactions, we will face the situation: how many visible lines of steploop/tablecontrol are on the screen?
Although we can always find certain method to deal with it, such as function code 'NP', 'POPO', considering some extreme situation: there is only one line visible one the screen, our BDC program should display an error message. (See transaction 'ME21', we you resize your screen to let only one row visible, you can not enter mutiple lines on this screen even you use 'NP')
we can determine the number of visible lines on Transaction Screen from our Calling BDC program.
Demo ABAP code has two purposes:
1. how to determine number of visible lines and how to calculte page number;
(the 'calpage' routine has been modify to meet general purpose usage)
2. using field symbol in BDC program, please pay special attention to the difference
in Static ASSIGN and Dynamic ASSIGN.
Step1: go to screen painter to display the screen 121, then we can count the fixed line on this screen, there is 7 lines above the steploop and 2 lines below the steploop, so there are total 9 fixed lines on this screen. This means except these 9 lines, all the other line is for step loop.
Then have a look at steploop itselp, one entry of it will occupy two lines.
(Be careful, for table control, the head and the bottom scroll bar will possess another two fixed lines, and there is a maximum number for table line)
Now we have : FixedLine = 9
LoopLine = 2(for table control, LoopLine is always equal to 1)
Step2: go to transaction itself(ME21) to see how it roll page, in ME21, the first line of new page is always occupied by the last line of last page, so it begin with index '02', but in some other case, fisrt line is empty and ready for input.
Now we have: FirstLine = 0
or FirstLine = 1 ( in our case, FirstLine is 1 because the first line of new page is fulfilled)
Step3: write a subroutine calcalculating number of pages
(here, the name of actual parameter is the same as formal parameter)
global data: FixedLine type i, " number of fixed line on a certain screen
LoopLine type i, " the number of lines occupied by one steploop item
FirstLine type i, " possbile value 0 or 1, 0 stand for the first line of new " scrolling screen is empty, otherwise is 1
Dataline type i, " number of items you will use in BDC, using DESCRIBE to get
pageno type i, " you need to scroll screen how many times.
line type i, " number of lines appears on the screen.
index(2) type N, " the screen index for certain item
begin type i, " from parameter of loop
end type i. " to parameter of loop
*in code sample, the DataTable-linindex stands for the table index number of this line
form calpage using FixedLine type i (see step 1)
LoopLine type i (see step 1)
FirstLine type i (see step 2)
DataLine type i ( this is the item number you will enter in transaction)
changing pageno type i (return the number of page, depends on run-time visible line in table control/ Step Loop)
changing line type i.(visible lines one the screen)
data: midd type i,
vline type i, "visible lines
if DataLine eq 0.
Message eXXX.
endif.
vline = ( sy-srows - FixedLine ) div LoopLine.
*for table control, you should compare vline with maximum line of
*table control, then take the small one that is min(vline, maximum)
*here only illustrate step loop
if FirstLine eq 0.
pageno = DataLine div vline.
if pageno eq 0.
pageno = pageno + 1.
endif.
elseif FirstLine eq 1.
pageno = ( DataLine - 1 ) div ( vline - 1 ) + 1.
midd = ( DataLine - 1 ) mod ( vline - 1).
if midd = 0 and DataLine gt 1.
pageno = pageno - 1.
endif.
endif.
line = vline.
endform.
Step4 write a subroutine to calculate the line index for each item.
form calindex using Line type i (visible lines on the screen)
FirstLine type i(see step 2)
LineIndex type i(item index)
changing Index type n. (index on the screen)
if FirstLine = 0.
index = LineIndex mod Line.
if index = '00'.
index = Line.
endif.
elseif FirstLine = 1.
index = LineIndex mod ( Line - 1 ).
if ( index between 1 and 0 ) and LineIndex gt 1.
index = index + Line - 1.
endif.
if Line = 2.
index = index + Line - 1.
endif.
endif.
endform.
Step5 write a subroutine to calculate the loop range.
form calrange using Line type i ( visible lines on the screen)
DataLine type i
FirstLine type i
loopindex like sy-index
changing begin type i
end type i.
If FirstLine = 0.
if loopindex = 1.
begin = 1.
if DataLine <= Line.
end = DataLine.
else.
end = Line.
endif.
elseif loopindex gt 1.
begin = Line * ( loopindex - 1 ) + 1.
end = Line * loopindex.
if end gt DataLine.
end = DataLine.
endif.
endif.
elseif FirstLine = 1.
if loopindex = 1.
begin = 1.
if DataLine <= Line.
end = DataLine.
else.
end = Line.
endif.
elseif loop index gt 1.
begin = ( Line - 1 ) * ( loopindex - 1 ) + 2.
end = ( Line - 1 ) * ( loopindex - 1 ) + Line.
if end gt DataLine.
end = DataLine.
endif.
endif.
endif.
endform.
Step6
using field sysbol in your BDC, for example: in ME21, but you should calculate each item will correponding to which index in steploop/Table Control
form creat_bdc.
field-symbols: , , .
data: name1(14) value 'EKPO-EMATN(XX)',
name2(14) value 'EKPO-MENGE(XX)',
name3(15) value 'RM06E-SELKZ(XX)'.
assign: name1 to ,
name2 to ,
name3 to .
do pageno times.
if sy-index gt 1
*insert scroll page ok_code"
endif.
perform calrange using Line DataLine FirstLine sy-index
changing begin end.
loop at DataTable from begin to end.
perform calindex using Line FirstLine DataTable-LineIndex changing Index.
name1+11(2) = Index.
name2+11(2) = Index.
name3+12(2) = Index.
perform bdcfield using DataTable-matnr.
perform bdcfield using DataTable-menge.
perform bdcfield using DataTable-indicator.
endloop.
enddo.
example 1
BDC table control is an area on the screen in which you can display data in tabular form. You process it using a loop. Table controls are comparable to step loop tables. While a table control consists of a single definition row, step loop blocks may extend over more than one row. Table controls are more flexible than step loops, and are intended to replace them
When you need to handle a scenario like in sales order,it may contain more than one material,if you have more than one material We have to use table control,it will have number of columns and number of rows.
Table controls allow you to enter, display, and modify tabular data easily on the screen
Check this code,
PARAMETERS: file1 LIKE rlgrap-filename.
*Internal Table Declarations
DATA: BEGIN OF itab OCCURS 0,
matnr(18) TYPE c, "MaterialNumber
werks(4) TYPE c, "Plant
vdatu(10) TYPE c, "Valid From Date
bdatu(10) TYPE c, "Valid To Date
lifnr(10) TYPE c, "Vendor Number
ekorg(4) TYPE c, "Purchasing Organization
feskz TYPE c, "Fixed
autet TYPE c, "MRP Indicator
END OF itab.
DATA: bdcdata LIKE TABLE OF bdcdata WITH HEADER LINE.
*VARIABLES Declarations
DATA: wa1 LIKE LINE OF itab. "Workarea for ITAB
DATA: n TYPE i, "Check
count TYPE i.
DATA: cnt(2), "Counter
wa(15). "Workarea to hold concatenatedvalue
DATA v_msg(100).
DATA: flag.
DATA: file TYPE string.
*Initialization event
INITIALIZATION.
*At-selection-screen event
*To provide Input help for file name
AT SELECTION-SCREEN ON VALUE-REQUEST FOR file1.
CALL FUNCTION 'F4_FILENAME'
EXPORTING
program_name = syst-cprog
dynpro_number = syst-dynnr
IMPORTING
file_name = file1.
*START-OF-SELECTION EVENT
START-OF-SELECTION.
MOVE file1 TO file.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = file
filetype = 'ASC'
has_field_separator = 'X'
TABLES
data_tab = itab
EXCEPTIONS
file_open_error = 1
file_read_error = 2
no_batch = 3
gui_refuse_filetransfer = 4
invalid_type = 5
no_authority = 6
unknown_error = 7
bad_data_format = 8
header_not_allowed = 9
separator_not_allowed = 10
header_too_long = 11
unknown_dp_error = 12
access_denied = 13
dp_out_of_memory = 14
disk_full = 15
dp_timeout = 16
OTHERS = 17.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
*To populate BDCDATA and start data transfer
LOOP AT itab .
To validate Plant range
IF itab-werks = '1000' OR itab-werks = '2000'
OR itab-werks = '1008'.
AT NEW werks.
CLEAR: n.
cnt = 1.
PERFORM bdc_dynpro USING 'SAPLMEOR' '0200'.
PERFORM bdc_field USING 'BDC_CURSOR'
'EORD-MATNR'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'EORD-MATNR'
itab-matnr.
PERFORM bdc_field USING 'EORD-WERKS'
itab-werks.
PERFORM bdc_dynpro USING 'SAPLMEOR' '0205'.
CONCATENATE 'EORD-EKORG(' cnt ')' INTO wa.
PERFORM bdc_field USING 'BDC_CURSOR'
wa.
PERFORM bdc_field USING 'BDC_OKCODE'
'=BU'.
ENDAT.
IF n = 12.
READ TABLE bdcdata WITH KEY fval = '=BU'.
bdcdata-fval = '=NS'.
MODIFY bdcdata INDEX sy-tabix TRANSPORTING fval.
PERFORM bdc_dynpro USING 'SAPLMEOR' '0205'.
PERFORM bdc_field USING 'BDC_CURSOR'
'EORD-VDATU(01)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=BU'.
cnt = 2.
n = 2.
ENDIF.
CONCATENATE 'EORD-VDATU(' cnt ')' INTO wa.
PERFORM bdc_field USING wa
itab-vdatu.
CONCATENATE 'EORD-BDATU(' cnt ')' INTO wa.
PERFORM bdc_field USING wa
itab-bdatu.
CONCATENATE 'EORD-LIFNR(' cnt ')' INTO wa.
PERFORM bdc_field USING wa
itab-lifnr.
CONCATENATE 'EORD-EKORG(' cnt ')' INTO wa.
PERFORM bdc_field USING wa
itab-ekorg.
CONCATENATE 'RM06W-FESKZ(' cnt ')' INTO wa.
PERFORM bdc_field USING wa
itab-feskz.
CONCATENATE 'EORD-AUTET(' cnt ')' INTO wa.
PERFORM bdc_field USING wa
itab-autet.
IF n <> 12.
n = cnt.
ENDIF.
cnt = cnt + 1.
AT END OF werks.
CALL TRANSACTION 'ME01' USING bdcdata
UPDATE 'S'
MODE 'A'.
CLEAR:bdcdata,bdcdata[].
CALL FUNCTION 'FORMAT_MESSAGE'
EXPORTING
id = sy-msgid
lang = 'EN'
no = sy-msgno
v1 = sy-msgv1
v2 = sy-msgv2
v3 = sy-msgv3
v4 = sy-msgv4
IMPORTING
msg = v_msg.
WRITE:/ v_msg.
CLEAR: bdcdata,bdcdata[],flag.
ENDAT.
ENDIF.
ENDLOOP.
Start new screen *
FORM bdc_dynpro USING program dynpro.
CLEAR bdcdata.
bdcdata-program = program.
bdcdata-dynpro = dynpro.
bdcdata-dynbegin = 'X'.
APPEND bdcdata.
ENDFORM.
Insert field values
FORM bdc_field USING fnam fval.
IF NOT fval IS INITIAL.
CLEAR bdcdata.
bdcdata-fnam = fnam.
bdcdata-fval = fval.
APPEND bdcdata.
ENDIF.
CLEAR wa.
ENDFORM.
Sample code 2
THis is example to upload the Bank details of the Vendor which has the TC.
REPORT zprataptable2
NO STANDARD PAGE HEADING LINE-SIZE 255.
DATA : BEGIN OF itab OCCURS 0,
i1 TYPE i,
lifnr LIKE rf02k-lifnr,
bukrs LIKE rf02k-bukrs,
ekorg LIKE rf02k-ekorg,
ktokk LIKE rf02k-ktokk,
anred LIKE lfa1-anred,
name1 LIKE lfa1-name1,
sortl LIKE lfa1-sortl,
land1 LIKE lfa1-land1,
akont LIKE lfb1-akont,
fdgrv LIKE lfb1-fdgrv,
waers LIKE lfm1-waers,
END OF itab.
DATA : BEGIN OF jtab OCCURS 0,
j1 TYPE i,
banks LIKE lfbk-banks,
bankl LIKE lfbk-bankl,
bankn LIKE lfbk-bankn,
END OF jtab.
DATA : cnt(4) TYPE n.
DATA : fdt(20) TYPE c.
DATA : c TYPE i.
INCLUDE bdcrecx1.
START-OF-SELECTION.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
filename = 'C:\first1.txt'
filetype = 'DAT'
TABLES
data_tab = itab.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
filename = 'C:\second.txt'
filetype = 'DAT'
TABLES
data_tab = jtab.
LOOP AT itab.
PERFORM bdc_dynpro USING 'SAPMF02K' '0100'.
PERFORM bdc_field USING 'BDC_CURSOR'
'RF02K-KTOKK'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'RF02K-LIFNR'
itab-lifnr.
PERFORM bdc_field USING 'RF02K-BUKRS'
itab-bukrs.
PERFORM bdc_field USING 'RF02K-EKORG'
itab-ekorg.
PERFORM bdc_field USING 'RF02K-KTOKK'
itab-ktokk.
PERFORM bdc_dynpro USING 'SAPMF02K' '0110'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFA1-LAND1'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'LFA1-ANRED'
itab-anred.
PERFORM bdc_field USING 'LFA1-NAME1'
itab-name1.
PERFORM bdc_field USING 'LFA1-SORTL'
itab-sortl.
PERFORM bdc_field USING 'LFA1-LAND1'
itab-land1.
PERFORM bdc_dynpro USING 'SAPMF02K' '0120'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFA1-KUNNR'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0130'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFBK-BANKN(01)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ENTR'.
cnt = 0.
LOOP AT jtab WHERE j1 = itab-i1.
cnt = cnt + 1.
CONCATENATE 'LFBK-BANKS(' cnt ')' INTO fdt.
PERFORM bdc_field USING fdt jtab-banks.
CONCATENATE 'LFBK-BANKL(' cnt ')' INTO fdt.
PERFORM bdc_field USING fdt jtab-bankl.
CONCATENATE 'LFBK-BANKN(' cnt ')' INTO fdt.
PERFORM bdc_field USING fdt jtab-bankn.
IF cnt = 5.
cnt = 0.
PERFORM bdc_dynpro USING 'SAPMF02K' '0130'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFBK-BANKS(01)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=P+'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0130'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFBK-BANKN(02)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ENTR'.
ENDIF.
ENDLOOP.
PERFORM bdc_dynpro USING 'SAPMF02K' '0130'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFBK-BANKS(01)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ENTR'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0210'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFB1-FDGRV'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'LFB1-AKONT'
itab-akont.
PERFORM bdc_field USING 'LFB1-FDGRV'
itab-fdgrv.
PERFORM bdc_dynpro USING 'SAPMF02K' '0215'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFB1-ZTERM'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0220'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFB5-MAHNA'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0310'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFM1-WAERS'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'LFM1-WAERS'
itab-waers.
PERFORM bdc_dynpro USING 'SAPMF02K' '0320'.
PERFORM bdc_field USING 'BDC_CURSOR'
'RF02K-LIFNR'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ENTR'.
PERFORM bdc_dynpro USING 'SAPLSPO1' '0300'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=YES'.
PERFORM bdc_transaction USING 'XK01'.
ENDLOOP.
PERFORM close_group.
Header file:
1 63190 0001 0001 0001 mr bal188 b in 31000 a1 inr
2 63191 0001 0001 0001 mr bal189 b in 31000 a1 inr
TC file:
1 in sb 11000
1 in sb 12000
1 in sb 13000
1 in sb 14000
1 in sb 15000
1 in sb 16000
1 in sb 17000
1 in sb 18000
1 in sb 19000
1 in sb 20000
1 in sb 21000
1 in sb 22000
2 in sb 21000
2 in sb 22000
Regards

Handling Table controls in BDC

Hi Team,
While handling Table controls in BDC(Call transaction), how do u ensure your code works Globally.
As screen Resolution may vary from system to system and
While building the logic we cannot fix the number of rows
is 14 or XXX.
After certain number of rows the logic should be done in such a way it should be scrolled down.
Please let me know Regarding this.
Thanks.
BestRegards,
S.Anilkumar

HI Anil,
You can use "CTU_PARAMS-DEFSIZE = 'X'" for fixing the screen resolution
You shuld use OK_CODE for scrolling is "P+".
if you need scroll after some records just use SY-TABIX .

How to handle table control in lsmw recording method

hi expert please tell me the procedure for how to handle table control in lsmw recording method
Locked for same reason as how to upload data for me01 using LSMW BDC METHOD
Edited by: Matt on May 9, 2011 8:52 AM

Sri,
just search in SDN search box by giving table control in lsmw you will get hell lot of threads for same.
Amit.

How to use table control in bdc briefly?

how to use table control in bdc briefly in description manner ?

Hi friend,
here i am giving exm. code of table control.see if help full to u.
REPORT zxk_01
 NO STANDARD PAGE HEADING LINE-SIZE 255.
include bdcrecx1.
TYPES : BEGIN OF ty_data,
 line(100) TYPE c,
 END OF ty_data.
PARAMETERS: p_pcfile LIKE ibipparms-path DEFAULT 'D:\NKS.TXT'.
DATA : g_filename TYPE string.
TYPES : BEGIN OF ty_file,
 lifnr(16) TYPE c, " vendor
 bukrs(4) TYPE c, "company code
 ktokk(4) TYPE c, " Acc grp
 anred(15) TYPE c, " Title
 name1(35) TYPE c, " name
 sortl(10) TYPE c, " search term
 stras(35) TYPE c, " street
 ort01(35) TYPE c, " city
 ort02(35) TYPE c, " district
 land1(3) TYPE c, " country
 pfach(10) TYPE c, " PO BOx
 spras(2) TYPE c, " language
 kunnr(10) TYPE c, " Customer
 vbund(6) TYPE c, " trading partner
 banks(3) TYPE c, " BANK COUNTRY
 bankl(15) TYPE c, " BANK KEY
 bankn(18) TYPE c, " BANK ACC
 koinh(60) TYPE c, " ACC HOLDER
 bkont(2) TYPE c, " CK
 bvtyp(4) TYPE c, " BNKT
 bkref(20) TYPE c, " REFERENCE DETAILS
 namev(35) TYPE c, " first NAME
 name2(35) TYPE c, " NAME
 telf1(16) TYPE c, " TELEPHONE
 abtnr(4) TYPE c, " DEPTT
 pafkt(2) TYPE c, " FUNCTION
 akont(10) TYPE c, " REC ACCOUNT
 zuawa(3) TYPE c, " SORT KEY
 lnrze(10) TYPE c, "HEAD OFFICE
 fdgrv(10) TYPE c, " CASH MGMT GRP,
 frgrp(4) TYPE c, " RELEASE GRP
 zterm(4) TYPE c, " PAY TERMS
 togru(4) TYPE c, " TOLERENCE GRP,
 reprf, "CHECK DOUBLE INV
 zwels(10) TYPE c, " PAYMENTS METHODS
 zahls, " PAYMENTS BLOCK
 hbkid(5) TYPE c, " house bank
 zgrup(2) TYPE c, " grouping key
 mahna(4) TYPE c, " dunn procedure
 mansp, " DUNNING BLOCK'
 gmvdt(10) TYPE c, " LEGAL DONE PROCEDURE
 lfrma(10) TYPE c, " DUNN RECEPIENT
 madat(10) TYPE c, " LAST DUNNED
 mahns(1) TYPE c, " dunning level
 mgrup(2) TYPE c, " grouping key
 busab(2) TYPE c, "dunning clerk
 END OF ty_file.
DATA : BEGIN OF it_xk01 OCCURS 0,
 lifnr(16) TYPE c, " vendor
 bukrs(4) TYPE c, "company code
 ktokk(4) TYPE c, " Acc grp
 anred(15) TYPE c, " Title
 name1(35) TYPE c, " name
 sortl(10) TYPE c, " search term
 stras(35) TYPE c, " street
 ort01(35) TYPE c, " city
 ort02(35) TYPE c, " district
 land1(3) TYPE c, " country
 pfach(10) TYPE c, " PO BOx
 spras(2) TYPE c, " language
 kunnr(10) TYPE c, " Customer
 vbund(6) TYPE c, " trading partner
 akont(10) TYPE c, " REC ACCOUNT
 zuawa(3) TYPE c, " SORT KEY
 lnrze(10) TYPE c, "HEAD OFFICE
 fdgrv(10) TYPE c, " CASH MGMT GRP,
 frgrp(4) TYPE c, " RELEASE GRP
 zterm(4) TYPE c, " PAY TERMS
 togru(4) TYPE c, " TOLERENCE GRP,
 reprf, "CHECK DOUBLE INV
 zwels(10) TYPE c, " PAYMENTS METHODS
 zahls, " PAYMENTS BLOCK
 hbkid(5) TYPE c, " house bank
 zgrup(2) TYPE c, " grouping key
 mahna(4) TYPE c, " dunn procedure
 mansp, " DUNNING BLOCK'
 gmvdt(10) TYPE c, " LEGAL DONE PROCEDURE
 lfrma(10) TYPE c, " DUNN RECEPIENT
 madat(10) TYPE c, " LAST DUNNED
 mahns(1) TYPE c, " dunning level
 mgrup(2) TYPE c, " grouping key
 busab(2) TYPE c, "dunning clerk
 END OF it_xk01.
 internal table for bank detaiils
DATA : BEGIN OF it_bank OCCURS 0,
 banks(3) TYPE c, " BANK COUNTRY
 bankl(15) TYPE c, " BANK KEY
 bankn(18) TYPE c, " BANK ACC
 koinh(60) TYPE c, " ACC HOLDER
 bkont(2) TYPE c, " CK
 bvtyp(4) TYPE c, " BNKT
 bkref(20) TYPE c, " REFERENCE DETAILS
 lifnr(16) TYPE c, " vendor
 xezer, " CHECK
 END OF it_bank.
INTERNAL TABLE FOR CONTACT PERSON
TYPES : BEGIN OF ty_cust,
 lifnr(16) TYPE c,
 namev(35) TYPE c, " first NAME
 name1(35) TYPE c, " NAME
 telf1(16) TYPE c, " TELEPHONE
 abtnr(4) TYPE c, " DEPTT
 pafkt(2) TYPE c, " FUNCTION
 END OF ty_cust.
INTERNAL TABLES DECLARATION
DATA : it_bdcdata LIKE bdcdata OCCURS 0 WITH HEADER LINE,
 it_bdcmsgcoll LIKE bdcmsgcoll OCCURS 0 WITH HEADER LINE,
 it_file TYPE TABLE OF ty_file,
 it_data TYPE TABLE OF ty_data,
 it_cust TYPE TABLE OF ty_cust.
 WORK AREAS FOR TYPES
DATA : wa_xk01 LIKE it_xk01,
 wa_data TYPE ty_data,
 wa_file TYPE ty_file,
 wa_bank LIKE it_bank,
 wa_cust TYPE ty_cust.
*CALL METHOD cl_gui_frontend_services=>gui_upload
 EXPORTING
 filename = lt_file
 filetype = 'ASC'
 CHANGING
 data_tab = iT_DATA.
IF sy-subrc <> 0.
ENDIF.
g_filename = p_pcfile.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
 filename = g_filename "'D:\TESTDATA1_XK01.txt'
 filetype = 'TXT'
 has_field_separator = 'X'
HEADER_LENGTH = 0
 read_by_line = 'X'
DAT_MODE = ' '
CODEPAGE = ' '
IGNORE_CERR = ABAP_TRUE
 replacement = ' '
CHECK_BOM = ' '
VIRUS_SCAN_PROFILE =
NO_AUTH_CHECK = ' '
IMPORTING
FILELENGTH =
HEADER =
TABLES
 data_tab = it_file
EXCEPTIONS
 file_open_error = 1
 file_read_error = 2
 no_batch = 3
 gui_refuse_filetransfer = 4
 invalid_type = 5
 no_authority = 6
 unknown_error = 7
 bad_data_format = 8
 header_not_allowed = 9
 separator_not_allowed = 10
 header_too_long = 11
 unknown_dp_error = 12
 access_denied = 13
 dp_out_of_memory = 14
 disk_full = 15
 dp_timeout = 16
 OTHERS = 17
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
LOOP AT it_file INTO wa_file .
ON CHANGE OF WA_FILE-LIFNR.
wa_xk01-lifnr = wa_file-lifnr.
wa_xk01-bukrs = wa_file-bukrs.
wa_xk01-ktokk = wa_file-ktokk.
wa_xk01-anred = wa_file-anred.
wa_xk01-name1 = wa_file-name1.
wa_xk01-sortl = wa_file-sortl.
wa_xk01-stras = wa_file-stras.
wa_xk01-ort01 = wa_file-ort01.
wa_xk01-ort02 = wa_file-ort02.
wa_xk01-land1 = wa_file-land1.
wa_xk01-pfach = wa_file-pfach.
wa_xk01-spras = wa_file-spras.
wa_xk01-kunnr = wa_file-kunnr.
wa_xk01-vbund = wa_file-vbund.
wa_xk01-akont = wa_file-akont.
wa_xk01-zuawa = wa_file-zuawa.
wa_xk01-lnrze = wa_file-lnrze.
wa_xk01-fdgrv = wa_file-fdgrv.
wa_xk01-frgrp = wa_file-frgrp.
wa_xk01-zterm = wa_file-zterm.
wa_xk01-togru = wa_file-togru.
wa_xk01-reprf = wa_file-reprf.
wa_xk01-zwels = wa_file-zwels.
wa_xk01-zahls = wa_file-zahls.
wa_xk01-hbkid = wa_file-hbkid.
wa_xk01-zgrup = wa_file-zgrup.
wa_xk01-mahna = wa_file-mahna.
wa_xk01-mansp = wa_file-mansp.
wa_xk01-gmvdt = wa_file-gmvdt.
wa_xk01-lfrma = wa_file-lfrma.
wa_xk01-madat = wa_file-madat.
wa_xk01-mahns = wa_file-mahns.
wa_xk01-mgrup = wa_file-mgrup.
wa_xk01-busab = wa_file-busab.
 APPEND wa_xk01 TO it_xk01.
 CLEAR : WA_XK01.
CONTINUE.
 ENDON.
IF WA_FILE-BANKS NE ''.
wa_bank-lifnr = wa_file-lifnr.
wa_bank-banks = wa_file-banks.
wa_bank-bankl = wa_file-bankl.
wa_bank-bankn = wa_file-bankn.
wa_bank-koinh = wa_file-koinh.
wa_bank-bkont = wa_file-bkont.
wa_bank-bvtyp = wa_file-bvtyp.
wa_bank-bkref = wa_file-bkref.
wa_cust-lifnr = wa_file-lifnr.
wa_cust-namev = wa_file-namev.
wa_cust-name1 = wa_file-name2.
wa_cust-telf1 = wa_file-telf1.
wa_cust-abtnr = wa_file-abtnr.
wa_cust-pafkt = wa_file-pafkt.
APPEND wa_bank TO it_bank.
APPEND wa_cust TO it_cust.
APPEND wa_xk01 TO it_xk01.
CLEAR : wa_bank , wa_cust.
ENDIF.
ENDLOOP.
START-OF-SELECTION.
LOOP AT it_xk01 INTO wa_xk01.
 REFRESH it_bdcdata.
 PERFORM bdc_dynpro USING 'SAPMF02K' '0100'.
 PERFORM bdc_field USING 'BDC_CURSOR'
 'RF02K-KTOKK'.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '/00'.
 PERFORM bdc_field USING 'RF02K-LIFNR'
 wa_xk01-lifnr. " vendor
 PERFORM bdc_field USING 'RF02K-BUKRS'
 wa_xk01-bukrs. " company cpode
 PERFORM bdc_field USING 'RF02K-KTOKK'
 wa_xk01-ktokk. " Acc group
 PERFORM bdc_dynpro USING 'SAPMF02K' '0110'.
 PERFORM bdc_field USING 'BDC_CURSOR'
 'LFA1-SPRAS'.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '/00'.
 PERFORM bdc_field USING 'LFA1-ANRED'
 wa_xk01-anred. " title
 PERFORM bdc_field USING 'LFA1-NAME1'
 wa_xk01-name1. " name
 PERFORM bdc_field USING 'LFA1-SORTL'
 wa_xk01-sortl. " ' search term'
 PERFORM bdc_field USING 'LFA1-STRAS'
 wa_xk01-stras. "street'
 PERFORM bdc_field USING 'LFA1-PFACH'
 wa_xk01-pfach. " po box
 PERFORM bdc_field USING 'LFA1-ORT01'
 wa_xk01-ort01. " city
 PERFORM bdc_field USING 'LFA1-ORT02'
 wa_xk01-ort02. " district
 PERFORM bdc_field USING 'LFA1-LAND1'
 wa_xk01-land1. " country
 PERFORM bdc_field USING 'LFA1-SPRAS'
 wa_xk01-spras. " language
 PERFORM bdc_dynpro USING 'SAPMF02K' '0120'.
 PERFORM bdc_field USING 'BDC_CURSOR'
 'LFA1-VBUND'.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '/00'.
 PERFORM bdc_field USING 'LFA1-KUNNR' " customer
 wa_xk01-kunnr.
 PERFORM bdc_field USING 'LFA1-VBUND'
 wa_xk01-vbund. " trading partner
 PERFORM bdc_dynpro USING 'SAPMF02K' '0130'.
 PERFORM bdc_field USING 'BDC_CURSOR'
 'LFBK-BKREF(01)'.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '=ENTR'.
 DATA : fnam(20) TYPE c,
 int TYPE c.
 MOVE 1 TO int.
 CLEAR wa_bank.
 LOOP AT it_bank INTO wa_bank WHERE lifnr = wa_xk01-lifnr.
 CONCATENATE 'LFBK-BANKS(' int ')' INTO fnam.
 PERFORM bdc_field USING fnam
 wa_bank-banks. " city
 CONCATENATE 'LFBK-BANKL(' int ')' INTO fnam.
 PERFORM bdc_field USING fnam
 wa_bank-bankl.
 CONCATENATE 'LFBK-BANKN(' int ')' INTO fnam.
 PERFORM bdc_field USING fnam
 wa_bank-bankn.
 CONCATENATE 'LFBK-KOINH(' int ')' INTO fnam.
 PERFORM bdc_field USING fnam
 wa_bank-koinh.
 CONCATENATE 'LFBK-BKONT(' int ')' INTO fnam.
 PERFORM bdc_field USING fnam
 wa_bank-bkont.
 CONCATENATE 'LFBK-BVTYP(' int ')' INTO fnam.
 PERFORM bdc_field USING fnam
 wa_bank-bvtyp.
 CONCATENATE 'LFBK-BKREF(' int ')' INTO fnam.
 PERFORM bdc_field USING fnam
 wa_bank-bkref.
 int = int + 1.
 ENDLOOP.
 PERFORM bdc_dynpro USING 'SAPMF02K' '0130'.
 PERFORM bdc_field USING 'BDC_CURSOR'
 'LFBK-BANKS(01)'.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '=ENTR'.
 PERFORM bdc_dynpro USING 'SAPMF02K' '0380'.
 PERFORM bdc_field USING 'BDC_CURSOR'
 'KNVK-PAFKT(05)'.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '=ENTR'.
 DATA : fnam1(20) TYPE c,
 cnt.
 cnt = 1.
 CLEAR : wa_cust.
 LOOP AT it_cust INTO wa_cust WHERE lifnr = wa_xk01-lifnr.
 CONCATENATE 'KNVK-NAMEV(' cnt ')' INTO fnam1.
 PERFORM bdc_field USING fnam1
 wa_cust-namev.
 CONCATENATE 'KNVK-NAME1(' cnt ')' INTO fnam1.
 PERFORM bdc_field USING fnam1
 wa_cust-name1.
 CONCATENATE 'KNVK-TELF1(' cnt ')' INTO fnam1.
 PERFORM bdc_field USING fnam1
 wa_cust-telf1.
 CONCATENATE 'KNVK-ABTNR(' cnt ')' INTO fnam1.
 PERFORM bdc_field USING fnam1
 wa_cust-abtnr.
 CONCATENATE 'KNVK-PAFKT(' cnt ')' INTO fnam1.
 PERFORM bdc_field USING fnam1
 wa_cust-pafkt.
 cnt = cnt + 1.
 ENDLOOP.
 PERFORM bdc_dynpro USING 'SAPMF02K' '0380'.
 PERFORM bdc_field USING 'BDC_CURSOR'
 'KNVK-NAMEV(01)'.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '=ENTR'.
 PERFORM bdc_dynpro USING 'SAPMF02K' '0210'.
 PERFORM bdc_field USING 'BDC_CURSOR'
 'LFB1-FRGRP'.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '/00'.
 PERFORM bdc_field USING 'LFB1-AKONT'
 wa_xk01-akont. " REC aCC
 PERFORM bdc_field USING 'LFB1-ZUAWA'
 wa_xk01-zuawa. " SORT KEY
 PERFORM bdc_field USING 'LFB1-LNRZE'
 wa_xk01-lnrze. " HEAD OFFICE
 PERFORM bdc_field USING 'LFB1-FDGRV'
 wa_xk01-fdgrv. " CASH MGMT GRP
 PERFORM bdc_field USING 'LFB1-FRGRP'
 wa_xk01-frgrp. " RELEASE GRP
 PERFORM bdc_field USING 'LFB1-CERDT'
 PERFORM bdc_dynpro USING 'SAPMF02K' '0215'.
 PERFORM bdc_field USING 'BDC_CURSOR'
 'LFB1-ZGRUP'.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '/00'.
 PERFORM bdc_field USING 'LFB1-ZTERM'
 wa_xk01-zterm. " PAYMENT TERMS'
 PERFORM bdc_field USING 'LFB1-TOGRU'
 wa_xk01-togru. " TOLERENCE GRP
 PERFORM bdc_field USING 'LFB1-REPRF'
 wa_xk01-reprf. " CHECK DOUBLE INV
 PERFORM bdc_field USING 'LFB1-ZWELS'
 wa_xk01-zwels. " PAYMENT METHOD
 PERFORM bdc_field USING 'LFB1-ZAHLS'
 wa_xk01-zahls. " PAYMENT BLOCK
 PERFORM bdc_field USING 'LFB1-HBKID'
 wa_xk01-hbkid. " HOUSE BANK
 PERFORM bdc_field USING 'LFB1-ZGRUP'
 wa_xk01-zgrup. " GROUPING KEY
 PERFORM bdc_dynpro USING 'SAPMF02K' '0220'.
 PERFORM bdc_field USING 'BDC_CURSOR'
 'LFB5-BUSAB'.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '/00'.
 PERFORM bdc_field USING 'LFB5-MAHNA'
 wa_xk01-mahna. " DUNN PROCEDURE
 PERFORM bdc_field USING 'LFB5-MANSP'
 wa_xk01-mansp. " DUNNING BLOCK
 PERFORM bdc_field USING 'LFB5-LFRMA'
 wa_xk01-lfrma. " Dunn representative
 PERFORM bdc_field USING 'LFB5-GMVDT'
 wa_xk01-gmvdt. " legal dunn proc
 PERFORM bdc_field USING 'LFB5-MADAT'
 wa_xk01-madat. " last dunned
 PERFORM bdc_field USING 'LFB5-MAHNS'
 wa_xk01-mahns. " dunn level
 PERFORM bdc_field USING 'LFB5-BUSAB'
 wa_xk01-busab. " dunning clerk
 PERFORM bdc_field USING 'LFB1-MGRUP'
 wa_xk01-mgrup. " grouping key
 CALL TRANSACTION 'XK01' USING it_bdcdata
 MODE 'A'.
ENDLOOP.
Start new screen *
FORM bdc_dynpro USING program dynpro.
CLEAR it_bdcdata.
it_bdcdata-program = program.
it_bdcdata-dynpro = dynpro.
it_bdcdata-dynbegin = 'X'.
APPEND it_bdcdata.
ENDFORM. "BDC_DYNPRO
Insert field
FORM bdc_field USING fnam fval TYPE any.
CLEAR it_bdcdata.
it_bdcdata-fnam = fnam.
it_bdcdata-fval = fval.
APPEND it_bdcdata.
ENDFORM. "bdc_field
*perform close_group.

How to handle table controls using LSMW

Hi All,
how to use LSMW to handle table control like header and item details eg. VA01 , ME21 etc. To handle these kind of trnasactions can we use LSMW instead BDC to upload data. Please let me know.
Thanks in advance.
Regards,
Kalpana

Hi Kalpana,
You can have your own custom programs for LSMW if the standard DI/BI IDOC , BAPI dont meet your requirements.
Its little bit complex. You need to register you custom program in table through SM30.
SDX0 - Program Definition ( BI or DI )
SDX1 - Program Assignment
SDX2 - Declaring Structures
SDX3 - Declaring field identifiers for structures
You can goto SM30 and can view the standard BI/DI programs definition by using the four digit Obejct Number...
AS

In BDC'S how to handle Table control

Hi,
 I want to know the concept and code for BDC's in Table control steps(MM01,VA01) and coding.Please its very Urgent.

Hi Raghavendra,
Go through this program mm01.
rePORT ymmbdcmm01
 NO STANDARD PAGE HEADING LINE-SIZE 255.
*& Table Declarations *
TABLES:rmmg1,makt,mara,mvke, marc,mbew,t100.
TYPE-POOLS: truxs.
DATA: it_raw TYPE truxs_t_text_data.
*& Data Declarations *
DATA:
 BEGIN OF t_data OCCURS 0,
 data TYPE string,
 END OF t_data.
DATA:BEGIN OF it_mess OCCURS 0,
msgtyp(5),
 lms(200),
 msgv1(50),
END OF it_mess.
DATA: BEGIN OF it_itab OCCURS 0,
 matnr TYPE rmmg1-matnr,
 mbrsh TYPE rmmg1-mbrsh,
 mtart TYPE rmmg1-mtart,
 werks TYPE rmmg1-werks,
 lgort TYPE rmmg1-lgort,
 vkorg TYPE rmmg1-vkorg,
 vtweg TYPE rmmg1-vtweg,
 maktx TYPE makt-maktx,
 meins TYPE mara-meins,
 matkl TYPE mara-matkl,
 spart TYPE mara-spart,
 GEWEI TYPE MARA-GEWEI,
 dwerk TYPE mvke-dwerk,
 versg TYPE mvke-versg,
 mtpos TYPE mvke-mtpos,
 mtvfp TYPE marc-mtvfp,
 tragr TYPE mara-tragr,
 ladgr TYPE marc-ladgr,
 sernp TYPE marc-sernp,
 txline(25), "added
 kordb ,
 mprof TYPE mara-mprof,
 ekgrp TYPE marc-ekgrp,
 dismm TYPE marc-dismm,
 dispo TYPE marc-dispo,
 disls TYPE marc-disls,
 mabst(13) TYPE c,
 beskz TYPE marc-beskz,
 sobsl TYPE marc-sobsl,
 lgpro TYPE marc-lgpro,
 dzeit TYPE c,
 plifz(3) TYPE c,
 webaz TYPE c,
 fhori TYPE marc-fhori,
 eisbe TYPE c,
 strgr(2) TYPE c,
 vrmod TYPE c,
 vint1(3),
 vint2(3),
 wzeit(3),
 sbdkz TYPE marc-sbdkz,
 bklas TYPE mbew-bklas,
 vprsv TYPE mbew-vprsv,
 verpr(11),
 peinh TYPE c,
 ekalr TYPE mbew-ekalr,
 losgr TYPE c,
 RGEKZ(1),
 fevor(3),
 END OF it_itab.
*decl of internal table of table control for BDCDATA & BDCMSGCOLL
DATA : BEGIN OF bdcdata OCCURS 0.
 INCLUDE STRUCTURE bdcdata.
DATA: END OF bdcdata.
DATA:it_msgtab TYPE STANDARD TABLE OF bdcmsgcoll WITH HEADER LINE,
 it_msgtab1 TYPE STANDARD TABLE OF bdcmsgcoll WITH HEADER LINE.
DATA : fld(50) TYPE c,
 cnt(2) TYPE n,
 l_mstring(150).
START-OF-SELECTION.
*& File uploading from xlsheet to sap *
CALL FUNCTION 'TEXT_CONVERT_XLS_TO_SAP'
 EXPORTING
 I_FIELD_SEPERATOR =
 i_line_header = 'X'
 i_tab_raw_data = it_raw
 i_filename = 'C:\Documents and Settings\sapthamm\Desktop\mm02.xls'
 TABLES
 i_tab_converted_data = it_itab
 EXCEPTIONS
 conversion_failed = 1
 OTHERS = 2.
IF sy-subrc <> 0.
 MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
*& Splitting the Internal Table *
LOOP AT t_data.
 SPLIT t_data-data AT cl_abap_char_utilities=>horizontal_tab INTO
 it_itab-matnr
 it_itab-mbrsh
 it_itab-mtart
 it_itab-werks
 it_itab-lgort
 it_itab-vkorg
 it_itab-vtweg
 it_itab-maktx
 it_itab-meins
 it_itab-matkl
 it_itab-spart
 it_itab-GEWEI
 it_itab-dwerk
 it_itab-versg
 it_itab-mtpos
 it_itab-mtvfp
 it_itab-tragr
 it_itab-ladgr
 it_itab-sernp
 it_itab-mprof
 it_itab-ekgrp
 it_itab-dismm
 it_itab-dispo
 it_itab-disls
 it_itab-mabst
 it_itab-beskz
 it_itab-sobsl
 it_itab-lgpro
 it_itab-dzeit
 it_itab-plifz
 it_itab-webaz
 it_itab-fhori
 it_itab-eisbe
 it_itab-strgr
 it_itab-vrmod
 it_itab-vint1
 it_itab-vint2
 it_itab-wzeit
 it_itab-sbdkz
 it_itab-bklas
 it_itab-vprsv
 it_itab-peinh
 it_itab-ekalr
 it_itab-losgr
 APPEND it_itab.
 CLEAR: it_itab,
 t_data-data.
ENDLOOP.
*perform open_dataset using dataset.
*perform open_group.
*do.
*read dataset dataset into it_itab.
*if sy-subrc <> 0. exit. endif.
*& it_itabing of Material Type-HALB *
LOOP AT it_itab.
 PERFORM bdc_dynpro USING 'SAPLMGMM' '0060'.
 PERFORM bdc_field USING 'BDC_CURSOR'
 'RMMG1-MATNR'.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '/00'.
 PERFORM bdc_field USING 'RMMG1-MATNR'
 it_itab-matnr.
 PERFORM bdc_field USING 'RMMG1-MBRSH'
 it_itab-mbrsh.
 PERFORM bdc_field USING 'RMMG1-MTART'
 it_itab-mtart.
 PERFORM bdc_dynpro USING 'SAPLMGMM' '0070'.
 PERFORM bdc_field USING 'BDC_CURSOR'
 'MSICHTAUSW-DYTXT(17)'.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '=P+'.
 PERFORM bdc_field USING 'MSICHTAUSW-KZSEL(01)'
 'X'.
 PERFORM bdc_field USING 'MSICHTAUSW-KZSEL(02)'
 'X'.
 PERFORM bdc_field USING 'MSICHTAUSW-KZSEL(04)'
 'X'.
 PERFORM bdc_field USING 'MSICHTAUSW-KZSEL(05)'
 'X'.
 PERFORM bdc_field USING 'MSICHTAUSW-KZSEL(06)'
 'X'.
 PERFORM bdc_field USING 'MSICHTAUSW-KZSEL(08)'
 'X'.
 PERFORM bdc_field USING 'MSICHTAUSW-KZSEL(09)'
 'X'.
 PERFORM bdc_field USING 'MSICHTAUSW-KZSEL(12)'
 'X'.
 PERFORM bdc_field USING 'MSICHTAUSW-KZSEL(13)'
 'X'.
 PERFORM bdc_field USING 'MSICHTAUSW-KZSEL(14)'
 'X'.
 PERFORM bdc_field USING 'MSICHTAUSW-KZSEL(15)'
 'X'.
 PERFORM bdc_field USING 'MSICHTAUSW-KZSEL(17)'
 'X'.
 PERFORM bdc_dynpro USING 'SAPLMGMM' '0070'.
 PERFORM bdc_field USING 'BDC_CURSOR'
 'MSICHTAUSW-DYTXT(09)'.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '=ENTR'.
 PERFORM bdc_field USING 'MSICHTAUSW-KZSEL(01)'
 'X'.
 PERFORM bdc_field USING 'MSICHTAUSW-KZSEL(02)'
 'X'.
 PERFORM bdc_field USING 'MSICHTAUSW-KZSEL(06)'
 'X'.
 PERFORM bdc_field USING 'MSICHTAUSW-KZSEL(07)'
 'X'.
 PERFORM bdc_field USING 'MSICHTAUSW-KZSEL(08)'
 'X'.
 PERFORM bdc_field USING 'MSICHTAUSW-KZSEL(09)'
 'X'.
 PERFORM bdc_dynpro USING 'SAPLMGMM' '0080'.
 PERFORM bdc_field USING 'BDC_CURSOR'
 'RMMG1-VTWEG'.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '=ENTR'.
 PERFORM bdc_field USING 'RMMG1-WERKS'
 it_itab-werks.
 PERFORM bdc_field USING 'RMMG1-LGORT'
 it_itab-lgort.
 PERFORM bdc_field USING 'RMMG1-VKORG'
 it_itab-vkorg.
 PERFORM bdc_field USING 'RMMG1-VTWEG'
 it_itab-vtweg.
 PERFORM bdc_dynpro USING 'SAPLMGMM' '4004'.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '/00'.
 PERFORM bdc_field USING 'MAKT-MAKTX'
 it_itab-maktx.
 PERFORM bdc_field USING 'BDC_CURSOR'
 'MARA-SPART'.
 PERFORM bdc_field USING 'MARA-MEINS'
 it_itab-meins.
 PERFORM bdc_field USING 'MARA-MATKL'
 it_itab-matkl.
 PERFORM bdc_field USING 'MARA-SPART'
 it_itab-spart.
 PERFORM bdc_field USING 'MARA-GEWEI'
 'kg'.
 PERFORM bdc_dynpro USING 'SAPLMGMM' '4004'.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '/00'.
 PERFORM bdc_field USING 'BDC_CURSOR'
 'MAKT-MAKTX'.
 PERFORM bdc_field USING 'MAKT-MAKTX'
 it_itab-maktx.
 PERFORM bdc_dynpro USING 'SAPLMGMM' '4000'.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '/00'.
 PERFORM bdc_field USING 'MAKT-MAKTX'
 it_itab-maktx.
 PERFORM bdc_field USING 'MARA-MEINS'
 it_itab-meins.
 PERFORM bdc_field USING 'MARA-SPART'
 it_itab-spart.
 PERFORM bdc_field USING 'MVKE-DWERK'
 it_itab-dwerk.
 PERFORM bdc_field USING 'MARA-MATKL'
 it_itab-matkl.
 PERFORM bdc_field USING 'MVKE-SKTOF'
 'X'.
 PERFORM bdc_field USING 'BDC_CURSOR'
 'MG03STEUER-TAXKM(02)'.
 PERFORM bdc_field USING 'MG03STEUER-TAXKM(01)'
 '0'.
 PERFORM bdc_field USING 'MG03STEUER-TAXKM(02)'
 '1'.
 PERFORM bdc_dynpro USING 'SAPLMGMM' '4200'.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '/00'.
*perform bdc_field using 'MAKT-MAKTX'
 it_itab-MAKTX_040.
*perform bdc_field using 'BDC_CURSOR'
 'MG03STEUER-TAXKM(05)'.
 PERFORM bdc_field USING 'MG03STEUER-TAXKM(03)'
 '1'.
 PERFORM bdc_field USING 'MG03STEUER-TAXKM(04)'
 '1'.
 PERFORM bdc_field USING 'MG03STEUER-TAXKM(05)'
 '0'.
 PERFORM bdc_dynpro USING 'SAPLMGMM' '4000'.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '/00'.
 PERFORM bdc_field USING 'BDC_CURSOR'
 'MAKT-MAKTX'.
 PERFORM bdc_field USING 'MAKT-MAKTX'
 it_itab-maktx.
 PERFORM bdc_field USING 'MARA-MEINS'
 it_itab-meins.
 PERFORM bdc_field USING 'MARA-SPART'
 it_itab-spart.
 PERFORM bdc_field USING 'MVKE-DWERK'
 it_itab-dwerk.
 PERFORM bdc_field USING 'MARA-MATKL'
 it_itab-matkl.
 PERFORM bdc_field USING 'MVKE-SKTOF'
 'X'.
 PERFORM bdc_dynpro USING 'SAPLMGMM' '4000'.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '/00'.
 PERFORM bdc_field USING 'MAKT-MAKTX'
 it_itab-maktx.
 PERFORM bdc_field USING 'BDC_CURSOR'
 'MVKE-MTPOS'.
 PERFORM bdc_field USING 'MVKE-VERSG'
 it_itab-versg.
 PERFORM bdc_field USING 'MVKE-MTPOS'
 it_itab-mtpos.
 PERFORM bdc_dynpro USING 'SAPLMGMM' '4000'.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '/00'.
 PERFORM bdc_field USING 'MAKT-MAKTX'
 it_itab-maktx.
 PERFORM bdc_field USING 'MARA-MEINS'
 it_itab-meins.
 PERFORM bdc_field USING 'MARA-GEWEI'
 'KG'.
 PERFORM bdc_field USING 'MARC-MTVFP'
 it_itab-mtvfp.
 PERFORM bdc_field USING 'MARA-TRAGR'
 it_itab-tragr.
 PERFORM bdc_field USING 'MARC-LADGR'
 it_itab-ladgr.
 PERFORM bdc_field USING 'BDC_CURSOR'
 'MARC-SERNP'.
 PERFORM bdc_field USING 'MARC-SERNP'
 it_itab-sernp.
 PERFORM bdc_dynpro USING 'SAPLMGMM' '4040'.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '=LTEX'.
 PERFORM bdc_field USING 'MAKT-MAKTX'
 it_itab-maktx.
 PERFORM bdc_dynpro USING 'SAPLSTXX' '1100'.
 PERFORM bdc_field USING 'BDC_CURSOR'
 'RSTXT-TXLINE(02)'.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '=TXVB'.
 PERFORM bdc_field USING 'RSTXT-TXLINE(02)'
 'pcb assembly'.
 PERFORM bdc_dynpro USING 'SAPLSTXX' '1100'.
 PERFORM bdc_field USING 'BDC_CURSOR'
 'RSTXT-TXLINE(02)'.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '=TXBA'.
 PERFORM bdc_dynpro USING 'SAPLMGMM' '4040'.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '=SP09'.
 PERFORM bdc_field USING 'MAKT-MAKTX'
 it_itab-maktx.
 PERFORM bdc_dynpro USING 'SAPLMGMM' '4000'.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '/00'.
 PERFORM bdc_field USING 'MAKT-MAKTX'
 it_itab-maktx.
 PERFORM bdc_field USING 'MARA-MEINS'
 it_itab-meins.
 PERFORM bdc_field USING 'MARC-EKGRP'
 it_itab-ekgrp.
 PERFORM bdc_field USING 'MARA-MATKL'
 it_itab-matkl.
 PERFORM bdc_field USING 'MARC-KORDB'
 'X'.
 PERFORM bdc_field USING 'BDC_CURSOR'
 'MARA-MPROF'.
 PERFORM bdc_field USING 'MARA-MPROF'
 it_itab-mprof.
 PERFORM bdc_dynpro USING 'SAPLMGMM' '4000'.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '/00'.
 PERFORM bdc_field USING 'MAKT-MAKTX'
 it_itab-maktx.
 PERFORM bdc_field USING 'MARA-MEINS'
 it_itab-meins.
 PERFORM bdc_field USING 'MARC-EKGRP'
 it_itab-ekgrp.
 PERFORM bdc_field USING 'MARC-DISMM'
 it_itab-dismm.
 PERFORM bdc_field USING 'MARC-DISPO'
 it_itab-dispo.
 PERFORM bdc_field USING 'BDC_CURSOR'
 'MARC-MABST'.
 PERFORM bdc_field USING 'MARC-DISLS'
 it_itab-disls.
 PERFORM bdc_field USING 'MARC-MABST'
 it_itab-mabst.
 PERFORM bdc_dynpro USING 'SAPLMGMM' '4000'.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '/00'.
 PERFORM bdc_field USING 'MAKT-MAKTX'
 it_itab-maktx.
 PERFORM bdc_field USING 'MARC-BESKZ'
 it_itab-beskz.
 PERFORM bdc_field USING 'MARC-SOBSL'
 it_itab-sobsl.
 PERFORM bdc_field USING 'MARC-LGPRO'
 it_itab-lgpro.
 if it_itab-sernp = 'TJSL'.
 PERFORM bdc_field USING 'MARC-RGEKZ'
 ELSE.
 PERFORM bdc_field USING 'MARC-RGEKZ'
 '1'.
 ENDIF.
 PERFORM bdc_field USING 'MARC-DZEIT'
 it_itab-dzeit.
 PERFORM bdc_field USING 'MARC-PLIFZ'
 it_itab-plifz.
 PERFORM bdc_field USING 'MARC-WEBAZ'
 it_itab-webaz.
 PERFORM bdc_field USING 'MARC-FHORI'
 it_itab-fhori.
 PERFORM bdc_field USING 'MARC-EISBE'
 it_itab-eisbe.
 PERFORM bdc_dynpro USING 'SAPLMGMM' '4000'.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '/00'.
 PERFORM bdc_field USING 'MAKT-MAKTX'
 it_itab-maktx.
 PERFORM bdc_field USING 'MARC-PERKZ'
 'M'.
 PERFORM bdc_field USING 'MARC-STRGR'
 it_itab-strgr.
 PERFORM bdc_field USING 'MARC-VRMOD'
 it_itab-vrmod.
 PERFORM bdc_field USING 'MARC-VINT1'
 it_itab-vint1.
 PERFORM bdc_field USING 'MARC-VINT2'
 it_itab-vint2.
 PERFORM bdc_field USING 'BDC_CURSOR'
 'MARC-WZEIT'.
 PERFORM bdc_field USING 'MARC-MTVFP'
 it_itab-mtvfp.
 PERFORM bdc_field USING 'MARC-WZEIT'
 it_itab-wzeit.
 PERFORM bdc_dynpro USING 'SAPLMGMM' '4000'.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '/00'.
 PERFORM bdc_field USING 'MAKT-MAKTX'
 it_itab-maktx.
 PERFORM bdc_field USING 'BDC_CURSOR'
 'MARC-SBDKZ'.
 PERFORM bdc_field USING 'MARC-SBDKZ'
 it_itab-sbdkz.
 PERFORM bdc_dynpro USING 'SAPLMGMM' '4000'.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '/00'.
 PERFORM bdc_field USING 'BDC_CURSOR'
 'MAKT-MAKTX'.
 PERFORM bdc_field USING 'MAKT-MAKTX'
 it_itab-maktx.
 PERFORM bdc_field USING 'MARA-MEINS'
 it_itab-meins.
 PERFORM bdc_field USING 'MARC-FEVOR'
 '001'.
 PERFORM bdc_field USING 'MARC-LGPRO'
 it_itab-lgpro.
 PERFORM bdc_field USING 'MARC-SERNP'
 it_itab-sernp.
 PERFORM bdc_field USING 'MARC-DZEIT'
 it_itab-dzeit.
 PERFORM bdc_dynpro USING 'SAPLMGMM' '4000'.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '/00'.
 PERFORM bdc_field USING 'BDC_CURSOR'
 'MAKT-MAKTX'.
 PERFORM bdc_field USING 'MAKT-MAKTX'
 it_itab-maktx.
 PERFORM bdc_field USING 'MARA-MEINS'
 it_itab-meins.
*perform bdc_field using 'MARA-IPRKZ'
 it_itab-IPRKZ.
 PERFORM bdc_dynpro USING 'SAPLMGMM' '4000'.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '/00'.
 PERFORM bdc_field USING 'BDC_CURSOR'
 'MAKT-MAKTX'.
 PERFORM bdc_field USING 'MAKT-MAKTX'
 it_itab-maktx.
 PERFORM bdc_field USING 'MARA-GEWEI'
 'KG'.
 PERFORM bdc_field USING 'MARC-SERNP'
 it_itab-sernp.
 PERFORM bdc_dynpro USING 'SAPLMGMM' '4000'.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '/00'.
 PERFORM bdc_field USING 'MAKT-MAKTX'
 it_itab-maktx.
 PERFORM bdc_field USING 'MARA-MEINS'
 it_itab-meins.
 PERFORM bdc_field USING 'MARA-SPART'
 it_itab-spart.
 PERFORM bdc_field USING 'BDC_CURSOR'
 'MBEW-VPRSV'.
 PERFORM bdc_field USING 'MBEW-BKLAS'
 it_itab-bklas.
*perform bdc_field using 'MBEW-EKLAS'
 it_itab-EKLAS.
 PERFORM bdc_field USING 'MBEW-VPRSV'
 'v'.
 PERFORM bdc_field USING 'MBEW-PEINH'
 '1'.
perform bdc_field using 'MBEW-VERPR'
 it_itab-VERPR.
 PERFORM bdc_dynpro USING 'SAPLMGMM' '4000'.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '/00'.
 PERFORM bdc_field USING 'BDC_CURSOR'
 'MAKT-MAKTX'.
 PERFORM bdc_field USING 'MAKT-MAKTX'
 it_itab-maktx.
 PERFORM bdc_dynpro USING 'SAPLMGMM' '4000'.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '/00'.
 PERFORM bdc_field USING 'BDC_CURSOR'
 'MAKT-MAKTX'.
 PERFORM bdc_field USING 'MAKT-MAKTX'
 it_itab-maktx.
 PERFORM bdc_field USING 'MARA-MEINS'
 it_itab-meins.
 PERFORM bdc_field USING 'MBEW-EKALR'
 'X'.
 PERFORM bdc_field USING 'MARC-AWSLS'
 '000001'.
 PERFORM bdc_field USING 'MARC-LOSGR'
 '1'.
 PERFORM bdc_dynpro USING 'SAPLMGMM' '4000'.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '/00'.
 PERFORM bdc_field USING 'MAKT-MAKTX'
 it_itab-maktx.
 PERFORM bdc_field USING 'BDC_CURSOR'
 'MBEW-ZPLPR'.
*perform bdc_field using 'MBEW-ZPLPR'
 '6000'.
 PERFORM bdc_field USING 'MBEW-BKLAS'
 it_itab-bklas.
 PERFORM bdc_field USING 'MBEW-VPRSV'
 'V'.
 PERFORM bdc_field USING 'MBEW-PEINH'
 '1'.
 PERFORM bdc_dynpro USING 'SAPLSPO1' '0300'.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '=YES'.
 CALL TRANSACTION 'MM01' USING bdcdata MODE 'A'
 UPDATE 'S'
 MESSAGES INTO it_msgtab.
 CLEAR bdcdata[].
 CLEAR it_itab.
PERFORM error.
ENDLOOP.
*& Declaration of Error Handling *
 i
 it_msgtab1-msgv1 = it_msgtab-msgv1.
 it_msgtab1-msgv2 = it_msgtab-msgv2.
 it_msgtab1-msgv3 = it_msgtab-msgv3.
 APPEND it_msgtab1.
ENDLOOP.
download error message to a file by using function module
CALL FUNCTION 'GUI_DOWNLOAD'
 EXPORTING
 BIN_FILESIZE =
 filename = 'C:\Documents and Settings\sapthamm\Desktop\error.xls'
 filetype = 'ASC'
 APPEND = ' '
 write_field_separator = 'X'
 HEADER = '00'
 TRUNC_TRAILING_BLANKS = ' '
 WRITE_LF = 'X'
 COL_SELECT = ' '
 COL_SELECT_MASK = ' '
 DAT_MODE = ' '
 CONFIRM_OVERWRITE = ' '
 NO_AUTH_CHECK = ' '
 CODEPAGE = ' '
 IGNORE_CERR = ABAP_TRUE
 REPLACEMENT = '#'
 WRITE_BOM = ' '
 TRUNC_TRAILING_BLANKS_EOL = 'X'
 WK1_N_FORMAT = ' '
 WK1_N_SIZE = ' '
 WK1_T_FORMAT = ' '
 WK1_T_SIZE = ' '
 WRITE_EOL = ABAP_TRUE
IMPORTING
 FILELENGTH =
 TABLES
 data_tab = it_mess
 FIELDNAMES =
EXCEPTIONS
 FILE_WRITE_ERROR = 1
 NO_BATCH = 2
 GUI_REFUSE_FILETRANSFER = 3
 INVALID_TYPE = 4
 NO_AUTHORITY = 5
 UNKNOWN_ERROR = 6
 HEADER_NOT_ALLOWED = 7
 SEPARATOR_NOT_ALLOWED = 8
 FILESIZE_NOT_ALLOWED = 9
 HEADER_TOO_LONG = 10
 DP_ERROR_CREATE = 11
 DP_ERROR_SEND = 12
 DP_ERROR_WRITE = 13
 UNKNOWN_DP_ERROR = 14
 ACCESS_DENIED = 15
 DP_OUT_OF_MEMORY = 16
 DISK_FULL = 17
 DP_TIMEOUT = 18
 FILE_NOT_FOUND = 19
 DATAPROVIDER_EXCEPTION = 20
 CONTROL_FLUSH_ERROR = 21
 OTHERS = 22
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*& Form BDC_DYNPRO
 text
 -->PROGRAM text
 -->DYNPRO text
FORM bdc_dynpro USING program dynpro.
CLEAR bdcdata.
bdcdata-program = program.
bdcdata-dynpro = dynpro.
bdcdata-dynbegin = 'X'.
APPEND bdcdata.
ENDFORM. "BDC_DYNPRO
 Insert field *
FORM bdc_field USING fnam fval.
IF FVAL <> .
CLEAR bdcdata.
bdcdata-fnam = fnam.
bdcdata-fval = fval.
APPEND bdcdata.
ENDIF.
ENDFORM. "BDC_FIELD
form error.
LOOP AT it_msgtab.
 IF it_msgtab-msgtyp = 'E'.
 SELECT SINGLE * FROM t100 WHERE sprsl = it_msgtab-msgspra
 AND arbgb = it_msgtab-msgid
 AND msgnr = it_msgtab-msgnr.
 IF sy-subrc = 0.
 l_mstring = t100-text.
 IF l_mstring CS '&1'.
 REPLACE '&1' WITH it_msgtab-msgv1 INTO l_mstring.
 REPLACE '&2' WITH it_msgtab-msgv2 INTO l_mstring.
 REPLACE '&3' WITH it_msgtab-msgv3 INTO l_mstring.
 REPLACE '&4' WITH it_msgtab-msgv4 INTO l_mstring.
 ELSE.
 REPLACE '&' WITH it_msgtab-msgv1 INTO l_mstring.
 REPLACE '&' WITH it_msgtab-msgv2 INTO l_mstring.
 REPLACE '&' WITH it_msgtab-msgv3 INTO l_mstring.
 REPLACE '&' WITH it_msgtab-msgv4 INTO l_mstring.
 ENDIF.
 CONDENSE l_mstring.
 it_mess-msgtyp = it_msgtab-msgtyp.
 it_mess-lms = l_mstring.
 it_mess-msgv1 = it_msgtab-msgv1.
 APPEND it_mess.
 WRITE: / it_msgtab-msgtyp, l_mstring(150).
 ELSE.
 WRITE: / it_msgtab.
 it_mess-msgtyp = it_msgtab-msgtyp.
 it_mess-lms = l_mstring.
 it_mess-msgv1 = it_msgtab-msgv1.
 APPEND it_mess.
 ENDIF.
 ENDIF.
ENDLOOP.
ENDFORM.
LOOP AT it_msgtab.
Rewords some points.
rgds,
P.Naganjana reddy

Handling Table control in BDC

I am doing BC for transaction KKPA with session method. I am filling the table control by using two internal tables IT_STPO and IT_ZCOT. I have prepared the logic and able to move the data to table control. But I am unable to handle when it more records. Generally we will use page down event (=p+) to handle this. As I am new to this, Please advise me how to go ahead.
Here I am pasting the code with valid comment. Please correct it and reply me.
*-Table control SCREEN 1301 started.
 PERFORM BDC_DYNPRO USING 'SAPLKKDI' '1301'.
 perform bdc_field using 'BDC_CURSOR'
 'RK70L-MENGE(01)'.
 perform bdc_field using 'BDC_OKCODE'
 '/00'.
 perform bdc_field using 'RK70E-LST_SETNR'
 ' 1'.
*-To move the first record to table control
 MOVE 1 TO Y_CNT.
*-Here we are moving activity type M data from internal table IT_STPO.
*-Move the BDC data only for activity type M
 LOOP AT IT_STPO INTO WA_STPO.
*-To move to the first screen
 CLEAR: Y_REM, Y_MOD.
 IF Y_CNT gt 10.
 Y_REM := Y_CNT / 10.
 Y_MOD := Y_CNT mod 10.
 IF ( Y_REM EQ 1 ) AND ( Y_MOD eq 1 ).
 perform bdc_dynpro using 'SAPLKKDI'
 '1301'.
 perform bdc_field using 'BDC_OKCODE'
 '=P+'.
 ENDIF.
 IF ( Y_REM gt 0 ) AND ( Y_MOD eq 1 ).
 perform bdc_field using 'RK70E-LST_SETNR'
 ' 1'.
 ENDIF.
 ENDIF.
*-For feild typps
 CONCATENATE 'RK70L-TYPPS(' Y_CNT ')' INTO Y_FNAM.
 PERFORM BDC_FIELD USING Y_FNAM
 C_M.
 CONCATENATE 'RK70L-HERK2(' Y_CNT ')' INTO Y_FNAM.
 PERFORM BDC_FIELD USING Y_FNAM
 WA_STPO-COMPONENT.
 CONCATENATE 'RK70L-HERK3(' Y_CNT ')' INTO Y_FNAM.
 PERFORM BDC_FIELD USING Y_FNAM
 WA_KEKO_DATA-WERKS.
*-Qunatity conversion
 WRITE: WA_STPO-COMP_QTY TO Y_COMP_QTY.
 CONCATENATE 'RK70L-MENGE(' Y_CNT ')' INTO Y_FNAM.
 PERFORM BDC_FIELD USING Y_FNAM
 Y_COMP_QTY.
 Y_CNT = Y_CNT + 1.
 CLEAR: WA_STPO.
 ENDLOOP.
 CLEAR : Y_CNT, Y_FNAM.
 DESCRIBE TABLE IT_STPO LINES Y_CNT.
 Y_CNT = Y_CNT + 1.
*-Here we are moving activity type M data from internal table IT_STPO.
*-Move the BDC data only for activity type M
 LOOP AT IT_ZCOT INTO WA_ZCOT.
*-Check the type of activity
 IF WA_ZCOT-TYPPS EQ C_E.
*- if type of activity 'E'
 CONCATENATE 'RK70L-TYPPS(' Y_CNT ')' INTO Y_FNAM.
 PERFORM BDC_FIELD USING Y_FNAM
 C_E.
 CONCATENATE 'RK70L-HERK2(' Y_CNT ')' INTO Y_FNAM.
 PERFORM BDC_FIELD USING Y_FNAM
 WA_ZCOT-KOSTL.
 CONCATENATE 'RK70L-HERK3(' Y_CNT ')' INTO Y_FNAM.
 PERFORM BDC_FIELD USING Y_FNAM
 WA_ZCOT-LSTAR.
 WRITE WA_ZCOT-MENGE TO Y_QUANT_CHAR.
 CONCATENATE 'RK70L-MENGE(' Y_CNT ')' INTO Y_FNAM.
 PERFORM BDC_FIELD USING Y_FNAM
 Y_QUANT_CHAR.
 ENDIF.
*- if type of activity 'V'
 IF WA_ZCOT-TYPPS EQ C_V.
 CLEAR: Y_QUANT_CHAR.
 CONCATENATE 'RK70L-TYPPS(' Y_CNT ')' INTO Y_FNAM.
 PERFORM BDC_FIELD USING Y_FNAM
 C_V.
 CONCATENATE 'RK70L-KSTAR(' Y_CNT ')' INTO Y_FNAM.
 PERFORM BDC_FIELD USING Y_FNAM
 WA_ZCOT-KSTAR.
 WRITE WA_ZCOT0001_DATA-MENGE TO Y_QUANT_CHAR.
 CONCATENATE 'RK70L-MENGE(' Y_CNT ')' INTO Y_FNAM.
 PERFORM BDC_FIELD USING Y_FNAM
 WA_ZCOT-MENGE.
 CONCATENATE 'RK70L-LPREIS(' Y_CNT ')' INTO Y_FNAM.
 PERFORM BDC_FIELD USING Y_FNAM
 WA_ZCOT-LPEINH.
 ENDIF.
 Y_CNT = Y_CNT + 1.
 CLEAR: WA_ZCOT.
 ENDLOOP.
 perform bdc_dynpro using 'SAPLKKDI' '1301'.
 perform bdc_field using 'BDC_CURSOR'
 'RK70L-LPREIS(04)'.
 perform bdc_field using 'BDC_OKCODE'
 '=SICH'.
 perform bdc_field using 'RK70E-LST_SETNR'
As of now I am trying to handle the same in the internal table IT_STPO, so please correct the code in the loop IT_STPO and advise how to handle with other internal table also.
Many Thanks,
Raghyu.

Hi,
the insert button code is =POAN.
TYPE-POOLS: truxs.
TABLES: t100.
TYPES: BEGIN OF bdc.
INCLUDE TYPE bdcdata.
TYPES: END OF bdc.
TYPES: BEGIN OF ty_itab,
 project_id TYPE dpr_project-project_id,
 aufnr TYPE aufk-aufnr,
 vbeln TYPE vbak-vbeln,
 auart TYPE vbak-auart,
 matnr TYPE vbap-matnr,
 zieme TYPE vbap-zieme,
 kschl TYPE konv-kschl,
 kbetr(13),
 bemot TYPE vbap-bemot,
 zmeng(13),
 mvgr5 TYPE vbap-mvgr5,
 zzpernr TYPE vbap-zzpernr,
 htext1(72),
 htext2(72),
 END OF ty_itab.
TYPES: BEGIN OF ty_item,
 matnr TYPE vbap-matnr,
 zmeng(13),
 zieme TYPE vbap-zieme,
 mvgr5 TYPE vbap-mvgr5,
 aufnr TYPE aufk-aufnr,
 zzpernr TYPE vbap-zzpernr,
 bemot TYPE vbap-bemot,
 arktx TYPE vbap-arktx,
 kschl TYPE konv-kschl,
 kbetr(13),
 END OF ty_item.
TYPES: BEGIN OF ty_pa0001,
 pernr TYPE persno,
 ename TYPE pa0001-ename,
 END OF ty_pa0001.
DATA: it_pa0001 TYPE TABLE OF ty_pa0001,
 wa_pa0001 TYPE ty_pa0001.
DATA: itab TYPE STANDARD TABLE OF ty_itab,
 item TYPE TABLE OF ty_item,
 wa_item TYPE ty_item,
 wa_itab TYPE ty_itab.
DATA: bdcdata TYPE TABLE OF bdc,
 wa_bdc TYPE bdc.
DATA: mode TYPE c.
DATA: message TYPE TABLE OF bdcmsgcoll,
 wa_message TYPE bdcmsgcoll.
DATA : count(2) TYPE n.
DATA : index(2) TYPE n.
DATA: it_raw TYPE truxs_t_text_data.
DATA: lv_werks TYPE vbap-werks.
DATA: lv_vbeln(10) TYPE n.
DATA: l_mstring(480).
DATA: l_pernr(10) TYPE c.
FIELD-SYMBOLS : <fs_itab> TYPE ty_itab.
SELECTION-SCREEN: BEGIN OF BLOCK b1 WITH FRAME.
PARAMETERS: p_file TYPE rlgrap-filename,
 rb1 RADIOBUTTON GROUP g1,
 rb3 RADIOBUTTON GROUP g1.
SELECTION-SCREEN: SKIP 2,
 COMMENT 1(79) text-001.
SELECTION-SCREEN: END OF BLOCK b1.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
CALL FUNCTION 'F4_FILENAME'
 EXPORTING
 field_name = 'P_FILE'
 IMPORTING
 file_name = p_file.
START-OF-SELECTION.
CALL FUNCTION 'TEXT_CONVERT_XLS_TO_SAP'
 EXPORTING
 i_line_header = 'X'
 i_tab_raw_data = it_raw " WORK TABLE
 i_filename = p_file
 TABLES
 i_tab_converted_data = itab[] "ACTUAL DATA
 EXCEPTIONS
 conversion_failed = 1
 OTHERS = 2.
IF sy-subrc <> 0.
 MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
* CALL FUNCTION 'WS_UPLOAD'
* EXPORTING
** CODEPAGE = ' '
* filename = p_file
* filetype = 'DAT'
** HEADLEN = ' '
** LINE_EXIT = ' '
** TRUNCLEN = ' '
** USER_FORM = ' '
** USER_PROG = ' '
** DAT_D_FORMAT = ' '
** IMPORTING
** FILELENGTH =
* TABLES
* data_tab = itab[]
* EXCEPTIONS
* conversion_error = 1
* file_open_error = 2
* file_read_error = 3
* invalid_type = 4
* no_batch = 5
* unknown_error = 6
* invalid_table_width = 7
* gui_refuse_filetransfer = 8
* customer_error = 9
* no_authority = 10
* OTHERS = 11
* IF sy-subrc <> 0.
* MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
* WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
* ENDIF.
** PERFORM open_group.
CLEAR :lv_werks,lv_vbeln.
READ TABLE itab INTO wa_itab INDEX 1.
IF sy-subrc = 0.
 lv_vbeln = wa_itab-vbeln.
 SELECT SINGLE werks
 FROM vbap
 INTO lv_werks
 WHERE vbeln = lv_vbeln.
ENDIF.
IF itab[] IS NOT INITIAL.
 REFRESH: it_pa0001.
 SELECT pernr ename
 FROM pa0001
 INTO TABLE it_pa0001
 FOR ALL ENTRIES IN itab
 WHERE pernr = itab-zzpernr.
* AND begda <= sy-datum
* AND endda >= sy-datum.
ENDIF.
LOOP AT itab INTO wa_itab.
 MOVE-CORRESPONDING wa_itab TO wa_item.
 CLEAR wa_pa0001.
 READ TABLE it_pa0001 INTO wa_pa0001 WITH KEY
 pernr = wa_item-zzpernr.
 IF sy-subrc = 0.
 wa_item-arktx = wa_pa0001-ename.
 ENDIF.
 APPEND wa_item TO item.
 CLEAR wa_item.
ENDLOOP.
READ TABLE itab INTO wa_itab INDEX 1.
PERFORM bdc_dynpro USING 'SAPMV45A' '0101'.
PERFORM bdc_field USING 'BDC_CURSOR'
 'VBAK-AUART'.
PERFORM bdc_field USING 'BDC_OKCODE'
 '=COPY'.
PERFORM bdc_field USING 'VBAK-AUART'
 wa_itab-auart.
PERFORM bdc_dynpro USING 'SAPLV45C' '0100'.
PERFORM bdc_field USING 'BDC_OKCODE'
 '=REF1'.
PERFORM bdc_field USING 'BDC_CURSOR'
 'LV45C-VBELN'.
PERFORM bdc_field USING 'LV45C-VBELN'
 wa_itab-vbeln.
PERFORM bdc_dynpro USING 'SAPLV45C' '0100'.
PERFORM bdc_field USING 'BDC_OKCODE'
 '=REF1'.
PERFORM bdc_field USING 'BDC_CURSOR'
 'LV45C-VBELN'.
PERFORM bdc_field USING 'LV45C-VBELN'
 wa_itab-vbeln.
PERFORM bdc_dynpro USING 'SAPLV45C' '0100'.
PERFORM bdc_field USING 'BDC_OKCODE'
 '=UEBR'.
PERFORM bdc_dynpro USING 'SAPMV45A' '4001'.
PERFORM bdc_field USING 'BDC_OKCODE'
 '=KTEX_SUB'.
PERFORM bdc_dynpro USING 'SAPMV45A' '4002'.
PERFORM bdc_field USING 'BDC_OKCODE'
 '=TP_DELETE'.
PERFORM bdc_dynpro USING 'SAPMV45A' '4002'.
PERFORM bdc_field USING 'BDC_OKCODE'
 '=TP_CREATE'.
PERFORM bdc_field USING 'LV70T-SPRAS'
 sy-langu.
PERFORM bdc_dynpro USING 'SAPMV45A' '4002'.
PERFORM bdc_field USING 'BDC_OKCODE'
 '=TP_DETAIL'.
PERFORM bdc_field USING 'LV70T-SPRAS'
 sy-langu.
PERFORM bdc_dynpro USING 'SAPLSTXX' '1100'.
PERFORM bdc_field USING 'BDC_CURSOR'
 'RSTXT-TXLINE(02)'.
PERFORM bdc_field USING 'BDC_OKCODE'
 '=TXVB'.
PERFORM bdc_field USING 'RSTXT-TXPARGRAPH(02)'
PERFORM bdc_field USING 'RSTXT-TXPARGRAPH(03)'
PERFORM bdc_field USING 'RSTXT-TXLINE(02)'
 wa_itab-htext1.
PERFORM bdc_field USING 'RSTXT-TXLINE(03)'
 wa_itab-htext2.
PERFORM bdc_dynpro USING 'SAPLSTXX' '1100'.
PERFORM bdc_field USING 'BDC_CURSOR'
 'RSTXT-TXLINE(02)'.
PERFORM bdc_field USING 'BDC_OKCODE'
 '=TXBA'.
PERFORM bdc_dynpro USING 'SAPMV45A' '4002'.
PERFORM bdc_field USING 'BDC_OKCODE'
 '/EBACK'.
CLEAR index.
DATA: line TYPE i.
DESCRIBE TABLE item LINES line.
LOOP AT item INTO wa_item.
 index = index + 1.
 PERFORM bdc_dynpro USING 'SAPMV45A' '4001'.
 IF index = 1.
 PERFORM bdc_field USING 'VBAP-ZMENG(01)'
 wa_itab-zmeng.
 PERFORM bdc_field USING 'VBAP-ZIEME(01)'
 wa_itab-zieme.
 PERFORM bdc_field USING 'VBAP-ARKTX(01)'
 wa_item-arktx.
 IF wa_itab-mvgr5 IS NOT INITIAL.
 PERFORM bdc_field USING 'VBAP-MVGR5(01)'
 wa_itab-mvgr5.
 ENDIF.
 PERFORM bdc_field USING 'VBAP-AUFNR(01)'
 wa_itab-aufnr.
 PERFORM bdc_field USING 'VBAP-WERKS(01)'
 lv_werks.
 ELSE.
 IF index < line.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '=POAN'.
 ENDIF.
 PERFORM bdc_field USING 'RV45A-MABNR(02)'
 wa_item-matnr.
 PERFORM bdc_field USING 'VBAP-ZMENG(02)'
 wa_item-zmeng.
 PERFORM bdc_field USING 'VBAP-ZIEME(02)'
 wa_item-zieme.
 IF wa_item-mvgr5 IS NOT INITIAL.
 PERFORM bdc_field USING 'VBAP-MVGR5(02)'
 wa_item-mvgr5.
 ENDIF.
 PERFORM bdc_field USING 'VBAP-ARKTX(02)'
 wa_item-arktx.
 PERFORM bdc_field USING 'VBAP-AUFNR(02)'
 wa_item-aufnr.
 PERFORM bdc_field USING 'VBAP-WERKS(02)'
 lv_werks.
 ENDIF.
ENDLOOP.
PERFORM bdc_dynpro USING 'SAPMV45A' '4001'.
PERFORM bdc_field USING 'BDC_OKCODE'
 '=ITEM'.
PERFORM bdc_field USING 'BDC_CURSOR'
 'RV45A-MABNR(02)'.
PERFORM bdc_dynpro USING 'SAPMV45A' '4003'.
PERFORM bdc_field USING 'BDC_OKCODE'
 '=T05'.
PERFORM bdc_dynpro USING 'SAPMV45A' '5003'.
PERFORM bdc_field USING 'BDC_OKCODE'
 '=POS1'.
CLEAR index.
LOOP AT item INTO wa_item.
 index = index + 1.
 IF index = 1.
 PERFORM bdc_field USING 'BDC_CURSOR'
 'KOMV-KSCHL(01)'.
 PERFORM bdc_dynpro USING 'SAPMV45A' '5003'.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '=POS+'.
 PERFORM bdc_field USING 'BDC_CURSOR'
 'KOMV-KBETR(01)'.
 PERFORM bdc_field USING 'KOMV-KBETR(01)'
 wa_item-kbetr.
 ELSE.
 PERFORM bdc_dynpro USING 'SAPMV45A' '5003'.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '=V69A_KOAN'.
 PERFORM bdc_field USING 'BDC_CURSOR'
 'KOMV-KSCHL(01)'.
 PERFORM bdc_dynpro USING 'SAPMV45A' '5003'.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '=POS+'.
 PERFORM bdc_field USING 'BDC_CURSOR'
 'KOMV-KBETR(02)'.
 PERFORM bdc_field USING 'KOMV-KSCHL(02)'
 wa_item-kschl.
 PERFORM bdc_field USING 'KOMV-KBETR(02)'
 wa_item-kbetr.
 ENDIF.
ENDLOOP.
PERFORM bdc_dynpro USING 'SAPMV45A' '5003'.
PERFORM bdc_field USING 'BDC_OKCODE'
 '/EBACK'.
PERFORM bdc_field USING 'BDC_CURSOR'
 'KOMV-KSCHL(03)'.
PERFORM bdc_dynpro USING 'SAPMV45A' '4001'.
PERFORM bdc_field USING 'BDC_OKCODE'
 '=FEAZ'.
LOOP AT item INTO wa_item.
 PERFORM bdc_dynpro USING 'SAPLSLVC_FULLSCREEN' '0500'.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '=FEBE'.
 PERFORM bdc_dynpro USING 'SAPMV45A' '4003'.
* PERFORM bdc_field USING 'BDC_OKCODE'
* '=FEWE'.
 PERFORM bdc_field USING 'BDC_CURSOR'
 'VBAP-BEMOT'.
 CLEAR l_pernr.
 l_pernr = wa_item-zzpernr.
 CONDENSE l_pernr.
 PERFORM bdc_field USING 'VBAP-ZZPERNR'
 wa_item-zzpernr.
 PERFORM bdc_field USING 'VBAP-BEMOT'
 wa_item-bemot.
 PERFORM bdc_dynpro USING 'SAPMV45A' '4003'.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '=FEWE'.
ENDLOOP.
PERFORM bdc_dynpro USING 'SAPMV45A' '4001'.
PERFORM bdc_field USING 'BDC_OKCODE'
 '=SICH'.
IF rb1 = 'X'.
 mode = 'A'.
ELSEIF rb3 = 'X'.
 mode = 'E'.
ENDIF.
CALL TRANSACTION 'VA01' USING bdcdata
 MODE mode
 UPDATE 'A'
 MESSAGES INTO message.
LOOP AT message INTO wa_message.
 SELECT SINGLE * FROM t100 WHERE sprsl = wa_message-msgspra
 AND arbgb = wa_message-msgid
 AND msgnr = wa_message-msgnr.
 IF sy-subrc = 0.
 l_mstring = t100-text.
 IF l_mstring CS '&1'.
 REPLACE '&1' WITH wa_message-msgv1 INTO l_mstring.
 REPLACE '&2' WITH wa_message-msgv2 INTO l_mstring.
 REPLACE '&3' WITH wa_message-msgv3 INTO l_mstring.
 REPLACE '&4' WITH wa_message-msgv4 INTO l_mstring.
 ELSE.
 REPLACE '&' WITH wa_message-msgv1 INTO l_mstring.
 REPLACE '&' WITH wa_message-msgv2 INTO l_mstring.
 REPLACE '&' WITH wa_message-msgv3 INTO l_mstring.
 REPLACE '&' WITH wa_message-msgv4 INTO l_mstring.
 ENDIF.
 CONDENSE l_mstring.
 WRITE: / wa_message-msgtyp, l_mstring(250).
 ELSE.
 WRITE: / wa_message.
 ENDIF.
ENDLOOP.
*& Form bdc_dynpro
* text
* -->PROGRAM text
* -->DYNPRO text
FORM bdc_dynpro USING program dynpro.
CLEAR wa_bdc.
wa_bdc-program = program.
wa_bdc-dynpro = dynpro.
wa_bdc-dynbegin = 'X'.
APPEND wa_bdc TO bdcdata.
ENDFORM. " bdc_dynpro
*& Form bdc_field
FORM bdc_field USING fnam fval.
CLEAR wa_bdc.
wa_bdc-fnam = fnam.
wa_bdc-fval = fval.
APPEND wa_bdc TO bdcdata.
ENDFORM. " bdc_field
regards,
Santosh Thorat

How to handle table control in PO change

Hi All,
R/3 is sending PO details and Vendor is using third party front end to access the PO.He has changed the PO and these changes need to be reflected in the PO. Data is coming from external sytem to R/3 through IDOC. I need to handle the changes in the PO at the ITEM level. It has the table control. I don't know about table control. Kindly help me inorder to update the PO for a particular tab in PO item(ME22N).
I have checked the process code : ORDH and FM: MPN30_IDOC_INPUT_ORDCAD
Regards
Kannaiah
Rewards for helpful answers

Hi Ravikanth,
Thanks for the reply.
I checked the PO item for the fields which need to be updated. I am unable to find some fields in the FM which i had mentioned. Shall I need to use any Userexit or include for this. If yes, can you tell me the user exit for this. I have checked the following exits: AMPL0001
LMEDR001
LMELA002
LMELA010
LMEQR001
LMEXF001
LWSUS001
M06B0001
M06B0002
M06B0003
M06B0004
M06B0005
M06E0004
M06E0005
ME590001
MEETA001
MEFLD004
MELAB001
MEQUERY1
MEVME001
MM06E001
MM06E003
MM06E004
MM06E005
MM06E007
MM06E008
MM06E009
MM06E010
MMAL0001
MMAL0002
MMAL0003
MMDA0001
MMFAB001
MRFLB001

How to handle table control in BDC while uploading item details for anorder

Similar Messages

Maybe you are looking for