How to have confirmed quantity 0 for credit blocked sales orders

Hi!
I have the following problem. I have one sales order blocked because credit. Using material A the quantity confirmed is 0 but using other material B the quantity is confirmed. All the materials have no avaliability check group no arelevant for vailability .
How can I customize in order to always have quantity confirmed in 0 for sales orders bloked because credit check?
Thanks in advance for your help!
Regards,
Marina.

I resolved the issue

Similar Messages

Confirmed Quantity for Item in sales order

Dear All,
In one sales order there is confirmation block (this is through the delivery block in the sales order header level).
The sales order contains BOM (header and it's sub items) and some standard items also two third party items.
When the sales order is saved there are no confirmed quantity for any of the item except the BOM header.
May I know what could be the reason to have this BOM header confirmed quantity..??? this is leading to a problem in the data from sales order.
Is there any customizing related to this item (item category or schedule line category) to look out for..??
Thanks & Regards,
Vishi...

hello, friend.
your issue is quite broad. outcome depends on -
1. configuration of delivery block (which, in your case, we can assume to include confirmation block)
2. selection of availability check and MRP type in material master
3. schedule line category and schedule line determination
now in standard, if the order line item category is TAN, and MRP type is PD and availability check is PD... the system might temporarily confirm the item even when putting a delivery block at header level, but the system should delete confirmed quantities when you save the order. you can check the confirmed quantities when you open the sales order in change mode... the confirmation should be zero.
however, in third party items (item category TAS), these items are normally confirmed even in change mode. this may hold true if either MRP = none (e.g. ND) and/or if availability check is KP (no check).
nevertheless, regardless of confirmation quantity, the system should not allow creating of delivery while delivery block is in place.
please try these scenarios and post your feedback.
regards.
jy

MRP Run For Credit Blocked Sales Orders

Hi
Does any one know how to prevent the generation of planned orders for Sales orders which
have been credit blocked. At the moment the reservation is still visible on MD04 and is therefore
planned during the MRP run. As a result manufacturing continues for these sales orders.

As far as credit block is concern; what it means is that delivery will not be done for this customer via VL01N.
This means if you have blocked this customer in FD32; no delivery to be done
It may not be linked with MRP calculation b'cos it comes into picture while doing delivery & not during planning
Rgds

Credit blocked sales order and shipping due list

Hello all,
We would like to see credit blocked sales order in the shipping due list (VL10C)
First we have modified a user exit to have schedule lines quantity confirmed even when the sales order is credit blocked. It works fine but still the schedule lines do not appear in the shipping due list.
Do you know some way to make this lines appear in the shipping due list ?
Thank you in advance.

hello, friend.
i believe that you can configure the system in such a way that even if a sales order is blocked for credit, the requirements will still be passed on to PP/MM. however, as long as the delivery block (for credit reasons) remain in the sales order, this order will not appear in delivery due list.
i have to ask you: if you want the blocked order to appear in delivery due list, why block the order at all? an alternative to listing orders still not delivered would be to use t-code VA05 or VA05N and specify 'open' orders.
hope this helped.
regards.

Problem for releasing blocked sales order on Creditlimit

Hi Gurus,
        I a   hve a problem for releasing blocked sales orders
         what i have done: 1)i have blocked sales order based on exceeded creditlimit
         (i have change SDType in 'OVAK' is 'C')
                  2)now i have to release for furthur processing so i have done following steps
                  3)Goto VKM3/VKM1 T.Code and then release what order that is blocked.
                  4) order will appear in the list.
                  5)Select that one.
                  6)Click on the green flag that appears on the left hand side.
                  7)Click on save.
                  8)click on back it will ask for "Leave list".
                  9)Click on yes.
                  10)It said that Sales orer has been released
Still what my problem is:
Problem: 1)So i'm trying to create deliver for Sales order but it shows an error
         2)"Sales order is blocked for delivery: Credit limits" Even it was released
Plz kindly help me what i do....
Thanks In Advance
sivakumar

sorry   i was unfotunately put this thread here over in SD

Workflow in the releasing of Credit blocked sales orders.

Hi All,
My Client requirement is that they need workflow in the releasing of credit blocked sales orders.
If once sales order is blocked then it should be approved at 3 levels, then only it should be released.
Suggestions are highly appreciated
Regards,
Kumar

Hi Kumar,
I think you can achieve this by using Authorization Concept.
Please find the below link
http://help.sap.com/saphelp_nw04/helpdata/en/52/671285439b11d1896f0000e8322d00/content.htm
Authorization levels for Credit Rep Groups
Thanks
Dasaradha
Edited by: dasaradha ramireddy on Nov 28, 2011 12:53 PM

Credit blocked sales order in ECC

Is there a standard way to prevent a credit blocked sales order from flowing to APO, from ECC?
Thanks,
Satish

Hi Satish,
The only way to restrict an order line item to APO is to assign a reason for rejection to it..
The other way is to identify a credit block in ECC sales order out bound exit EXIT_SAPLCSLS_002 and delete the sales order in the CIF.
Regards
Vaibhav

BOP results for credit blocked customer orders

Hello all,
We are facing an issue with BOP. We use the backorder processing in order to confirm the customer orders quantity. When the customer order has a credit block status, the quantity is apparently confirmed in result work list (immediately comes after BOP run) and using transaction /SAPAPO/BOP_RESULT, but in table /SAPAPO/BOPRESLT the fields CNFQTY and NEWCNFQTY are empty.
Is it possible to change this behavior?
Thaks in advance.
Regards,
Januario Faria

Hello All,
My issue was solved using the suggestion below posted on the thread - Sales Order Credit Status Block with Schedule Line ATP Confirmed Quantity .
We modified this SD configuration and the quantity has to be confirmed to sales orders with credit block using BOP processing.
Thanks to all.
Bests regards.
Januario Faria
link:
[Sales Order Credit Status Block with Schedule Line ATP Confirmed Quantity;
Hi ,
Please go to Transfer of requirements-->maintain requirements for transfer of requirements and remove the 101 Routine number so that when credit block on order still the quantity is confirmed to sales order. Because of this Routine it is removing the reservation while in credit block.
I have tested it and it is working. I have similar scenario and it is working fine.
Regards
Raj

How can I reserve stock for a specific sales order?

We would like to reserve stock for a specific sales order X which must be delivered next month. I have created a reservation (trx. MB21) for sales order X (movement type 231). MD04 list shows the reservation and decreases ATP stock. Stock is blocked for allocation to other sales orders. So far, it works as required. But: I cannot deliver sales order X either! It is possible to post GI for the reservation but there is no link to sales order X. It is still not possible to deliver sales order X. I thought entering the sales order number in the reservation would link the reservation to the sales order but appearently it is not.
Does anyone know if it is possible to use reservations for reserving stock for sales orders? If yes, how does it work?
If not, is there a way to reserve stock for future issue of a specific sales order or for a specific customer?
Regards,
Mariët
PS We confirm all sales orders. Stock allocation / ATP-check only takes place at delivery creation.
Edited by: Mariet on Jul 11, 2008 2:35 PM

Hi Csaba,
Thanks for your reply. We are not going to work in MTO environment because we do not make/purchase to order... I will explain our process/requirement in detail:
Normaly a customer orders our products and we deliver from stock. Sometimes a customer calls and informs us that he needs an extraordinary large amount of the product next month. Customer tells us that it is very important that the full quantity is available that date. For us it is no problem to purchase that amount of products in time but we must avoid other customers to take away the stock. Since we confirm all sales orders and do not allocate stock to sales orders, I am looking for a solution to 'reserve' that amount of stock for that specific customer to be available at that specific date (next month).
I tried to use reservations but then I need a sales order number, so that's why I created a sales order with delivery date next month. I created a reservation (movement type 231, sales order number X + sales order item number). Unfortunately the stock can still be assigned to other customers/sales orders... (I was expecting that only sales order X could use this reserved stock...).
Do you know if reservations can be used for this purpose? I do not need a sales order (I only created it because I need to enter a sales order + item in the reservation), if there is a way to reserve quantity for a specific customer this would be a good solution for us as well.
Thanks in advance for your advise.
Regards,
Mariet

Confirmation Quantity issue while creating Sales order using BAPI

Hi SDN,
Can anyone of you help mein the below issue:
I have a program to create a sales order using upload file. for this i use "BAPI_SALESORDER_CREATEFROMDAT2" & for changing existing "BAPI_SALESORDER_CHANGE".
Now If the upload file contains the Same Material, Based on other conditions, it needs to create Multiple sales order.
When the first Salesorder is created, the Quantity is getting confirmed (Confirmed quantity VBEP-BMENG). But during actual run, since the confirmation is getting done for the same material in the above Sales order, the confirmation is not being done in the subsequent Sales order".
This poses a problem for business, user need to manual refresh the u201Cconfirmed quantity for each line item in the particular SO where it failed during program upload.
Also while uploading using the BAPI, if we wait forsometime after creating the first sales order in Debug, then the above material is unlocked & the confirmation quantity is done for the subsequent sales order also.
But in the actual run, this is creating a problem. Some Refresh or Unlocking problem.
Can you please suggest a suitable solution for this issue.
Thanks & regrads,
Chaitanya LBK

Have you tried backorder processing?
V_V1
V_V2
V_RA
V_R1
V_R2

How to use the BAPI_GOODSMVT_CREATE for Transfer posting Sales order

Hi Friends,
How to use the Bapi BAPI_GOODSMVT_CREATE for transfer posting sales order to sales order.
pls, send the list of parameteres to pass to the bapi, if program avail please send it to me.
Thanks in advance
Shankar

You have to pass Header and GM code as the INput parameters for uing this BAPI....GM code would be structure.
Also you have to pass the INternal table Item for the goods mvt cxreate which will contains
      BATCH.
      MOVE_TYPE.
      ENTRY_QNT.
      MOVE_PLANT.
      MOVE_STLOC.
      MOVE_BATCH.
      MOVE_REAS
these parameters.
Regards,
Sushil.

How to find Handling unit for a given Sales order...

From which table can we find the Handling unit for a given Sales order?

hi this will help u.
SALES AND DISTRIBUTION TABLES
KONV Conditions for Transaction Data
KONP Conditions for Items
LIKP Delivery Header Data
LIPS Delivery: Item data
VBAK Sales Document: Header Data
VBAP Sales Document: Item Data
VBBE Sales Requirements: Individual Records
VBEH Schedule line history
VBEP Sales Document: Schedule Line Data
VBFA Sales Document Flow
VBLB Sales document: Release order data
VBLK SD Document: Delivery Note Header
VBPA Sales Document: Partner
VBRK Billing: Header Data
VBRP Billing: Item Data
VBUK Sales Document: Header Status and Administrative Data
VBUP Sales Document: Item Status
VEKP Handling Unit - Header Table
VEPO Packing: Handling Unit Item (Contents)
VEPVG Delivery Due Index
with regards,
Hema Sundara,
pls reward if u find it helpful.

How to findout lot number for a given sales order number

Hi,
My requirement is to display lot numbers for a given sales order number.
Thanks,
Bala.

select a.line_number, c.lot_number from oe_order_lines_all a, mtl_material_transactions b, mtl_transaction_lot_numbers c
where a.line_id=b.trx_source_line_id
and b.transaction_id=c.transaction_id
and a.line_Id=&your_line_id;
and b.transaction_type_id in (33, 34, 52) sales order shipment or internal order shipment or staging etc.,
If this is for shipped sales order, you can alternatively get it from wsh_delivery_details (does not work for dropships and inventory interface cases)
Thanks
Nagamohan

Credit Blocked sales orders during MRP

Hi Team,
I don't want to create PR's during MRP, if the sales orders(Make to orders-sales orders) are under Credit Block/Hold.
Give your inputs !!
Thanks,
Kumar Arcot

As far as credit block is concern; what it means is that delivery will not be done for this customer via VL01N.
This means if you have blocked this customer in FD32; no delivery to be done
It may not be linked with MRP calculation b'cos it comes into picture while doing delivery & not during planning
Rgds

How to have a custom Item Number in Sales Order Items

Hello Experts,
We are creating a sales order using IDoc, sales order gets created but, its not taking value what we are populating in Item Number field for Item. Defualtly its filling 10,20 and so on...
Is there any thing that I need to maintain, so that SAP accepts the custom number for Item number.
Please help,
Thanks,
Suma

Hi Suma,
In VOV8, you can see the fields Number system..here u can see sub item increment u can enter 12 here then the next item number will be 500012, 500024 and so on. But if u want to maintain external number range then follow this steps.
Determine which external number ranges are provided for the relevant
document type. Choose the function "Maintain number range" of the
document type (for example: Purchase order -> Maintain number range)
for this purpose.
Choose a number range and note its number.
Enter the number of the desired number range.
Thanks,
Raja

How to have confirmed quantity 0 for credit blocked sales orders

Similar Messages

Maybe you are looking for