How to have correct report from CP5?

Hello experts,
I have a survey quiz from CP5, how ever when I check on report it shows nothing.
Can anyone help me to find out how to set this thing right?
Thanks many.

By default, survey questions in Captivate don't have scores attached, whereas graded questions do. Both types can report to an LMS. But only Graded questions report scores.
Changing the question type from Graded to Survey basically takes away the ability for the question to be given a score or marked Correct or Incorrect.
Note the captures below for exactly the same question with just a change to the Question Type:
This is Survey:
This is Graded:

Similar Messages

How to run a report from oracle 10g form in .csv format

dear all,
how to run a report from oracle 10g form in .csv format? i've already run in pdf & excel format.
i'm using
SET_REPORT_OBJECT_PROPERTY (ro_report_id, report_desformat, 'PDF'); --for pdf
SET_REPORT_OBJECT_PROPERTY (ro_report_id, report_desformat, 'SPREADSHEET'); ---for excel
Please Help..

i have already tried.
but the report show in htm or html format. that file will not save into csv. please help.

How can print a report from form 6i, when I press a button?

hi Friends,
How can print a report from form 6i, when I press a button?
When i press a button from Form 6i, the report should print through printer.
I have done it by using report parameter DESTYPE Printer but problem is that when I press a button printer dialogue box appear and then I give command Print to printer, I don’t want to show Printer dialogue box.
I want when I press a button form Forms 6i , printer will print my report directly.
Please send me the solution of this problem.
Best regards,
Shahzad

Hi
If You are using Client server application then to passing to Add all Print Parameter in the Host Command.
Means Print command in unix to Host(lp.............) and Other Parameter to file name of the report to print.
If You not Use Client Server Application the Also Passing a Host Command in Button-Pressed Event and Run.

How to invoke crystal reports from Oracle forms 11g R2 along with passing p

How to invoke crystal reports from Oracle forms 11g R2 along with passing parameter to it.
how to pass parameters to crystal report, please help.

how to pass parameters to crystal report, please help.This would entirely depend on crystal reports and you might find informations on crystal reports related communities more likely...I for one have seen crystal reports the last time about 12 years ago. And even back then I simply acknowledged it's existence instead of working with it.
Maybe crystal reports can be invoked via a URL call which would make it simple as you'd need simply build an URL and show the report using web.show_document. But that's pure speculation. Also you might not be the first with this requirement, so the solution to your problem might be right under your nose and just a little google search away ;)
cheers

How do I launch report from menu using RUN_REPORT_OBJECT?

Hi all,
Re: How do I launch report from menu (and have it print to the screen) using RUN_REPORT_OBJECT?
I am using Oracle 9iAS on Windows 2000 and I have a similar problem with launching reports from the menu. The application should call the report via the RUN_REPORT_OBJECT builtin feature from Forms. The report is never displayed.
The report is in the same folder as the menu form calling it. Do the reports have to be in a specific format? How do I get the report_id?
The name of the report is seconds_calls. No user-specified parameters are passed. Also, the report object in the object navigator in Forms is Report4 (is this relevant?)
When I try to run report via the form using this code:
DECLARE
     report_id REPORT_OBJECT;
     rep_status VARCHAR2(200);
     v_rep VARCHAR2(100);
     report_job_id VARCHAR2(200);
--     job_number NUMBER;
--     server_name VARCHAR2(200) := 'repserver';
BEGIN
     report_id:= FIND_REPORT_OBJECT('seconds_calls');
     rep_status:=REPORT_OBJECT_STATUS(report_job_id);
     v_rep := RUN_REPORT_OBJECT(report_id);
END;
I get this error message:
FRM-41219 Cannot find report:Invalid ID
And this message
FRM-40738 Argument 1 to builtin RUN_REPORT_OBJECT cannot be null
When I tried to use the same code (above), substituting the object name for the form name,
I got these messages:
FRM-41219 Cannot find report:Invalid ID
FRM-40738 Argument 1 to builtin RUN_REPORT_OBJECT cannot be null
And FRM-10259 Invalid null argument to packaged procedure or function (???)
Any ideas?
Cheers,
Pippa

Philippy,
substr(v_rep,instr(v_rep,'_',-1)+1)
This code extracts the Reports job id from the Reports Server name. The run_report_object() built-in
retrieves e.g. RepServ_9 as a job id, but in Reports9i you only need the '9' as a value to retrieve the
output.
Use the following sample a template. It is a procedure that expects the reports object name, teh reports server name and the
output format as an argument. The call to Web.show_document expects the ReportsSrevices to be accessible from teh same server
(relative addressing is used)
PROCEDURE RUN_REPORT_OBJECT_PROC (vc_reportobj Varchar2, vc_reportserver varchar2, vc_runformat varchar2) IS
v_report_id           Report_Object;
vc_ReportServerJob      VARCHAR2(100); /* unique id for each Report request */
vc_rep_status      VARCHAR2(100); /* status of the Report job */
vjob_id               VARCHAR2(100); /* job_id as number only string*
BEGIN
/* Get a handle to the Report Object itself. */
v_report_id:= FIND_REPORT_OBJECT(vc_reportobj);
SET_REPORT_OBJECT_PROPERTY(v_report_id,REPORT_COMM_MODE,SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(v_report_id,REPORT_DESTYPE,CACHE);
/* Define the Report output format and the name of the Reports Server as well as a user-defined parameter, passing the department number from Forms to the Report. We don't need a parameter form to be displayed, and therefore paramform is set to "no". */
SET_REPORT_OBJECT_PROPERTY(v_report_id,REPORT_DESFORMAT, vc_runformat);
SET_REPORT_OBJECT_PROPERTY(v_report_id,REPORT_SERVER, vc_reportserver);
SET_REPORT_OBJECT_PROPERTY(v_report_id,REPORT_OTHER,      'p_deptno='||:dept.deptno||'paramform=no');
vc_ReportServerJob:=RUN_REPORT_OBJECT(report_id);
/* remove the Reports Server name from teh job id */
vjob_id := substr(vc_ReportServerJob,length(reportserver)+2,length(vc_ReportServerJob));
/* Check the report status if finished. */
vc_rep_status := REPORT_OBJECT_STATUS(vc_ReportServerJob);
IF vc_rep_status='FINISHED' THEN
/* Call the Report output to be displayed in a separate browser window.
The URL for relative addressing is only valid when the Reports Server
is on the same host as the Forms Server. For accessing a Remote Reports
Server on a different machine, you must use the prefix http://hostname:port/ */
WEB.SHOW_DOCUMENT ('/reports/rwservlet/getjobid '||vjob_id ||'?server='vc_reportserver,'_blank');
ELSE
message ('Report failed with error message '||vc_rep_status);
END IF;
END;
Frank

How to migrate webanalysis reports from System 9.2 to System 11

how to migrate webnalysis reports from 9.2 to Hyperion System 11. I know the migartion utility only works for Pre system 9 products. We have new env of sytem 11 and succesfully migrated planning and HFM from 9.2 to system 11. How to migarte webanalysis reports.

Have you been able to resolve this ?
There are various approaches possible, depending on the amount and the folder structure of your reports.
One is to use life cycle management (not sure how stable it is in 9.2), the other is the import/export tool within web Analysis
Hope this helps,
Jeremie

How to move a report from one account to another account

Dear all ,
How to move a reports from one account to another account.
These are reports sent automatically. Unfortunately, I do not know where to find them and how to export to another account.
Puru

Hi,
You can use the Transaction SCC1 to move the data from One Client to Another Client for a Client dependent table.
The data should be present in a Transport and you can import to Transport to any client using SCC1.
Contact the Basis team to know how to use SCC1.
Regards,
Aj

How to call BI report from web dynpro

Hi ,
How to call BI report from webdynpro application and what are the prerequisites for that .
Please provide an example to work with BI application frame UI element
Thanks

Hi Rajpal,
Please go through this..
calling BI report
Cheers,
Kris.

How to deactivate stocks report from pull down?

how to deactivate stocks report from pull down bar?

Unlock the phone so the home screen displays.
Pull down the notification screen.
Select the "Today" tab.
Scroll down to the "Edit" button.

How to call crystal report from plsql

How to call crystal report from plsql?

http://asktom.oracle.com/pls/ask/f?p=4950:8:14685899341865976974::NO::F4950_P8_DISPLAYID,F4950_P8_CRITERIA:952229840241,

**How to call a report from a form by passing a specfic value?????

Hi Expert,
I want to call a report from a form.My problem scenario like, a user is login to his account and there is a option called ADMIT CARD(Push Button).Now when he pressed the button a report will generate.I want that when he pressed the button the user id of the user will passed to the report and the report will generate corresponding to his details which was stored in the database.This scenario is like any online admit card.
Suppose I want a details report of employee whose employee_id=100.How could I pass this value(employee id) to report which will generate a report details.
Thanks,
TAPAN
Message was edited by:
user630863

Thanks for replying.
Actually I am a beginner.I think that I have to use RUN_REPORT_OBJECT built-in.But I cannot understand the parameterlist.Can u plz give me any example or code then I am very thankful.
Suppose I want a details report of employee whose employee_id=100.How could I pass this value(employee id) to report which will generate a report details.
Thanks,
TAPAN

How to call a report from a web application

Hi,
I have a web server in wich is installed Reports 6i. My question is how can I call reports 6i to generate a pdf using a .rep file from my web application (built with java)?

Hi,
The below link will be very useful for one who need idea on calling Oracle Report from Java Application,
http://www.oracle.com/technology/products/reports/htdocs/getstart/examples/reportswebservice/index.html
Thanks & Rgds,
M T

How to trigger crystal report from SAP ECC

Hi All,
I hope i m right forum to ask this question.
we want to do label printing from Crystal reports. data will be present in SAP ECC .
So I below issues
1 ) how to connect SAP ECC database with Crystal Reports.
2 ) how to trigger print output in Crystal reports from ECC , lets say I create a Delivery In ECC , the print output will be issued to Crystal report and I should get a print out Immediately ( for printing - printer will be connected to local system and SAP network printer ) .
I have worked with this type of scenario in smarforms , adobeforms. but not with Crystal Reports ...
Regards
Yashpal Gupta.

Hi Yashpal,
First thing you need to do is install the Connector on both your work station where you run Crystal Reports as well as the SAP Server where the data is.
So I moved your post to the SAP Integration Kit forum.
Need to know what version of Crystal Reports you are using?
Search of browse here, lots of info on how to...
Thanks
Don

How to call a report from a jsp page

Hi
1) Can anyone please tell me how can i view Discoverer report from a jsp page instead of opening it directly thru plus/viewer.
2) Please clarify do i need to install Infrastructure and OID for it.
Please advice.
Thanks

You need the AS infrastructure if you want to use connections. If you do not intend using connections, you do not require the infrastructure.
Note that you cannot pass in passwords in the URL any longer. You do not need to pass passwords if you pass in a Discoverer connection id (but then again - if you don't use connections, then you do need to still pass in the connection information - username, password, database, language, EUL)
I have a post on my blog that describes how to pass a password using an HTML Form submit - http://oraclebi.blogspot.com/2005/08/passing-password-to-viewer.html
Thanks
Abhinav
Oracle Business Intelligence Product Management
BI on Oracle: http://www.oracle.com/bi/
BI on OTN: http://www.oracle.com/technology/products/bi/
Discoverer: http://www.oracle.com/technology/products/discoverer/
BI Software: http://www.oracle.com/technology/software/products/ias/devuse.html
Documentation: http://www.oracle.com/technology/documentation/appserver1012.html
BI Samples: http://www.oracle.com/technology/products/bi/samples/
Blog: http://oraclebi.blogspot.com/

How to call a report from a menu ?

I am converting 6i client/server forms to 9i.
I have a menu that has an option on it to run a report for each menu item selected using RUN_PRODUCT.
9i is making this obsolete, so how can I call a report from a menu (not a form) now then ?
In a form it is fine cos I just use the Report Object - a menu does not have this facility.
Thanks in advance.

Hi,
so here is how this should be done:
1. Create a Reports node in the Forms module that uses the menu (you don't have to create one Reports Object for each report that you want to run)
2. From the menu, before calling Run_Report_Object() use Set_Report_Object_Property() to set the phsical file name of the Reports that should be executed. This is kind of best practice and does not have a performance hit.
There is a bug filed against Forms to extend the menu files with a reports Object node. This could require a change to teh file structure which is why we looking for Forms 10i to implement this. (If it turns out that we can have it without recompiling the menu modules then it may go into a patch set - however this seems unlikely from my point of view)
Fran

How to have correct report from CP5?

Similar Messages

Maybe you are looking for