How to have both rollOver and dragOver trigger a function?

Hello I have this AS:
this.thumbHolder.onRollOver = function() {
this._alpha = 100;
this.play();
The thing I can't work out is how do I add onDragOver as well
as onRollOver?
Thanks for your time!

Similar Messages

How to have both Single and Mutilple Selection in a table?

Hi ,
I have a page with an advanced, there is a multiple selection for the table for deleting row. Now I want to have a single selection column for other purpose. But it does not seem that we can have both in a table.
If I implement SingleSelection myself by using OAMessageRadioButton, from dev guide, I need to programmatically assign radio btton all the same
name by calling setName() for each radio button and also assign an identifying value for each bean. I can radio for radio button, but how can I assign value for each radio button bean when they are in a table? Will it possible to use View Attribute of radio button bean property?
thanks
Lei

Lei, its possible to have both in ur table! You can add a single selection child to your table. Then u can add messagecheckbox as last column of table, which can be attached to a transient VO attribute.
--Mukul

I am trying to export a video from Premiere Pro. I have both audio and video checked and the sequence is active but only the audio exports. There is no video at all. Can anyone tell me how to get the video to export. It was working fine until today.

Premiere Pro CC has been working fine until today. I have completed my sequence and it is active. I have both audio and video checked when I am exporting using H.264 with Match Source Hi bitrate. I am choosing entire sequence. The audio exports but the video and title does not. Can anyone tell me how to troubleshoot this so I can complete this project? Please!

Greetings,
I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
Good Luck - Cheers,
M.

How to print both normal and bold data in a single line

Hi ,
I have requirement wherin the data need to be displayed in a single line.
FAX: Z8525_text.
where FAX needs to be in bold and Z8525_text is a standard text and it shoould not be bold , both of this needs to be displayed in
a single line.
Can you let me know how to print both normal and bold data in a single line one of which is coming fro standard text.
Regards,
Senthil

Hi Senthil,
If you are using smartforms, have a character format created for BOLD and apply it to the text you want to highlight. The remaining text of the line could be applied with a Character format which is not highlighted.
Try and revert in case you need further assistance

Have BOTH .m4a and .m4p versions of same purchased songs after re-import

Hello,
I recently had to reconstruct my iTunes library (new machine, new installation) and so I did an "Add to Library" of my library folder into an empty iTunes library. After import, I've discovered that for about 215 songs which I've purchased from the iTunes Store, I have both .m4a and .m4p versions of each of these songs. If I view the "Kind" of each song within iTunes, the .m4a shows a "Kind" of "Purchased AAC Audio File", and the .m4p version shows a "Kind" of "Protected AAC Audio File". If I show the Bitrate, each copy of each song is the same, 256 Kbps. If I view each song file in the Finder, the .m4a is about double the size of the .m4p. I have a few questions surrounding this:
1. Why are the sizes of the song files so drastically different?
2. Some time ago I took advantage of that DRM-free promotion, so I am suspecting that this may have had something to do with me having both protected and non-protected copies of these files. However, I am curious why both files now show in my library, whereas before, they did not -- only one copy showed. Does anyone know why both song copies are now showing?
3. Should I keep both of these files?
4. Is there a way to manage these files in iTunes so that only one copy shows? They both show when duplicates are hidden, because they are different, or iTunes doesn't know of the association I suppose. But of course that messes up trying to play an album -- every song plays twice.
Thanks in advance for your answers.
Brad

No--nothing gets deleted when you convert. You get two copies of the song in your library. (On Edit: I haven't done this with the latest version of iTunes. I assume nothing gets deleted just like before. To check--maybe you should convert ONE song and see if you get a duplicate in a smaller version, or just a smaller version! I've always gotten duplicates!)
I did leave out a few steps on how I do this--but if you're interested here's how I do it. Make the playlist. Then go to Edit>Select All. Then I go back to the top line: Advanced>Convert Selection to AAC. (To be able to do this you have to have your import option set to AAC 128 kps under the advanced tab in your Preferences settings. After you do the conversion make sure you set this tab back to your preferred lossless import option!)
You will get two copies of the songs in your library. Your original playlist will contain the lossless songs, so you'll have to pull the AAC songs back out into a play list. You can find them easily by sorting your library by "Kind" and then pulling the AAC files into a playlist. You can label this iPhone--or whatever.
After you load the playlist onto your iPhone, uncheck it so the songs are not duplicated in your library. If you ever want to delete them, you have to do this inside your library or the file will remain on your computer. (It does take a while to run the conversion--so I rarely delete things afterwards if I think I'm going to use the file again.)
Post back if you still have other questions.

Can I have both Lion and Snow Leopard on One Hard Drive?

My problem is I need to run a PowerPC game on Lion which Lion no longer supports. So i thought i could download Snow Leopard back to my Mac and partiition my hard drive in the process as that is the only way i know of to have both Lion and Snow Leopard. I went through the Boot Camp Asistant process and it seems it will only partition Windows 7 to my Mac when i need Snow Leopard. If anyone has any idea how to help me have both Lion and Snow Leopard at the same time on just one hard drive or figure out how to run the PowerPC programs on my Mac (if there is a way around it). The help will be well appreciated!

How To Run Snow Leopard On A New Mac
This does not apply to new Mac Minis or MacBook Airs. When newer models are introduced that also require Lion for hardware support, the techniques described below will no longer work with the possible exception of using Parallels 7.
What has to be done:
Create a new partition on the hard drive.
Get a clone of a 10.6.8 Snow Leopard system. Put the cloned Snow Leopard system onto the new partition.
Step One: Create a new partition on the hard drive
To resize the drive and create a new partition do the following:
1.    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
       After the main menu appears select Disk Utility and click on the Continue button. Select the hard drive's main entry then click on the Partition tab in the DU main window.
2.   You should see the graphical sizing window showing the existing partitions. A portion may appear as a blue rectangle representing the used space on a partition.
3.    In the lower right corner of the sizing rectangle for each partition is a resizing gadget. Select it with the mouse and move the bottom of the rectangle upwards until you have reduced the existing partition enough to create the desired new volume's size. The space below the resized partition will appear gray. Click on the Apply button and wait until the process has completed. (Note: You can only make a partition smaller in order to create new free space.)
4.   Click on the [+] button below the sizing window to add a new partition in the gray space you freed up. Give the new volume a name, if you wish, then click on the Apply button. Wait until the process has completed.
You should now have a new volume on the drive.
It would be wise to have a backup of your current system as resizing is not necessarily free of risk for data loss. Your drive must have sufficient contiguous free space for this process to work.
Step Two: Obtain a clone of a Snow Leopard system:
You will need access to a Mac already running Snow Leopard. You will need a 16 GB USB flash drive or an external hard drive to which you can clone the Snow Leopard system from the Mac that has Snow Leopard installed. Alternatives are:
Option One:
Install a new Snow Leopard system onto a USB flash drive. Boot the Mac used for installing with the USB flash drive. Update the flash drive system to 10.6.8 using the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard. Verify that you can boot the Mac with the USB flash drive.
Take the USB flash drive to your new Mac and try booting from it. If it works then clone the system from the flash drive to the newly made partition:
          Clone using Restore Option of Disk Utility
Open Disk Utility from the Utilities folder.
Select the destination volume from the left side list.
Click on the Restore tab in the DU main window.
Check the box labeled Erase destination.
Select the destination volume from the left side list and drag it to the Destination entry field.
Select the source volume from the left side list and drag it to the Source entry field.
Double-check you got it right, then click on the Restore button.
          Destination means the new partition on the internal drive. Source means the USB flash drive.
Option Two:
If you have a large enough external drive you can erase and use, then it would be easier to just clone the entire Snow Leopard system from the source Mac computer to the external drive.
          Clone using Restore Option of Disk Utility
Open Disk Utility from the Utilities folder.
Select the destination volume from the left side list.
Click on the Restore tab in the DU main window.
Check the box labeled Erase destination.
Select the destination volume from the left side list and drag it to the Destination entry field.
Select the source volume from the left side list and drag it to the Source entry field.
Double-check you got it right, then click on the Restore button.
          Destination means the external drive. Source means the Snow Leopard Mac's internal drive.
After cloning verify that it will boot the source Mac. If so then take the external drive to your new Mac boot with it. If all is well then restore the clone to the new partition on your new Mac:
          Restore the clone using Disk Utility
Open Disk Utility from the Utilities folder.
Select the destination volume from the left side list.
Click on the Restore tab in the DU main window.
Check the box labeled Erase destination.
Select the destination volume from the left side list and drag it to the Destination entry field.
Select the source volume from the left side list and drag it to the Source entry field.
Double-check you got it right, then click on the Restore button.
          Destination means the new partition on the internal drive. Source means the external drive.
If the above seems too daunting then you might consider running Snow Leopard inside an emulator such as Parallels 7. You are permitted to install a single copy of Snow Leopard inside a virtual machine. You will need to first purchase a copy of Parallels 7 and install it on your new Mac. Create a new virtual machine configured for Mac OS X. You may then install Snow Leopard in the virtual machine then download Mac OS X 10.6.8 Update Combo v1.1 and update to 10.6.8. Be sure to include Rosetta in your initial Snow Leopard installation. Rosetta is not installed by default rather it's an optional install.

I'm an American living on a timed (though long-term) assignment in Ireland. I have both American and Irish bank accounts and addresses. I have two Qs. 1. Can I use the US Adobe site when in Ireland? Or will my physical location prevent me from doing so? 2

I'm an American living on a timed (though long-term) assignment in Ireland. I have both American and Irish bank accounts and addresses. I have two Qs. 1. Can I use the US Adobe site when in Ireland? Or will my physical location prevent me from doing so? 2. I am working for a not-for-profit organization. Is there a special pricing plan for non-profits, similar to the plans for students, small business, etc? Thanks for whatever help you can give me. (P.S. As a potential customer and past user of Adobe products for 15 years, I find it INCREDIBLY FRUSTRATING that I cannot speak with any Adobe representative, but am continually re-routed instead to a public forum to get what I hope will be accurate information. Not good, Adobe. Your products are amazing. Your customer service leaves a lot to be desired. I don't mean that with disrespect, but as honest feedback.)

Hi bookchic
Thanks for your feedback.
Non-profit pricing is available to eligible institutions via the VIP program which is sold by resellers - see Eligibility guide
For details of resellers please check here: Adobe Platinum Partners – Value Incentive Plan
If you wish to purchase an individual plan via Adobe.com the country of your Adobe ID will determine which site you order from.
Kind regards
Bev

How to populate both key and text in drop down list in dialog prog screen

Hi, Can anyone please advice how to display both key and text in the drop down list in dialog prog screen. I tried with below code. keys and texts are getting populated in values table but only text is appearing when click on drop down. need to display both key and text in the drop down. Thanks in advance.
TABLES: ZRPP_MODELS, ZRPP_FFLSTRATEGY.
TYPE-POOLS : VRM.
DATA : field_id TYPE VRM_ID ,
       values   TYPE VRM_VALUES,
       value    LIKE LINE OF values.
FORM fill_model_list .
select MODEL MODEL_DESC from ZRPP_MODELS into value.
    APPEND value TO VALUES.
endselect.
CALL FUNCTION 'VRM_SET_VALUES'
    EXPORTING
      id     = 'ZRPP_MODELS-MODEL'
      values = values.
ENDFORM.

You need to concatenate KEY & VALUES
wa_values-key = '1'.
wa_values-text = '1 - One'.
append wa_values to i_values.
wa_values-key = '2'.
wa_values-text = '2 - Two'.
append wa_values to i_values.
wa_values-key = '3'.
wa_values-text = '3 - Three'.
append wa_values to i_values.
call function 'VRM_SET_VALUES'
    exporting
      id              = 'LIST_BOX'
      values          = i_values
    exceptions
      id_illegal_name = 1
      others          = 2.
a®

HT204414 How to import both iPhoto and Aperture library to iCloud Photo Library (Photos app)

Hi all,
Based on the article here (Designate a System Photo Library in Photos - Apple Support) has anyone tried to bring both an iPhoto and Aperture library into iCloud Photo Library so that both libraries are available as one in iCloud and form the one Photos app library rather than being seen as separate libraries. I don't want the two separated as I have 200GB's of space in iCloud which is plenty to hold the two's collective space of about 40GB's.
It seems as though the procedure is pretty simple.
First of all set one of your libraries as the System Photo Library, this will happen naturally with setting up Photos app for the first time. I chose iPhoto as the original library.
Let this library upload all it's photo's to iCloud over a few minutes, hours, days etc.
When finished, enter your other library by closing Photos app and reopening while holding down the Option key (usually Alt). In this case I now opened the Aperture library that it had found.
Under Preferences > iCloud set this library as the System Photo Library and in turn it will have the ability to upload to iCloud.
When it's finished I suppose you will have both iPhoto AND Aperture pictures in the one iCloud Photo Library.
At least I hope the above makes sense.
Anybody already tried this with good / bad results, let us know here.

found it here - 'If you designate a new library as the System Photo Library and then turn on iCloud Photo Library, the photos and videos in the new library will merge with those already in your iCloud Photo Library. If you want to keep the contents of your photo libraries separate, don’t turn on iCloud Photo Library for more than one library in Photos.'
That bit seems clear. You can merge photos from different libraries by making them 'designated' first .
BUT this means that Photos app only shows you library A , or library B, depending on which one you have opened , but Icloud library contains photos from Both library A and library B .
is this correct ?
and if so, does it not get a but confusing ?!?

Can we have both 9i and 10g db running on the same machine

Hi,
I want to to exp/imp upgrade of my 9i db to 10g db.
Can I have both 10g and 9i installed on the same server?
Thanks,
Kavitha

Yes, provided that the HW, OS version and Patch level are certified for both 9i and 10g.
Install 10g into a seperate ORACLE_HOME -- whether under the same "oracle" account or a different (e.g. "oracle10g" account).
However, you should consider 11g as 10g is being desupported this month (i.e. no new patches / fixes will be available for 10g)
Hemant K Chitale
Edited by: Hemant K Chitale on Jun 9, 2010 10:58 AM

I am using PS cs6 and lightroom and I am having a hard time know what color space to choose. The lab that I am using told me that their color space is sRGB. Do I need to have both PS and Lightroom set at sRGB or should I have PS set at adobe RGB and jus

I am using PS cs6 and lightroom and I am having a hard time know what color space to choose. The lab that I am using told me that their color space is sRGB. Do I need to have both PS and Lightroom set at sRGB or should I have PS set at adobe RGB and just set my export from lightroom as sRGB?

Please post in the Photoshop forum.
http://forums.adobe.com/community/photoshop
Bob

I have both Iwork and Microsoft Office (had to have it for school) on my macbook pro. Can I uninstall Iwork from my computer and reinstall it at a later date from the disc.

I have both Iwork and Microsft Office (had to have it for school) on my Macbook Pro. Can I uninstall Iwork on my computer and re install it at a later date from the disc, or was it a one time install

KBowman0526 wrote:
Can I uninstall Iwork on my computer and re install it at a later date from the disc
yes.

How to have more months and years appear for selection in the archives for blog posts?

Hello,
How to have more months and years appear for selection in the archives for blog posts? It just shows past 3 months in the year 2014, but we have many blog posts in years 2013, 2012 and 2011 and further back. I am using the OOB SharePoint blog
feature.
Paul

Hi,
Thanks for the reply; it doesn't add anything as RSA6 was one of the options I listed and this was my fall back option if there was no other special treatment for the COPA datasources.
I have found out why this, and other fields, are not available in KEB0. The program uses a Function called KERA_COPA_METADATA_INTERFACE within which there is a section that selects the COPA fields:
***** 1. RULES (choice/class)
* set rules for fixed fields
PERFORM COPA_SET_RULES_FIXED_FIELDS USING I_ACCTCOST
                                      CHANGING E_T_RULES[].
When you look at this code section there is a hard coded list of fields to exclude:
MRULE 'MANDT     ' NEVER FORGET_IT NEVER FORGET_IT.
MRULE 'PAOBJNR   ' NEVER FORGET_IT NEVER FORGET_IT.
MRULE 'PASUBNR   ' NEVER FORGET_IT NEVER FORGET_IT.
MRULE 'PAPAOBJNR ' NEVER FORGET_IT NEVER FORGET_IT.
MRULE 'PAPASUBNR ' NEVER FORGET_IT NEVER FORGET_IT.
MRULE 'HRKFT     ' NEVER FORGET_IT NEVER FORGET_IT.
MRULE 'HZDAT     ' NEVER FORGET_IT NEVER FORGET_IT.
MRULE 'USNAM     ' NEVER FORGET_IT NEVER FORGET_IT.
MRULE 'RKESTATU ' NEVER FORGET_IT NEVER FORGET_IT.
MRULE 'TIMESTMP ' NEVER FORGET_IT NEVER FORGET_IT.
MRULE 'PERDE     ' NEVER FORGET_IT NEVER FORGET_IT.
MRULE 'PERIO     ' OBLIGATORY CHAR_CE3 OBLIGATORY CHAR_CE3.
MRULE 'COPA_AWTYP' NEVER FORGET_IT NEVER FORGET_IT.
MRULE 'COPA_AWORG' NEVER FORGET_IT NEVER FORGET_IT.
As this is a standard delivered SAP function I do not recommend that you change this code as you will invalid your SAP support and upgrade paths.
Thanks
Neil

I forgot my passcode to reset and erase the data . how i have to reset and erase data on my ipad mini

i forgot my passcode to reset and erase the data . how i have to reset and erase data on my ipad mini

Do you have a question? Is your iPad disabled?
How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

Does NI-6008 have both scan and channel clocks ?

Does the NI-6008 have both scan and channel clocks whose rate can independently be set in LabVIEW ? I would like to acquire say 100 samples on one channel at 10 kHz and repeat this at 10 Hz rate. So 100 samples would be acquried at a 100 usec interval period (channel clock), then there would be a gap in time where no samples are acquired, then this process repeated again 100 msec (scan clock) later.
Steve

SteveP,
"Does the NI-6008 have both scan and channel clocks whose rate can independently be set in LabVIEW ?"
Yes and No. You can set the sample rate (scan rate) on the
USB-6008/6009 but you cannot set the convert clock rate (channel clock)
on the USB-6008/6009.
Also, you cannot use an external clock with the USB-6008/6009 (in both the DAQmx driver and the DAQmx Base Driver).
The lack of both these feature limits you to one option to complete the task you want.
If you want to take 100 samples at 10kHZ every 100msec (10Hz) then you
will have to do a conintuous acqusition at 10kHz and use post
processing to drop the samples you do not need.
I hope this helps,
Lorne Hengst
Application Engineer
National Instruments

How to have both rollOver and dragOver trigger a function?

Similar Messages

Maybe you are looking for