How to have audio widget start automatically

how to have audio widget start automatically when you turn the page in Ibook Author. I only see a loop funktion for the widget.

So I cannot use ibook author if I want this feature ?
You can't publish to iBooks if you want that ability. Doesn't matter what you use.
Making apps can be non-trivial. If you are curious about them, see the Developer forums here and the Dev Center when it comes back online.

Similar Messages

  • In windows 7, how do I make firefox start automatically when I turn on the pc.?

    In windows 7, how do I make firefox start automatically when I turn on the pc

    That worked, thanks. When I turn on the pc, I almost always go to the internet before anything else, so this eliminates one step. It doesn't seem to save any time, however, but it is easy. If anyone else wants to try this, it looks like it's very easy to undo if you change your mind.

  • [Solved] How Can Internet Connection to Start Automatically?

    I have a fresh install and if I run "sudo dhcpcd eth0" then it works fine, but it doesn't start by itself.
    I tried
    sudo systemctl enable dhcpcd
    but the response was
    Failed to issue method call: No such file or directory
    I knew how to do this when we had rc.conf.
    How do I do it now?
    Last edited by CaptainKirk (2012-11-15 19:48:44)

    Ah, righto. I was looking at the page but I was stuck on the "Establish an internet connection" section, which actually says dhcpcd is started automatically--I guess that means just for the live CD. I didn't find the "Configure the network" section.
    Thank you.

  • How to have "new folder" command automatically select "untitled folder"?

    How to have "new folder" command highlight name change?
    On a couple of my Macs, when I give a "new folder" command, the "untitled folder" name is immediately selected/highlighted for immediate entry of the new name for the folder.
    On other Macs I have, when I give a "new folder" command, I must then manually select the "untitled folder" name before I can type in the new name.
    Does anyone know how to set my Finder so that when I give a "new folder" command it will be immediately highlighted/selected for entry of the new name?
    I'm using the latest OS-X on all of my Macs.

    ZDHart wrote:
    How to have "new folder" command highlight name change?
    On a couple of my Macs, when I give a "new folder" command, the "untitled folder" name is immediately selected/highlighted for immediate entry of the new name for the folder.
    On other Macs I have, when I give a "new folder" command, I must then manually select the "untitled folder" name before I can type in the new name.
    Does anyone know how to set my Finder so that when I give a "new folder" command it will be immediately highlighted/selected for entry of the new name?
    I'm using the latest OS-X on all of my Macs.
    Welcome to Apple Discussions:
    All my Macs select the name in the untitled folder for immediate renaming.
    Exactly what happens when your Mac does not allow immediate renaming? The only way this happens is if the folder loses focus, which can happen if another app is running and takes focus, or if you click the mouse somewhere.

  • How to make a movie start automatically and loop continuously

    Hi there,
    Two beginner questions here for a kind helpful person out there. I have searched the Encore help option but the answers all refer to menu options.
    I have exported a simple movie from Premiere into Encore. There is no menu. It if for a museum and the client wants to simply insert the DVD and for it to launch itself and then play on a continuous loop. They don't want any interactivity.
    So, my question is how do I apply a simple, 'on insert - play' rule and 'on end - go back to beginning and play' so that this happens automatically?
    Thanks in advance for any help.
    M

    Hi peachespeaches,
    rightfully, at the Menu>properties>Motion>just make sure the "Loop #:" stated "Forever" and your "Loop Point" and "Duration" will automatically adjusted when you insert the movie clip on the background of your Menu. I'm using a CS5 Encore... Trying out for very long time yet couldn't achieve it... However, I use to do it on Encore 1.5, no problem at all, it works! Just don't know why it doesn't on CS5 Encore... I'm suspecting that the software I'm holding might have some problem? Hope you are using CS5 Encore also, could you try on and let me know if it works on your side?
    Jaze,
    [email protected]

  • HELP - How to stop audio from starting when captivate loads

    Hi there,
    I'm trying to work out how to stop my audio files attached to objects (images) from playing when captivate initially loads.  I have a number of images with audio and when captivate initially loads all of the audios play at once which isn't good.  I only want the audio associated with the object to play when the user clicks the item.   
    I've been researching for days and can't find an answer.  Am I doing something wrong, or am I overlooking something.? 
    Could someone PLEASE help me with this or at least put me in the right direction.  Any suggestions will be appreciated!!!
    Jasmin 

    To achieve that you have to separate the audio from the image. The principle I explained in this article http://lilybiri.posterous.com/audio-objects-control-them
    The audio will play when the object to which it is attached gets visible. If you attach the audio to another object like a non-visible highlight box (that is my 'audio object' but you can use also a non-visible drawing object), you can set this 'audio object' to invisible in its Properties panel. When the user clicks on the click box, execute the action 'Show audio object' and the audio will play. I would even recommend using advanced standard actions over a simple action because you will be able to hide the other audio objects at the same time, and the play head will not be released - see video http://www.youtube.com/watch?v=M3nKi-DB6Fw&feature=plcp
    You have to know that hiding an audio object, will pause the audio. If you show it again, it will continue playing, not restart.
    Lilybiri

  • How to stop PSE9 from starting automatically when I turn the computer on.

    I'm running PSE9 on a imac 10.8.2
    I'm not sure why but PSE has just started opening up when I turn the computer on. How do I change this prefernce?
    Thanks
    Tara

    It could be that you have Restore Windows turned on system preferences>General. If that's not it, go to system preferences>users and groups>your account>log in items and make sure it's not in there.

  • How to have slide show play automatic and then stop?

    How do I get my iMovie to burn to iDVD without a theme and play when inserted into a DVD player automatically once and then stop?

    (From fellow poster Mishmumken: )
    How to create a DVD in iDVD without menu (there are several options):
    1. Easy: Drop your iMovie in the autoplay box in iDVD's Map View, then set your autoplay item (your movie) to loop continously. Disadvantage: The DVD plays until you hit stop on the remote
    2. Still easy: If you don't want your (autoplay) movie to loop, you can create a black theme by replacing the background of a static theme with a black background and no content in the dropzone (text needs to be black as well). Disadvantage: The menu is still there and will play after the movie. You don't see it, but your disc keeps spinning in the player.
    3. Still quite easy but takes more time: Export the iMovie to DV tape, and then re-import using One-Step DVD.
    Disadvantage: One-Step DVD creation has been known to be not 100% reliable.
    4. (My preferred method) Easy enough but needs 3rd party software: Roxio Toast lets you burn your iMovie to DVD without menu - just drag the iMovie project to the Toast Window and click burn. Disadvantage: you'll need to spend some extra $$ for the software. In Toast, you just drop the iMovie project on the Window and click Burn.
    5. The "hard way": Postproduction with myDVDedit (freeware)
    Tools necessary: myDVDedit ( http://www.mydvdedit.com )
    • create a disc image of your iDVD project, then double-click to mount it.
    • Extract the VIDEO_TS and AUDIO_TS folders to a location of your choice. select the VIDEO_TS folder and hit Cmd + I to open the Inspector window
    • Set permissions to "read & write" and include all enclosed items; Ignore the warning.
    • Open the VIDEO_TS folder with myDVDedit. You'll find all items enclosed in your DVD in the left hand panel.
    • Select the menu (usually named VTS Menu) and delete it
    • Choose from the menu File > Test with DVD Player to see if your DVD behaves as planned.If it works save and close myDVDedit.
    • Before burning the folders to Video DVD, set permissions back to "read only", then create a disc image burnable with Disc Utility from a VIDEO_TS folder using Laine D. Lee's DVD Imager:
    http://lonestar.utsa.edu/llee/applescript/dvdimager.html
    Our resident expert, Old Toad, also recommends this: there is a 3rd export/share option that give better results.  That's to use the Share ➙ Media Browser menu option.  Then in iDVD go to the Media Browser and drag the movie into iDVD where you want it.
    Hope this helps!

  • How to have list of dates automatically updated on website, without manually changing in Muse

    Hey, I'm designing a site for a band I play drums in and was wondering how I could update the list of gigs we have, without manually editing in Muse then uploading again. Is there a way of past gigs being taken off without me manually doing it?

    I believe you are referring to events with calender on page where you can update the calender showing the dates, In case you are using third party event system then Muse will not control this but if you have created that in Muse itself then you will have to manually update it from Muse.
    If site is hosted on BC then you can use events module to render the dates and details , from site end you can plan out the events and the one expired will be removed from calender.
    Thanks,
    Sanjit

  • How to have a week start on monday on the IPhone ???

    I jus want to know how can I make my week start on monay not on sunday. On ICal the week start on monday.
    Thanks in advance

    That's based on Settings > General > International > Region Format. If set to United States, the week starts on Sunday; UK week starts on Monday.

  • How to have a sequence start with specific number in mapping

    Hi,
    I can not find a way in the mapping to specify the "start with" attribute for sequence. Currently I have to execute this from sqlplus; select max(id) from tableA, then create sequence start with max(id)+1. I would like to integrate this step into owb. I'm using 9ir2. Thanks.

    You can do this from a stored procedure that you invoke from your pre-mapping trigger:
    - Scan the source and get the max_id
    - execute immediate 'drop sequence; create sequence ... start with '||max_id+1
    Etc.
    Good luck, Erik Ykema

  • Stop Skype from starting automatically on Windows 7

    Hello, I have seen some information regarding how to stop Skype from starting automatically on Macs, but for Windows 7, I have yet to see any information. If someone could provide me an answer as to how to stop Skype from opening as soon as I start my computer, that would be great. Thanks.

    alex3939 wrote:
     Found a solution! I had that problem too, but found that if I sign into my account, THEN choose tools -> options, there is a general setting tab where you can unclick "start skype when I start windows". So sign in to your account first, then click tools, options, general settings, and unclick "start skype when I start windows".see post #11 in this threadhttp://community.skype.com/t5/Windows-desktop-client/Stop-Skype-from-starting-automatically-on-Windows-7/m-p/2013293#M194838 in other words, the solution is already in this thread it's probably best to read a thread in it's entirety before posting 

  • I have word, iTunes, and other application that starts automatically when I start my laptop and how can i change start up options?

    I have word, iTunes, and other application that starts automatically when I start my laptop and how can i change start up options?

    Go to System Preferences / Accounts - Login Items.
    In order to make changes, click the lock icon bottom left corner of the pane. You may be prompted for your admin password.
    Select the apps you don't want to launch on startup then click - (minus).

  • How can I set the audio conference to automatically start AS HOST when the meeting starts?

    I can easily setup an audio conference for any meeting, and set that conference to start.  However, there doesn't seem to be a way for the conference to start as the moderator (or, host) when the meeting starts.  This means I still have to dial in to the conference with a land line or cell phone and enter my host code to get the audio conference started.
    The only audio conference provider at my company is The Conferencing Center.  I don't seem to have a TCC account.  What do I do to get this working?  It's nuts to have to use a land line just to get the audio going.

    There are a number of integrated audio providers other than TCC, and those can be enabled in the Admin section of Connect. However, using the fully integrated bridge does still require that a Host/Leader be dialled in before audio will broadcast (or something other than hold music).
    If you don't want to have to call in, I'd recommend that you use Universal Voice to tell Connect the dial in steps and give it the Host/Leader pin.Setting Up Universal Voice - Adobe Connect User Community.
    The downside to this is that there will no longer be a dial out option for participants.

  • I have Macbook pro A1286 and was wondering how to connect it to the tv and have audio?

    Like the title says, I have a 15 inch macbook pro A1286 (from mid 2009) and want to hook it up to a tv. I also know that my particular model of macbook pro doesn't support audio from the mini display.  I know that I will need a mini display to hdmi cable or converter and a hdmi cable if I decide to go for the converter for the video. I've seen both the cord (1 side is hdmi and the other is mini display just to clarify if I'm not using the right terminology) and converter online and any comments on which is better/preferred would be helpful. What kind of cable do I need to get sound to play through the tv? If you could suggest brands (unless all of them are about the same), I would be very grateful. It would be nice to know if the cords have to be specifically from apple just so I don't buy the wrong thing. If there's an easier way (less cords) to do this than hdmi feel free to say something Thanks for the help, I really appreciate it and am eternally grateful.

    connecting MacBook Pro (15-inch, Mid 2009) to Hisense TV with audio?!?!!?
    hello everyone.
    if anyone is familar with successfully getting the older macbook pros that dont support audio out to stream and preform digital audio on a TV or has any helpful information that will get me familiar with trying to successfully stream audio and visual. and can PLEASE HELP ME in any way to understand what they know and teach me how to solve my problem id really appreciate it.
    i want to connect my MacBook Pro (15-inch, Mid 2009) to my Hisense LED LCD TV, ModelNumber:40H3E  and getting digital audio sound from my TV as well as video, but have no clue on how or where to even start to successfully pairing the two and getting sound.
    I own a MacBook Pro (15-inch, Mid 2009) this MacBook model doesnt support an HDMI port. My MacBooks model has the Mini Displayport which supports video out but does not support audio out. Can someone help me by telling me exactly which Mini DisplayPort to HDMI adapter with audio will support my model MacBook Pro (15-inch, Mid 2009) and exactly what HDMI wire do i need to buy that will successfully preform digital audio and sadisfying quality visual through TV?
    i have NO expierence with the proccess have NO knowledge about any of this or these Mini DisplayPort to HDMI adapters with audio. i have no idea what kind of adapter and HDMI cord to buy that will give me sound from my tv for my type of macbook. '
    im not familar AT ALL with any of this so i hope me giving you my MacBook Pros make and model and my TV's model number will be enough information for someone to help me.
    just please give me anything you can on this topic
    thank you so much,

Maybe you are looking for