How to have creative p5800 in 5.1 mode and a microphone at the same t

Hello everybody,
pls, can somebody advise, how can i use my creative p5800 in 5. mode and at the same time to have microphone working properly.
for the moment i have installed my creative as stereo speakers and the mic is plugged?into the sound card, which is not very conviniet, because my rear speakers are not working.
i would be very greatful if somebody can help me.
0x in advance

I'm not really sure what you mean.
Which soundcard do you have exactly? If it's one of ours, you should be able to use the outputs on the back to connect your speakers (and set the speaker selection to 5.) and connect the microphone. As long as the microphone is set up correctly in the mixer, and is selected as the recording source, then it should work fine.
Cat

Similar Messages

  • In Pages 5.2.2: How do you go from 1 column to 2 and keep them on the same page?

    In Pages 5.2.2: How do you go from 1 column to 2 and keep them on the same page?

    Sorry, I tried to say your answer solved my question, but I guess I told it that my response to you solved it. Now that I liked it, the solved option doesn't appear.

  • How do I load balance TFTP between two servers and a client on the same subnet?

    Hi,
    I have trawled through several documents and tried umpteen different configs, all to no avail. I have a PXE boot client trying to access a boot file via TFTP from a couple of TFTP servers on the same VLAN/subnet. For HA purposes I want to load balance the two TFTP servers.
    Config is currently;
    =====
    probe icmp ICMP_PROBE
      description icmp probe for default gateway tracking
      interval 5
      passdetect interval 15
    rserver host server1
      description Server1
      ip address 10.0.0.1
      inservice
    rserver host server2
      description Server 2
      ip address 10.0.0.2
      inservice
    serverfarm host serverfarm_01
      description servers used
      probe ICMP_PROBE
      rserver server1
        inservice
      rserver server2
        inservice
    class-map match-all L4_VIP_TFTP
      10 match virtual-address 10.0.0.10 udp eq 69
    policy-map type loadbalance first-match L7_TFTP
      class class-default
        serverfarm serverfarm_01
    policy-map multi-match L4_LB_VIP_POLICY
      class L4_VIP_TFTP
        loadbalance vip inservice
        loadbalance policy L7_TFTP
        loadbalance vip icmp-reply active
    nat dynamic 1 vlan 200
    interface vlan 200
      ip address 10.0.0.250 255.255.255.0
      nat-pool 1 10.0.0.241 10.0.0.243 netmask 255.255.255.255 pat
      service-policy input L4_LB_VIP_POLICY
      no shutdown
    ip route 0.0.0.0 0.0.0.0 10.0.0.254
    =====
    I have read the doco by Ivan Kovacevic amongst many others but as my clients and servers are on the same subnet, the config doesnt work.
    Can anybody point me in the right direction please. The devices are ACE 4710 running A3(2.3).
    Thanks

    Try using the following configuration:
    Note: Please make sure to configure also a udp probe to probe udp port 69, in case the application is down.
    You need to configure a management policy on the interface when using a UDP probe.
    That is because, when port 69 on the server will be unreachable, the server will send an ICMP unreachable.
    ACE will consider a udp probe as "failed" only when it sees ICMP unreachable.
    Without a management policy-map, the ICMP unreachable message will be dropped.
    Also, add an ICMP probe to the rserver because udp probe will not be enough when the physical interface will be down.
    That is because UDP is a connection-less protocol. To consider a UDP probe successfull, ACE need to see NO answer from the server in respose to the probe.
    The ACE will not see any answer from the server when the interface is down and thus, will consider the probe as "sucessful".
    With ICMP probe attached to the rserver, you also test the reachability of the server and not only the UDP port.
    Here is the configuration (of course, you can chage the names of the of the objects to the name you are using if you want) :
    access-list ALL line 10 extended permit ip any any
    probe udp TFTP
      port 69
      interval 5
      passdetect interval 15
    probe icmp ICMP_PROBE
      interval 5
      passdetect interval 15
    rserver host TFTP_1
      ip address 10.0.0.1
      probe TFTP
      probe ICMP_PROBE
      inservice
    rserver host TFTP_2
      ip address 10.0.0.2
      probe TFTP
      probe ICMP_PROBE
      inservice
    serverfarm host TFTP-SFARM
      rserver TFTP_1
        inservice
      rserver TFTP_2
        inservice
    sticky ip-netmask 255.255.255.255 address source TFTP-STICKY
      timeout 10
      replicate sticky
      serverfarm TFTP-SFARM
    class-map type management match-any MANAGE
      2 match protocol icmp any
    class-map match-all NAT
      2 match virtual-address 0.0.0.0 0.0.0.0 udp any
    class-map match-all TFTP
      2 match virtual-address 10.0.0.10 udp eq 69
    policy-map type management first-match MANAGE
      class MANAGE
        permit
    policy-map type loadbalance first-match ROUTE
      class class-default
        forward
    policy-map type loadbalance first-match TFTP-POL
      class class-default
        sticky-serverfarm TFTP-STICKY
    policy-map multi-match TFTP-MULTI
      class TFTP
        loadbalance vip inservice
        loadbalance policy TFTP-POL
        nat dynamic 1 vlan 212
      class NAT
        loadbalance vip inservice
        loadbalance policy ROUTE
        nat dynamic 2 vlan 212
    interface vlan 212
      ip address 10.0.0.250 255.255.255.0
      no normalization
      access-group input ALL
      nat-pool 1 10.0.0.241 10.0.0.243 netmask 255.255.255.0 pat
      nat-pool 2 10.0.0.10 10.0.0.10 netmask 255.255.255.0 pat
      service-policy input TFTP-MULTI
      service-policy input MANAGE
      no shutdown
    Let me know how it goes.
    Good luck!

  • How do I listen to music on my iMac and Bose Soundlink at the same time???

    I just bought a Bose Soundlink Color. However I can only listen to either the iMac or the soundlink. Not both at the same time. Can you do this and if you can how do I fix it. Thanks for any help.

    Welcome to the Apple Community.
    Use the multiple speakers option from the AirPlay menu.

  • Is it possible to have 2 separate accounts with totally different and independent music on the same computer?

    IS it possible to have 2 separate accounts with totally different music libraries on same computer with multiple iPods synced to the computer,

    Same answer as last time you asked the same question.
    Can I create 2 separate itune accounts on same PC?

  • I cannot restore my ipad. I have tried all I know to do and I keep getting the same error message. That it cannot be restores (1).

    Can someone give me tips on how to restore my ipad. It will not restore no matter what I try.

    See this support document for help with restore errors. Resolve iOS update and restore errors
    The problem is that most of the time the error 1 is generally a hardware error. However, follow the instructions in the support document and you may get by.

  • How to create Page, where will be 2 regions and 2 tabs on the same page?

    Hello to everyone!
    Please help me to resolve this problem. I want to create 2 separate Report regions on 1 page. But, I want to go to them using tab or region selector.
    Something like on http://apex.oracle.com/pls/otn/f?p=65555:54:4313065956899438::NO:::
    I want that when I go to Page i see tab named TEST1 and TEST2. Automaticaly will show TEST1 Region on page, when I click on TEST2 on the tab within page, i see TEST2 region.
    APEX 4.0.
    Thank you!
    Edited by: Sabutmaster on 02-Sep-2011 04:42

    Maybe there is another variant? Without jQuery? I found something like in Region Selector, but I don't need SHOW ALL option .
    Or maybeI can somehow remove SHOW ALL tab???
    Thank you!
    Edited by: Sabutmaster on Sep 4, 2011 11:58 PM
    Edited by: Sabutmaster on 05-Sep-2011 23:42

  • How to have a creative p5800 working in 5.1 mode and microphone at the same time

    pls, can somebody advise, how can i use my creative p5800 in 5.1 mode and at the same time to have microphone working properly.
    for the moment i have installed my creative as stereo speakers and the mic is plugged into the sound card, which is not very conviniet, because my rear speakers are not working.
    i would be very greatful if somebody can help me.
    10x in advance

    Duplicate thread.
    Cat

  • I have Creative Suite 5 Design  Premium (teacher and student edition), how can i upgrade to CS6 and

    I have Creative Suite 5 Design  Premium (teacher and student edition), how can i upgrade to cs6 and how much is it. I want to use it forAdobe Creative Suite 6  Design & Web Premium Digital Classroom Book ? I already bought the book thinking it was for Creative Suite 5 not 6 .I don't know where to get it any where else if anyone would be willing to help me out I would really Appreciate it alot. I would just return the book but Its past the return date. I bought the book at Barnes & Noble . I thought the Software would be included but I was wrong.
    Thank you for any help you can give me ~
    angelmia08

    If you are eligible for a new copy of the Teacher and Student edition, that is the way to go. It is generally cheaper to get new teacher/student versions than upgrade to a commercial version. However, with the Creative Cloud now available, I do not know if the CS 6 teacher/student versions are still available.

  • I have Creative Suite 5 production Premium (teacher and student edition), how can i upgrade to cs6?

    I have Creative Suite 5 production Premium (teacher and student edition), how can i upgrade to cs6 and how much is it. I need an upgrade for PS CS5 to use new RAW files of Canon 6D.
    thx for your help.

    Creative Suite 6
    If you are still eligible for S&T pricing, you simply buy a completely new discounted license of CS6.
    Mylenium

  • My iPod Classic is seen by Windows but not by iTunes.  I have reset it, gone to disk mode and it won't show up in iTunes.  There appears to be music on it in a file called MUSICSAVE.  How can I get this to work with iTunes again?

    My iPod Classic is seen by Windows but not by iTunes.  I have reset it, gone to disk mode and it won't show up in iTunes.  There appears to be music on it in a file called MUSICSAVE.  How can I get this to work with iTunes again?

    1. Update iTunes to the latest version. Plug in your iPod. If iTunes still can't recognize it, then in iTunes in the top left corner click help> run diagnostics. On the box that comes up, check the last two things. Click next and it should identify your iPod.
    2. Click on your windows start menu. Type in "services". Click on it and when it pops up, on the bottom of it click on "standard". Now Scroll down to find "Apple Mobile Device" Right click it when you see it and click on "Start". When it has started, close iTunes and replug in your iPod and it should show up.
    3. Check the USB cable
    4 Verify that Apple Mobile Device Support is installed
    5. Restart the Apple Mobile Device Service and verify that the Apple Mobile Device USB Driver is installed.
    6. If you just want to add some photos, songs and movies from computer to your devices, you can use an iTunes alternative to do the job
    7. Check for third-party software conflicts.
    <Link Edited By Host>

  • All of a sudden, my settings have been changed, my homepage, and EVERYTHING. No matter how many times I go in and change them again, the SAME pages open up when I start FireFox and I am constantly being asked if I want Yahoo as my start page and default s

    I don't know what happened. All of a sudden, my settings have been changed, my homepage, and EVERYTHING. No matter how many times I go in and change them again, the SAME pages open up when I start FireFox and I am constantly being asked if I want Yahoo as my start page and default search engine. I click the box 'do not ask me again' and it comes up EVERY TIME. I change things like I don't want history remembered, and when I reload FireFox again, it's back to the way it was BEFORE. EVERY SINGLE TIME. I don't know why this is happening, or how to fix it. What do I do??

    I do not want to download another virus program.. I do not believe it is a virus. I am running the full version of Norton 360 and it is doing a daily scan. I have Windows 7, 64 bit OS.
    This is very irritating !! If I wanted Yahoo I would ask for it !

  • I have 3 iphones, an ipod touch and an Ipad on the same itunes account.  should I have a different account for each device?  If so how do I get all my purchases, like music on all the devices?

    I have 3 iphones, an ipod touch and an Ipad on the same itunes account.  should I have a different account for each device?  If so how do I get all my purchases, like music on all the devices?

    You can sync as many devices as you want to the same iTunes account, there is no limit. You can have the same content on each device or different content, the choice is yours. iTunes will keep everything straight, by device, including separate backups. I'd suggest giving each device a unique name, to make things easier.

  • When I connect my ipod to my computer it opens my documents and won't show up in my itunes and I have unistalled then reinstalled itunes and reset my ipod twice and it stills does the same thing how can I make it so that it shows up in my itunes?

    When I connect my ipod to my computer it opens my documents and won't show up in my itunes and I have unistalled then reinstalled itunes and reset my ipod twice and it stills does the same thing how can I make it so that it shows up in my itunes?

    Try
    iOS: Device not recognized in iTunes for Windows
    I would start with              
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or              
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    Before you reinstall the Apple software, also remove iCloud vi Control Panel Remove programs. The reinstall the Apple programs
    New cable and different USB port?
    Runs this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    Try on another computer to help determine if computer or iPod problem

  • I have two Macs and I am using the same Apple ID on both.  All of my info, history etc is showing up on both.  How do I turn this off?

    I have two Macs and I am using the same Apple ID on both.  All of my info, history etc is showing up on both.  How do I turn this off?

    You likely have iCloud turned on in at least Safari. If you don't want Safari to sync between these devices turn one of them off. System Preferences - iCloud - Safari (uncheck the box)

Maybe you are looking for