How to have a field show twice in the alv?

hi,
there are two questions about alv (OO).
1. i want to make a field show twice in the ALV,. For example, value of first column is 'A', and now 'A' should also show in the fifth column. which method should i use? or other solutions?
2. i have known two fields, and they are field 'A' and field 'Bbbb', how to have them show in the same column such as 'A Bbbb'
Thanks in advance!

Hello Daniel,
There's no direct way to do this. however, it is technically possible to meet your requirement.
1. The internal table should also contain another field for the 5th column. There should also be a corresponding entry in the field-catalog. Before calling the ALV Grid, the values for this field should be populated with the same values as the values in the 1st field.
2. Again, the internal table should contain the corresponding field and the field catalog should have it as well. Before calling the ALV Grid, concatenate the values into this field and display them.
I hope this helps. If not, please get back and we should be glad to help you.
Regards,
Anand Mandalika.

Similar Messages

How to code in the URL to have a default show up in the search section.

Hi All,
I have a query in CRM-PCUI. Do anyone know how to code in the URL to have a default show up in the search section. I do not want to set it in the settings since it needs to be changed for each search criteria each time. Or if this can be defaulted using a view how would that be done?
Thanking you in advance.
Thanks and Regards,
Chirag Mehta.

Hi Karthik,
Thanks for Replying.
No that is unfortunately not what i want but to pass with the URL any parameter so that i can get the Show drop down to have a default show up in the search section.
Thanks and Regards,
Chirag Mehta.

How to map journal fields and whats is the better process type

/Journal/JournalSuspenseCostCentre     NULL
/Journal/JournalBalancingCentre     Lookup from Organisation ID
/Journal/JournalMultiCompany     u2018Nu2019
/Journal/JournalBatchNumber     NULL
/Journal/JournalNumTransactions     Total number of /Journal/JournalLine transactions
/Journal/JournalBaseDRTotal     Sum of /Journal/JournalLine/JournalLineBaseValue u2013 Debit Values only
/Journal/JournalBaseCRTotal     Sum of /Journal/JournalLine/JournalLineBaseValue u2013 Credit Values only
How to map journal fields and whats is the better process type idoc/proxies?please let me know
Journal Line
Multiple journal lines per header:
Schema Element     Data
/Journal/JournalLine/JournalLineCostCentre     Bank account control Cost Centre
/Journal/JournalLine/JournalLineAccount     Bank account control Account Code
/Journal/JournalLine/JournalLineMoneyTotal     Transaction Line Amount
/Journal/JournalLine/JournalLineVolume     NULL
/Journal/JournalLine/JournalLineDescription     Payee Name
/Journal/JournalLine/JournalLineChequeBookReference     NULL
/Journal/JournalLine/JournalLineMatchField     Cheque Number
NB Contra accounting entries should be posted to:
Schema Element     Data
/Journal/JournalLine/JournalLineCostCentre     Bank account control Cost Centre
/Journal/JournalLine/JournalLineAccount     Bank account control Account Code
/Journal/JournalLine/JournalLineMoneyTotal     Transaction Line Amount * -1
/Journal/JournalLine/JournalLineDescription     Payee Name
/Journal/JournalLine/JournalLineMatchField     Cheque Number
/Journal/JournalPeriod     Current General Ledger Period
/Journal/JournalYear     Current General Ledger Year

It looks you are new to PI,
you have to develop scenario end to end, by creating source data type and target data type(if you have XSD's not required),then use Graphical mapping (message mapping) to map source and target structures.
Search in sdn for one end to end scenario you will understand easily
Regards,
Raj

How to Set JFilechooser to show file with the same extension in the filetyp

How to Set JFilechooser to show file with the same extension in the filetypes??
help

I also don't understand, but if you mean how to display only files with a certain extension in your JFileChooser then you should have a look at the JFileChooser API:
http://java.sun.com/j2se/1.5.0/docs/api/javax/swing/JFileChooser.html
The introduction shows an example of how to do that.

How to make plug ins show up in the filter menu, several Topaz plug ins are in the 13 plug in folder?

How to make plug ins show up in the filter drop down menu, when several Topaz plug ins have been moved from Elements 11 to the plug in folder for Elements 13?

Thank you for your advice. I followed your directions, but came up with the same results. However, I did discover that whenever I open up the iPhoto Library that is already existing on my MacBook a certain set of pictures shows up. But then when I open up the iPhoto Library from the Hard drive another set of pictures shows up. BUT not ALL of my pictures are showing up on the iPhoto Library from the hard drive. At least the last two years of pictures are not showing up?! Actually, it appears that all the pictures are there from when I started using iPhoto about 5 years ago up until around the time that I got my iMac desktop computer and started using that (2 years ago). I have noticed that more recent videos I have made are showing up in a folder on the hard drive, but will not appear when I open up iMovie?! Any ideas on how to access my pictures from the last 2 years off of the hard drive???

I have album covers showing up on the wrong album in iTunes.   iTumes will not let me delete them. I have a new laptop with Windows 8.

I have album covers showing up on the wrong album. iTunes will not allow me to delete them. It acts as though it did, but does not, with no error message.

Hi,
No available software and drivers for Windows 8.1:
   http://support.hp.com/us-en/product/HP-Photosmart-C5500-All-in-One-Printer-series/3575176/model/3575...
Please try Software and drivers for Windows 8 for the series:
    http://ftp.hp.com/pub/softlib/software12/COL30128/mp-109095-2/PS_AIO_04_C5500_NonNet_Full_Win_WW_140...
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

HT1918 Hello I have been charged me twice for the app

Hello I have been charged me twice for the app The Training Notebook, and the training notebook light.its the same exact App they charged me 14.99 twice, please refund me 14.99 for this app.
<Edited By Host>

These are user-to-user forums, you are not talking to Apple here - I've asked the hosts to remove your email address from your post.
You can contact iTunes support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

How to have an effect show up in a certain part of the clip?

I'm resonably new to AE and I'm editing a video where the guy pulls a scoped gun up to his face, and I was wondering if there was a way to have only the scope lense get brighter as he pulls it up to his face. Thank You For Your Help.

BTW, here are a couple of videos in which I show how to have an effect only apply to one item in a scene:
- using Roto Brush
- using masks (manual rotoscoping) and motion tracking

How to have multiple movies show in same window on same web page

Hi folks,
Here's what I mean: I have a web page with several pix on left side, and an embedded QT player window on the right. I want my users to click on one of the pix, and the associated quicktime movie shows up in the player window and starts playing (see player code below--pretty standard).
So far, the only way I can think of to do this is to have multiple identical pages, the only difference being each one of them has a different movie in the "embed source" tag (so when you click on one of the pics it takes you to the new page, but to the user it will appear as if it's the same page).
But for ease of modifying this page in the future (which I'll be doing a lot), I'm looking for a more elegant solution. Anyone know of a way to do this, using scripting or...??
Thanks in advance for any suggestions.
player code:
object codebase="http://www.apple.com/qtactivex/qtplugin.cab" name="movietitle" alt="quicktime movie player" width="320" height="256">
<param name="controller" value="true" />
<param name="autoplay" value="true" />
<param name="pluginspage" value="http://www.apple.com/quicktime/download/" />
<embed src="movies/light1qt6.mov" width="320" height="256" name="movietitle" controller="true" autoplay="true" pluginspage=" http://www.apple.com/quicktime/download/"></embed>
Mac OS X (10.3.9)

This is beyond anything I have ever tried. But I think I know what you have in mind, and you should be able to do it using JavaScript. I did it with still images on this page:
http://capital2.capital.edu/admin-staff/dalthoff/adventures/tr2005/ohfair2.html
You would need to give the movie container a name so that you can access it from JavaScript, and you have the added problem of needing to control the QuickTime object from JavaScript. Have a look at the QuickTime JavaScript API; it might be helpful:
http://developer.apple.com/documentation/quicktime/Conceptual/QTScripting_JavaSc ript/index.html
In spite of the code on that gallery page I linked above, I really don't speak JavaScript, and I barely understand how my own code works. But I think JavaScript will allow you to do what you want to do, and you can probably even write a custom controller for the movie right into your web page.
--Dave Althoff, Jr.

How to have a field automatically fill in another field when checked

Does anyone know if there is a way to have a field automatically fill in another field with a specific dollar amount when a field is checked.
I am doing a registration sheet for a charity event where we have to pay for each person that attends. I would like it set up so that when someone checks in the person at the registration table would just click the check box (E2) and then have it fill in the field next to it a dollar amount of $15.00 (F2) which would be owed to the place hosting the event.
Attached is a picture of the spreadsheet: example: persons checks off E2 and the amount $15.00 would automatically fill in field F2. I would then do this for each line and have the F column total the amount owed to the place.
I am VERY new to numbers and writing formulas so if you can be specfic with how to do the code would be greatly appreciated. THANK YOU!

please remember to post the actual solution (equation in this case) so others that are searching for similar items see the solution, not just
Got it, replaced 0 with '''.
Thanks
Jason

How to have some fields in the header of the report

Hi All,
we would like to have some fields in the header of the report (every page but the first page), but Word won’t let you insert fields into the header. Are there any work arounds to do something like that?
Thanks,
Vandana

'Insert Menu -> Field' does not work for headers.
Try this. Say if you want to insert a XML tag named TRX_NUMBER in header. Put <?TRX_NUMBER?> in the header. This will display TRX_NUMBER tag in header.

How to align (center) field's content in the section (band) limits

The environment is:
CR version: CR version: CR 10.2.3600
VS version: VS 2005 Prof + C#
Application type: Windows application
The Text objects can have set crHorCenterAlign property. There are no similar crVertCenterAlign property. So, how can we vertically align the Text objects content in theirs limits.
It would be usefull to have more properties, I mean something like this: TopAlignment, CenterAlignment and BottomAlignment. Currenty CR uses TopAlignment as a default settings which cannot be changed and is unavailable for a developer.
The similar alignments but in section (band) limits would be usefull for objects. For example, when the details rows have different heights which depend on a fields content smaller fields are printed at the top of the section (band). It would be usefull to have the object properties to set how the object is to be aligned in the section limits.
Please look at this [picture |http://www.zgadzaj.pl/temp/vertical.jpg]. It shows that 2-nd column has larger content, so the section has been expanded. But rest of columns are printed at the top of the band. If we have additional properties than we can decide how objects should be vertically aligned.
Perhaps I am wrong and there are somewhere vertical alignment setting hidden under different names.
Regards,
Marek

Hi Marek,
The version that is shipped with Visual Studio is a basic version and set of API`s. For full control you can purchase a full version of Crystal Reports. With this version you have an extended set of API`s with CR assemblies as well as the Report Application Server which runs inProc and has the RCAPI set of API`s that gives you more control on all objects, not fully but they are adding more functions all the time.
RAS has Alignment API`s available.
Download a Trial version of CR XI R2 ( SP4 Full build ) and then SP5 which is incremental and then download sample app`s to get you going with RAS.
Thank you
Don

How to have amounts and amounts splitted at the same time

Hi everybody, I need to show data as in the example (4 fields):
Product Category           Number of tickets by category               Product               Number of tickets by product
Category 1                              100                            product A                             50
                                                                       product B                              50
Category 2                               10                             product C                              8
                                                                       product D                               2As you can see I need to see the total of tickets for each product category, and then splitted by product.
In order to try to have this result, I take the following fields from the business area:
Product Category
count(tickets_id)
Product
but I'm not able to have the amount of tickets by category and the amount of tickets by product at the same time inside the report.....because as soon as I split by product I loose the total of tickets by Category.....
How can I have this two amounts together ? The first referred to the total of tickets by Category and the second splitted by product at the same time?
I tried to do a calculation count(count(tickets_id))....but it's not possible...I have the error "Nested Aggregated functions are not allowed"..
Any help will be appreciated
Thanks in advance
Alex

Tamir, thank you so much !!!
It work perfectly ! but...just the last question...How can I group these records ?
I explain to you better. Now, the situation, after using the analytic functions (as you mentioned) is the following:
   Product_Category      Count                  Product             Count
     Category 1          100                   Product A              40
     Category 1          100                   Product A              40
     Category 1          100                   Product A              40
     Category 1          100                   Product B              60
     Category 2          10                    Product C              8
     Category 2          10                    Product D              2
     Category 2          10                    Product D              2 If I use the SORT (order by), I have empty records (blank) as below:
   Product_Category      Count                  Product             Count
     Category 1          100                   Product A              40
     blank               blank                 blank                  blank
     blank               blank                 blank                  blank
     Category 1          100                   Product B              60
     Category 2          10                    Product C              8
     Category 2          10                    Product D              2
     blank               blank                 blank                  blank ...but I like to have the data grouped as:
   Product_Category      Count                  Product             Count
     Category 1          100                   Product A              40
                                               Product B              60
     Category 2          10                    Product C              8
     Category 2          10                    Product D              2 So, my question is this: how can I group the data using Discoverer ?
Thanks again
Alex

I have Chinese Characters showing up on the top of my Firefox page.

The Chinese Characters have been showing up for a couple of months. I have tried using various Virus Detecting programs such as MalewareBites but they don't seem to fix the problem. These Chinese Characters show up on the initial Firefox Search Screen as well as my ANZ Bank and Ancestry.com.au webpages just to name a few. How can I get rid of them. These Chinese Characters don't appear on Google or Internet Explore. If this can't be fixed I may have to stop using Firefox and use Google or Internet Explorer. I have tried attaching an image of this problem but it appears I am unable to.

Hi, this is a known problem with McAfee Site Adviser, so if you are using it, that could be the cause. [https://community.mcafee.com/thread/76071?tstart=0 Here's a link to their forum], and [http://service.mcafee.com/faqdocument.aspx?id=TS100162 here's instructions] for removing it - should you wish to.
Hope that helps.

How to Prevent/Control doing MIGO twice for the same material

Dear
The stores clerk by mistake has done MIGO twice for the same material. Is there any way to prevent/check the same in standard SAP? Vendor does not send the invoice/delivery challan to stores directly. Invoice is sent to Finance Department.
Regards

It is very unlikely that you could spec an ABAP solution to this problem.
You may be able to spec an exit that would prevent GR being carried out for a PO Item twice on the same day. But that is not infallible, as there may be valid circumstances when you would need to carry out two GR's for a PO item on the same day. A fix for a small problem that creates a large one is not a good fix.
You also need to ask how big this problem really is - if a user duplicates a goods receipt every once in a long while then you probably do not have a serious problem.
Rather than look at a system fix for the error, I would suggest that you look at what you can do to improve the physical process.

How to have a field show twice in the alv?

Similar Messages

Maybe you are looking for