How to Handle the Carry Over leaves in Absences
Hi Friends,
I have one Requirement from my client.
let me explain you the scenario.
say Person X is having 20 annual vacation leaves per year, if he applies say 10 leaves this year and remaining 10 leaves should get carry forward to next year and next year he should be eligible for total 30days of annual vacation leave.
let me tell u that there is no balance has been attached to that leave element and no Accruals Setup has been done in the system.
Is it possible to handle it technically for carryover leaves. if yes plz explain in me .
thanks in advance
Yes, standard Oracle HRMS supports this out-of-the-box.
You define a Paid-Time Off (PTO) Accrual Plan, which defines all the business rules around entitlement and carryover and then you attach this accrual plan to employees.
Once all the business rules are defined you run a PTO Carry Over process that transfers outstanding balances (in this example 10 days) from the previous vacation year to the next.
Similar Messages
-
How to rollback process of carry over leave as already ran
Dear,
We have configured setup carry over leave and having accrual band around 30 for a year, However, our policy regarding carry forward is maximum 10 days, but user forgot to mentione it in accrual band under the accrual plan, that process has already been run, now i want to do this the same process first removing previous on which was run at the end of last year,
Kindly suggest, how could we rollback the carry over process.
--thanksThanks for support.
Secondly, could y pls tell me, how to validate user don't cross accrual ban as defined in accrual band setup either user apply through SSHR or forms base.
is there any standard option.
--thanks -
How to handle the call transaction in method of a custom business object
Hello all,
There is a custom report " RPTCORAPP" for approving leaves . As per my requirement i have develop a copy of leave workflow and for approval process i have call "RPTCORAPP" in Custom method of custom object. i have made a transaction for this custom report for approving attendances. I am calling this method though call transaction statement within method.
Problem: while approving the attendance workitem is not disappearing from the portal. Problem is due to call transaction statement.
once workitem come to the user, user click on it. control goes to the report, which display all the leave to approve on
the portal.
If after approving/ rejecting attendance user close the screen.workflow remain in the "process" status.Control wont come back after call transaction statement in the method.
At the same time if user clicks on back button inspite of closing the screen. it is working fine. workitem disappears from the portal.
How to handle the scenarion. if after approving/rejecting, i want the control to come back to the NEXT STATEMENT after call transactionstatement in my method.
Please help it out........:)Hi swami,
thanks for reply. but i am not using BDC in my method. iam just calling a custom transaction thriugh statement
Call transaction 'ZHR_APPROVE_CLINOUT'. This transaction directly run the report RPTCORAPP and display all the request. -
How to handle the Timestamp datasource while migration
Hi All
" I tried searching the forum,but didnt get the relevant one,hence posting this question".
While migration from 4.7 to ECC in R/3 system,
how to handle the Timestamp datasources( especially FI like COPA and other ) while extarcting the data from source to BW during source system migration.Since we need to empty the delta queue and should make sure that there are no delta records exists in delta queue.
Like for sales datasources using LO,we will be executing the V3 jobs for execting the LUW's from LBWQ to RSA7? In the same way is there any particular way for this also.
Anyone whi knows abt this pls share your views
Regards
ShankarHello Shankar.
Before the upgrade (import of a queue), all extraction queues and open
update orders in all clients must be processed. The content of the setup
tables must be deleted. To avoid problems during the upgrade or to
correct them, carry out the following steps:
1. Call transaction SMQ1 and check whether all queues in all clients
(client = '', queue name 'MCEX') have been processed. To process the
queues, start the collective run report for each application in the
displayed clients. If you no longer need the data in the BW system,
deactivate the relevant extraction queues and DataSource in the LO
cockpit (transaction LBWE) and delete the queue entries in transaction
SMQ1.
2. If you use the V3 update that is not serialized (usually only for
application 03): Start collective run report RMBWV303. Then check the
update orders in transaction SM13. If there are incorrect update orders
in transaction SM13, correct the orders and then start the collective
run report again. If you no longer require the update orders, you can
delete them. There may be inconsistencies between tables VBMOD and
VBHDR. For further information about this, see Notes 652310 and 67014.
3. Before the upgrade, delete the contents of the setup tables. Execute
report RMCEX_SETUP_ENTRIES to find out which setup tables still contain
entries. You can use transaction LBWG to delete the contents of the
setup tables for all clients.
Unfortunately the check that the system carries out during the upgrade
or when you import a Support Package does not display all affected
applications. Therefore, Note 1083709 provides a check report that you
can use to determine all affected applications and tables or queues.
More detailed information please check these following notes:
1083709-Error when you import Support Packages
1081287-Data extraction orders block the upgrade process
I hope I can be helpful.
Thanks,
Walter Oliveira. -
How to handle the OK button of the parameters prompt of a crystal report
Hi,
how to handle the OK button of the parameters prompt of a crystal report in vba.NET?
I want to use the parameter prompt from the crystal report itself and I want to know when the report is ready. I need to export programatically by sending email to a list of employees after the parameters has been set. The emails I send depends on the results of the report.
Im using a CrystalReportViewer control in VS2010 and Crystal Report for VS2010 v13.0.1.220.Right. But the parameter screen is driven by the viewer. Unless you create your own parameter screen and pass the parameters to the report via code.
Another thing I am not sure about:
"Then by code I want to read all the employees id from the report and send email to them with specified pages of the report. (1 page per employee)"
How do you plan on reading the employee ID from the report? I am not aware of any API that will read a value in a report so that you can then decide what page to send to whom.
I think you're approaching this kinda backwards. A question to ask is; can you do what you are trying to do in code in the CR designer? If not, using APIs will not work either. I suspect your approach should be a report that uses an employee filter. Run the report for employee x, get the report populated with the data for that employee and email it. Repeat for employee x1, employee x2, etc.
- Ludek -
How to handle the control records in case of file to idoc scenario.
Hi All,
can you please clarify me how to handle the control records in case of file to idoc scenario.Hi,
In File to Idoc scenario even though you selected apply control record values from payload and you are not getting those correct values which you have provided in the mapping.
Also check the checkboxes Take sender from payload and Take receiver from payload along with the Apply control record values from payload checkbox
Regards
Seshagiri -
How to handle the different pricing conditions changes in BI.
Dear Friends
can any one send me Regarding
How to handle the different pricing conditions changes in BI.
Thanks & Regards
RamanaHi,
Take a look at the 0sd_o06 ODS and 2lis_13_vdkon datasource for sales billing conditions.
http://help.sap.com/saphelp_nw70/helpdata/EN/36/8188408bc0bb4de10000000a1550b0/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/EN/7f/0f8c4037fba62be10000000a1550b0/frameset.htm
Regards. -
How to handle the stale cheques in EBRS
Dear Guru's
Can any bady explain me how to handle the stale cheque cases in EBRS, and what are the possible transaction codes using for that.
Any help can be greatly appreciated.
Regards,
kishroeHi
any bady know about this plz respond.
Thanks in Advance
kishore -
How to handle the extended vo in the extended controller
Hi,
I want to know how to handle the extended vo attributes in the extended controller.
I extended CompetenceElementsVO as 'CompetenceElementsEx' with 2 transient attributes called col1 and col2.
Here i want to pass value according based on some condition. for this i want to know how to handle these attributes.
I tried by using the extended vo name in the controller, if i use means then it is throwing error after the extended controller is implemented.
Same time if i try to refer this attributes from the original vo definition, jdev itself showing error.
please tell me how to handle this?
Thanks in advance,
SANHi San,
You have to extend the controller where your region is associated with,
And in that controller you get the AM(if there is more than one AM and your VO is associated with a child AM, first you have to get your required AM) and then
get the ViewObject(standard).
Then you should be able to get your newly added attributes.
Please find the below sample code to get the AM handle and VO from there, update the code according to your requirement,
Get all the VOs under the Root AM
writeLog(pageContext, "Room AM"+ pageContext.getRootApplicationModule());
String[] rootViewNames = pageContext.getRootApplicationModule().getViewObjectNames();
/* writeLog(pageContext," Length of the VOs from Rootm AM "+rootViewNames.length);
for (int j =0 ;j<rootViewNames.length ;j++ )
writeLog(pageContext,j +" Value "+rootViewNames[j]);
// Get requested AM from Root am
public OAApplicationModule getRequestedAM(OAPageContext pageContext, String requestedAMName)
writeLog(pageContext,"Requested AM called to check the AM "+requestedAMName );
String amName = "";
String objectivesAMName = requestedAMName;//"ObjectivesAM";
String nestedAMArray[] = pageContext.getRootApplicationModule().getApplicationModuleNames();
pageContext.writeDiagnostics(this,"Root AM=>"+pageContext.getRootApplicationModule().getName() + " Child AMs=>"+ nestedAMArray.length,1);
OAApplicationModule currentAM = null;
currentAM = (OAApplicationModule)pageContext.getRootApplicationModule();
for(int i = 0; i < nestedAMArray.length; i++)
amName = nestedAMArray;
pageContext.writeDiagnostics(this,"Nested AM Name=>"+amName + "and amName.indexOf(objectivesAMName) "+amName.indexOf(objectivesAMName),1);
currentAM = (OAApplicationModule)pageContext.getRootApplicationModule().findApplicationModule(amName);
//Get the view names
String[] viewNames = currentAM.getViewObjectNames();
for (int i =0 ;i<viewNames.length ;i++ )
writeLog(pageContext,i +" Value "+viewNames[i]);
if(!(amName.indexOf(objectivesAMName)==-1))
pageContext.writeDiagnostics(this,"Found Handle to My Nested AM " + amName ,1);
break;
return currentAM;
Get the VO from the AM
OAViewObject objAssessmentVO = (OAViewObject)yourAM.findViewObject("yourVO");
Thanks.
With Regards,
Kali.
OSSi. -
How to handle the table control in bapi?
how to handle the table control in bapi? example va01.
i pass multiple line item what is the procedure?
header detail same .
eample ship to party
sale to party.
line item mulptiple
10 mat1
2o mat2
30 mat3.
in bapi we can pass sinle line item.
any way to handle multiple line item pass through the bapi.
Message was edited by:
Karthikeyan PanduranganBAPI is not going through the screen flow logic so you need not to worry about the table control. Just check in the BAPi there must be one table parameter for line items just pass one int table with your data to that table parameter it will automatically update the tables.
Regards
shiba dutta -
How to handle the #error in ssrs expression
hi
Please any one help me to resolve this #error ,
I have a calculated filed in that expression i given a if condition like below
data of column is coming like this 0 , 0.0
=IIF(Fields!Column1.Value=0,0,((Fields!Column2.Value - Fields!Column1.Value)/( Fields!Column1.Value)))
how to handle the #error
Please let me know any oneHi deepuk23,
According to your description, when you use the IIF() function in the report you got some error,right?
The issue can be caused by the column1 and column2 have different datatype, I assumed that one is integer and another is float, when the Column1 is 0 or null, because IIF() function always evaluates both the true part and the false part, even
though it returns only one of them, it will throw out the error.
To resolve the issue, you should use a nested IIF() function to avoid the zero-divisor in any rate like below:
=IIF(Fields!Column1.Value=0,0,((Fields!Column2.Value - Fields!Column1.Value)/(IIF(Fields!Column1.Value=0,1,Fields!Column1.Value))))
For more information, please refer to this article:
FAQ: Why does the “Attempted to divide by zero” error still happen?
If you still have any problem, please feel free to ask.
Regards,
Vicky Liu
Vicky Liu
TechNet Community Support -
How to handle the errors in transformations
Hi
I am using SOA, JDev 10.1.3.3.
How to handle the exceptions in transformations.
If any thing goes wrong in transformation then how to handle that situation.
I am not getting any kind of instances like errored out..
Please help me out
Regards
PavankumarI think your issue is that your process is going into manual recovery.
In the console click on the tab BPEL processes. There is a link on the left for manual recovery. Do you see your processes there?
What happens if you put your transformation into a scope. The in that scope you have a catch All. In this catch All routine just do a terminate. This will error your process but you should see it appear in the console.
cheers
James -
How to handle the multiple line items in the Inbound idoc FM
Hi ,
Can any body give me how to handle the multiple line item in the idoc when we reprocessing it from workitem....
Thanks in Advance,,,,
Regards,
BharaniHi ,
Can any body give me how to handle the multiple line item in the idoc when we reprocessing it from workitem....
Thanks in Advance,,,,
Regards,
Bharani -
How to handle the 500 Internal Server Error + ADF
Hi,
How to handle the 500 Internal error ADF application? I tried with giving the error page in web.xml but it does not work
Please advicei'm not sure if this is related, but we also have the following in the web.xml file
<filter-mapping>
<filter-name>adfFaces</filter-name>
<url-pattern>*.jsp</url-pattern>
<dispatcher>REQUEST</dispatcher>
<dispatcher>ERROR</dispatcher>
</filter-mapping>
<filter-mapping>
<filter-name>adfFaces</filter-name>
<url-pattern>*.jspx</url-pattern>
<dispatcher>REQUEST</dispatcher>
<dispatcher>ERROR</dispatcher>
</filter-mapping> -
How to handle the java.policy file ?
Can somebody tell me how to handle the java.policy file?
I always get java.net.SocketExceptions and java.security.AccessControlExceptions while connecting to an appserver from an applet.
What do I have to write in the java.policy file, where do I have to place it and do I have to call it in some way form my applet?
Thanks in advance.
don callThe java.policy file goes in your jre installation directory in .../jre/lib/security (there should be one there already).
I used it to allow otherwise restricted permissions for an applet using javax.comm. Add something like the following to the file:
grant codeBase "URL:http://yourDomainName/rootDirectoryOfYourApp/*" {
permission java.security.AllPermission;
This will give the applet downloaded from your site all permissions. You might want to give only certain permissions, I don't know.
Teri
Maybe you are looking for
-
Is there a way to generate a report of task errors? I have a "Load from Resource" task that generated errors but I don't want to go through each of the 7000+ pages to find the ~230 errors. I have tried to create a new Task Report but it won't Save or
-
BPC 10 NW Book Publication Err
Hi All, We are on BPC 10 NW SP5 Release 801 and EPM Add-In SP16. When my user trying to run a book of reports in one single pdf we are getting this error. It is able to create upto 3 report and failing on 4th one onwards. Even though we changed order
-
AIP-50077: Cannot Initialize Transport
Hi, I configured custom document over Generic Exchange using JMS tranport. I configured JMS queue in SOA. I am getting the following errors in b2b.log 2008.11.24 at 16:00:56:103: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.transport.Trans
-
Do it exist a FM to check possibility of convertion between different type?
Hi all, We have usually met the problem of DUMP when moving or writing a data type of a variable to an other variable which haven't the same data type as data type of moved variable. For example: - var01 type char10 with content "char_te
-
Problem! I just copied my extern hdd to finder and tried to open my files when I get the message: "The Map "Pictures" can not be opened since you don´t have authority to see it´s contents! What??? No one else has access to my computer....now I can´t