How to have SAP pull the current user as of the document owner

Dear All,
We are using SAP88 PL21 US localization. When they create marketing document, they want to default the doc owner to the current user. Is there anyway we can setup in SAP? If we have to create UDV, where can I pull the current user code? Thanks.
Regards,
Yuyka

Hi Yuka.......
This is Possible by using Data Ownership Authorization........
Please check this also......
http://forums.sdn.sap.com/thread.jspa?threadID=1033556
Regards,
Rahul

Similar Messages

  • HT4314 I have a iPad and iPhone with the same Apple ID, but on Game Center I have used the same id for both devices and they are two different profiles and I was wondering how to have one of the accounts on both devices.

    I have a iPad and iPhone with the same Apple ID, but on Game Center I have used the same id for both devices and they are two different profiles and I was wondering how to have one of the accounts on both devices.

    Hi Jamesdwills,
    Welcome to the Support Communities!
    If you are using the same Apple ID on both devices, the Game Center profile should be the same.
    Check out this information from the iPad User Guide.  Try signing out of the Game Center on both devices and then sign back in with the correct Apple ID:
    Using Game Center
    http://support.apple.com/kb/ht4314
    Game Center settings - iPad User Guide
    http://help.apple.com/ipad/7/#/iPad9a13d039
    Game Center settings
    Go to Settings > Game Center, where you can:
    Sign out (tap your Apple ID)
    Allow invites
    Let nearby players find you
    Edit your Game Center profile (tap your nickname)
    Get friend recommendations from Contacts or Facebook
    Specify which notifications you want for Game Center. Go to Settings > Notifications > Game Center. If Game Center doesn’t appear, turn on Notifications.
    Change restrictions for Game Center. Go to Settings > General > Restrictions.
    Cheers,
    - Judy

  • HT3771 I Have a Kyocera FS-C2026MFP printer/scanner. How can I only pint the document in Black. I cannot work out how to not print in colour to save the inks!!

    I Have a Kyocera FS-C2026MFP printer/scanner. How can I only pint the document in Black. I cannot work out how to not print in colour to save the inks!!

    Welcome to Apple Support Communities. We're users here and do not speak for "Apple Inc." or "Kyocera Inc."
    http://usa.kyoceradocumentsolutions.com/americas/jsp/upload/resource/25359/0/Mac Driver3SoftwareGuide1.1.pdf
    On the printer driver documentation, Page 5, in the Imaging setting, although the options are not specifically shown, there should be an option on that screen of the print driver to click and select "B/W" or 'black and white' or 'grayscale' or 'monochrome' as Print Mode rather than the "Full Color" option shown in the illustration below.
    You access these settings once you have selected 'Print' from an app.
    If necessary, you might need to click on the 'Down arrow' button next to the printer name (OS X 10.6), or 'Show Details' button at the bottom of the print dialog box (OS X 10.8) to see additional settings.

  • HT4356 I don't have wireless printer. How can I print out the document?

    I don't have a wireless printer. How can I print out the document from regular printer?

    iOS AirPrint Printers  http://support.apple.com/kb/HT4356
    How to Print from Your iPad: Summary of Printer and Printing Options
    http://ipadacademy.com/2012/03/how-to-print-from-your-ipad-summary-of-printer-an d-printing-options
    Print from iPad / iPhone without AirPrint
    http://ipadhelp.com/ipad-help/print-from-ipad-iphone-without-airprint/
    How to Enable AirPrint on a Mac and Use Any Printer
    http://ipadhelp.com/ipad-help/how-to-use-airprint-with-any-printer/
    iPad Power: How to Print
    http://www.macworld.com/article/1160312/ipad_printing.html
    Check out these print apps for the iPad.
    Print Utility for iPad  ($3.99) http://itunes.apple.com/us/app/print-utility-for-ipad/id422858586?mt=8
    Print Agent Pro for iPad ($5.99)  http://itunes.apple.com/us/app/print-agent-pro-for-ipad/id421782942?mt=8   Print Agent Pro can print to many non-AirPrint and non-wireless printers on your network, even if they are only connected to a Mac or PC via USB.
    FingerPrint turns any printer into an AirPrint printer
    http://reviews.cnet.com/8301-19512_7-57368414-233/fingerprint-turns-any-printer- into-an-airprint-printer/
     Cheers, Tom

  • Have an Adobe PRO 11 user converting a word Document to PDF using PDFMAKER and all of the numbering is disappearing from left column,.  Has anyone had this happen and if so what is the fix?

    have an Adobe PRO 11 user converting a word Document to PDF using PDFMAKER and all of the numbering is disappearing from left column,.  Has anyone had this happen and if so what is the fix?

    Is it possible to post a sample page some place for us to try out (dropbox or acrobat.com)? Is your Acrobat updated? What version of WORD are you using?

  • When I try to eject my IPod I get a message telling me I cannot eject because another app is using it. Nothing else is running, so I just have to pull the plug

    When I try to eject my IPod after synching I get an error message that I cannot eject it because files are in use by another application. Nothing else's running so I just have to pull the plug. Why is this ??

    ok---I stopped the sync process of photos and now everything else syncs but still cannot eject my ipod.  Will try other tips on this website.  Thank you

  • I purchased a iMAC off eBay. I was wondering how do I take off the previous owner name and replace mines?

    Hi,
    I purchased a iMAC off eBay. I was wondering how do I take off the previous owner name and replace mines? I reset all passwords to log in,but his name in the mac keeps showing up.
    Thanks,
    Honey
    <Re-Titled By Host>

    Before buying a second-hand computer, you should have run Apple Diagnostics or the Apple Hardware Test, whichever is applicable.
    The first thing to do after buying the computer is to erase the internal drive and install a clean copy of OS X. You—not the original owner—must do that. Changes made by Apple over the years have made this seemingly straightforward task very complex.
    How you go about it depends on the model, and on whether you already own another Mac. If you're not sure of the model, enter the serial number on this page. Then find the model on this page to see what OS version was originally installed.
    It's unsafe, and may be unlawful, to use a computer with software installed by a previous owner.
    1. If you don't own another Mac
    a. If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc from the Apple Store or a reputable reseller—not from eBay or anything of the kind. If the machine is very old and has less than 1 GB of memory, you'll need to add more in order to install 10.6. Preferably, install as much memory as it can take, according to the technical specifications.
    b. If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for a MacBook Air. You should have received the media from the original owner, but if you didn't, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
    To start up from an optical disc or a flash drive, insert it, then restart the computer and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
    c. If the machine shipped with OS X 10.7 or later, you don't need media. It should start up in Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
    d. Some 2010-2011 models shipped with OS X 10.6 and received a firmware update after 10.7 was released, enabling them to use Internet Recovery. If you have one of those models, you can't reinstall 10.6 even from the original media, and Internet Recovery will not work either without the original owner's Apple ID. In that case, contact Apple Support, or take the machine to an Apple Store or another authorized service provider to have the OS installed.
    2. If you do own another Mac
    If you already own another Mac that was upgraded in the App Store to the version of OS X that you want to install, and if the new Mac is compatible with it, then you can install it. Use Recovery Disk Assistant to prepare a USB device, then start up the new Mac from it by holding down the C key at the startup chime. Alternatively, if you have a Time Machine backup of OS X 10.7.3 or later on an external hard drive (not a Time Capsule or other network device), you can start from that by holding down the option key and selecting it from the row of icons that appears. Note that if your other Mac was never upgraded in the App Store, you can't use this method.
    3. Partition and install OS X
    a. If you see a lock screen when trying to start up from installation media or in Recovery mode, then a firmware password was set by the previous owner, or the machine was remotely locked via iCloud. You'll either have to contact the owner or take the machine to an Apple Store or another service provider to be unlocked. You may be asked for proof of ownership.
    b. Launch Disk Utility and select the icon of the internal drive—not any of the volume icons nested beneath it. In the  Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive.
    c. An unusual problem may arise if all the following conditions apply:
              OS X 10.7 or later was installed by the previous owner
              The startup volume was encrypted with FileVault
              You're booted in Recovery mode (that is, not from a 10.6 installation disc)
    In that case, you won't be able to unlock the volume or partition the drive without the FileVault password. Ask for guidance or see this discussion.
    d. After partitioning, quit Disk Utility and run the OS X Installer. If you're installing a version of OS X acquired from the App Store, you will need the Apple ID and password that you used. When the installation is done, the system will automatically restart into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
    e. Run Software Update and install all available system updates from Apple. To upgrade to a major version of OS X newer than 10.6, get it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the original owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed—you have to repurchase them.
    4. Other issues
    a. If the original owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're irrevocably linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Mac App Store Customer Service has sometimes issued redemption codes for these apps to second owners who asked.
    b. If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able to  authorize it immediately under your ID. In that case, you'll either have to wait up to 90 days or contact iTunes Support.
    c. When trying to create a new iCloud account, you might get a failure message: "Account limit reached." Apple imposes a lifetime limit of three iCloud account setups per device. Erasing the device does not reset the limit. You can still use an iCloud account that was created on another device, but you won't be able to create a new one. Contact iCloud Support for more information. The setup limit doesn't apply to Apple ID accounts used for other services, such as the iTunes and Mac App Stores, or iMessage. You can create as many of those accounts as you like.

  • I got an iPad mini from a friend who is now passed away and I'm trying to activate it using my Apple ID but it won't let me because I have to contact the previous owner, what do I do!?

    I got an iPad mini from a friend who is now passed away and I'm trying to activate it using my Apple ID but it won't let me because I have to contact the previous owner, what do I do!?

    Take it, the original purchase receipt, and the friend's death certificate to a physical Apple Store and see what they say.
    (110829)

  • My setup: iMac hardline to Canon i960 printer. Issue: endless printing of the same document. The printer window states that the pinter is in use and there is nothing listed in the Print Queue.  How can I stop printing the document?

    My setup: iMac hardline to Canon i960 printer. Issue: endless printing of the same document. The printer window states that the pinter is in use and there is nothing listed in the Print Queue.  How can I stop printing the document?

    Soution: Delete the printer and add the same printer back in, therefore creating a new print queue.

  • How do you write on the documents useing using work space

    how do you write on the documents using work space

    What type of documents are you trying to write on?

  • HT5621 I got iphone 4s secondhand and i made restore then its asking me for apple Id which i don't  have it even the first owner i ask him about it but he don't have? please i need your HELP

    I got iphone 4s secondhand and i made restore then its asking me for apple Id which i don't  have it even the first owner i ask him about it but he don't have? please i need your HELP

    No one here can help you, nor can/will Apple. If you don't know the Apple ID/Password that was originally used to activate this phone, you won't be able to re-activate it. And, if the previous owner tells you that he/she doesn't know it, you're out of luck. You simply won't be able to use the phone for anything other than a paperweight.
    Called Activation Lock.

  • I used to be able to click on a .PDF document and read it directly within Firefox ... since the latest upgrade, that feature doesn't seem to work ... now, I have to download the document and read it locally ... any fixes ???

    Question
    I used to be able to click on a .PDF document and read it directly within Firefox ... since the latest upgrade, that feature doesn't seem to work ... now, I have to download the document and read it locally ... any fixes ???

    Go to Options>Applications>click on, in your case, Adobe Acrobat entries and select "Use Adobe Acrobat(in Firefox)" or as you wish.

  • Pages and numbers will not take dictation and iOS 8. Very frustrating screen goes blank no keypad. I have to close the document In order to get rid of the big blank space where the keyboard should ber

    Pages and Numbers will not take dictation in iOS 8 on my iPad 4 and iPad mini.
    Very frustrating -screen goes blank where keyboard should be when I touch the microphone- no keypad & dictation does not record. I have to close the document In order to get rid of the big blank space where the keyboard should be. When is this going to be fixed?it's making recordkeeping Pages and Numbers,  which I use heavily, almost impossible.
    also dictation in other locations such as Mail put capitals in the middle of sentences and sometimes don't capitalize first letter in a sentence (see first letter of this sentence!) and other instances like the months of the year or the days of the week. Is anyone else having these problems?

    Pages and Numbers will not take dictation in iOS 8 on my iPad 4 and iPad mini.
    Very frustrating -screen goes blank where keyboard should be when I touch the microphone- no keypad & dictation does not record. I have to close the document In order to get rid of the big blank space where the keyboard should be. When is this going to be fixed?it's making recordkeeping Pages and Numbers,  which I use heavily, almost impossible.
    also dictation in other locations such as Mail put capitals in the middle of sentences and sometimes don't capitalize first letter in a sentence (see first letter of this sentence!) and other instances like the months of the year or the days of the week. Is anyone else having these problems?

  • How to get a list of current users and their transactions code?

    SM04 and AL08 give the list, but its not comprehensive.  in sm04, we have to click the username and select sessions and then a
    new popup comes giving all transactions for the user. 
    I want a list such that each and every transaction corresponding to the user is listed at same time.

    Hi,
    Use the FM TH_LONG_USR_INFO.
    Just give parameter user as * (it means all users, other wise current user)
    It will give ALL transactions for ALL users.
    Regards,
    Amit Mittal.
    Edited by: Amit Mittal on Dec 30, 2009 1:00 PM
    Edited by: Amit Mittal on Dec 30, 2009 1:03 PM

  • How to pull the document stored in external storage system ?

    Hi,
    We are having one external storage medium to store( planning to do so) SAP documents. In our case it is filenet server.
    My concern is .
    How can we pull the doc from the filenet server (external storage medium)?. I am in need, how and what an abap development team needs to be done?.
    Can anyone help in this regard ....to get the best logic and best technique ....!!!
    Thanks in advance
    Pons.

    Hi Ponnuchamy,
    to solve your issue RFC is an ideal one ,basically it consists of sender and receiver profiling destination configuration etc.
    Chk these links for further clarification
    http://help.sap.com/saphelp_nw2004s/helpdata/en/5a/97a066223e440b8ead3da027b17d9e/content.htm
    http://help.sap.com/saphelp_46c/helpdata/en/22/0424ba488911d189490000e829fbbd/frameset.htm
    Thanks and Regards
    Srikanth.P

Maybe you are looking for