How to have all InfoProviders show in InfoPackage under target?

Hi,
I have one Info Source updates two master data objects. However, I see only one master in Target. By 'show data flow', I can see they both are associated with that Info Source. They both are inserted as Info Provider. Is anything I have to take care? Please and thanks.
yc

hi,
Check whether u selected 2 infoojects as data targets or not...
in data flow it will show if it is used in that infosource...but there is chance to select only one in data targets tab...of infopackage
Siddhu

Similar Messages

When i updated itunes I lost all my music, I was able to retrieve it from my previous version, but now a artists have all of their songs list under one unknown cd. How can I seperate these cds with the correct songs included?

When I updated itunes I lost all of my music, I was able to retrieve it from a previous itunes library, but now some artists have all of their songs listed under one "unknown album." Is there a way to separate these songs back into the correct albums? Also, is there a way to make songs that have a featured guest just show up with the rest of the album instead of making a whole new spot for it? Thanks!

" When I did this, my library showed all the music I have "purchased" from itunes but did not have the music that I downloaded a long time ago through itunes from my old CDs."
Correct.
" How can I get that music to show up in my library now on my new computer? "
Copy it from your old computer or your backup copy of your old computer.
The sync is one way - computer to ipod.

I have two Creative Cloud accounts, occurred by accident, I wish to merge them and have all my details and licenses under one account, how do I do that?

I have two Creative Cloud accounts, occurred by accident, I wish to merge them and have all my details and licenses under one account, how do I do that?
This is due to the different changes Adobe has gone through and unfortunately I used different emails at certain times.

Under one Adobe ID you can have one CC only,if by accident you have purchased two CC under one account, it needs to be cancelled & refunded, please contact Adobe Support at
http://adobe.ly/yxj0t6
Regards
Rajshree

How to have an effect show up in a certain part of the clip?

I'm resonably new to AE and I'm editing a video where the guy pulls a scoped gun up to his face, and I was wondering if there was a way to have only the scope lense get brighter as he pulls it up to his face. Thank You For Your Help.

BTW, here are a couple of videos in which I show how to have an effect only apply to one item in a scene:
- using Roto Brush
- using masks (manual rotoscoping) and motion tracking

How to have a field show twice in the alv?

hi,
there are two questions about alv (OO).
1. i want to make a field show twice in the ALV,. For example, value of first column is 'A', and now 'A' should also show in the fifth column. which method should i use? or other solutions?
2. i have known two fields, and they are field 'A' and field 'Bbbb', how to have them show in the same column such as 'A Bbbb'
Thanks in advance!

Hello Daniel,
There's no direct way to do this. however, it is technically possible to meet your requirement.
1. The internal table should also contain another field for the 5th column. There should also be a corresponding entry in the field-catalog. Before calling the ALV Grid, the values for this field should be populated with the same values as the values in the 1st field.
2. Again, the internal table should contain the corresponding field and the field catalog should have it as well. Before calling the ALV Grid, concatenate the values into this field and display them.
I hope this helps. If not, please get back and we should be glad to help you.
Regards,
Anand Mandalika.

How to have all columns display in one go in RSA3

i'm trying to extract the sales order item (2LIS_11_VAITM) thru RSA3 into flat file.
However, the maximum number of columns is limited to 90 columns ( with a hundreds of hidden fields by default). I don't see the system provide you the user parameter where you can change the output list to ALV grid rather. Please advise how can I have all the columns displayed in one go ( even if the column header too shorten is fines to me)?

mask as unanswer

How can I stop Firefox from telling me "Plugins not up to date"? I have all latest plugins that run under PPC 10.4 and Firefox 3.6.28

Problem: a yellow message saying "Plugins are not up to date" (translated from German) keeps coming up filling the very first line of every webpage. This is ok for every page, but in GMX (my email online account provider) they load advertisings at the bottom of the page (allthough I have the Firefox Add-Blocker installed and activated) and everytime the advertising is loaded new, the yellow message come again. That disturbs me writing an email, because the letters stop appearing on the page and I have to wait.
I have a PowerPC Mac with Mac OS X 10.4 and Firefox 3.6.28 which is the last German version as far as I know. I alsso have all plugins at the latest version. So the plugin-message isn't helpful at all, because I jsut can't update.

Go to '''Tools->Options->Advanced->Update''' and uncheck the box that says '''Firefox''' and click OK

How to have all my music in one place!!

Hi All
My itunes is in a mess!! My original computer broke and the itunes library had some of my cd collection as well as purchases from itunes. I cannot find the back-up discs from this original library, it is however on my old ipod (which hasn't been synched for over a year!!). Before the computer broke, I installed a couple of my favourite playlists onto my iphone (but not my entire music library). I have been making new purchases from the same account name and password as I have always had but obviously on itunes re-installed onto a new laptop. These new tunes have been synched to my iphone and I have recently upgraded my iphone software after backing it all up etc.
When I tried to sync tonight, my iphone said that i had to erase and sync my library as i wanted to transfer new purchases onto it - i did this as there was no other choice! I have lost my fav playlists and only have recent purchases in my itunes library on the laptop. i tried to sync my ipod which has my entire library minus recent purchases on it and it says that it is linked to another library and cannot transfer into my itunes - I have never had a different itunes account!! I would like all my music together but now have half on one device and the other half on the other! Is there a way I can merge the 2 together as i thought you could run 2 devices off one account - have tried thru' homesharing but not sure if that's the right way???
Thanks in advance
Anna

Hi MonkeyIsland2013,
You can use the Consolidate iTunes Library function to do this:
iTunes 11 for Windows: Change where your iTunes files are stored
http://support.apple.com/kb/PH12365
Consolidate your files in the iTunes folder
You can consolidate all the files in your library in the iTunes folder—for example, to make it easier to move your library to a new computer.
Choose File > Library > Organize Library.
Select “Consolidate files.”Files remain in their original locations, and copies are placed in the iTunes folder.
To create folders (Music, Movies, TV Shows, Podcasts, Audiobooks, and so on) inside your iTunes folder, and place all your imported media files in the appropriate folders, select “Reorganize files in the folder ‘iTunes Media.’”
Cheers,
- Ari

Thinkserver RD650 & 720ix RAID - How to get all drives showing up in TDM ??

Hi, Have just received an RD650 with a 720ix controller. The chasis I have is the one where it provides a hybrid of disk form factors. So at the front left of the server it first has 6 x 2.5" bays, and then 3 x 3.5" bays, that makes up the first half of the backplane. Then the rest of the front of the server and the other half of the back plane is populated by 6 x 3.5" bays. I have 6 hard drives in total: 2 x 300GB 2.5" 15k SAS and 4 x 3TB 3.5" 7.2k SAS. However, when I go into storage management in the TDM, the drive count is only 5 and I do not get the option to include all 4 of my 3.5" drives into a virtual drive, I only get the option of including 3. So the last 3.5" drive that is on the right hand side of the server and backplane is not showing as available. Now I know this controller supports up to 32 drives, so what do I need to do to get this to show up as an available drive? I'll post an image here as well, the green outlines are my drives which ARE available, the red box is my one 3.5" drive which is NOT showing as available (all lights are on and drive seems to be working normally, if I swap that drive for another I still just get the same, 3 of the 3.5 drives available instead of all 4). I would REALLY appreciate some help with this, I need that drive showing up for RAID10 or this server goes back! Thank you,LD.

Yeah sorry I meant to update this sooner, it was a dead drive, I thought I had checked it in other bays properly but obviously not. This server only has 2 usb ports! Crazy, so if you are flshing a firmware or loading a driverbundle or whatever into the TDM but USB, you have to take out either the keyboard or mouse, what genius decided this? All servers should have at least 3 USB ports, whether you are going to run them headless eventually or not. Also, ALL of the 4 3.5" drive caddies are cracked and broken where the screw attaches the plastic front part to the metal! This must have been done in the factory AND one of the sprung screws that holds the raid card down is snapped! Anyway, original problem is solved.

How to have all the songs of my library "ticked in the box " ??

Excuse me I'm french so it can seem a bit hard to understand but i'll try my best.
I have 4000 songs and I don't know why they all got "ticked off" (the little box on the left of a title is not ticked so they don't play one after the other unless i dont tick them all)
How can I have this done for all my songs ??
I dont want to do it song by song ...
Thank you very much for your help !!
Fabian

yeah sorry i'm stupid i found what i wanted right click and it's there ....

How to have multiple movies show in same window on same web page

Hi folks,
Here's what I mean: I have a web page with several pix on left side, and an embedded QT player window on the right. I want my users to click on one of the pix, and the associated quicktime movie shows up in the player window and starts playing (see player code below--pretty standard).
So far, the only way I can think of to do this is to have multiple identical pages, the only difference being each one of them has a different movie in the "embed source" tag (so when you click on one of the pics it takes you to the new page, but to the user it will appear as if it's the same page).
But for ease of modifying this page in the future (which I'll be doing a lot), I'm looking for a more elegant solution. Anyone know of a way to do this, using scripting or...??
Thanks in advance for any suggestions.
player code:
object codebase="http://www.apple.com/qtactivex/qtplugin.cab" name="movietitle" alt="quicktime movie player" width="320" height="256">
<param name="controller" value="true" />
<param name="autoplay" value="true" />
<param name="pluginspage" value="http://www.apple.com/quicktime/download/" />
<embed src="movies/light1qt6.mov" width="320" height="256" name="movietitle" controller="true" autoplay="true" pluginspage=" http://www.apple.com/quicktime/download/"></embed>
Mac OS X (10.3.9)

This is beyond anything I have ever tried. But I think I know what you have in mind, and you should be able to do it using JavaScript. I did it with still images on this page:
http://capital2.capital.edu/admin-staff/dalthoff/adventures/tr2005/ohfair2.html
You would need to give the movie container a name so that you can access it from JavaScript, and you have the added problem of needing to control the QuickTime object from JavaScript. Have a look at the QuickTime JavaScript API; it might be helpful:
http://developer.apple.com/documentation/quicktime/Conceptual/QTScripting_JavaSc ript/index.html
In spite of the code on that gallery page I linked above, I really don't speak JavaScript, and I barely understand how my own code works. But I think JavaScript will allow you to do what you want to do, and you can probably even write a custom controller for the movie right into your web page.
--Dave Althoff, Jr.

[iPhone] How to have a background showing under a transparent EAGLView?

I'm trying to have a fix background that is blended with the OpenGL contents.
I've tried to set an UIImageView at the back of a EAGLView but the image shows on top of the EAGLLayer. So I guess I am doing it wrong :]
Is it possible? I also read that it will also imply a severe performance hit but I am still wondering how to do that.
Any help will be greatly appreciated, and bonus points for sample code!

Hi, that's easy too.
[myView setBackgroundColor:[UIColor colorWithPatternImage:myImage]];

How to have all albums in one file

I have some albums where there are some duets. On the HD, no pble, all songs are in correct order but on the Ipod, when searching per album, I may only have 5 songs out of 10 as the other ones are filed under different artists name. Usually Mr ABC featuring DEF instead of all the songs under ABC folder. It is very annoying as I cannot listen a fuill album.
Thanks

In iTunes you can select the songs in an Album at the same time, do a Get Info, then under Album Artist, enter the one name you want the album to be grouped under, e.g. "Mr. ABC" and all the "FEAT." songs will be nicely grouped under the single album even though the Artist tags might be different for each song.
Unfortunately, the 5th generation iPods do not have this same feature. So when you sync that album to your iPod it will be broken up into multiple artists like you noticed. I am not sure if that was taken care of with the newer Classic line of iPods or not.
So there is nothing you can do about it other than re-tagging all those songs in iTunes. For example, one common way around this is instead of:
Title: This Is My Song
Artist: Patrick Feat. My Dad
you would instead rename all the tracks so the Artist is the same and add the features artist to the song title like so:
Title: This Is My Song feat. My Dad
Artist: Patrick
Otherwise you can just live with it on the iPod the way it is.
Sorry,
Patrick

How to have Windows computers show up in shared...

I am having the worst trouble with this. My parents' Windows computer showed up under "Shared" on the sidebar at first on Leopard, but then all of a sudden it disappeared and I haven't been able to get it back there. What is the secret?

Hi Matt,
I'm having the same problems, really irritating! I've no answer I'm afraid, though a temporary solution is:
In the finder menu, select Go -> Connect to Server (or hit apple+k)
In the server address box, type smb://Target_Computer Name
Obviously, replace TargetComputerName with the network name of the computer you want to connect to. So it could be smb://dev or smb://johnscomputer etc...
Hope this helps a little.

How to have all my Gmail alias into my iPhone?

I use Gmail and i want to use all my alias on my Gmail to my iPhone.
i'm looking for somethings that i can send a email without recieve email.

As stated in your first post, restore your phone as new.

How to have all InfoProviders show in InfoPackage under target?

Similar Messages

Maybe you are looking for