How to handle the "Must set build.archive.dir"?

Hi friends,
When i run my application i see the given bug:
C:\Users\user\Desktop\ticketing\nbproject\build-impl.xml:91: Must set build.archive.dir
i will appreciate it if anybody help me
Thanks
Reza_mp

Right. But the parameter screen is driven by the viewer. Unless you create your own parameter screen and pass the parameters to the report via code.
Another thing I am not sure about:
"Then by code I want to read all the employees id from the report and send email to them with specified pages of the report. (1 page per employee)"
How do you plan on reading the employee ID from the report? I am not aware of any API that will read a value in a report so that you can then decide what page to send to whom.
I think you're approaching this kinda backwards. A question to ask is; can you do what you are trying to do in code in the CR designer? If not, using APIs will not work either. I suspect your approach should be a report that uses an employee filter. Run the report for employee x, get the report populated with the data for that employee and email it. Repeat for employee x1, employee x2, etc.
- Ludek

Similar Messages

How to handle the OK button of the parameters prompt of a crystal report

Hi,
how to handle the OK button of the parameters prompt of a crystal report in vba.NET?
I want to use the parameter prompt from the crystal report itself and I want to know when the report is ready. I need to export programatically by sending email to a list of employees after the parameters has been set. The emails I send depends on the results of the report.
Im using a CrystalReportViewer control in VS2010 and Crystal Report for VS2010 v13.0.1.220.

Right. But the parameter screen is driven by the viewer. Unless you create your own parameter screen and pass the parameters to the report via code.
Another thing I am not sure about:
"Then by code I want to read all the employees id from the report and send email to them with specified pages of the report. (1 page per employee)"
How do you plan on reading the employee ID from the report? I am not aware of any API that will read a value in a report so that you can then decide what page to send to whom.
I think you're approaching this kinda backwards. A question to ask is; can you do what you are trying to do in code in the CR designer? If not, using APIs will not work either. I suspect your approach should be a report that uses an employee filter. Run the report for employee x, get the report populated with the data for that employee and email it. Repeat for employee x1, employee x2, etc.
- Ludek

How to handle the table control in bapi?

how to handle the table control in bapi? example va01.
i pass multiple line item what is the procedure?
header detail same .
eample ship to party
sale to party.
line item mulptiple
10 mat1
2o mat2
30 mat3.
in bapi we can pass sinle line item.
any way to handle multiple line item pass through the bapi.
Message was edited by:
Karthikeyan Pandurangan

BAPI is not going through the screen flow logic so you need not to worry about the table control. Just check in the BAPi there must be one table parameter for line items just pass one int table with your data to that table parameter it will automatically update the tables.
Regards
shiba dutta

How to handle national character set datatypes in oracle?

Hi
Can anyone tell me how to handle national character set datatypes in oracle?
Thanks in advance

And for data manipulation, append "N" the literal values being used in the command.
The "N" indicates that the string is to be treated as Unicode Text.
For Example: insert into TableName (ColumnName) values (N'ValueToBeInserted');

How to handle large result set of a SQL query

Hi,
I have a question about how to handle large result set of a SQL query.
My query returns more than a million records. However, the Query Template has a "row count" parameter. If I don't specify it, it by default returns only 100 lines of records in the query result. If I specify it, then it's limited to a specific number.
Is there any way to get around of this row count issue? I don't want any restriction on the number of records returned by a query.
Thanks a lot!

No human can manage that much data...in a grid, a chart, or a direct-connected link to the brain.
What you want to implement (much like other customers with similar requirements) is a drill-in and filtering model that helps the user identify and zoom in on data of relevance, not forcing them to scroll through thousands or millions of records.
You can also use a time-based paging model so that you only deal with a time "slice" at one request (e.g. an hour, day, etc...) and provide a scrolling window. This is commonly how large datasets are also dealt with in applications.
I would suggest describing your application in more detail, and we can offer design recommendations and ideas.
- Rick

How to handle the Timestamp datasource while migration

Hi All
" I tried searching the forum,but didnt get the relevant one,hence posting this question".
While migration from 4.7 to ECC in R/3 system,
how to handle the Timestamp datasources( especially FI like COPA and other ) while extarcting the data from source to BW during source system migration.Since we need to empty the delta queue and should make sure that there are no delta records exists in delta queue.
Like for sales datasources using LO,we will be executing the V3 jobs for execting the LUW's from LBWQ to RSA7? In the same way is there any particular way for this also.
Anyone whi knows abt this pls share your views
Regards
Shankar

Hello Shankar.
Before the upgrade (import of a queue), all extraction queues and open
update orders in all clients must be processed. The content of the setup
tables must be deleted. To avoid problems during the upgrade or to
correct them, carry out the following steps:
1. Call transaction SMQ1 and check whether all queues in all clients
(client = '', queue name 'MCEX') have been processed. To process the
queues, start the collective run report for each application in the
displayed clients. If you no longer need the data in the BW system,
deactivate the relevant extraction queues and DataSource in the LO
cockpit (transaction LBWE) and delete the queue entries in transaction
SMQ1.
2. If you use the V3 update that is not serialized (usually only for
application 03): Start collective run report RMBWV303. Then check the
update orders in transaction SM13. If there are incorrect update orders
in transaction SM13, correct the orders and then start the collective
run report again. If you no longer require the update orders, you can
delete them. There may be inconsistencies between tables VBMOD and
VBHDR. For further information about this, see Notes 652310 and 67014.
3. Before the upgrade, delete the contents of the setup tables. Execute
report RMCEX_SETUP_ENTRIES to find out which setup tables still contain
entries. You can use transaction LBWG to delete the contents of the
setup tables for all clients.
Unfortunately the check that the system carries out during the upgrade
or when you import a Support Package does not display all affected
applications. Therefore, Note 1083709 provides a check report that you
can use to determine all affected applications and tables or queues.
More detailed information please check these following notes:
1083709-Error when you import Support Packages
1081287-Data extraction orders block the upgrade process
I hope I can be helpful.
Thanks,
Walter Oliveira.

How to handle the messages.

Hi,
I am doing interactive report. In that how to handle the error meesages.
Regards
Srinu

HI
IF YOU WANT HANDLE THE ERROE MESSAGES
*& Report ZNNR_REPORT
REPORT ZNNR_REPORT NO STANDARD PAGE HEADING <b>MESSAGE-ID ZNNR</b> LINE-SIZE 100 LINE-COUNT 65(4).
******DATA DECLARATIONS**********
DATA : BEGIN OF IT_PLANT OCCURS 0,
        MATNR LIKE MARA-MATNR,
        WERKS LIKE MARC-WERKS,
        PSTAT LIKE MARC-PSTAT,
        EKGRP LIKE MARC-EKGRP,
       END OF IT_PLANT.
DATA : BEGIN OF IT_PONO OCCURS 0,
        EBELN LIKE EKKO-EBELN,
        EBELP LIKE EKPO-EBELP,
        MATNR LIKE EKPO-MATNR,
        WERKS LIKE EKPO-WERKS,
        LGORT LIKE EKPO-LGORT,
       END OF IT_PONO.
TABLES EKKO.
********END OF DATA DECLARATIONS*********
********SELECTION SCREEN DESIGN ***********
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
PARAMETER : P_WERKS LIKE MARC-WERKS MODIF ID S1.
SELECT-OPTIONS : S_EBELN FOR EKKO-EBELN NO INTERVALS MODIF ID S2.
SELECTION-SCREEN END OF BLOCK B1.
SELECTION-SCREEN BEGIN OF BLOCK B2 WITH FRAME TITLE TEXT-004.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS : R1 RADIOBUTTON GROUP G1 DEFAULT 'X'.
SELECTION-SCREEN COMMENT 5(20) TEXT-002 FOR FIELD R1.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS : R2 RADIOBUTTON GROUP G1.
SELECTION-SCREEN COMMENT 5(20) TEXT-003 FOR FIELD R2.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK B2.
******END OF SELECTION SCREEN DESIGN****************
*********INITIALIZATION OF SELECTION SCREEN ELEMENTS.*****
INITIALIZATION.
P_WERKS = '1000'.
S_EBELN-LOW = '4500016926'.
S_EBELN-OPTION = 'EQ'.
S_EBELN-SIGN = 'I'.
APPEND S_EBELN.
CLEAR S_EBELN.
************END OF INITIALIZATION***********************
***********SCREEN MODIFICATIONS*******************
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
    IF R1 EQ 'X' AND SCREEN-GROUP1 EQ 'S2'.
      SCREEN-INPUT = 0.
      MODIFY SCREEN.
    ENDIF.
    IF R2 EQ 'X' AND SCREEN-GROUP1 EQ 'S1'.
      SCREEN-INPUT = 0.
      MODIFY SCREEN.
    ENDIF.
ENDLOOP.
********END OF SCREEN MODIFICATIONS*****************
***************SCREEN VALIDATIONS *****************
at selection-screen.
SELECT SINGLE *
           FROM EKKO
           INTO EKKO
           WHERE EBELN IN S_EBELN.
IF SY-SUBRC <> 0.
    SET CURSOR FIELD 'S_EBELN-LOW'.
    <b>MESSAGE E999 WITH TEXT-005</b>.
ENDIF.
********end of screen validation*****************
START-OF-SELECTION.
*set pf-status '100'.
IF R1 EQ 'X'.
    SELECT MATNR
           WERKS
           PSTAT
           EKGRP
       FROM MARC
       INTO TABLE IT_PLANT
       WHERE WERKS = P_WERKS.
    LOOP AT IT_PLANT.
      WRITE : SY-VLINE , 2 IT_PLANT-MATNR COLOR COL_KEY,
             21 SY-VLINE , 22 IT_PLANT-WERKS COLOR COL_KEY,
             27 SY-VLINE ,28 IT_PLANT-PSTAT COLOR COL_NORMAL,
             43 SY-VLINE ,44 IT_PLANT-EKGRP COLOR COL_NORMAL.
    ENDLOOP.
ENDIF.
IF R2 EQ 'X'.
    SELECT EBELN EBELP MATNR WERKS LGORT
           FROM EKPO
           INTO TABLE IT_PONO
           WHERE EBELN IN S_EBELN.
    LOOP AT IT_PONO.
      WRITE : SY-VLINE , 2 IT_PONO-EBELN COLOR COL_KEY,
             12 SY-VLINE , 13 IT_PONO-EBELP COLOR COL_KEY,
             18 SY-VLINE , 19 IT_PONO-MATNR COLOR COL_NORMAL,
             37 SY-VLINE , 38 IT_PONO-WERKS COLOR COL_NORMAL,
             44 SY-VLINE , 45 IT_PONO-LGORT COLOR COL_NORMAL, 49 SY-VLINE..
    ENDLOOP.
ENDIF.
TOP-OF-PAGE.
IF R1 EQ 'X'.
*ULINE AT /1(48).
    WRITE : SY-VLINE ,2 'MATERIAL NUMBER',
            21 SY-VLINE , 22 'PLANT',
            27 SY-VLINE , 28 'STATUS',
            43 SY-VLINE , 44 'GRUP', 48 SY-VLINE.
    ULINE AT /1(48).
ENDIF.
IF R2 EQ 'X'.
    WRITE : SY-VLINE , 2 'PO NUMBER',
           12 SY-VLINE, 13 'ITEM',
           18 SY-VLINE,19 'MATERIAL NUMBER',
           37 SY-VLINE, 38 'PLANT',
           44 SY-VLINE, 45 'GRUP',
           49 SY-VLINE.
    ULINE AT /1(50).
ENDIF.
END-OF-PAGE.
ULINE AT /1(50).
WRITE :/10 'PAGE NUMBER', SY-PAGNO.
WRITE THE CONDITION WHAT EVER YOU WANT TO CHECK AND IF THAT IS TRUE SY-SUBRC = 0 THEN NO MESS IF NE 0 THEN RAISE A ERROR MESSAGE LIKE ABOVE
REWARD IF USEFULL

How to handle the bad record while using bulk collect with limit.

Hi
How to handle the Bad record as part of the insertion/updation to avoid the transaction.
Example:
I am inserting into table with LIMIT of 1000 records and i've got error at 588th record.
i want to commit the transaction with 588 inserted record in table and log the error into
error logging table then i've to continue with transaction with 560th record.
Can anyone suggest me in this case.
Regards,
yuva

>
How to handle the Bad record as part of the insertion/updation to avoid the transaction.
>
Use the SAVE EXCEPTIONS clause of the FORALL if you are doing bulk inserts.
See SAVE EXCEPTIONS in the PL/SQL Language doc
http://docs.oracle.com/cd/B28359_01/appdev.111/b28370/tuning.htm
And then see Example 12-9 Bulk Operation that continues despite exceptions
>
Example 12-9 Bulk Operation that Continues Despite Exceptions
-- Temporary table for this example:
CREATE TABLE emp_temp AS SELECT * FROM employees;
DECLARE
TYPE empid_tab IS TABLE OF employees.employee_id%TYPE;
emp_sr empid_tab;
-- Exception handler for ORA-24381:
errors NUMBER;
dml_errors EXCEPTION;
PRAGMA EXCEPTION_INIT(dml_errors, -24381);
BEGIN
SELECT employee_id
BULK COLLECT INTO emp_sr FROM emp_temp
WHERE hire_date < '30-DEC-94';
-- Add '_SR' to job_id of most senior employees:
FORALL i IN emp_sr.FIRST..emp_sr.LAST SAVE EXCEPTIONS
UPDATE emp_temp SET job_id = job_id || '_SR'
WHERE emp_sr(i) = emp_temp.employee_id;
-- If errors occurred during FORALL SAVE EXCEPTIONS,
-- a single exception is raised when the statement completes.
EXCEPTION
-- Figure out what failed and why
WHEN dml_errors THEN
errors := SQL%BULK_EXCEPTIONS.COUNT;
DBMS_OUTPUT.PUT_LINE
('Number of statements that failed: ' || errors);
FOR i IN 1..errors LOOP
DBMS_OUTPUT.PUT_LINE('Error #' || i || ' occurred during '||
'iteration #' || SQL%BULK_EXCEPTIONS(i).ERROR_INDEX);
DBMS_OUTPUT.PUT_LINE('Error message is ' ||
SQLERRM(-SQL%BULK_EXCEPTIONS(i).ERROR_CODE));
END LOOP;
END;
DROP TABLE emp_temp;

How to check the data of an archived table.

I have archived a table created by me. I have executed the write program for the archiving object in SARA. Now how can check the data of my archived table.

Hello Vinod,
One thing to check in the customizing settings is your "Place File in Storage System" option. If you have selected the option to Store before deleting, the archive file will not be available for selection within the delete job until the store job has completed successfully.
As for where your archive file will be stored - there are a number of things to check. The archive write job will place the archive file in whatever filesystem you have set up within the /nFILE transaction. There is a logical file path (for example ARCHIVE_GLOBAL_PATH)where you "assign" the physical path (for example UNIX: /sapmnt/<SYSID>/archivefiles). The logical path is associated with a logical file name (for example ARCHIVE_DATA_FILE_WITH_ARCHIVE_LINK). This is the file name that is used within the customizing settings of the archive object.
Then, the file will be stored using the content repository you defined within the customizing settings as well. Depending on what you are using to store your files (IXOS, IBM Commonstore, SAP Content Server, that is where the file will be stored.
Hope this helps.
Regards,
Karin Tillotson

How to handle the control records in case of file to idoc scenario.

Hi All,
can you please clarify me how to handle the control records in case of file to idoc scenario.

Hi,
In File to Idoc scenario even though you selected apply control record values from payload and you are not getting those correct values which you have provided in the mapping.
Also check the checkboxes Take sender from payload and Take receiver from payload along with the Apply control record values from payload checkbox
Regards
Seshagiri

How to handle the different pricing conditions changes in BI.

Dear Friends
can any one send me Regarding
How to handle the different pricing conditions changes in BI.
Thanks & Regards
Ramana

Hi,
Take a look at the 0sd_o06 ODS and 2lis_13_vdkon datasource for sales billing conditions.
http://help.sap.com/saphelp_nw70/helpdata/EN/36/8188408bc0bb4de10000000a1550b0/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/EN/7f/0f8c4037fba62be10000000a1550b0/frameset.htm
Regards.

How to handle the stale cheques in EBRS

Dear Guru's
Can any bady explain me how to handle the stale cheque cases in EBRS, and what are the possible transaction codes using for that.
Any help can be greatly appreciated.
Regards,
kishroe

Hi
any bady know about this plz respond.
Thanks in Advance
kishore

How to handle the extended vo in the extended controller

Hi,
I want to know how to handle the extended vo attributes in the extended controller.
I extended CompetenceElementsVO as 'CompetenceElementsEx' with 2 transient attributes called col1 and col2.
Here i want to pass value according based on some condition. for this i want to know how to handle these attributes.
I tried by using the extended vo name in the controller, if i use means then it is throwing error after the extended controller is implemented.
Same time if i try to refer this attributes from the original vo definition, jdev itself showing error.
please tell me how to handle this?
Thanks in advance,
SAN

Hi San,
You have to extend the controller where your region is associated with,
And in that controller you get the AM(if there is more than one AM and your VO is associated with a child AM, first you have to get your required AM) and then
get the ViewObject(standard).
Then you should be able to get your newly added attributes.
Please find the below sample code to get the AM handle and VO from there, update the code according to your requirement,
     Get all the VOs under the Root AM
     writeLog(pageContext, "Room AM"+ pageContext.getRootApplicationModule());
String[] rootViewNames = pageContext.getRootApplicationModule().getViewObjectNames();
/* writeLog(pageContext," Length of the VOs from Rootm AM "+rootViewNames.length);
for (int j =0 ;j<rootViewNames.length ;j++ )
writeLog(pageContext,j +" Value "+rootViewNames[j]);
     // Get requested AM from Root am
public OAApplicationModule getRequestedAM(OAPageContext pageContext, String requestedAMName)
writeLog(pageContext,"Requested AM called to check the AM "+requestedAMName );
String amName = "";
String objectivesAMName = requestedAMName;//"ObjectivesAM";
String nestedAMArray[] = pageContext.getRootApplicationModule().getApplicationModuleNames();
pageContext.writeDiagnostics(this,"Root AM=>"+pageContext.getRootApplicationModule().getName() + " Child AMs=>"+ nestedAMArray.length,1);
OAApplicationModule currentAM = null;
currentAM = (OAApplicationModule)pageContext.getRootApplicationModule();
for(int i = 0; i < nestedAMArray.length; i++)
amName = nestedAMArray;
pageContext.writeDiagnostics(this,"Nested AM Name=>"+amName + "and amName.indexOf(objectivesAMName) "+amName.indexOf(objectivesAMName),1);
currentAM = (OAApplicationModule)pageContext.getRootApplicationModule().findApplicationModule(amName);
                    //Get the view names
               String[] viewNames = currentAM.getViewObjectNames();
for (int i =0 ;i<viewNames.length ;i++ )
writeLog(pageContext,i +" Value "+viewNames[i]);
if(!(amName.indexOf(objectivesAMName)==-1))
pageContext.writeDiagnostics(this,"Found Handle to My Nested AM " + amName ,1);
break;
return currentAM;
Get the VO from the AM
OAViewObject objAssessmentVO = (OAViewObject)yourAM.findViewObject("yourVO");
Thanks.
With Regards,
Kali.
OSSi.

How to handle the call transaction in method of a custom business object

Hello all,
There is a custom report " RPTCORAPP" for approving leaves . As per my requirement i have develop a copy of leave workflow and for approval process i have call "RPTCORAPP" in Custom method of custom object. i have made a transaction for this custom report for approving attendances. I am calling this method though call transaction statement within method.
Problem: while approving the attendance workitem is not disappearing from the portal. Problem is due to call transaction statement.
               once workitem come to the user, user click on it. control goes to the report, which display all the leave to approve on
               the portal.
               If after approving/ rejecting attendance user close the screen.workflow remain in the "process" status.Control wont come back after call transaction statement in the method.
             At the same time if user clicks on back button inspite of closing the screen. it is working fine. workitem disappears from the portal.
How to handle the scenarion. if after approving/rejecting, i want the control to come back to the NEXT STATEMENT after call transactionstatement in my method.
Please help it out........:)

Hi swami,
thanks for reply. but i am not using BDC in my method. iam just calling a custom transaction thriugh statement
Call transaction 'ZHR_APPROVE_CLINOUT'. This transaction directly run the report RPTCORAPP and display all the request.

How to handle the #error in ssrs expression

hi
Please any one help me to resolve this #error ,
I have a calculated filed in that expression i given a if condition like below
data of column is coming like this 0 , 0.0
=IIF(Fields!Column1.Value=0,0,((Fields!Column2.Value - Fields!Column1.Value)/( Fields!Column1.Value)))
how to handle the #error
Please let me know any one

Hi deepuk23,
According to your description, when you use the IIF() function in the report you got some error,right?
The issue can be caused by the column1 and column2 have different datatype, I assumed that one is integer and another is float, when the Column1 is 0 or null, because IIF() function always evaluates both the true part and the false part, even
though it returns only one of them, it will throw out the error.
To resolve the issue, you should use a nested IIF() function to avoid the zero-divisor in any rate like below:
=IIF(Fields!Column1.Value=0,0,((Fields!Column2.Value - Fields!Column1.Value)/(IIF(Fields!Column1.Value=0,1,Fields!Column1.Value))))
For more information, please refer to this article:
FAQ: Why does the “Attempted to divide by zero” error still happen?
If you still have any problem, please feel free to ask.
Regards,
Vicky Liu
Vicky Liu
TechNet Community Support

How to handle the "Must set build.archive.dir"?

Similar Messages

Maybe you are looking for