How to handle version changes? Strategies?
We're struggling with version change issues. Most recently we tried to move from 8.5 to 8.6 and lost about a week of project time while we tried to make it run well. The problem was that the Development Environment would crash several times a day while doing block diagram edits, losing unsaved changes. We never found any clues as to why. It would be one thing to debug a VI that crashes, but when it is the LV editor itself that is crashing, how do we work on that?
Anyway, we have a policy here of freezing software updates for projects that are close to completion, because buggy updates so often delay project completions, and this triggered a return to 8.5, which is where we remain now on that project.
But now we can't install and use the VI Analyzer we just bought on any of the PCs tied to that project, as it demands 8.6. I do have one PC that is completely disconnected from this project, and it runs 8.6, so running the Analyzer there may be useful, but still messy.
How do you handle version changes? How often do you try to follow the updates? How often do you need to go back a version? Do you maintain different versions? Is it even possible to run multiple versions on an individual Win XP PC?
Thanks!
I have installed several versions of LabVIEW on my system.
Most of the toolkits are only installed in the latest versions. There are ways to install toolkits on multiple versions.
And I think that toolkits as of LabVIEW version 8.6 can be installed on several LabVIEW verions.
Ton
Free Code Capture Tool! Version 2.1.3 with comments, web-upload, back-save and snippets!
Nederlandse LabVIEW user groep www.lvug.nl
My LabVIEW Ideas
LabVIEW, programming like it should be!
Similar Messages
-
How to handle Text change event in text box in SAP B1
Hello Expert...
How to handle Text change event in source.
Please define the Event when i change the text in textbox..
currently i am using the Lost focus event but it is only occur when tab focus lost from that text box.
So please required solution ASAP..
Regards,
Abhinav Lalpurwala
Edited by: Abhinav Lalpurwala on Aug 5, 2011 3:19 PMHi,
Catch the et_VALIDATE event, when InnerEvent = False and ItemChanged = True.
If pVal.EventType = BoEventTypes.et_VALIDATE Then
If pVal.InnerEvent = False And pVal.ItemChanged Then
'TODO Your code here...
End If
End If
Regards,
Vítor Vieira -
Hello All,
I have following question about how to handle fund changes at the installment.
1) At first i created document as follows.
Tuition fee : 100 USD
Fund was 0A00 .
2) I also created installment for qbove document.
Installment 1 : 50 USD
Installment 2 : 50 USD
3) During clearing fund was changed to 0B00 for the installment 2 by the FM team for their own purpose.
When student pay installment 2, i got an error and how can i handle in this case.
your help would be appreciated.
regards,FM errors can be tricky. Changing the original fund is likely the culprit. Do you have more detail about the specific error your are receiving. This is not enough information to resolve an issue in FM.
-
How to handle password changes if we implement singlesignon between BO& BI7
Hi,
As we know ,we can implement single signon between BO and SAP BI 7, by importing roles and users through CMC and by selecting the option "Use Single signon during report refresh time".
My doubt here is, When we import roles from SAP and Auto import the users, is it only the SAP usernames that are stored in BO repository or both username and password. If second case holds true then how to handle/manage password change for a user who is already imported in BO sometime back?
Would the password changes be reflected automatically in BO?
Please guide me if you think that I'm thinking in a wrong direction.Hi Naresh,
password changes are reflected automatically in BO. BO just forwards the data to the SAP side and it does the real authentification.
Regards,
Stratos
PS: Keep in mind that you cannot change the SAP password on the BO login screen if your SAP password has expired. You have to do this with the SAP client (SAP GUI) -
How to handle value change events of select list in custom component?
My HelloUIComp code...How to handle events for "Select"...if i choose option1 from select then one text box is to be displayed in custom component and if i choose another option then some other text box is to be displayed in custom components...
public class HelloUIComp extends UIComponentBase {
public static final String account="custom.account";
public static final String RENDERER_TYPE = null;
HtmlCommandButton button = createButton();
//HtmlSelectOneMenu select=createSelect();
public void processDecodes(FacesContext context) {
Calling the lifecycle method "processDecodes" on the
internal button is absolutely critical to create action events
button.processDecodes(context);
super.processDecodes(context);
private HtmlCommandButton createButton() {
FacesContext context = FacesContext.getCurrentInstance();
HtmlCommandButton newButton = new HtmlCommandButton();
newButton.setId("Add");
newButton.setValue("Add");
newButton.setType("submit");
//newButton.setOnclick("return func_1(this,event);");
MethodBinding binding = context.getApplication().createMethodBinding("#{pc_MyProjectView.go}", null);
newButton.setAction(binding);
newButton.setParent(this);
return newButton;
/* private HtmlSelectOneMenu createSelect()
HtmlSelectOneMenu selectCategory=createSelect();
return selectCategory;
public void encodeBegin(FacesContext context) throws IOException {
String style = (String)getAttributes().get("style");
String startdate = (String)getAttributes().get("startdate");
String enddate = (String)getAttributes().get("enddate");
//String add=(String)getAttributes().get("add");
ResponseWriter writer = context.getResponseWriter();
writer.startElement("table", this);
writer.writeAttribute("border","2","2");
writer.startElement("tbody", this);
writer.startElement("tr", this);
writer.startElement("td", this);
writer.writeText("Account Category", null);
writer.endElement("td");
writer.startElement("td", this);
writer.writeText("Reg-No", null);
writer.endElement("td");
writer.startElement("td", this);
writer.writeText("Account-No", null);
writer.endElement("td");
writer.startElement("td", this);
writer.writeText("", null);
writer.endElement("td");
writer.startElement("td", this);
writer.writeText("Start-Date", null);
writer.endElement("td");
writer.startElement("td", this);
writer.writeText("End-Date", null);
writer.endElement("td");
writer.endElement("tr");
writer.startElement("tr",this);
writer.startElement("td", this);
writer.startElement("select", this);
if (style!=null)
writer.writeAttribute("style", style, null);
writer.writeAttribute("name","category","category");
writer.startElement("option", this);
writer.writeText("Select", null);
writer.endElement("option");
//to access data
Account accountObj;
AccountData accountDataobj;
List listOfAccounts;
int noOfAccounts;
accountDataobj=new AccountData();
listOfAccounts=accountDataobj.getAccounts();
noOfAccounts=listOfAccounts.size();
for(int i=0;i<noOfAccounts;i++)
writer.startElement("option", this);
accountObj=(Account) listOfAccounts.get(i);
writer.writeText(accountObj.getCategory(), null);
writer.endElement("option");
//System.out.println(accountObj.getRegNo());
//System.out.println(accountObj.getAccountNo());
writer.endElement("select");
writer.endElement("td");
writer.startElement("td", this);
writer.startElement("select", this);
if (style!=null)
writer.writeAttribute("style", style, null);
writer.writeAttribute("name","regno","regno");
writer.startElement("option", this);
writer.writeText("Select", null);
writer.endElement("option");
for(int i=0;i<noOfAccounts;i++)
accountObj=(Account) listOfAccounts.get(i);
writer.startElement("option", this);
writer.writeText(""+accountObj.getRegNo(), null);
writer.endElement("option");
writer.endElement("select");
writer.endElement("td");
writer.startElement("td", this);
writer.startElement("select", this);
if (style!=null)
writer.writeAttribute("style", style, null);
writer.writeAttribute("name","accno","accno");
writer.startElement("option", this);
writer.writeText("Select", null);
writer.endElement("option");
for(int i=0;i<noOfAccounts;i++)
accountObj=(Account) listOfAccounts.get(i);
writer.startElement("option", this);
writer.writeText(accountObj.getAccountNo(), null);
writer.endElement("option");
//writer.startElement("option", this);
//writer.writeText("00200155", null);
//writer.endElement("option");
writer.endElement("select");
writer.endElement("td");
writer.startElement("td", this);
button.encodeBegin(context);
button.encodeChildren(context);
button.encodeEnd(context);
writer.endElement("td");
writer.startElement("td", this);
writer.startElement("input", this);
if (style!=null)
writer.writeAttribute("style", style, null);
writer.writeAttribute("type","text","text");
writer.writeAttribute("name","startdate","startdate");
writer.writeAttribute("value",startdate,startdate);
writer.writeAttribute("readonly", "","");
//writer.endElement("input");
writer.endElement("td");
writer.startElement("td", this);
writer.startElement("input", this);
if (style!=null)
writer.writeAttribute("style", style, null);
writer.writeAttribute("type","text","text");
writer.writeAttribute("name","enddate","enddate");
writer.writeAttribute("value",enddate,enddate);
writer.writeAttribute("readonly", "","");
writer.endElement("td");
writer.endElement("tr");
writer.endElement("tbody");
writer.endElement("table");
public String getFamily() {
return "HelloFamily";
}NewEclipseCoder wrote:
How to handle events for "Select"...if i choose option1 from select then one text box is to be displayed in custom component and if i choose another option then some other text box is to be displayed in custom components...Two ways:
1) submit the form to the server and render the desired textbox depending on the option.
or
2) render all textboxes and use Javascript/DOM to display/hide them depending on the option. -
How to handle tab change event in UI shell main area
Hi,
I have two tabs(two taskflows) in UI shell main area. one is department tab and another is employee tab. My department tab shows employees department wise. On employee tab I have emplyee table which shows employees jobwise. This employee table has the functionality of adding new record to employee vo as well.
Now i follow these steps.
1. by defualt department tab is open.
2. by clickinng on Tasks menu link i open Employee tab in to main area. Now i have both tabs in main area.
3. at Employee tab I search all employees job = accountant. It shows the search result well.
4. Now i add a new record to it and without saving/deleting this record i move to department tab.
5. at Department tab i search employees where department =20, here no relation b/w job and department.
6. Now i return to employee tab. my newly added record got disappeared. It is there but does not show in table.
How to resolve it??
I have one solution in my mind while changing the tab i can prompt to user "you can not leave the newly added record..either save it or delete it". But how to catch tab change event here? where i can write code to prompt msg to user?
Pls help.
Edited by: 900997 on May 6, 2012 4:10 AMWith apologies for the slow reply, I'm currently travelling.
Two things to note:
1) The af:document uncommittedDataWarning flag was designed to stop users navigating away from half entered records. More about this flag can be found here:
http://docs.oracle.com/cd/E23943_01/web.1111/b31973/af_orgpage.htm#CACDDDFH (see point 4)
http://www.oracle.com/technetwork/developer-tools/adf/unsaveddatawarning-096556.html
....please note our documentation from time to time spells this flag wrong with only one "t" in the word committed, so if you're attempting a bulk search check for this (and I'll raise document bugs to get this fixed in the future).
2) On addressing the ADF UI Shell, if you're switching between "pages" in the UI Shell, as separate to switching between dynamic tabs within a single page using the UI Shell, the UI Shell will actually restart the currently running task flow in the page you're returning too. You can verify this by implementing an initializer on your task flow with a log message, and watching when the initializer is called.
In addressing your last question, at this stage I think you need to assess my first answer then come back if you think you sill need to execute the code on the tab click. I also need to know are you talking about the primary level of tabs that represent each page in the UI Shell, or are you referring to the dynamic tabs within a single UI Shell page that hold your task flows?
CM. -
How to handle "Display/Change" mode in XD0x with CUSTOMER_ADD_DATA_CS
Hi,
I've implemented customer fields to the debitor master data screen with BADI CUSTOMER_ADD_DATA_CS,
using methods SET_DATA and GET_DATA and created a new screen within a Z-function group.
So I have a new tab with the custom fields. If I do nothing further, the fields are input enabeld also within transaction XD03.
At the moment, I'm using the value of sy-tcode to check for display (=XD03) or change/create (XD02/XD01) mode to handle
the enable/disable mode of this fields.
This is my coding in the PBO of my Z-screen.
LOOP AT SCREEN.
IF screen-group1 = 'Z01'.
IF sy-tcode = 'XD03' OR sy-tcode = 'VD03'.
IF sy-ucomm = 'ENTR'.
screen-input = '1'.
ELSE.
*.. display mode
screen-input = '0'.
ENDIF.
ENDIF.
ENDLOOP.
But if the user change form display to change mode wthin(!) the transaction, the sy-tcode is still XD03 and not XD02.
If this is done in the screen with the custom fields, I can check for sy-ucomm (='ENTR'), but if an other screen is opened, I could not check for sy-ucomm.
How can I handle this?
I've found the following enhancement point:
ENHANCEMENT-POINT MF02DFD0_01 SPOTS ES_MF02DFD0 INCLUDE BOUND.
Or can I use the other methods in the BADI like SET_FCODE?
Thanks in advance!
AndreasHi Andreas:
I have to do something similar but for t-code FD02/FD03.
I've created a program type M to control my new dynpro, and using a PBO module to change the screen depending on display/modify.
I'm trying to add code to method SET_DATA, but my knowledge on OO programamtion is limited.
Could you please provide the part of your code to implement the solution described in this post?.
Best regards,
Carlos. -
Using Change Data Capture in SSIS - how to handle schema changes
I was asked to consider change data capture for a database recently. I can see that from the database perspective, its quite nice. When I considered how I'd do this in SSIS, it seemed pretty obvious that I might have a problem, but I wanted to
confirm here.
The database in question changes the schema about once per month in production. We have a lot of controls in our environment, so everytime a tables schema is changed, I'd have to do a formal change request to deal with a change to my code
base, in this case my SSIS package; it can be a lot of work. If I wanted to track the data changes for inserts, update and deletes using an SSIS package to send the data changes to the destination tables, would I have to change my SSIS package
with every schema change, or is there a way to keep the exact same SSIS package with CDC without having to change it every month?
Thanks,
KeithHi Keith,
What is your exact requirement?
If you want to capture the object_created, object_deleted or object_altered informations, you can try using
Extended events .
As mentioned in your OP:
"If I wanted to track the data changes for inserts, update and deletes using an SSIS package to send the data changes to the destination tables, would I have to change my SSIS package with
every schema change, or is there a way to keep the exact same SSIS package with CDC without having to change it every month?"
If you want the databases in two different environments to be in sync, then take periodic
backup and apply(restore) on the another destination DB.
(or)
you can also try with
SQL Server replication if it is really needed.
As I understand from your description, if you want the table data & schema to be in sync in two different database:
then create job [script that will drop the destination DB table & create the copy of source DB table ] as per your requirement:
--CREATE DATABASE db1
--CREATE DATABASE db2
USE db1
GO
CREATE TABLE tbl(Id INT)
USE db2
GO
IF EXISTS (SELECT * FROM SYS.OBJECTS WHERE name = 'tb1' and TYPE = 'u')
DROP TABLE dbo.tb1
SELECT * INTO db2.dbo.tb1 FROM db1.dbo.tbl
SELECT * FROM dbo.tb1
--DROP DATABASE db1,db2
sathya - www.allaboutmssql.com ** Mark as answered if my post solved your problem and Vote as helpful if my post was useful **. -
Multiple Vulnerabilities in OpenSSL How to handle a change on CUCM to fixed software
Regarding Bug ID CSCup22670:
I would like to ask which certificates are affected.
During upgrade to fixed version will be those certificates replaced by new ones?
Is the CAPF private key affected? If yes after generating new private key for CAPF will be all LSC certificates for the endpoints generated automatically?
Regarding Bug ID CSCup22603:
A similar question in regards to endpoints. Will be the LSC certificate automatically regenerated or there is need to regenerate a new certificate for each endpoint after upgrade to fixed version?
What is preferred order, to fix CUCM first and then the endpoints software or it does not matter
I didn't find sufficient description in official documents.
Can somebody answer those questions?
Many thanks
OndrejI re-read your post and answered my own question.
Try creating a custom MXML component based on TextInput, like this:
<?xml version="1.0" encoding="utf-8"?>
<mx:TextInput xmlns:mx="http://www.adobe.com/2006/mxml"
change="handleChange(event)"
text="{DEFAULT_TEXT}" >
<mx:Metadata>
[Event(name="TEXTINPUT_VALUE_CHANGED", type="flash.events.Event")]
[Event(name="TEXTINPUT_VALUE_IS_DEFAULT", type="flash.events.Event")]
</mx:Metadata>
<mx:Script>
<![CDATA[
[Bindable]
public var DEFAULT_TEXT:String;
private function handleChange(event:Event):void{
if (event.target.text != DEFAULT_TEXT){
this.dispatchEvent(new Event('TEXTINPUT_VALUE_CHANGED',true));
}else{
this.dispatchEvent(new Event('TEXTINPUT_VALUE_IS_DEFAULT',true));
]]>
</mx:Script>
</mx:TextInput>
Drop this custom component into your application, adding event handlers:
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml" layout="absolute"
xmlns:comps="comps.*" >
<mx:Script>
<![CDATA[
private function handle_TextInputChange():void{
btnSubmitChanges.enabled = true;
private function handle_TextInputIsDefault():void{
btnSubmitChanges.enabled = false;
]]>
</mx:Script>
<comps:TextInputChangeTracker
DEFAULT_TEXT="This is the default text."
TEXTINPUT_VALUE_CHANGED="handle_TextInputChange()"
TEXTINPUT_VALUE_IS_DEFAULT="handle_TextInputIsDefault()"
width="350"/>
<mx:Button id="btnSubmitChanges" label="Submit Changes"
enabled="false"
x="100" y="50"/>
</mx:Application>
HTH! -
How to handle frequent change of component qty to attain diff spec
Dear all,
My client maniufacture a product (process industry) in different specification ( i.e the components qty used for the process orders vil vary often but components in the BOM will be the same) so wats is the std. way to map this process in sap taking consideration of the product costing part too.
Regards,
Josephyes for such scenarios variant configuration is to be used.
you will define Spice A as your product and it will have BCD as your component
Now depending on the order given by customer you will prepare the sales order.
In sales order you will enter the values of the composition (characteristics).
Based on the composition given in Sales Order BOM of Spice A will be exploded and
quantities will be as per the composition.
For this you need to define
Material master (material type- configurable)
Characteristics (Composition)
Classses holding the characteristics.(class type 300)
Dependancies to pull the values in order BOM
config profile.
This will reduce your material codes like Spice A to very considerable Extent.
Regards,
Mandar.
Edited by: Mandar N on Feb 14, 2012 3:50 PM -
How to handle parked message in BPM?
Hi,
I have a scenario that buyer as R3 send PO(same PO number) change idoc multiple times into bpm without receiving PO change confirmation(from seller, non R3) yet, I have a loop in bpm to handle this case, the loop checks the condition whether confirmation matches change request, if not, potential loop repeats. However, if I have multiple change request(same PO number) sent from R3 to BPM, my BPM waiting for my order confirmation, then if the first order confirmation comes into BPM matches with the first change request, then I exit the loop, but I still have several change requests parked at processXXXXX yet to be processed, does anybody came into similar situations? Any good suggestions or examples?
Thanks,
MaggieHi there,
I need to correlate ChangeConfirmation to ChangeRequest with PO number, this is for the purpose of ChangeRequest waiting for Confirmation for the same PO number. However, I don't know how to handle multiple changes come into BPM without confirmation yet, my current design is that I immediately enter a loop in BPM, with condition confirmation Info doese not match change info, thus the change request is bundled with bpm process, once the porcess is finished(response match change request), the queue of my other change requests(the parked ones) now got deleted, does anybody have any good suggestions in handling multiple change request(for same PO number) in bpm? Is there a way I can force bpm to handle one request one response, throw some error message if multiple changes comes together without response yet? Anybody had encountered similar issues?
Thanks,
Magge -
Handling Visual Changes in a Cairngorm Application
I was wondering if there are any suggestions/best practices for how to handle visual changes in a Cairngorm Application.
I am currently working on a Cairngorm Application with many moving parts - Trees, Lists, ViewStacks with ViewStacks as children. I want the application to be able to change visually based on some user actions - no real business logic involved. For instance, I have a menu that has options for displaying PopUps, or making hidden Panels visible. Right now, I am using Events all over the place to bubble up to the appropriate parent component.
Does it make sense to have properties in the Model that control the visual aspects of the Application?
Any thoughts are greatly appreciated.
Thank you.Absolutly, I think.
We bind, for instance, the enabled property of many controls to {model.loginOK} for instance, or control visible/includeInLayout with {model.userRole=='admin'}. -
I have 3 server (Web server, database sql 2012 server and Active directory). I'm using sqlsvr version 3.0, PHP version 5.3 ,IIS version 7 and windows server 2008.
Right now my php connection to SQL 2012 using AD id, so How to handle if password on active directory change?Solved : Using Kaberos
-
While installing a program (MediaCenter.exe) to handle audiobooks from the library, I erroneously associated the download site with Windows Media Player instead of the actual application (NetLibrary Media Center). How can I reverse/change this? Reinstalling the application does not clear the error, so I'm assuming the association is somewhere in Firefox.
Never mind -- I just found it under Tools/Options.../Applications, where I changed the incorrect association of "nlmcp" from Windows Media Player to the correct one, NetLibrary Media Center. Done!
-
How to handle the different pricing conditions changes in BI.
Dear Friends
can any one send me Regarding
How to handle the different pricing conditions changes in BI.
Thanks & Regards
RamanaHi,
Take a look at the 0sd_o06 ODS and 2lis_13_vdkon datasource for sales billing conditions.
http://help.sap.com/saphelp_nw70/helpdata/EN/36/8188408bc0bb4de10000000a1550b0/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/EN/7f/0f8c4037fba62be10000000a1550b0/frameset.htm
Regards.
Maybe you are looking for
-
Dialing and recieving changes which had been done in ios 7.1 is worst than ever why you making it smaller make it bold like before as in ios 6.
-
It still shows confirmed quantity at sales order in case of no stock
Hi, I have the availability check configuration, but my requirement for 0 confirmed quantities at sales order in case of no stock is not working. That is- It still shows confirmed quantity at sales order in case of no stock. Please suggest. All the
-
Can't install iTunes 10.7 on Windows XP with SP 3
I have tried installing iTunes 10.7 and get a error due to a problem with the windows installer package. I have run WindowsXP-KB942288-v3-x86.exe, and rebooted, but I still have the same problem. I had the same problem with the previous version of iT
-
How do I adjust the length of a genius list in Itunes 11
Aside form any number of problems I am finding with this new version, my current favorite is how do you get more than 25 songs on a genius list? and don't get me started on what happened to find duplicates function. Thanks
-
Hello, everybody! After upgrade xorg to 7.4, I can't find the program xvidtune. Could anyone tell me which package it's in? Thanks! I search "xvidtune" and "package" in the forum, and there is a topic shows that it's in xorg-server-utils package, I h