How to hide a number on cucm 8.5

Hi guys,
I'd like to know how to hide the number of the caller on cucm 8.5
I'm not a pro, could someone explain to me step by step please
Thank you for ur time
Regards

OK, if you want to change this for all calls simply adjust "Calling Line ID Presentation" to RESTRICTED on
all Route Patterns pointing to PSTN. If you want to do this only for some users you will need to copy all the route patterns and assign them different partition reachable from that phone.
If you want it to work on demend, i.e users dial *67 followed by the number to block caller ID, copy the existing route patterns and add *67 to the front and set this "Calling Line ID Presentation" to RESTRICTED.
HTH, please rate all useful posts!
Chris

Similar Messages

  • How to hide page number in the table of content

    Hi,
    I'd like to know how to hide page number in the ToC. They show automatically, but at least for the headings of third ad fourth order I'd like to suppress/omit them.
    Thanks for any advice!

    You have in the Inpspector > Document tab > TOC > uncheck button for #'s

  • How to hide port number??

    Hi All,
    How can we hide the 10g OCS port number, so that people from outside my office network can't access the server. This is for security reason. Or any other solution for this.
    My installation is on single machine. Please help me.
    Thanks

    Hi!
    I can think of two possibilities:
    a) Protect your machine by a firewall
    b) Before using the Collaboration Suite, people need to log in; don't give them accounts
    The documentation describes in detail how to secure a OCS installation, although I believe that your environment will differ greatly with those described. Most of the examples focus on protection towards the internet.
    cu
    Andreas

  • How to hide Personnel Number Column in FI txns.

    Hi all,
    As you know in FI there are many transactions, for example FB03 allows you to display a document and you can then click 'Select Layout' and change the layout to include the Personnel Number field.
    I do not want many of my end-users to be able to display this Personnel Number field because they would be able to see what others are earning.
    I can't see any authorisation check in the program code that checks for an auth-obj such as p_pernr.
    Can anyone tell me how to go about preventing users listing the Personnel Number field in the various FI transactions.
    Many thanks.
    Babak

    Do you have HR in the same system and client as your FI? Or is it external (perhaps even non-SAP?)?
    Some general comments:
    You can deactivate line item display on the accounts which these "FI postings" go to.
    Manual postings on "earnings" are not "normal"... At most, a different adjustment account might be a good idea.
    You can protect the account using the (optional!) protection mechanism of account groups, and authority to maintain account groups. This should work for FB03 as transaction context. Try searching for "F_BKPF_BES" (and BEK and BED) and F_SKA1_BUK (and KNA1 and LFA1) for more infos.
    Kind regards,
    Julius

  • How to hide phone number in SMS

    Hello,
    My phone number is hidden when I call, but shows up in SMS.
    Is there a way to block that too?
    Vancehn
    Solved!
    Go to Solution.

    Your welcome, in certain countries and some carriers, and or certain networks on older phones (not sure about the newer phones) there was some inovated ways to hide the # and there still might be someone somewhere who comes up with a way.
    I know there is a App for phones that lets you change your #, someone can see that # but if they call you back you can change that # again, there are also Apps to block certain #'s,  so a search on the Web might turn up something.
    I hope if you find something it will be for good intent, and if you do please come back and tell us.

  • Hide "my number" doesn't work

    I got a new 8900 replacement (under warranty) and I know this worked on my old phone but somehow it's not working on this new one.
    Inside the Call log, menu >> options>>general options>>
    Show "My Number " = NO
    But my number still shows up whenever i'm making a phone call.
    I tried turn off and on. Battery pull too.  Double checked after battery pull, and it is "NO"...
    Help?
    Thanks.

    the show my number option is whether you want to see your number on the call screen, when you dial a number it shows your number, that's all that does. I'm not 100% sure how to hide your number but it might be the "restrict my identity" option on the same menu

  • How to hide the PORT NUMBER from the URL

    Hi,
    We have Application on Node 1 and Database on Node 2
    Apps Version: 11.5.10.2
    DB: 9.2.0.6
    We recently added a new node to act as web server for iSupport.
    Now we are able to access the url using public Ip-address which looks like
    http://<Internet Ip-Address>:<PORT NUMBER>
    Eg: http://******.com:8000
    But we dont want the *'PORT NUMBER(8000)'* to be displayed.
    How to hide the port number ?..
    Thanks in Advance,
    Mahesh

    Hi Hsawwan,
    Can you plz explain me the steps how to hide the port number from the url as our network administrator is not aware of this.
    Regards,
    Mahesh

  • How to hide the file name (the bizarre number assigned by the camera) when exporting an image version in aperture from an album. Pl understand I want to keep the file name in the project library version.

    how to hide the file name (the bizarre number assigned by the camera) when exporting an image version in aperture from an album. Pl understand I want to keep the file name in the project library version.

    Within Aperture you have Images, which are constructed on-the-fly from two files (the Master and the Version).  You get an image-format file _only_ when you export an Image.  You select the file name (usually a scheme) when you create an image-format file (that is, when you export).  Look under "Aperture→Presets→File Naming" for built-in Presets.  You can, of course, create your own or customize any provided.
    The Preset is applied to only the file newly created by your "export" command.  It is not applied to the Image in Aperture (unless you rename your Versions or your Masters).

  • How can I hide the number of unread eMails on my mail-symbol in my dock?

    Hello,
    I don't want to be disturbed while I am working so I am trying to hide the number of unread mails in my dock-symbol. I remember, that - some years ago - I could switch my preferences to not show any mails in my dock, but with the new Lion, I can just select wether I want to show all the unread mails or just the unread mails listet in my inbox.
    Any suggestions, how I can hide the number of unread eMail in my dock?
    Thanks a lot in advance
    Eike

    If you go to Settings>Notification Centre>Mail each of your email accounts will appear here separately. You can then change if Badges are displaye on the Mail App - which will show you the number of emails - or not.
    Regards,
    Steve

  • How to hide or masked my Lync 2013 phone number?

    I need to make outbound calls in France, Belgium and Switzerland, to our customers, but I don't want that they see my Lync phone number and call me back. Is there any chance to hide my number or just to masked it?

    Hi,
    Lync Server provides a way to manipulate the caller ID for outbound calls using
    Configuring Caller ID. An administrator can do that by using Lync Server Control Panel Voice Routing—Voice Routes interface to suppress the caller ID and replace it with a specified alternative caller ID.
    Also, you can configuration calling number translation rules in trunk configuration.
    Best Regards,
    Eason Huang
    Eason Huang
    TechNet Community Support

  • How to find Negative number

    can any one pls tell me how to find negative number ?
    Thanks

    1. One easy method is to look for the giveaway dash in front of the number, e.g. "-1" is a negative number, given the "-" instead of the "1."
    2. Negative numbers can also sneakily be found by multiplying i by itself: i^2^ is a negative number.
    3. Negative numbers can hide in the exponent of e as complex numbers. e.g. e^i*pi^ is a negative number.
    4. If we're referring to Java here, perhaps the following could be of some use:
    final int ZERO = 0;
    public static void main(String[] args) {
    int a = 3;
    int b = -13;
    System.out.println(a + " is negative? " + lessThanZero(a));
    System.out.println(b + " is negative? " + lessThanZero(b));
    boolean lessThanZero(int n) {
    return n < 0;
    }

  • How to hide dynamic parameters values in the URL with Reports 6i

    Hi,
    I want to know a way of hiding the parameters values when asking for a report through the web.
    Now I'm using the Reports 3.0.5.8 with a Cartridge defined in the Oracle Web Application Server 3.0.1.0.1. When you ask for a report with the parameters DESTYPE = cache and DESFORMAT = pdf, it is fully generated and in the Address or Location box of the browser, you can see http://webserver/cache/report.pdf (where cache is the virtual directory defined in the OWAS in which the .pdfs are cached). So, users cant see the Url used to generate the report.
    Im trying to upgrade this configuration to Reports 6i with Cgi in a web server. I generate reports with no problems. The problem I have is I cant find how to hide the parameters values as before. I mean, when I ask for a report, once its generated I can see http://webserver/cgi-bin/rwcgi60.exe?server=ServerName&report=report.rdf&userid=user/pass@connection&destype=cache&desformat=pdf&P1=value1&P2=value2 in the Location box. It allows user to ask for another report changing the values of the parameters. I use these parameters to execute some query written in the Data Model. For example, imagine that the P1 represents the company id, the user (that is supposed to see only data of its company) can change this id, ask for a new report and see data of another company.
    Ive already tried to use the key mapping option, but its not useful to me because the parameters values are dynamic and its impossible to define different entries in the cgicmd.dat for each possible value. The option of loading the parameter form before running a report is not useful to me either, because there exists specific screens for this purpose.
    Is there any solution?
    Thank you.
    Marma Bonfiglio.

    Hi Rakesh,
      I am using BI  7.0
    The last option I have is 'Hide' for 'Calculate single values as' .
    I have the below options  for 'Calculate single values as'
    1. Normalise  according to Next group  level  Resul.
    2. Normalize according to  Overall Result
    3. Rank number
    4.Olympic Rank Number
    5.Maximum
    6. Minimum
    7.Counter for all detailed values
    8.Counter for all detailed values that are non zero
    9.Moving average
    10.Moving average  That is  Not zero ,null or Error
    11. Hide.
    So could you please tell me where i can find 'suppress result' option for the keyfigure .
    Many thanks

  • How to set the number of records displayed at run time

    Is it possible to set the number of records displayed block property at run time? The built-in 'GET_BLOCK_PROPERTY' can retrieve the number of RECORDS_DISPLAYED. But I can't find SET_BLOCK_PROPERTY to set this property. Is there anyway I can set this property programmatically? Thanks for any suggestions!

    Bookmark Go to End
    goal: How to vary the number of records displayed in a block
    programmatically
    fact: Oracle Forms Developer
    fix:
    Block property 'Number of Records Displayed' can not be changed during runtime
    using SET_BLOCK_PROPERTY. However, it is still possible programmatically change
    the visual appearance of the form so that it creates effect of changing this
    property. To achieve such an effect follow these steps:
    1. in Forms Builder, in the multirecord block define the new set of items.
    The simplest way is to copy/paste the original item and rename created item.
    2. set properties of these new items so that they are the same as the properties
    of the original items. If these new items were copied from original items
    then properties are already the same. Modify following properties
    'Database item' on new items to value 'No'
    'Synchronize with item' to the value of the original item
    'Number of Items Displayed' to desired value.
    'Visible' to 'No'
    In other words, these new items are mirrors of original items.
    3. code event, which is meant to trigger the change in block appearance.
    This code should use SET_ITEM_PROPERTY built-in to set properties
    like 'VISIBLE', 'ENABLED', 'NAVIGABLE', 'UPDATE_ALLOWED' and others
    to desired value for items which are about to be displayed, then
    move cursor to one of these just displayed items with GO_ITEM built-in
    and then hide the previously displayed items.
    Example:
    Assume that the block is built on SCOTT.DEPT schema. Following will
    change the set of displayed items
    set_item_property('dept.mdeptno',visible,property_true);
    set_item_property('dept.mdname',visible,property_true);
    set_item_property('dept.mloc',visible,property_true);
    set_item_property('dept.mdeptno',enabled,property_true);
    set_item_property('dept.mdname',enabled,property_true);
    set_item_property('dept.mloc',enabled,property_true);
    set_item_property('dept.mdeptno',update_allowed,property_true);
    set_item_property('dept.mdname',update_allowed,property_true);
    set_item_property('dept.mloc',update_allowed,property_true);
    set_item_property('dept.mdeptno',navigable,property_true);
    set_item_property('dept.mdname',navigable,property_true);
    set_item_property('dept.mloc',navigable,property_true);
    go_item('dept.mdeptno');
    set_item_property('dept.deptno',visible,property_false);
    set_item_property('dept.dname',visible,property_false);
    set_item_property('dept.loc',visible,property_false);
    Regards,
    Monica

  • How to control the number of fields in the Advanced mode in af:query

    Hi,
    How to control the number of fields in the Advanced mode in <af:query>?
    Say i have 20 fields in my table and i created a view criteria with 2 fields. It would work perfectly in Basic mode. But in the Advanced mode all other fields selection is possible on clicking the ADD Fields button. I did not want the client to make a search with all 20 fields. Only 10 fields are to be listed in the Advanced Mode even though there are 20 fields in my table.
    How do i control the list of fields in ADDFields button?
    Any ideas?
    KR

    You can uncheck the Querable property of the attributes which you need not show up in the Advanced Mode (but they will not show up in other modes too !) or programatically set the same as mentioned here -
    http://adfcodebits.blogspot.com/2010/11/bit-27-setting-view-object-attributes.htmlAlso you can hide the AddFields button as suggested here - http://www.notjustjava.com/2011/12/cool-tips-to-showhide-components-of-the-query-control-of-adf/

  • How to hide Header Page in Report Builder 6.0

    Hi,
    I am trying to modify the existing report. My requirement is to add a cover page to the report. Based on condition the cover page should not be displayed.
    Ex: If currency='USD' then
    cover page along with the report body
    else
    if currency = NULL then
    report body should be displayed.
    I wrote a format trigger on cover page frame. but it is displaying blank page as first page. It should not display blank page.
    Format trigger:
    function M_Cover_Page1FormatTrigger return boolean is
    begin
    if (:CP_currency IS NULL)
    then
    return (FALSE);
    end if;
    return (TRUE);
    end;
    Please help me out how to hide header page in report.
    Thanks & Regards,
    Sateesh kumar S

    Patchset 1663658 
    Simple Search  Advanced Search  Quick Links  Saved Searches  
    Description Forms & Reports 6I-PATCH-4 for (NT,95,98,2000) 
    Product Oracle Developer Family 
    Release  6i 
    Platform or Language    -------- Platforms --------Microsoft Windows (32-bit) 
    Last Updated 11-MAY-2001 
    Size N/A 
    This patchset is obsolete in this platform and language. Please see the reason stated below. Please contact Oracle Support for replacement patch. 
    Reason for Obsolescence
    Forms&Reports 6i-Patch-4 for WindowsNT has been obsoleted, owing to the fact that a later verison, <b>patch-4a is now available for download via metalink</b> 
    Patchsets known to include or supersede Patch 1663658  
    No information available from the patch repository
    Download Notes 
    Click here for the UNZIP utilities for most platforms.
    You may also download patches using any FTP client by connecting to updates.oracle.com. Connect with your Metalink username and password and read the welcome banner for more instructions. Looks like you want patchset 1747364 now. As soon as you get into Metalink, change the Quick Find drop down to be "Patch Number" and put "1747364" into the search text box. This should pull up the patch you need.

Maybe you are looking for