How to have CR auto connect to DB?

I have an Advantage DB (Sybase) and when I open Crystal Reports - it asks to connect to the database. I then have to go thru the DB setup to add the login name/pwd then the database .add file. CR shows the connection and works fine until I close it. When I reopen - I need to go thru all that again.
Is there a way to get the DB info to stick so the user does not have to enter this in every time?

Create a new report and use the database wizard, once connected check on the option to use Trusted Authentication. If your DB can use this feature then it should not prompt anyone who has rights to the database. If it' snot an option then no work around. Dangerous saving passwords in the report, anyone could make changes and have full rights to all data.
Don

Similar Messages

How to disable Bluetooth Auto-Connect

Hello Everybody
I have a JBL Micro-Wireless Bluetooth enabled speaker.
My Laptop model is Lenovo Thinkpad X220 running Windows 7.
My laptop has Broadcom Bluetooth stack.
Now, the problem is, whenever i turn on the speaker, my laptop connects to it immediately.
But, It just shows as connected with JBL Micro-Wireless in Bluetooth Device Control
The Bluetooth Hands free audio in Available Playback Devices be kept disconnected and i won't be able to connect to it.
I won't be able to also disconnect the Bluetooth speaker in Bluetooth Device Control.
I found that, Either if i disable the Thinkpad Bluetooth 3.0 device in device manager and enable it back or Uptick and Tick Audo Sink service in JBL Micro-Wireless properties dialog box in Sound, i can connect to the speaker manually and it starts working
just fine and i can disconnect the speaker also any number times.
You can blame the Broadcom Bluetooth Drive Stack for this issue, but i have tried using the Microsoft Bluetooth Stack too.
You can now blame my JBL Micro-Wireless speakers for this issue, but, i don't have any problems with any other audio source.
So, you have to give solution to disable Auto-Connect for my Bluetooth Speaker from my Laptop.
My Bluetooth speaker don't have any interface to disable auto-connect.
I have tried stopping both the Bluetooth Services in Windows Services to disable Auto-Connection, but it didn't help.

Hi,
Untill now, there is no effective method in Windows to disable Bluetooth device connect automaticlly. Here is another workaround method maybe helpful.
That's using net stop/start service command to disable Bluetooth service.
Firstly, you can access Services by typing services.msc
command in RUN. Then choose Bluetooth service and change its startup type to
Manual.
Next time when you need using Bluetooth, just run net start bthserv in Command Prompt with administrator.
The bluetooth should be work normally.
When you didn't want to use it, just run net stop bthserv command to stop it.
Roger Lu
TechNet Community Support

How to have email "Auto-Skip" Inbox and put in Mailbox?

Not sure how to label a "Mail" question... sorry.
I have a few people who send me email ALL THE TIME (like 20 - 30 per day), unfortunately, I cannot delete or block them b/c occassionaly I need to read something they send me.... anyway....
I'm wanting to have their mail automatically skip the inbox, and go to a Mailbox I create for them. Unfortunately, Smart Mailboxes seemingly should have this ability, but I can't fingure it out. When I delete an email (that the Smart Mailbox has in it) from the Inbox, it disappears from both, so if I could "Auto-delete" it from the inbox, it would seemingly auto-delete from the Smart Mailbox too.
Oh well... can't figure this one out.

Hi Mike,
"Smart" boxes and ":Smart" folders don't really contain the documents—just a pointer to where the document itself may be found. When you delete the actual message, the pointer has no place to point, so it disappears.
What you are looking for is a "Rule" that will move these messages to a specific folder.
Rules are set in Mail Preferences > Rules.
Regards,
Barry
PS: Regarding 'labeling a Mail question': Mail and Address Book are categorized here as part of the System software, and should be placed in the community for the version of Mac OS X you are using (Snow Leopard), Your question itself clearly indicates it's a "Mail" question.
B.

How to have Itunes auto Sync after the podcast auto download? (for iphone 3gs- but I think it can be iphones in general)

I want to have itunes download the podcast first and then sync to my iphone automatically. It is in the reversed order, so I have to manual sync again after the auto downloads. How can I do this? Thank you

Contact the seller because the iPhone seems to be not unlocked. Only
the Carrier to which the iPhone is locked can unlock it. If it is an AT&T
iPhone, return it or sell it because AT&T will not unlock for anyone
for any reason.

How to have remote jdbc connection to timeten?

I think our admin have set up a timeten daemon , can I connect it remotely using JDBC connection? How the connection should be? Is it like
jdbc:timesten:192.168.1.2:dsn=my_dsn
??

To create a JDBC connection, you need to specify a TimesTen connection URL. The format of a TimesTen connection URL is: 
jdbc:timesten:{direct | client}:dsn=DSNname;[DSNattributes;]

For example, to create a client connection to the demo data store, the URL looks similar to the following:
String URL = "jdbc:timesten:client:dsn=demoCS";

For more information, please refer to the section "Connecting to a TimesTen data store" in the Oracle TimesTen In-Memory Database Java Developer's and Reference Guide.

How to have my iPad connect to iTunes on my husband's iMac

How can I get my iPad to show up on iTunes on my husbansd's iMac?

See Syncing with iTunes here > http://www.apple.com/support/ipad/syncing/

How to have an auto increment primary key in HDBDD

Hello,
Using a HDBDD file I am creating a table in which I need a primary key(recordId) which is auto generated by the DB.
What would be the way to do this?
My hdbdd file:
namespace sap.mobile.data;
@Schema : 'SAP_TEST'
context Sample {
@Catalog.tableType : #COLUMN
entity Details {
text : LargeString;
level : String(10);
timestamp : UTCTimestamp;
recordId : ?

Such syntax for calculated columns isn't supported yet by CDS/HDBDD. The work around people would use today is to use a Sequence in any logic that does an insert into this table.

Why does my Galaxy s4 wifi turn on even though I have unchecked auto connect? (This happened starting with the latest software update).

I also have wifi-matic app which should keep this from happening, but stopped doing so with the upgrade.

Check sleep mode to be sure Wi-fi is off. Shut down your wifi matic app, clear system cache and do a soft reset of your device. power phone on and reset your personal settings. go into Wi-fi and do your setup again.

How to have both auto font enabled as well as a starting size.

Looking for a way to autmatically downsize the font, but start out at a predetermined size.
i.e. Form is automatically Helvetica size 12. But when the Text Field gets too full it automatically decreases the Size of the Font.
Thank You!

You can do this by setting the font size to Auto and then adjust the height of the field so the resulting font size is 12. I realize this is less than ideal, but it is about the best you can do.

How to disable auto connect feature in SQLDeveloper's connections manager

Hi Guys,
I work with SQLDeveloper 2.1.1 (Patch 1)
It attempts to connect to the target always after you Right click on saved connection from within the connections' manager list.
Does any one know how to disable that auto connect feature in SQLDeveloper?
Any help would be appropriated.
Cheers!!

Hi, a good question:
Here's my list of extensions installed:
- Open Insider View (4thelephant) Insider SQLDeveloper
- Oracle SQLdeveloper data modeler viewer
- Oracle SQLdeveloper Migrations - MS Access
- Oracle SQLdeveloper Migrations - MySql
- Oracle SQLdeveloper TimesTen
- Versioning support.
That's all what i can see in extensions window.
Cheers!!
eMarcel

How to disconnect a USB device that auto-connects to my iMac

I have a third-party device that gathers medical data that can be uploaded to my computer via USB. Now, however, I want to upload it to a web-based application application that runs only on Windows. I run Windows 7 on a virtual machine via Parallels 7. The problem is that when I plug the medical monitoring device into the USB port it automatically connects to the Mac, and I cannot see it from the Windows desktop. Plugging it in no longer gives me the option of connecting to the Mac or the PC. (I think I did an "Alt [right click]" the first time I connected via the USB cable.) So, how can I now force that auto-connect to disconnect? Thanks.

Hi Bob, I remember doing something like that...
On the Mac side eject it without removing it, then on the Win/Parallels side look for that USB thing setting/add device or whatever.

How to disable auto connecting to internet?

Hi, I have some problems with nokia n97 mini. The problem is auto connectig to internet, then i disable active connections, after ~30 seconds it auto connects again. So how disable this ?
Thanks.

menu,settings,connectivity,admin settings,packet data and select when needed
this shoulrd stop this
also as pointed out above if you have an email client or app that requires connection tjese would have to be removed
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

I am connected to my usual wifi and when I try to go onto any apps which require internet connection, it says I have no internet connection yet I am connected to wifi, how do I resolve this?

I am connected to my usual wifi and when I try to go onto any app's which require Internet connection, it says I have no Internet connection yet I am connected to wifi, how do I resolve this?I have had this problem for about a week.
Any responses are appriciated

You posted in the iPad forum, but you profile lists an iPhone 4S. Does your iPhone or iPad have this problem.
Here's some iPad suggestions. Most also apply to the iPhone. Your iPhone or iPad may show the wifi symbol but that only shows the presence of a wifi signal. Not that you are connected.
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Fix WiFi Issue for iOS 7
http://ipadnerds.com/fix-wifi-issue-ios-7/
Fix WiFi Issue for iOS 7
http://ipadnerds.com/fix-wifi-issue-ios-7/
iOS 6 Wifi Problems/Fixes
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
10 Ways to Boost Your Wireless Signal
http://www.pcmag.com/article2/0,2817,2372811,00.asp
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

How to auto-connect to external server upon startup?

Is there a way that a user could by-pass "Connect to Server" and have the workstation auto-connect to an external, but in-house server each time the work-station is booted up? Also, is there a way to have it connect to this server without having to enter a password each time? Thanks in advance.

Is there a way that a user could by-pass "Connect to
Server" and have the workstation auto-connect to an
external, but in-house server each time the
work-station is booted up?
after you mount the share, drag the icon to sys pref -> accoutns -> login items
Also, is there a way to
have it connect to this server without having to
enter a password each time? Thanks in advance.
use apple+k to connect to the share, enter the share name as:
smb://your-user-name@server/share
keychain should remember the password for you.

How do I add to my data plan on the iPad once I have run out of time and no longer have an internet connection?

How do I add to my data plan on the iPad once I have run out and no longer have an internet connection? I am working out of the country and got a message that I was running low,followed immediatly by a you're out message.

Should you not be asking your carrier? They are the people supplying your data plan.

How to have CR auto connect to DB?

Similar Messages

Maybe you are looking for